Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3
VM1: eth0 ip: 192.168.122.207 MTU 1800
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1800

Reproduce:
VM1 send 1600 bytes UDP data to VM3 using tools scapy with flags='DF'.
scapy command:
send(IP(dst="192.168.123.240",flags='DF')/UDP()/str('0'*1600),count=1,
inter=1.000000)

Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
    ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
    OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 6 0 2 2 0 0 2 4 0 0 0 0 0 0 0 0 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
    ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
    OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 7 0 2 2 0 0 2 5 0 0 0 0 0 0 0 1 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
ForwDatagrams is always keeping 2 without increment.

Issue description and patch:
ip_exceeds_mtu() in ip_forward() drops this IP datagram because skb len
(1600 sending by scapy) is over MTU(1500 in VM2) if "DF" is set.
According to RFC 4293 "3.2.3. IP Statistics Tables",
  +-------+------>------+----->-----+----->-----+
  | InForwDatagrams (6) | OutForwDatagrams (6)  |
  |                     V                       +->-+ OutFragReqds
  |                 InNoRoutes                  |   | (packets)
  / (local packet (3)                           |   |
  |  IF is that of the address                  |   +--> OutFragFails
  |  and may not be the receiving IF)           |   |    (packets)
the IPSTATS_MIB_OUTFORWDATAGRAMS should be counted before fragment
check.
The existing implementation, instead, would incease the counter after
fragment check: ip_exceeds_mtu() in ipv4 and ip6_pkt_too_big() in ipv6.
So do patch to move IPSTATS_MIB_OUTFORWDATAGRAMS counter to ip_forward()
for ipv4 and ip6_forward() for ipv6.

Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
    ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
    OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 6 0 2 2 0 0 2 4 0 0 0 0 0 0 0 0 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
    ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
    OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 7 0 2 3 0 0 2 5 0 0 0 0 0 0 0 1 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
ForwDatagrams is updated from 2 to 3.
Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231011015137.27262-1-heng.guo@windriver.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Leon Romanovsky says:

====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org

This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).

These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.

[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/

* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Handle IPsec steering upon master unbind/bind
  net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
  net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
  net/mlx5: Add create alias flow table function to ipsec roce
  net/mlx5: Implement alias object allow and create functions
  net/mlx5: Add alias flow table bits
  net/mlx5: Store devcom pointer inside IPsec RoCE
  net/mlx5: Register mlx5e priv to devcom in MPV mode
  RDMA/mlx5: Send events from IB driver about device affiliation state
  net/mlx5: Introduce ifc bits for migration in a chunk mode

====================

Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sabrina Dubroca says:

====================
net: tls: various code cleanups and improvements

This series contains multiple cleanups and simplifications for the
config code of both TLS_SW and TLS_HW.

It also modifies the chcr_ktls driver to use driver_state like all
other drivers, so that we can then make driver_state fixed size
instead of a flex array always allocated to that same fixed size. As
reported by Gustavo A. R. Silva, the way chcr_ktls misuses
driver_state irritates GCC [1].

Patches 1 and 2 are follow-ups to my previous cipher_desc series.

[1] https://lore.kernel.org/netdev/ZRvzdlvlbX4+eIln@work/
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

driver_state is a flex array, but is always allocated by the tls core
to a fixed size (TLS_DRIVER_STATE_SIZE_{TX,RX}). Simplify the code by
making that size explicit so that sizeof(struct
tls_offload_context_{tx,rx}) works.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

chcr_ktls uses the space reserved in driver_state by
tls_set_device_offload, but makes up into own wrapper around
tls_offload_context_tx instead of accessing driver_state via the
__tls_driver_ctx helper.

In this driver, driver_state is only used to store a pointer to a
larger context struct allocated by the driver.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify do_tls_setsockopt_conf a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not really needed since we end up refetching it as tls_ctx. We
can also remove the NULL check, since we have already dereferenced ctx
in do_tls_setsockopt_conf.

While at it, fix up the reverse xmas tree ordering.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not really needed since we end up refetching it as tls_ctx. We
can also remove the NULL check, since we have already dereferenced ctx
in do_tls_setsockopt_conf.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify tls_set_device_offload a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most values are shared. Nonce size turns out to be equal to IV size
for all offloadable ciphers.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify tls_set_sw_offload, and allow reuse for the tls_device code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify tls_set_sw_offload a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS_MAX_IV_SIZE + TLS_MAX_SALT_SIZE is 20B, we don't get much benefit
in cipher_context's size and can simplify the init code a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's defined in include/net/tls.h, avoid using an overly generic name.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS_MAX_REC_SEQ_SIZE is 8B, we don't get anything by using kmalloc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should never reach tls_device_reencrypt, tls_enc_record, or
tls_enc_skb with a cipher_type that can't be offloaded. Replace those
checks with a DEBUG_NET_WARN_ON_ONCE, and use cipher_desc instead of
hard-coding offloadable cipher types.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

I skipped this conversion in my previous series.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is just a trivial fix for a typo in a comment, no functional
changes.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The file name used in flash test was "dummy" because at the time test
was written, drivers were responsible for file request and as netdevsim
didn't do that, name was unused. However, the file load request is
now done in devlink code and therefore the file has to exist.
Use first random file from /lib/firmware for this purpose.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add software timestamp capabilities to the xen-netback driver
by advertising it on the struct ethtool_ops and calling
skb_tx_timestamp before passing the buffer to the queue.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

NUL-padding is not required as the buffer is already memset to 0:
|       memset(adapter->fw_version, 0, 32);

Note that another usage of strscpy exists on the same buffer:
|       strscpy((char *)adapter->fw_version, "N/A", sizeof(adapter->fw_version));

Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.

Also, while we're here, let's change memcpy() over to ethtool_sprintf()
for consistency.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use preferred device_get_match_data() instead of of_match_device() and
acpi_match_device() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.

This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use preferred spi_get_device_match_data() instead of of_match_device() and
spi_get_device_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, clock configuration is spread throughout the driver and
partially duplicated for the STM32MP1 and STM32 MCU variants. This makes
it difficult to keep track of which clocks need to be enabled or disabled
in various scenarios.

This patch adds symmetric stm32_dwmac_clk_enable/disable() functions
that handle all clock configuration, including quirks required while
suspending or resuming. syscfg_clk and clk_eth_ck are not present on
STM32 MCUs, but it is fine to try to configure them anyway since NULL
clocks are ignored.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Amit Cohen says:

====================
Extend VXLAN driver to support FDB flushing

The merge commit 92716869 ("Merge branch 'br-flush-filtering'") added
support for FDB flushing in bridge driver. Extend VXLAN driver to support
FDB flushing also. Add support for filtering by fields which are relevant
for VXLAN FDBs:
* Source VNI
* Nexthop ID
* 'router' flag
* Destination VNI
* Destination Port
* Destination IP

Without this set, flush for VXLAN device fails:
$ bridge fdb flush dev vx10
RTNETLINK answers: Operation not supported

With this set, such flush works with the relevant arguments, for example:
$ bridge fdb flush dev vx10 vni 5000 dst 193.2.2.1
< flush all vx10 entries with VNI 5000 and destination IP 193.2.2.1>

Some preparations are required, handle them before adding flushing support
in VXLAN driver. See more details in commit messages.

Patch set overview:
Patch #1 prepares flush policy to be used by VXLAN driver
Patches #2-#3 are preparations in VXLAN driver
Patch #4 adds an initial support for flushing in VXLAN driver
Patches #5-#9 add support for filtering by several attributes
Patch #10 adds a test for FDB flush with VXLAN
Patch #11 extends the test to check FDB flush with bridge
====================
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the test to check flushing with bridge device, test flush by device
and by VID.

Add test case for flushing with "self" and "master" and attributes that are
supported only in one driver, this is unrecommended configuration, check it
to verify that user gets an error.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination IP. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination IP is an attribute of
the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination IP', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.1 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 1000 self permanent

When user flush by destination IP x, only the relevant remotes will be
flushed:
$ bridge fdb flush dev vx10 dst 192.1.1.1

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination port. FDB entry
is stored as {MAC, SRC_VNI} + remote. The destination port is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination port', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent

When user flush by port x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 port 1111

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by destination VNI. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination VNI is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.

In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination VNI', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.

For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.2 vni 2000 self permanent

When user flush by VNI x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 vni 2000

$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by nexthop ID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for flush VXLAN FDB entries by source VNI.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The merge commit 92716869 ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver only, the VXLAN driver does
not support such flushing. Extend VXLAN driver to support FDB flushing.
In this commit, add support for flushing with state and flags, which are
the fields that supported in the bridge driver.

Note that bridge driver supports 'NTF_USE' flag, but there is no point to
support this flag for flushing as it is ignored when flags are stored.
'NTF_STICKY' is not relevant for VXLAN driver.

'NTF_ROUTER' is not supported in bridge driver for flush as it is not
relevant for bridge, add it for VXLAN.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the function vxlan_flush() does not flush the default FDB entry
(an entry with all_zeros_mac and default VNI), as it is deleted at
vxlan_uninit(). When this function will be used for flushing FDB entries
from user space, it will have to flush also the default entry in case that
other parameters match (e.g., VNI, flags).

Extend 'struct vxlan_fdb_flush_desc' to include an indication whether
the default entry should be flushed or not. The default value (false)
indicates to flush it, adjust all the existing callers to set
'.ignore_default_entry' to true, so the current behavior will not be
changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function vxlan_flush() gets a boolean called 'do_all' and in case
that it is false, it does not flush entries with state 'NUD_PERMANENT'
or 'NUD_NOARP'. The following patches will add support for FDB flush
with parameters from user space. Make the function more generic, so it
can be used later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The merge commit 92716869 ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver. The following patches
will extend VXLAN driver to support FDB flushing as well. The netlink
message for bulk delete is shared between the drivers. With the existing
implementation, there is no way to prevent user from flushing with
attributes that are not supported per driver. For example, when VNI will
be added, user will not get an error for flush FDB entries in bridge
with VNI, although this attribute is not relevant for bridge.

As preparation for support of FDB flush in VXLAN driver, move the policy
to be handled in bridge driver, later a new policy for VXLAN will be
added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(),
as this field is relevant only for bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

kernel/bpf/verifier.c
  82995598 ("bpf: Fix verifier log for async callback return values")
  a923819f ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>