- 21 Dec, 2011 9 commits
-
-
Luis R. Rodriguez authored
Please NACK nasty patches. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Marek Lindner authored
The IBSS merge code calls ieee80211_sta_expire() with a relatively short expire timeout that purges other clients prematurely. The expire function has to check that only the clients belonging to the vif in question are purged. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Yogesh Ashok Powar authored
When stack calls ampdu_action with action = IEEE80211_AMPDU_TX_STOP for a stream that has already been removed from the driver, call ieee80211_tx_ba_stop_irqsafe to clear the stream in the stack. Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
-
Luis R. Rodriguez authored
Joe changed ath_dbg() to simpify code but while his patch was being merged dfs.c was born and as such did not get the change Joe envisioned. This fixes that. Test compiled with: make allmodconfig Cc: Joe Perches <joe@perches.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: John W. Linville <linville@tuxdriver.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Johannes Berg authored
The ICT code erroneously uses PAGE_SIZE. The bug is that PAGE_SIZE isn't necessarily 4096, so on such platforms this code will not work correctly as we'll try to attempt to read an index in the table that the device never wrote, it always has 4096-byte pages. Additionally, the manual alignment code here is unnecessary -- Documentation/DMA-API-HOWTO.txt states: The cpu return address and the DMA bus master address are both guaranteed to be aligned to the smallest PAGE_SIZE order which is greater than or equal to the requested size. This invariant exists (for example) to guarantee that if you allocate a chunk which is smaller than or equal to 64 kilobytes, the extent of the buffer you receive will not cross a 64K boundary. Just use appropriate new constants and get rid of the alignment code. Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Alan Cox authored
Just another USB identifier. Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Andres Salomon authored
The libertas scan thread expects priv->scan_req to be non-NULL. In theory, it should always be set. In practice, we've seen the following oops: [ 8363.067444] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 8363.067490] pgd = c0004000 [ 8363.078393] [00000004] *pgd=00000000 [ 8363.086711] Internal error: Oops: 17 [#1] PREEMPT [ 8363.091375] Modules linked in: fuse libertas_sdio libertas psmouse mousedev ov7670 mmp_camera joydev videobuf2_core videobuf2_dma_sg videobuf2_memops [last unloaded: scsi_wait_scan] [ 8363.107490] CPU: 0 Not tainted (3.0.0-gf7ccc69 #671) [ 8363.112799] PC is at lbs_scan_worker+0x108/0x5a4 [libertas] [ 8363.118326] LR is at 0x0 [ 8363.120836] pc : [<bf03a854>] lr : [<00000000>] psr: 60000113 [ 8363.120845] sp : ee66bf48 ip : 00000000 fp : 00000000 [ 8363.120845] r10: ee2c2088 r9 : c04e2efc r8 : eef97005 [ 8363.132231] r7 : eee0716f r6 : ee2c02c0 r5 : ee2c2088 r4 : eee07160 [ 8363.137419] r3 : 00000000 r2 : a0000113 r1 : 00000001 r0 : eee07160 [ 8363.143896] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8363.157630] Control: 10c5387d Table: 2e754019 DAC: 00000015 [ 8363.163334] Process kworker/u:1 (pid: 25, stack limit = 0xee66a2f8) While I've not found a smoking gun, there are two places that raised red flags for me. The first is in _internal_start_scan, when we queue up a scan; we first queue the worker, and then set priv->scan_req. There's theoretically a 50mS delay which should be plenty, but doing things that way just seems racy (and not in the good way). The second is in the scan worker thread itself. Depending on the state of priv->scan_channel, we cancel pending scan runs and then requeue a run in 300mS. We then send the scan command down to the hardware, sleep, and if we get scan results for all the desired channels, we set priv->scan_req to NULL. However, it that's happened in less than 300mS, what happens with the pending scan run? This patch addresses both of those concerns. With the patch applied, we have not seen the oops in the past two weeks. Signed-off-by:
Andres Salomon <dilinger@queued.net> Cc: stable@kernel.org Signed-off-by:
-
Luis R. Rodriguez authored
DFS_DEBUG_H is very generic, instead use something more specific to ath9k such as ATH9K_DFS_DEBUG_H. Reported-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
-
-
- 20 Dec, 2011 10 commits
-
-
Eyal Shapira authored
stop sched scan isn't an immediate operation and we need to wait for PERIODIC_SCAN_COMPLETE_EVENT_ID after sending a stop before changing internal state and notifying upper layers. Not doing this caused problems when canceling an existing sched scan and immediately requesting to start a new one with a different configuration as the FW was still in the middle of the previous sched scan. Signed-off-by:
Eyal Shapira <eyal@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com>
-
Eyal Shapira authored
DFS channels weren't scanned properly because min/max_duration weren't set for these channels even though they're required by the FW. The change sets passive_duration and min/max_duration for all channels as the FW uses the correct parameters according to the channel type. Signed-off-by:
-
Luciano Coelho authored
The wl12xx_platform_data.c file did not have a proper copyright notice. Signed-off-by: -
Eliad Peller authored
The current wl1271_dev_notify implementation sets the new operstate to all associated stations (while only a specific vif was changed). Until we'll have a method to get the actual vif from the given dev, check the current operstate of each vif. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Eliad Peller authored
When removing a sta/ibss role, the device role has to stopped (and disabled) as well. Signed-off-by:
-
Eliad Peller authored
dev_role_id only indicates whether the dev role is enabled, not started (e.g. on IBSS merge, the device role is enabled, but not started). Checking for any role in ROC (in order to determine whether dev role was started) is wrong as well, especially in multi-vif env. Check for started dev role only by checking the dev_hlid. Signed-off-by:
-
Eliad Peller authored
During sta disconnection, a deauth packet is being queued to the dev role queue. However, the dev role is being stopped before the packet was sent. Flush the tx queue before stopping the dev role. Signed-off-by:
-
Eliad Peller authored
This flag should be set per-vif, rather than globally. Rename the flag to indicate IN_USE (rather than IDLE), as in the default configuration (i.e. flag is clear) the vif should be idle. Change all the bit operations (and elp conditions) appropriately. Signed-off-by:
-
Eliad Peller authored
Since the conf_tx callback passes the vif as param, we must have been added first (and mac80211 verifies it). Remove the handling of such case. Signed-off-by:
-
Eliad Peller authored
Implement the change_interface callback by simply removing the current vif and adding a new one after updating the vif type. Signed-off-by:
-
- 19 Dec, 2011 21 commits
-
-
Venkataraman, Meenakshi authored
Runtime DC calibration was previously conditional. Remove this behaviour, as new devices support runtime DC calibration, while older devices ignore the runtime DC calibration request. This patch addresses low TX throughput issues seen with the 6205. Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
instead of doing all the work in IWL_TM_CMD_APP2DEV_GET_DEVICE_ID, just use the information from bus_get_hw_id() Signed-off-by: -
Wey-Yi Guy authored
Set the hw_version in wiphy structure Signed-off-by: -
Wey-Yi Guy authored
Add function to get hw version in both strind and u32 format Signed-off-by: -
Johannes Berg authored
At least while debugging, a lot of people use 11n_disable=1 to disable HT completely. To be able to figure out what parts of HT cause the problems we see, make the parameter a bitmap, allowing to disable all of HT and aggregation (TX/RX) separately. Signed-off-by:
-
Johannes Berg authored
The legacy IRQs could be read from a trace by their IO accesses, but reading the ICT doesn't leave any trace (pun intended ;-) ) so in order to see what input they get we need to add specific tracepoints. While at it, fix whitespace in two related places. Signed-off-by:
-
Yogesh Ashok Powar authored
The commit 42624d49 created following sparse warning >net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces) >net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx >net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident> Making use of rcu_dereference_protected to fix the problem. V2: - Replacing rcu_dereference with rcu_dereference_protected as suggested by Johannes. - Adding mutex_lock/unlock to satisfy the condition at rcu_dereference_protected Cc: Nishant Sarmukadam <nishants@marvell.com> Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Felix Fietkau authored
The commit "ath9k: simplify tx locking" introduced a soft lockup triggered by mac80211 sending a BAR frame triggered by a driver call to ieee80211_tx_send_bar or ieee80211_tx_status. Fix these issues by queueing processed tx status skbs and submitting them to mac80211 outside of the lock. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Larry Finger authored
When I tested commit 6539306b, I did not notice that loading an out-of-tree module turns off lockdep testing in kernel 3.2. For that reason, I missed the kernel WARNING shown below: The solution fixes the warning by partially reverting commit 6539306b. [ 84.168146] ------------[ cut here ]------------ [ 84.168155] WARNING: at kernel/mutex.c:198 mutex_lock_nested+0x309/0x310() [ 84.168158] Hardware name: HP Pavilion dv2700 Notebook PC [ 84.168161] Modules linked in: nfs lockd auth_rpcgss nfs_acl sunrpc af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 mperf e xt3 jbd ide_cd_mod cdrom snd_hda_codec_conexant arc4 rtl8192ce ide_pci_generic rtl8192c_common rtlwifi snd_hda_intel mac80211 snd_hda_codec snd_pcm snd_timer amd74xx ide_core cfg80211 k8temp snd joydev soundcore hwmon battery forcedeth i2c_nforce2 sg rfkill ac serio_raw snd_page_alloc button video i2c_core ipv6 a utofs4 ext4 mbcache jbd2 crc16 sd_mod ahci ohci_hcd libahci libata scsi_mod ehci_hcd usbcore usb_common fan processor thermal [ 84.168231] Pid: 1218, comm: kworker/u:2 Not tainted 3.2.0-rc5-wl+ #155 [ 84.168234] Call Trace: [ 84.168240] [<ffffffff81048aaa>] warn_slowpath_common+0x7a/0xb0 [ 84.168245] [<ffffffff81048af5>] warn_slowpath_null+0x15/0x20 [ 84.168249] [<ffffffff813811f9>] mutex_lock_nested+0x309/0x310 [ 84.168269] [<ffffffffa00793f9>] ? rtl_ips_nic_on+0x49/0xb0 [rtlwifi] [ 84.168277] [<ffffffffa00793f9>] rtl_ips_nic_on+0x49/0xb0 [rtlwifi] [ 84.168284] [<ffffffffa007ab85>] rtl_pci_tx+0x1b5/0x560 [rtlwifi] [ 84.168291] [<ffffffffa007635a>] rtl_op_tx+0x9a/0xa0 [rtlwifi] [ 84.168359] [<ffffffffa043cf51>] __ieee80211_tx+0x181/0x2b0 [mac80211] [ 84.168375] [<ffffffffa043ef06>] ieee80211_tx+0xf6/0x120 [mac80211] [ 84.168391] [<ffffffffa043ee49>] ? ieee80211_tx+0x39/0x120 [mac80211] [ 84.168408] [<ffffffffa043f80b>] ieee80211_xmit+0xdb/0x100 [mac80211] [ 84.168425] [<ffffffffa043f730>] ? ieee80211_skb_resize.isra.26+0xb0/0xb0 [mac80211] [ 84.168441] [<ffffffffa0440b2a>] ieee80211_tx_skb_tid+0x5a/0x70 [mac80211] [ 84.168458] [<ffffffffa0443da2>] ieee80211_send_auth+0x152/0x1b0 [mac80211] [ 84.168474] [<ffffffffa042e169>] ieee80211_work_work+0x1049/0x1860 [mac80211] [ 84.168489] [<ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211] [ 84.168504] [<ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211] [ 84.168510] [<ffffffff81065ffc>] process_one_work+0x17c/0x530 [ 84.168514] [<ffffffff81065f92>] ? process_one_work+0x112/0x530 [ 84.168519] [<ffffffff81066994>] worker_thread+0x164/0x350 [ 84.168524] [<ffffffff8108420d>] ? trace_hardirqs_on+0xd/0x10 [ 84.168528] [<ffffffff81066830>] ? manage_workers.isra.28+0x220/0x220 [ 84.168533] [<ffffffff8106bc17>] kthread+0x87/0x90 [ 84.168539] [<ffffffff813854b4>] kernel_thread_helper+0x4/0x10 [ 84.168543] [<ffffffff81382bdd>] ? retint_restore_args+0xe/0xe [ 84.168547] [<ffffffff8106bb90>] ? __init_kthread_worker+0x70/0x70 [ 84.168552] [<ffffffff813854b0>] ? gs_change+0xb/0xb [ 84.168554] ---[ end trace f25a4fdc768c028f ]--- Signed-off-by:
-
Franky Lin authored
This patch adds a Kconfig option for SDIO bus support and abstracts a build subset correspondingly. It's the final patch of fullmac bus interface refactoring. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
This patch removes some headers files include lines from sdio layer code. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
The idle macros are only used by dhd_sdio.c. It's more appropriate to place them in dhd_sdio.c instead of dhd.h. Reviewed-by:
-
