- 05 Aug, 2019 12 commits
-
-
David Ahern authored
The nexthop path in rt6_update_exception_stamp_rt needs to call rcu_read_unlock if it fails to find a fib6_nh match rather than just returning. Fixes: e659ba31 ("ipv6: Handle all fib6_nh in a nexthop in exception handling") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Make sure that shutdown never works, and at the same time document how I tested to came to the conclusion that currently reuse is not possible. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Looks like we were slightly overzealous with the shutdown() cleanup. Even though the sock->sk_state can reach CLOSED again, socket->state will not got back to SS_UNCONNECTED once connections is ESTABLISHED. Meaning we will see EISCONN if we try to reconnect, and EINVAL if we try to listen. Only listen sockets can be shutdown() and reused, but since ESTABLISHED sockets can never be re-connected() or used for listen() we don't need to try to clean up the ULP state early. Fixes: 32857cf5 ("net/tls: fix transition through disconnect with close") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== net: fix regressions for generic-XDP Thanks to Brandon Cazander, who wrote a very detailed bug report that even used perf probe's on xdp-newbies mailing list, we discovered that generic-XDP contains some regressions when using bpf_xdp_adjust_head(). First issue were that my selftests script, that use bpf_xdp_adjust_head(), by mistake didn't use generic-XDP any-longer. That selftest should have caught the real regression introduced in commit 458bf2f2 ("net: core: support XDP generic on stacked devices."). To verify this patchset fix the regressions, you can invoked manually via: cd tools/testing/selftests/bpf/ sudo ./test_xdp_vlan_mode_generic.sh sudo ./test_xdp_vlan_mode_native.sh ==================== Link: https://www.spinics.net/lists/xdp-newbies/msg01231.html Fixes: 458bf2f2 ("net: core: support XDP generic on stacked devices.") Reported by: Brandon Cazander <brandon.cazander@multapplied.net> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
When generic-XDP was moved to a later processing step by commit 458bf2f2 ("net: core: support XDP generic on stacked devices.") a regression was introduced when using bpf_xdp_adjust_head. The issue is that after this commit the skb->network_header is now changed prior to calling generic XDP and not after. Thus, if the header is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header also need to be updated again. Fix by calling skb_reset_network_header(). Fixes: 458bf2f2 ("net: core: support XDP generic on stacked devices.") Reported-by: Brandon Cazander <brandon.cazander@multapplied.net> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Given the increasing number of BPF selftests, it makes sense to reduce the time to execute these tests. The ping parameters are adjusted to reduce the time from measures 9 sec to approx 2.8 sec. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric) create two wrapper test scripts, that start the test_xdp_vlan.sh script with these modes. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP. This selftest was created together with a fix for generic XDP, in commit 29724956 ("net: fix generic XDP to handle if eth header was mangled"). And was suppose to catch if generic XDP was broken again. The tests are using veth and assumed that veth driver didn't support native driver XDP, thus it used the (ip link set) 'xdp' attach that fell back to generic-XDP. But veth gained native-XDP support in 948d4f21 ("veth: Add driver XDP"), which caused this test script to use native-XDP. Fixes: 948d4f21 ("veth: Add driver XDP") Fixes: 97396ff0 ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Qian Cai authored
The commit 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") introduced an undefined behaviour below due to "frag->last_in_page" is only initialized in mlx5e_init_frags_partition() when, if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE) or after bailed out the loop, for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) As the result, there could be some "frag" have uninitialized value of "last_in_page". Later, get_frag() obtains those "frag" and check "frag->last_in_page" in mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always initializing "frag->last_in_page" to "false" in mlx5e_init_frags_partition(). UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12 load of value 170 is not a valid value for type 'bool' (aka '_Bool') Call trace: dump_backtrace+0x0/0x264 show_stack+0x20/0x2c dump_stack+0xb0/0x104 __ubsan_handle_load_invalid_value+0x104/0x128 mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core] mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core] mlx5e_napi_poll+0x17c/0xa30 [mlx5_core] net_rx_action+0x248/0x940 __do_softirq+0x350/0x7b8 irq_exit+0x200/0x26c __handle_domain_irq+0xc8/0x128 gic_handle_irq+0x138/0x228 el1_irq+0xb8/0x140 arch_cpu_idle+0x1a4/0x348 do_idle+0x114/0x1b0 cpu_startup_entry+0x24/0x28 rest_init+0x1ac/0x1dc arch_call_rest_init+0x10/0x18 start_kernel+0x4d4/0x57c Fixes: 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmytro Linkin authored
Currently init call of all actions (except ipt) init their 'parm' structure as a direct pointer to nla data in skb. This leads to race condition when some of the filter actions were initialized successfully (and were assigned with idr action index that was written directly into nla data), but then were deleted and retried (due to following action module missing or classifier-initiated retry), in which case action init code tries to insert action to idr with index that was assigned on previous iteration. During retry the index can be reused by another action that was inserted concurrently, which causes unintended action sharing between filters. To fix described race condition, save action idr index to temporary stack-allocated variable instead on nla data. Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hubert Feurstein authored
We have to drop the adjust_link callback in order to finally migrate to phylink. Otherwise we get the following warning during startup: "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!" The warning is generated in the function dsa_port_link_register_of in dsa/port.c: int dsa_port_link_register_of(struct dsa_port *dp) { struct dsa_switch *ds = dp->ds; if (!ds->ops->adjust_link) return dsa_port_phylink_register(dp); dev_warn(ds->dev, "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n"); [...] } Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johan Hovold authored
Fix two reset-gpio sanity checks which were never converted to use gpio_is_valid(), and make sure to use -EINVAL to indicate a missing reset line also for the UART-driver module parameter and for the USB driver. This specifically prevents the UART and USB drivers from incidentally trying to request and use gpio 0, and also avoids triggering a WARN() in gpio_to_desc() during probe when no valid reset line has been specified. Fixes: e33a3f84 ("NFC: nfcmrvl: allow gpio 0 for reset signalling") Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org>
-
- 03 Aug, 2019 7 commits
-
-
Qian Cai authored
There are a lot of those warnings with GCC8+ 64-bit, In file included from ./include/linux/sctp.h:42, from net/core/skbuff.c:47: ./include/uapi/linux/sctp.h:395:1: warning: alignment 4 of 'struct sctp_paddr_change' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:728:1: warning: alignment 4 of 'struct sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:727:26: warning: 'sspp_addr' offset 4 in 'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage sspp_addr; ^~~~~~~~~ ./include/uapi/linux/sctp.h:741:1: warning: alignment 4 of 'struct sctp_prim' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:740:26: warning: 'ssp_addr' offset 4 in 'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage ssp_addr; ^~~~~~~~ ./include/uapi/linux/sctp.h:792:1: warning: alignment 4 of 'struct sctp_paddrparams' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:784:26: warning: 'spp_address' offset 4 in 'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage spp_address; ^~~~~~~~~~~ ./include/uapi/linux/sctp.h:905:1: warning: alignment 4 of 'struct sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:899:26: warning: 'spinfo_address' offset 4 in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage spinfo_address; ^~~~~~~~~~~~~~ This is because the commit 20c9c825 ("[SCTP] Fix SCTP socket options to work with 32-bit apps on 64-bit kernels.") added "packed, aligned(4)" GCC attributes to some structures but one of the members, i.e, "struct sockaddr_storage" in those structures has the attribute, "aligned(__alignof__ (struct sockaddr *)" which is 8-byte on 64-bit systems, so the commit overwrites the designed alignments for "sockaddr_storage". To fix this, "struct sockaddr_storage" needs to be aligned to 4-byte as it is only used in those packed sctp structure which is part of UAPI, and "struct __kernel_sockaddr_storage" is used in some other places of UAPI that need not to change alignments in order to not breaking userspace. Use an implicit alignment for "struct __kernel_sockaddr_storage" so it can keep the same alignments as a member in both packed and un-packed structures without breaking UAPI. Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kevin Lo authored
It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set, we should select PHYLIB, otherwise building still fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c:(.text+0x2744): undefined reference to `phy_start' enetc.c:(.text+0x282c): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c:(.text+0x28f8): undefined reference to `phy_stop' enetc.c:(.text+0x2904): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wang Xiayang authored
strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dexuan Cui authored
There is a race condition for an established connection that is being closed by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the 'remove_sock' is false): 1 for the initial value; 1 for the sk being in the bound list; 1 for the sk being in the connected list; 1 for the delayed close_work. After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may* decrease the refcnt to 3. Concurrently, hvs_close_connection() runs in another thread: calls vsock_remove_sock() to decrease the refcnt by 2; call sock_put() to decrease the refcnt to 0, and free the sk; next, the "release_sock(sk)" may hang due to use-after-free. In the above, after hvs_release() finishes, if hvs_close_connection() runs faster than "__vsock_release() -> sock_put(sk)", then there is not any issue, because at the beginning of hvs_close_connection(), the refcnt is still 4. The issue can be resolved if an extra reference is taken when the connection is established. Fixes: a9eeb998 ("hv_sock: Add support for delayed close") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Aug, 2019 12 commits
-
-
Denis Kirjanov authored
get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taras Kondratiuk authored
Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by: Taras Kondratiuk <takondra@cisco.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Geert Uytterhoeven says: ==================== net: Manufacturer names and spelling fixes This is a set of fixes for (some blatantly) wrong manufacturer names and various spelling issues, mostly in Kconfig help texts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Use "Packet Engines" consistently. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to AMD instead of Broadcom, presumably because it was copied from the former. Fixes: adfc5217 ("broadcom: Move the Broadcom drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to IBM instead of Apple, presumably because it was copied from the former. Fixes: 8fb6b090 ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The help text refers to Western Digital instead of National Semiconductor 8390, presumably because it was copied from the former. Fixes: 644570b8 ("8390: Move the 8390 related drivers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jul, 2019 9 commits
-
-
Frode Isaksen authored
This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia-Ju Bai authored
net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: cf32526c ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb3 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Juliana Rodrigueiro authored
Since linux 4.9 it is not possible to use buffers on the stack for DMA transfers. During usb probe the driver crashes with "transfer buffer is on stack" message. This fix k-allocates a buffer to be used on "read_reg_atomic", which is a macro that calls "usb_control_msg" under the hood. Kernel 4.19 backtrace: usb_hcd_submit_urb+0x3e5/0x900 ? sched_clock+0x9/0x10 ? log_store+0x203/0x270 ? get_random_u32+0x6f/0x90 ? cache_alloc_refill+0x784/0x8a0 usb_submit_urb+0x3b4/0x550 usb_start_wait_urb+0x4e/0xd0 usb_control_msg+0xb8/0x120 hfcsusb_probe+0x6bc/0xb40 [hfcsusb] usb_probe_interface+0xc2/0x260 really_probe+0x176/0x280 driver_probe_device+0x49/0x130 __driver_attach+0xa9/0xb0 ? driver_probe_device+0x130/0x130 bus_for_each_dev+0x5a/0x90 driver_attach+0x14/0x20 ? driver_probe_device+0x130/0x130 bus_add_driver+0x157/0x1e0 driver_register+0x51/0xe0 usb_register_driver+0x5d/0x120 ? 0xf81ed000 hfcsusb_drv_init+0x17/0x1000 [hfcsusb] do_one_initcall+0x44/0x190 ? free_unref_page_commit+0x6a/0xd0 do_init_module+0x46/0x1c0 load_module+0x1dc1/0x2400 sys_init_module+0xed/0x120 do_fast_syscall_32+0x7a/0x200 entry_SYSENTER_32+0x6b/0xbe Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is no need for individual driver config symbols to duplicate this dependency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * revert NETIF_F_LLTX usage as it caused problems * avoid warning on WMM parameters from AP that are too short * fix possible null-ptr dereference in hwsim * fix interface combinations with 4-addr and crypto control ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) memleak in ebtables from the error path for the 32/64 compat layer, from Florian Westphal. 2) Fix inverted meta ifname/ifidx matching when no interface is set on either from the input/output path, from Phil Sutter. 3) Remove goto label in nft_meta_bridge, also from Phil. 4) Missing include guard in xt_connlabel, from Masahiro Yamada. 5) Two patch to fix ipset destination MAC matching coming from Stephano Brivio, via Jozsef Kadlecsik. 6) Fix set rename and listing concurrency problem, from Shijie Luo. Patch also coming via Jozsef Kadlecsik. 7) ebtables 32/64 compat missing base chain policy in rule count, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-