- 17 May, 2017 36 commits
-
-
Eric Dumazet authored
Use our own macro instead of abusing tcp_time_stamp Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We abuse tcp_time_stamp for two different cases : 1) base to generate TCP Timestamp options (RFC 7323) 2) A 32bit version of jiffies since some TCP fields are 32bit wide to save memory. Since we want in the future to have 1ms TCP TS clock, regardless of HZ value, we want to cleanup things. tcp_jiffies32 is the truncated jiffies value, which will be used only in places where we want a 'host' timestamp. Signed-off-by:
-
Eric Dumazet authored
Idea is to later convert tp->tcp_mstamp to a full u64 counter using usec resolution, so that we can later have fine grained TCP TS clock (RFC 7323), regardless of HZ value. We try to refresh tp->tcp_mstamp only when necessary. Signed-off-by:
-
David S. Miller authored
We still need to initialize err to -EINVAL for the case where 'opt' is NULL in dsmark_init(). Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== net: sched: introduce multichain support for filters Currently, each classful qdisc holds one chain of filters. This chain is traversed and each filter could be matched on, which may lead to execution of list of actions. One of such action could be "reclassify", which would "reset" the processing of the filter chain. So this filter chain could be looked at as a flat table. Sometimes it is convenient for user to configure a hierarchy of tables. Example usecase is encapsulation. Hierarchy of tables is a common way how it is done in HW pipelines. So it is much more convenient to offload this. This patchset contains two major patches: 8/10 - This patch introduces the support for having multiple chains of filters. 10/10 - This patch adds new control action to allow going to specified chain The rest of the patches are smaller or bigger depencies of those 2. Please see individual patch descriptions for details. Corresponding iproute2 patches are appended as a reply to this cover letter. Simple example: $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 parent ffff: protocol ip pref 33 flower dst_mac 52:54:00:3d:c7:6d action goto chain 11 $ tc filter add dev eth0 parent ffff: protocol ip pref 22 chain 11 flower dst_ip 192.168.40.1 action drop $ tc filter show dev eth0 root filter parent ffff: protocol ip pref 33 flower chain 0 filter parent ffff: protocol ip pref 33 flower chain 0 handle 0x1 dst_mac 52:54:00:3d:c7:6d eth_type ipv4 action order 1: gact action goto chain 11 random type none pass val 0 index 2 ref 1 bind 1 filter parent ffff: protocol ip pref 22 flower chain 11 filter parent ffff: protocol ip pref 22 flower chain 11 handle 0x1 eth_type ipv4 dst_ip 192.168.40.1 action order 1: gact action drop random type none pass val 0 index 3 ref 1 bind 1 ==================== Signed-off-by: -
Jiri Pirko authored
Introduce new type of termination action called "goto_chain". This allows user to specify a chain to be processed. This action type is then processed as a return value in tcf_classify loop in similar way as "reclassify" is, only it does not reset to the first filter in chain but rather reset to the first filter of the desired chain. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jiri Pirko authored
Tp pointer will be needed by the next patch in order to get the chain. Signed-off-by:
-
Jiri Pirko authored
Instead of having only one filter per block, introduce a list of chains for every block. Create chain 0 by default. UAPI is extended so the user can specify which chain he wants to change. If the new attribute is not specified, chain 0 is used. That allows to maintain backward compatibility. If chain does not exist and user wants to manipulate with it, new chain is created with specified index. Also, when last filter is removed from the chain, the chain is destroyed. Signed-off-by:
-
Jiri Pirko authored
Since there will be multiple chains to dump, push chain dumping code to a separate function. Signed-off-by:
-
Jiri Pirko authored
Introduce struct tcf_chain object and set of helpers around it. Wraps up insertion, deletion and search in the filter chain. Signed-off-by:
-
Jiri Pirko authored
Call the helper from the function rather than to always adjust the return value of the function. Signed-off-by:
-
Jiri Pirko authored
The use of "nprio" variable in tc_ctl_tfilter is a bit cryptic and makes a reader wonder what is going on for a while. So help him to understand this priority allocation dance a litte bit better. Signed-off-by:
-
Jiri Pirko authored
Make the name consistent with the rest of the helpers around. Signed-off-by:
-
Jiri Pirko authored
Currently, the filter chains are direcly put into the private structures of qdiscs. In order to be able to have multiple chains per qdisc and to allow filter chains sharing among qdiscs, there is a need for common object that would hold the chains. This introduces such object and calls it "tcf_block". Helpers to get and put the blocks are provided to be called from individual qdisc code. Also, the original filter_list pointers are left in qdisc privs to allow the entry into tcf_block processing without any added overhead of possible multiple pointer dereference on fast path. Signed-off-by:
-
Jiri Pirko authored
Move tc_classify function to cls_api.c where it belongs, rename it to fit the namespace. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== net: dsa: Sort various lists As we gain more DSA drivers and tagging protocols, the lists are getting a bit unruly. Do some sorting. ==================== Signed-off-by: -
Andrew Lunn authored
With more drivers being added, it is time to sort the drivers to impose some order. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
With more tag protocols being added, regain some order by sorting the entries in various places. Signed-off-by:
-
Felix Manlunas authored
In the function assigned to .ndo_set_vf_mac, check the validity of the vfidx argument before proceeding to tell the firmware to set the VF MAC address. Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
-
Rick Farrington authored
When multiple liquidio NICs are plugged in, the first insmod of the PF driver succeeds. But after an rmmod, a subsequent insmod fails. Reason is during rmmod, the PF driver resets the Octeon of only one of the NICs; it neglects to reset the Octeons of the other NICs. Fix the insmod failure by adding the missing Octeon resets at rmmod. Keep a per-NIC refcount that indicates the number of active PFs in a given NIC. When the refcount goes to zero, then reset the Octeon of that NIC. Signed-off-by:
Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by:
-
Vivien Didelot authored
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Preparations for restructuring This patchset doesn't introduce any functional changes and merely meant to make the code base more receptive for upcoming restructuring. The first six patches mainly shuffle code in order to reduce the scope of structs that shouldn't be defined in the main driver header. Most of them will be later expanded, so it makes sense to correctly place them now. The last patches mostly simplify bridge-related functions, so that they could be more easily modified later on. ==================== Signed-off-by: -
Ido Schimmel authored
In virtual mode, packets are classified to FIDs based on their ingress port and VLAN whereas in non-virtual mode only the VLAN is taken into account. Currently ports are initialized to use virtual mode due to the presence of the PVID vPort. However, we're going to transition ports between both modes based on the FIDs they use and not merely based on the presence on a VLAN upper. Therefore, during initialization, no mode will be explicitly set. Since the Programmer's Reference Manual (PRM) doesn't specify a default, explicitly set the port to non-virtual mode and later transition the port between both modes based on the FIDs it uses. In a follow-up patchset, this step will be moved to the common FID core where it logically belongs. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
PVID is a port attribute and should therefore reside in the main driver file and not the switchdev specific one. Signed-off-by:
-
Ido Schimmel authored
We no longer batch VLAN operations, so there's no need to set the learning state for a range of VLANs. Use a common function to set the learning state for a Port-VLAN, thereby making the code saner more receptive for upcoming changes. Signed-off-by:
-
Ido Schimmel authored
Simplify the code by using the common function that sets an STP state for a Port-VLAN and remove the existing one that tries to batch it for several VLANs. This will help us in a follow-up patchset to introduce a unified infrastructure for bridge ports, regardless if the bridge is VLAN-aware or not. Signed-off-by:
-
Ido Schimmel authored
switchdev's VLAN object has the ability to describe a range of VLAN IDs, but this is only used when VLAN operations are done using the SELF flag, which is something we would like to remove as it allows one to bypass the bridge driver. Do VLAN operations on a per-VLAN basis, thereby simplifying the code and preparing it for refactoring in a follow-up patchset. Signed-off-by:
-
Ido Schimmel authored
Since commit 97c24290 ("switchdev: Execute bridge ndos only for bridge ports") switchdev code checks that port is bridged, so no need to perform the same check in the driver. Signed-off-by:
-
Ido Schimmel authored
The router interfaces (RIFs) array is currently initialized together with the general router configuration. However, in a follow-up patchset we're going to introduce a common RIF core that will require us to initialize more RIF constructs, so move the RIF initialization to its own function. Signed-off-by:
-
Ido Schimmel authored
The FIB notification block logically belongs inside the router specific struct, so move it there. Signed-off-by:
-
Ido Schimmel authored
The router interfaces (RIFs) array is of no interest to code outside the routing realm, so declare it inside the router specific struct instead of the chip-wide one. Signed-off-by:
-
Ido Schimmel authored
Some attributes in the global chip struct are only relevant for bridge operation, so encapsulate them in their own struct that isn't exposed to non-bridge code. This will also help us later, when we add more bridge-specific attributes. Signed-off-by:
-
Ido Schimmel authored
In a similar fashion to previous patch, the router structure ('mlxsw_sp_router') doesn't need to be accessible to anyone, but the router code located at spectrum_router.c Make this apparent and reduce its scope by defining it there. Signed-off-by: -
Ido Schimmel authored
The shared buffer structure ('mlxsw_sp_sb') doesn't need to be accessible to anyone, but the shared buffer code located at spectrum_buffers.c Make this apparent and reduce its scope by defining it there. Signed-off-by: -
Ganesh Goudar authored
Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
When is_kdump_kernel() is true, reduce memory footprint of cxgb4 by using a single "Queue Set". Signed-off-by:
-
- 16 May, 2017 4 commits
-
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
Andrew Lunn authored
commit fa8cddaf ("net phylib: Remove unnecessary condition check in phy") removed the only place where the PHY flag PHY_HAS_MAGICANEG was checked. But it left the flag being set in the drivers. Remove the flag. Signed-off-by:
-
Leon Romanovsky authored
There is inline function to test if carrier present, so it makes open-coded solution redundant. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Eric Dumazet authored
BBR congestion control depends on pacing, and pacing is currently handled by sch_fq packet scheduler for performance reasons, and also because implemening pacing with FQ was convenient to truly avoid bursts. However there are many cases where this packet scheduler constraint is not practical. - Many linux hosts are not focusing on handling thousands of TCP flows in the most efficient way. - Some routers use fq_codel or other AQM, but still would like to use BBR for the few TCP flows they initiate/terminate. This patch implements an automatic fallback to internal pacing. Pacing is requested either by BBR or use of SO_MAX_PACING_RATE option. If sch_fq happens to be in the egress path, pacing is delegated to the qdisc, otherwise pacing is done by TCP itself. One advantage of pacing from TCP stack is to get more precise rtt estimations, and less work done from TX completion, since TCP Small queue limits are not generally hit. Setups with single TX queue but many cpus might even benefit from this. Note that unlike sch_fq, we do not take into account header sizes. Taking care of these headers would add additional complexity for no practical differences in behavior. Some performance numbers using 800 TCP_STREAM flows rate limited to ~48 Mbit per second on 40Gbit NIC. If MQ+pfifo_fast is used on the NIC : $ sar -n DEV 1 5 | grep eth 14:48:44 eth0 725743.00 2932134.00 46776.76 4335184.68 0.00 0.00 1.00 14:48:45 eth0 725349.00 2932112.00 46751.86 4335158.90 0.00 0.00 0.00 14:48:46 eth0 725101.00 2931153.00 46735.07 4333748.63 0.00 0.00 0.00 14:48:47 eth0 725099.00 2931161.00 46735.11 4333760.44 0.00 0.00 1.00 14:48:48 eth0 725160.00 2931731.00 46738.88 4334606.07 0.00 0.00 0.00 Average: eth0 725290.40 2931658.20 46747.54 4334491.74 0.00 0.00 0.40 $ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 4 0 0 259825920 45644 2708324 0 0 21 2 247 98 0 0 100 0 0 4 0 0 259823744 45644 2708356 0 0 0 0 2400825 159843 0 19 81 0 0 0 0 0 259824208 45644 2708072 0 0 0 0 2407351 159929 0 19 81 0 0 1 0 0 259824592 45644 2708128 0 0 0 0 2405183 160386 0 19 80 0 0 1 0 0 259824272 45644 2707868 0 0 0 32 2396361 158037 0 19 81 0 0 Now use MQ+FQ : lpaa23:~# echo fq >/proc/sys/net/core/default_qdisc lpaa23:~# tc qdisc replace dev eth0 root mq $ sar -n DEV 1 5 | grep eth 14:49:57 eth0 678614.00 2727930.00 43739.13 4033279.14 0.00 0.00 0.00 14:49:58 eth0 677620.00 2723971.00 43674.69 4027429.62 0.00 0.00 1.00 14:49:59 eth0 676396.00 2719050.00 43596.83 4020125.02 0.00 0.00 0.00 14:50:00 eth0 675197.00 2714173.00 43518.62 4012938.90 0.00 0.00 1.00 14:50:01 eth0 676388.00 2719063.00 43595.47 4020171.64 0.00 0.00 0.00 Average: eth0 676843.00 2720837.40 43624.95 4022788.86 0.00 0.00 0.40 $ vmstat 1 5 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 259832240 46008 2710912 0 0 21 2 223 192 0 1 99 0 0 1 0 0 259832896 46008 2710744 0 0 0 0 1702206 198078 0 17 82 0 0 0 0 0 259830272 46008 2710596 0 0 0 0 1696340 197756 1 17 83 0 0 4 0 0 259829168 46024 2710584 0 0 16 0 1688472 197158 1 17 82 0 0 3 0 0 259830224 46024 2710408 0 0 0 0 1692450 197212 0 18 82 0 0 As expected, number of interrupts per second is very different. Signed-off-by:
-
