This patch updates the recently submitted
"Associate the HDMI clock together with LCDC1 on sh7372"
to V2 with the following change:
 - Use lcdc1_device on AP4EVB to build properly.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Commit c03f007a (OMAP: PM:
omap_device: add system PM methods for PM domain handling) mistakenly
used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
for the PM domains noirq methods.  Fix that by setting only the
suspend_noirq and resume_noirq methods with custom versions.

Note that all other PM domain methods (including the "normal"
suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
which configures them all to the default subsystem (platform_bus)
methods.
Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The description of pm_runtime_irq_safe() has to be updated to follow
the code after commit 02b26774 (PM / Runtime: Allow _put_sync() from
interrupts-disabled context).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Kevin Hilman <khilman@ti.com>

Associate the HDMI clock together with LCDC1 on sh7372.

Without this patch Suspend-to-RAM hangs on the boards
AP4EVB and Mackerel. The code hangs in the LCDC driver
where the software is waiting forever for the hardware to
power down. By explicitly associating the HDMI clock with
LCDC1 we can make sure the HDMI clock is enabled using
Runtime PM whenever the driver is accessing the hardware.

This HDMI and LCDC1 dependency is documented in the sh7372
data sheet. Older kernels did work as expected but the
recently merged (3.1-rc)

 794d78fe drivers: sh: late disabling of clocks V2

introduced code to turn off clocks lacking software reference
which happens to include the HDMI clock that is needed by
LCDC1 to operate as expected.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Since sci_port_enable() and sci_port_disable() may be run with
interrupts off and they execute pm_runtime_get_sync() and
pm_runtime_put_sync(), respectively, the SCI device's
power.irq_safe flag has to be set to indicate that it is safe
to execute runtime PM callbacks for this device with interrupts off.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>

The lock member of struct pm_clk_data is of type struct mutex,
which is a problem, because the suspend and resume routines
defined in drivers/base/power/clock_ops.c cannot be executed
with interrupts disabled for this reason.  Modify
struct pm_clk_data so that its lock member is a spinlock.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: Add status and return request handlers
  HID: wiimote: Add drm request
  HID: wiimote: Register led class devices
  HID: wiimote: Correctly call HID open/close callbacks
  HID: wiimote: Simplify synchronization
  HID: usbhid: Add support for SiGma Micro chip
  HID: add support for new revision of Apple aluminum keyboard

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad714x - read the interrupt status registers in a row
  Input: ad714x - use DMA-safe buffers for spi_write()
  Input: ad714x - fix endianness issues
  Input: ad714xx-spi - force SPI bus into the default 8-bit mode
  Input: ep93xx_keypad - add missing include of linux/module.h
  Input: tnetv107x-ts - add missing include of linux/module.h
  Input: max11801_ts - correct license statement
  Input: atmel_mxt_ts - report pressure information from the driver
  Input: bcm5974 - Add support for newer MacBookPro8,2
  Input: wacom - report id 3 returns 4 bytes of data
  Input: wacom - add WAC_MSG_RETRIES define
  Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
  Input: tegra-kbc - correct call to input_free_device
  Input: mpu3050 - correct call to input_free_device
  Input: bcm5974 - add support for touchpads found in MacBookAir4,2
  Input: mma8450 - fix module device table type
  Input: remove CLOCK_TICK_RATE from analog joystick driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
  fuse: mark pages accessed when written to
  fuse: delete dead .write_begin and .write_end aops
  fuse: fix flock
  fuse: fix non-ANSI void function notation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Allow handling signals when stack is corrupted.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  bridge: fix a possible net_device leak
  net: Documentation: RFC 2553bis is now RFC 3493
  atm: br2684: Fix oops due to skb->dev being NULL
  ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
  net: netdev-features.txt update to Documentation/networking/00-INDEX
  vlan: reset headers on accel emulation path
  forcedeth: call vlan_mode only if hw supports vlans
  via-velocity: remove non-tagged packet filtering
  bonding:reset backup and inactive flag of slave
  net_sched: fix port mirror/redirect stats reporting
  sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
  gianfar: reduce stack usage in gianfar_ethtool.c
  net: minor update to Documentation/networking/scaling.txt
  net: add missing entries to Documentation/networking/00-INDEX
  gianfar: prevent buggy hw rx vlan tagging
  net: sh_eth: Fix build by forgot including linux/interrupt.h
  drivers/net/can/sja1000/plx_pci.c: eliminate double free
  usbnet/cdc_ncm: Don't use stack variables for DMA
  vmxnet3: Don't enable vlan filters in promiscuous mode.
  iwlagn: sysfs couldn't find the priv pointer
  ...

FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the
message processing could overrun and result in a "kernel BUG at
fs/fuse/dev.c:629!"
Reported-by: Han-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, vdso: On system call restart after SYSENTER, use int $0x80
  x86, UV: Remove UV delay in starting slave cpus
  x86, olpc: Wait for last byte of EC command to be accepted

When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle
the arguments to match the int $0x80 calling convention.  This was
probably a design mistake, but it's what it is now.  This causes
errors if the system call as to be restarted.

For SYSENTER, we have to invoke the instruction from the vdso as the
return address is hardcoded.  Accordingly, we can simply replace the
jump in the vdso with an int $0x80 instruction and use the slower
entry point for a post-restart.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com
Cc: <stable@kernel.org>

Fixes fallout due to the removal of the cast in commit aa462abe
("mm: fix __page_to_pfn for a const struct page argument")
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix tracing builds inside the source tree
  xfs: remove subdirectories
  xfs: don't expect xfs headers to be in subdirectories

* git://git.infradead.org/users/cbou/battery-3.1:
  s3c-adc-battery: Fix compilation error due to missing header (module.h)
  max8997_charger: Needs module.h
  max8998_charger: Needs module.h

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector
  drm/ttm: ensure ttm for new node is bound before calling move_notify()
  drm/ttm: unbind ttm before destroying node in accel move cleanup
  drm/ttm: fix ttm_bo_add_ttm(user) failure path
  drm/radeon: Make vramlimit parameter actually work.
  drm/radeon: Explicitly print GTT/VRAM offsets on test failure.
  drm/radeon: Take IH ring into account for test size calculation.
  drm/radeon/alpha: Add Alpha support to Radeon DRM code

This reverts commit f3637a5f.

It turns out that this breaks several drivers, one example being OMAP
boards which use the on-board OMAP UARTs and the omap-serial driver that
will not boot to userspace after the commit.

Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ
handler type mismatch' errors:

  IRQ handler type mismatch for IRQ 74
  current handler: serial idle
  ...

and the reason is that setting IRQF_ONESHOT will now result in those
interrupt handlers having different IRQF flags, and thus being
unsharable.  So the commit log in the reverted commit:

                            "Since it is required for those users and
    there is no difference for others it makes sense to add this flag
    unconditionally."

is simply not true: there may not be any difference from a "actions at
irq time", but there is a *big* difference wrt this flag testing irq
management (see __setup_irq() in kernel/irq/manage.c).

One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but
right now the safe course of action is to revert the change.  Let's
revisit this in a later merge window.
Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data
   to i2c bus for a HDMI connector that is not implemented/existent
   on the notebook's board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook

   BugLink: http://bugs.launchpad.net/bugs/826677Signed-off-by: Thomas Reim <reimth@gmail.com>
Acked-by: Chris Routh <routhy@gmail.com>
Cc: <stable@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.

Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.

The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.

Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.

Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

ttm_tt_destroy kfrees passed object, so we need to nullify
a reference to it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.

These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.
Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Jan Beulich reported a possible net_device leak in bridge code after
commit bb900b27 (bridge: allow creating bridge devices with netlink)
Reported-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code really requires the current source directory to be in the
header search path.  We already do this if building with an object
tree separate from the source, but it needs to be added manually
if building inside the source.  The cflags addition for it accidentally
got removed when collapsing the xfs directory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

Signed-off-by: Geoffrey Thomas <geofft@mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Add group event scheduling option to perf record/stat
  MAINTAINERS: Fix list of perf events source files
  perf tools: Fix build against newer glibc
  perf tools: Fix error handling of unknown events
  perf evlist: Fix missing event name init for default event
  perf list: Fix exit value

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/tracing: Fix tracing config option properly
  xen: Do not enable PV IPIs when vector callback not present
  xen/x86: replace order-based range checking of M2P table by linear one
  xen: xen-selfballoon.c needs more header files

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

The interrupt status registers should be read in row to avoid invalid data.

Alter "read" method for both bus options to allow reading several registers
in a row and make sure we read interrupt status registers properly.

Read sequence saves 50% of bus transactions compared to single register
reads. So use it also for the result registers, which are also located
in a row.

Also update copyright notice.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

spi_write() requires use of DMA-safe (cacheline aligned) buffers.
Also use the same buffers when reading data since to avoid extra
locking and potential memory allocation in spi_write_then_read().
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>