- 11 Jun, 2012 3 commits
-
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
isl_fixed_ops does not implement set_voltage_sel callback, adding map_voltage here is misleading. Signed-off-by:
-
- 08 Jun, 2012 2 commits
-
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
- 07 Jun, 2012 8 commits
-
-
Axel Lin authored
Also adds tps6586x_ldo0_voltages mapping table for LDO0, so we can remove the hack in tps6586x_list_voltage() and convert it to regulator_list_voltage_table. Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
It's a little bit hard to read that the "else" case means id == PALMAS_REG_SMPS10. if (id != PALMAS_REG_SMPS10){ do something for the cases id != PALMAS_REG_SMPS10; } else { do something for the case id == PALMAS_REG_SMPS10; } This patch changes above syntax to switch statement. Signed-off-by:Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by:
-
Axel Lin authored
Current code actually clears more bits than PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK bits. Signed-off-by:
-
Axel Lin authored
For linear mappings, we can use below equation to get the voltage difference between new_selector and old_selector: abs(new_selector - old_selector) * rdev->desc->uV_step Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Axel Lin authored
For fixed voltage, DA9030_LDO13 and DA9034_LDO5, the info->vol_reg is DA9030_INVAL/DA9034_INVAL. It does not make sense to read/write to DA9030_INVAL/DA9034_INVAL address. Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Fixed voltage is a kind of linear mapping where n_voltages is 1. This change allows [list|map]_voltage_linear to be used for fixed voltage. For fixed voltage, n_voltages is 1 and the only valid selector is 0. Thus we actually don't care the uV_step setting. Signed-off-by:
-
- 05 Jun, 2012 2 commits
-
-
Axel Lin authored
The voltage mapping table for LDO2 is exactly the same as VDCDCx. Thus we can use one mapping table for both LDO2 and VDCDCx instead of duplicating the mapping table. Signed-off-by:
-
Axel Lin authored
The min_uV and max_uV are not used in this driver. For table based voltage mappings, we can get min_uV and max_uV by info->table[0] and info->table[table_len -1]. Thus remove min_uV and max_uV from struct tps_info. Signed-off-by:
-
- 04 Jun, 2012 4 commits
-
-
Axel Lin authored
Fix below checkpatch warnings: $ scripts/checkpatch.pl -f drivers/regulator/max77686.c ERROR: return is not a function, parentheses are not required + return (DIV_ROUND_UP(rdev->desc->uV_step WARNING: line over 80 characters + .ops = &max77686_buck_dvs_ops, \ total: 1 errors, 1 warnings, 339 lines checked Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Mark Brown authored
Since there are two linear ranges for the LDO voltages provide a voltage mapping function and then use regulator_set_voltage_sel_regmap(). Signed-off-by:
-
- 03 Jun, 2012 21 commits
-
-
Axel Lin authored
Both max77686_ops and max77686_buck_dvs_ops use simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the defult regulator_map_voltage_iterate. Signed-off-by:
-
Axel Lin authored
wm8350_dcdc_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by:
-
Lee Jones authored
The 'name' field in 'struct of_regulator_match' expects to match with its corresponding regulator device node in the Device Tree. This patch renames each of the regulators in the db8500-prcum regulator driver so this is true. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Lee Jones authored
The 'name' field in 'struct of_regulator_match' expects to match with its corresponding regulator device node in the Device Tree. This patch renames each of the regulators in the ab8500 regulator driver so this is true. Signed-off-by:
-
Axel Lin authored
Use the new of_match_ptr() macro for the of_match_table pointer entry to avoid having to #define match NULL. Signed-off-by:
-
Jonghwa Lee authored
Add driver for support max77686 regulator. MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the volatege of regulator on max77686 chip with using regmap. Signed-off-by:
Chiwoong Byun <woong.byun@samsung.com> Signed-off-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by:
Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by:
-
Axel Lin authored
wm8400_dcdc_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by:
-
Axel Lin authored
wm831x_alive_ldo_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Mark Brown authored
The WM8350 DCDCs have a simple linear mapping from selectors to voltages so can be converted very simply to use the new infrastructure for a nice reduction in code size. Signed-off-by: -
Mark Brown authored
Signed-off-by: -
Mark Brown authored
Signed-off-by: -
Axel Lin authored
regulator: ab8500: Let regulator core handle the case no delay for setting new voltage if regulator is off Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
