Pull asm-generic cleanup from Arnd Bergmann:
 "I have only one patch for asm-generic in this release, this one is
  from James Hogan and updates the generic system call table for
  renameat2 so we don't need to provide both renameat and renameat2 in
  newly added architectures"

* tag 'asm-generic-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: Drop renameat syscall from default list

Pull nfsd updates from Bruce Fields:
 "A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
  Lever"

* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
  sunrpc: fix stripping of padded MIC tokens
  svcrpc: autoload rdma module
  svcrdma: Generalize svc_rdma_xdr_decode_req()
  svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
  svcrdma: Drain QP before freeing svcrdma_xprt
  svcrdma: Post Receives only for forward channel requests
  svcrdma: Remove superfluous line from rdma_read_chunks()
  svcrdma: svc_rdma_put_context() is invoked twice in Send error path
  svcrdma: Do not add XDR padding to xdr_buf page vector
  svcrdma: Support IPv6 with NFS/RDMA
  nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
  Remove unnecessary allocation

Pull ext4 updates from Ted Ts'o:
 "Fix a number of bugs, most notably a potential stale data exposure
  after a crash and a potential BUG_ON crash if a file has the data
  journalling flag enabled while it has dirty delayed allocation blocks
  that haven't been written yet.  Also fix a potential crash in the new
  project quota code and a maliciously corrupted file system.

  In addition, fix some DAX-specific bugs, including when there is a
  transient ENOSPC situation and races between writes via direct I/O and
  an mmap'ed segment that could lead to lost I/O.

  Finally the usual set of miscellaneous cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: pre-zero allocated blocks for DAX IO
  ext4: refactor direct IO code
  ext4: fix race in transient ENOSPC detection
  ext4: handle transient ENOSPC properly for DAX
  dax: call get_blocks() with create == 1 for write faults to unwritten extents
  ext4: remove unmeetable inconsisteny check from ext4_find_extent()
  jbd2: remove excess descriptions for handle_s
  ext4: remove unnecessary bio get/put
  ext4: silence UBSAN in ext4_mb_init()
  ext4: address UBSAN warning in mb_find_order_for_block()
  ext4: fix oops on corrupted filesystem
  ext4: fix check of dqget() return value in ext4_ioctl_setproject()
  ext4: clean up error handling when orphan list is corrupted
  ext4: fix hang when processing corrupted orphaned inode list
  ext4: remove trailing \n from ext4_warning/ext4_error calls
  ext4: fix races between changing inode journal mode and ext4_writepages
  ext4: handle unwritten or delalloc buffers before enabling data journaling
  ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart()
  ext4: do not ask jbd2 to write data for delalloc buffers
  jbd2: add support for avoiding data writes during transaction commits
  ...

Pull spi updates from Mark Brown:
 "Another quiet release for SPI, almost entirely driver specific changes
  with the diffstat dominated by two new drivers which are about two
  thirds of it in terms of lines of code:

   - new drivers for PIC32 standard and SQI controllers
   - the Cadence driver has had runtime PM support added and quite a few
     fixes and cleanups
   - flash-specific accelerated path support now has a feature query
     interface
   - the pxa2xx driver has been moved to use the core DMA mapping support"

* tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits)
  spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'
  spi: dw-pci: Spelling s/paltforms/platforms/g
  spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
  spi: Fix simple typo s/impelment/implement
  spi: rockchip: potential NULL dereference on error
  spi: zynqmp: disable clocks in error paths
  spi: Drop unnecessary dependencies on relaxed I/O accessors
  spi: qup: Add spi_master_put in remove function
  spi: qup: Handle clocks in pm_runtime suspend and resume
  spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
  spi: st-ssc4: Allow compile test build
  spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
  spi: davinci: Use dma_request_chan() for requesting DMA channel
  spi: pic32: Fix checking return value of devm_ioremap_resource
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: Drop duplicate code to set master->dev.parent
  spi: pic32: Set proper bits_per_word_mask
  spi: return error if kmap'd buffers passed to spi_map_buf()
  spi: core: add hook flash_read_supported to spi_master
  spi: pic32-sqi: silence array overflow warning
  ...

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

Pull xen bug fixes from David Vrabel.

* tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: use same main loop for counting and remapping pages
  xen/events: Don't move disabled irqs
  xen/x86: actually allocate legacy interrupts on PV guests
  Xen: don't warn about 2-byte wchar_t in efi
  xen/gntdev: reduce copy batch size to 16
  xen/x86: don't lose event interrupts

Pull virtio updates from Michael Tsirkin:
 "Looks like a quiet cycle for virtio.  There's a new inorder option for
  the ringtest tool, and a bugfix for balloon for ppc platforms when
  using virtio 1 mode"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  ringtest: pass buf != NULL
  virtio_balloon: fix PFN format for virtio-1
  virtio: add inorder option

Pull nios2 update from Ley Foon Tan:
 - add order-only DTC dependency to %.dtb target
 - fix libgcc location detection

* tag 'nios2-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: Add order-only DTC dependency to %.dtb target
  nios2: Fix libgcc location detection

Pull Microblaze updates from Michal Simek:

 - Wire-up new syscalls

 - Fix link error

* tag 'microblaze-4.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: pci: export isa_io_base to fix link errors
  microblaze: Wire up userfaultfd, membarrier, mlock2 syscalls

Instead of having two functions for cycling through the E820 map in
order to count to be remapped pages and remap them later, just use one
function with a caller supplied sub-function called for each region to
be processed. This eliminates the possibility of a mismatch between
both loops which showed up in certain configurations.
Suggested-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Commit ff1e22e7 ("xen/events: Mask a moving irq") open-coded
irq_move_irq() but left out checking if the IRQ is disabled. This broke
resuming from suspend since it tries to move a (disabled) irq without
holding the IRQ's desc->lock. Fix it by adding in a check for disabled
IRQs.

The resulting stacktrace was:
kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31!
invalid opcode: 0000 [#1] SMP
Modules linked in: xenfs xen_privcmd ...
CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu
Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016
task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000
RIP: 0010:[<ffffffff810e26e2>]  [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0
RSP: 0018:ffff88003d7bfc50  EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8
RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000
R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0
R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff
FS:  0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0
 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009
 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66
Call Trace:
 [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0
 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150
 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360
 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180
 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0
 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80
 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140
 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220
 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20
 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160
 [<ffffffff810a3830>] ? sort_range+0x30/0x30
 [<ffffffff810a0588>] kthread+0xd8/0xf0
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70
 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

b4ff8389 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org

The XEN UEFI code has become available on the ARM architecture
recently, but now causes a link-time warning:

ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

This seems harmless, because the efi code only uses 2-byte
characters when interacting with EFI, so we don't pass on those
strings to elsewhere in the system, and we just need to
silence the warning.

It is not clear to me whether we actually need to build the file
with the -fshort-wchar flag, but if we do, then we should also
pass --no-wchar-size-warning to the linker, to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")

IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number
of hypercalls.  The stack is used to avoid a memory allocation in a
hot path. However, a batch size of 24 requires more than 1024 bytes of
stack which in some configurations causes a compiler warning.

    xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’:
    xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is
    larger than 1024 bytes [-Wframe-larger-than=]

This is a harmless warning as there is still plenty of stack spare,
but people keep trying to "fix" it.  Reduce the batch size to 16 to
reduce stack usage to less than 1024 bytes.  This should have minimal
impact on performance.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.

Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>

Merge yet more updates from Andrew Morton:

 - Oleg's "wait/ptrace: assume __WALL if the child is traced".  It's a
   kernel-based workaround for existing userspace issues.

 - A few hotfixes

 - befs cleanups

 - nilfs2 updates

 - sys_wait() changes

 - kexec updates

 - kdump

 - scripts/gdb updates

 - the last of the MM queue

 - a few other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (84 commits)
  kgdb: depends on VT
  drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable
  drm/radeon: make radeon_mn_get wait for mmap_sem killable
  drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable
  uprobes: wait for mmap_sem for write killable
  prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable
  exec: make exec path waiting for mmap_sem killable
  aio: make aio_setup_ring killable
  coredump: make coredump_wait wait for mmap_sem for write killable
  vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  ipc, shm: make shmem attach/detach wait for mmap_sem killable
  mm, fork: make dup_mmap wait for mmap_sem for write killable
  mm, proc: make clear_refs killable
  mm: make vm_brk killable
  mm, elf: handle vm_brk error
  mm, aout: handle vm_brk failures
  mm: make vm_munmap killable
  mm: make vm_mmap killable
  mm: make mmap_sem for write waits killable for mm syscalls
  MAINTAINERS: add co-maintainer for scripts/gdb
  ...

Merge tag 'linux-kselftest-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update for Kselftest adds:

   - a new ftrace testcase
   - fixes for ftrace and intel_pstate tests"

* tag 'linux-kselftest-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  tools: testing: define the _GNU_SOURCE macro
  kselftests/ftrace: Add a test case for event pid filtering
  kselftests/ftrace: Detect tracefs mount point

Pull tracing fix from Steven Rostedt:
 "Reviewing the selftest I recently submitted, I realize that the second
  part of it uses my old hack to get the PID of the spawned background
  tasks, which doesn't work for all shells, instead of the common use of
  $!"

* tag 'trace-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Use proper logic to find process PID

Pull arch/tile updates from Chris Metcalf:
 "This is an even quieter cycle than usual"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  Fix typo
  Fix typo
  Fix typo
  tile: sort the "select" lines in the TILE/TILEGX configs
  tile: clarify barrier semantics of atomic_add_return
  tile/defconfigs: Remove CONFIG_IPV6_PRIVACY

Pull libata sata_dwc_460ex updates from Tejun Heo:
 "Patches to bring sata_dwc_460ex up to snuff.

  It was a separate pull request because it depends on dmaengine dw
  platform changes which are now in mainline"

* 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits)
  ata: dwc: add DMADEVICES dependency
  powerpc/4xx: Device tree update for the 460ex DWC SATA
  ata: sata_dwc_460ex: make debug messages neat
  ata: sata_dwc_460ex: supply physical address of FIFO to DMA
  ata: sata_dwc_460ex: use devm_ioremap
  ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
  ata: sata_dwc_460ex: use readl/writel_relaxed()
  ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
  ata: sata_dwc_460ex: add __iomem to register base pointer
  ata: sata_dwc_460ex: get rid of incorrect cast
  ata: sata_dwc_460ex: get rid of some pointless casts
  ata: sata_dwc_460ex: remove empty libata callback
  ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
  ata: sata_dwc_460ex: get rid of global data
  ata: sata_dwc_460ex: add phy support
  ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
  ata: sata_dwc_460ex: skip dma setup for non-dma commands
  ata: sata_dwc_460ex: select only core part of DMA driver
  ata: sata_dwc_460ex: DMA is always a flow controller
  ...

Pull libata ZAC support from Tejun Heo:
 "This contains Zone ATA Command support for Shingled Magnetic Recording
  devices.

  In addition to sending the new commands down to the device, as ZAC
  commands depend on getting a lot of responses from the device, piping
  up responses is beefed up too.  However, it doesn't involve changes to
  libata core mechanism or its interaction with upper layers, so I'm not
  expecting too many fallouts.

  Kudos to Hannes for driving SMR support"

* 'for-4.7-zac' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (28 commits)
  libata: support host-aware and host-managed ZAC devices
  libata: support device-managed ZAC devices
  libata: NCQ encapsulation for ZAC MANAGEMENT OUT
  libata: Implement ZBC OUT translation
  libata: implement ZBC IN translation
  libata: fixup ZAC device disabling
  libata-scsi: Generate sense code for disabled devices
  libata-trace: decode subcommands
  libata: Check log page directory before accessing pages
  libata: Add command definitions for NCQ Encapsulation for READ LOG DMA EXT
  libata: Separate out ata_dev_config_ncq_send_recv()
  libata/libsas: Define ATA_CMD_NCQ_NON_DATA
  libsas: enable FPDMA SEND/RECEIVE
  libata: do not attempt to retrieve sense code twice
  libata-scsi: Set information sense field for invalid parameter
  libata-scsi: set bit pointer for sense code information
  libata-scsi: Set field pointer in sense code
  scsi: add scsi_set_sense_field_pointer()
  libata: Implement control mode page to select sense format
  libata-scsi: generate correct ATA pass-through sense
  ...

Pull more security subsystem updates from James Morris:
 "Minor updates for the keys code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MAINTAINERS: Update keyrings record and add asymmetric keys record
  lib: asn1_decoder - add MODULE_LICENSE("GPL")
  KEYS: The PKCS#7 test key type should use the secondary keyring

With VT=n, the kernel build fails with:

  drivers/built-in.o: In function `kgdboc_pre_exp_handler':
  kgdboc.c:(.text+0x7b5aa): undefined reference to `fg_console'
  kgdboc.c:(.text+0x7b5ce): undefined reference to `vc_cons'
  kgdboc.c:(.text+0x7b5d5): undefined reference to `vc_cons'

kgdboc.o is built when KGDB_SERIAL_CONSOLE is set.  So make
KGDB_SERIAL_CONSOLE depend on HW_CONSOLE which includes those symbols.

Link: http://lkml.kernel.org/r/1459412955-4696-1-git-send-email-jslaby@suse.czSigned-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: "Jim Davis" <jim.epost@gmail.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amdgpu_mn_get which is called during ioct path relies on mmap_sem for
write.  If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving.  Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.

[arnd@arndb.de: use ERR_PTR() to return from amdgpu_mn_get]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radeon_mn_get which is called during ioct path relies on mmap_sem for
write.  If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving.  Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i915_gem_mmap_ioctl relies on mmap_sem for write.  If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving.  Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xol_add_vma needs mmap_sem for write.  If the waiting task gets killed
by the oom killer it would block oom_reaper from asynchronous address
space reclaim and reduce the chances of timely OOM resolving.  Wait for
the lock in the killable mode and return with EINTR if the task got
killed while waiting.

Do not warn in dup_xol_work if __create_xol_area failed due to fatal
signal pending because this is usually considered a kernel issue.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PR_SET_THP_DISABLE requires mmap_sem for write.  If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving.  Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

setup_arg_pages requires mmap_sem for write.  If the waiting task gets
killed by the oom killer it would block oom_reaper from asynchronous
address space reclaim and reduce the chances of timely OOM resolving.
Wait for the lock in the killable mode and return with EINTR if the task
got killed while waiting.  All the callers are already handling error
path and the fatal signal doesn't need any additional treatment.

The same applies to __bprm_mm_init.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aio_setup_ring waits for mmap_sem in writable mode.  If the waiting task
gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving.  Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.  This will also expedite the
return to the userspace and do_exit.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Benamin LaHaise <bcrl@kvack.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coredump_wait waits for mmap_sem for write currently which can prevent
oom_reaper to reclaim the oom victims address space asynchronously
because that requires mmap_sem for read.  This might happen if the oom
victim is multi threaded and some thread(s) is holding mmap_sem for read
(e.g.  page fault) and it is stuck in the page allocator while other
thread(s) reached coredump_wait already.

This patch simply uses down_write_killable and bails out with EINTR if
the lock got interrupted by the fatal signal.  do_coredump will return
right away and do_group_exit will take care to zap the whole thread
group.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages.  If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>	[x86 vdso]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shmat and shmdt rely on mmap_sem for write.  If the waiting task gets
killed by the oom killer it would block oom_reaper from asynchronous
address space reclaim and reduce the chances of timely OOM resolving.
Wait for the lock in the killable mode and return with EINTR if the task
got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dup_mmap needs to lock current's mm mmap_sem for write.  If the waiting
task gets killed by the oom killer it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving.  Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CLEAR_REFS_MM_HIWATER_RSS and CLEAR_REFS_SOFT_DIRTY are relying on
mmap_sem for write.  If the waiting task gets killed by the oom killer
and it would operate on the current's mm it would block oom_reaper from
asynchronous address space reclaim and reduce the chances of timely OOM
resolving.  Wait for the lock in the killable mode and return with EINTR
if the task got killed while waiting.  This will also expedite the
return to the userspace and do_exit even if the mm is remote.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Petr Cermak <petrcermak@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that all the callers handle vm_brk failure we can change it wait for
mmap_sem killable to help oom_reaper to not get blocked just because
vm_brk gets blocked behind mmap_sem readers.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

load_elf_library doesn't handle vm_brk failure although nothing really
indicates it cannot do that because the function is allowed to fail due
to vm_mmap failures already.  This might be not a problem now but later
patch will make vm_brk killable (resp.  mmap_sem for write waiting will
become killable) and so the failure will be more probable.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vm_brk is allowed to fail but load_aout_binary simply ignores the error
and happily continues.  I haven't noticed any problem from that in real
life but later patches will make the failure more likely because vm_brk
will become killable (resp.  mmap_sem for write waiting will become
killable) so we should be more careful now.

The error handling should be quite straightforward because there are
calls to vm_mmap which check the error properly already.  The only
notable exception is set_brk which is called after beyond_if label.  But
nothing indicates that we cannot move it above set_binfmt as the two do
not depend on each other and fail before we do set_binfmt and alter
reference counting.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Almost all current users of vm_munmap are ignoring the return value and
so they do not handle potential error.  This means that some VMAs might
stay behind.  This patch doesn't try to solve those potential problems.
Quite contrary it adds a new failure mode by using down_write_killable
in vm_munmap.  This should be safer than other failure modes, though,
because the process is guaranteed to die as soon as it leaves the kernel
and exit_mmap will clean the whole address space.

This will help in the OOM conditions when the oom victim might be stuck
waiting for the mmap_sem for write which in turn can block oom_reaper
which relies on the mmap_sem for read to make a forward progress and
reclaim the address space of the victim.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All the callers of vm_mmap seem to check for the failure already and
bail out in one way or another on the error which means that we can
change it to use killable version of vm_mmap_pgoff and return -EINTR if
the current task gets killed while waiting for mmap_sem.  This also
means that vm_mmap_pgoff can be killable by default and drop the
additional parameter.

This will help in the OOM conditions when the oom victim might be stuck
waiting for the mmap_sem for write which in turn can block oom_reaper
which relies on the mmap_sem for read to make a forward progress and
reclaim the address space of the victim.

Please note that load_elf_binary is ignoring vm_mmap error for
current->personality & MMAP_PAGE_ZERO case but that shouldn't be a
problem because the address is not used anywhere and we never return to
the userspace if we got killed.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>