So drivers using the atomic interfaces expect that they can acquire
additional locks internal to the driver as-needed. Examples would be
locks to protect shared state like shared display PLLs.

Unfortunately the legacy ioctls assume that all locking is fully done
by the drm core. Now for those paths which grab all locks we already
have to keep around an acquire context in dev->mode_config. Helper
functions that implement legacy interfaces in terms of atomic support
can therefore grab this acquire contexts and reuse it.

The only interfaces left are the cursor and pageflip ioctls. So add
functions to grab the crtc lock these need using an acquire context
and preserve it for atomic drivers to reuse.

v2:
- Fixup comments&kerneldoc.
- Drop the WARNING from modeset_lock_all_crtcs since that can be used
  in legacy paths with crtc locking.

v3: Fix a type on the kerneldoc Dave spotted.

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Somehow we've forgotten about this little bit of OCD.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In the atomic state we'll have an array of states for crtcs, planes
and connectors and need to be able to at them by their index. We
already have a drm_crtc_index function so add the missing ones for
planes and connectors.

If it later on turns out that the list walking is too expensive we can
add the index to the relevant modeset objects.

Rob Clark doesn't like the loops too much, but we can always add an
obj->idx parameter later on. And for now reiterating is actually safer
since nowadays we have hotpluggable connectors (thanks to DP MST).

v2: Fix embarrassing copypasta fail in kerneldoc and header
declarations, spotted by Matt Roper.

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

After spending slightly more time than I'd care to admit debugging the
various and presumably spectacular way things fail when you pass too low
a value to drm_vblank_init() (thanks console-lock for not letting me see
the carnage!), I decided it might be a good idea to add some sanity
checking.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Warn when there are events on the file_priv->event_list just before
file_priv gets freed. This can occur if the driver doesn't clean up
pending page flip events in ->preclose().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.

We also then expose the cmdline user mode in the connector mode lists.

v2: Rebase after connector->name upheaval.

v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely
simplifies things while at that.

v4: Fix checkpatch.

v5: Select FB_CMDLINE to adapt to the changed fbdev patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In drm/i915 we want to get at the video= cmdline modes even when we
don't have fbdev support enabled, so that users can always override
the kernel's initial mode selection.

But that gives us a direct depency upon the parsing code in the fbdev
subsystem. Since it's so little code just extract these 2 functions
and always build them in.

Whiel at it fix the checkpatch fail in this code.

v2: Also move fb_mode_option. Spotted by the kbuild.

v3: Review from Geert:
- Keep the old copyright notice from fb_mem.c, although I have no
idea what exactly applies.
- Only compile this when needed.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

--

I prefer if we can merge this through drm-next since we'll use it
there in follow-up patches.
-Daniel

The current refcounting scheme is that the fb lookup idr also holds a
reference. This works out nicely bacause thus far we've always
explicitly cleaned up idr entries for framebuffers:
- Userspace fbs get removed in the rmfb ioctl or when the drm file
  gets closed.
- Kernel fbs (for fbdev emulation) get cleaned up by the driver code
  at module unload time.

But now i915 also reconstructs the bios fbs for a smooth transition.
And that fb is purely transitional and should get removed immmediately
once all crtcs stop using it. Of course if the i915 fbdev code decides
to reuse it as the main fbdev fb then it shouldn't be cleaned up, but
in that case the fbdev code will grab it's own reference.

The problem is now that we also want to register that takeover fb in
the idr, so that userspace can do a smooth transition (animated maybe
even!) itself. But currently we have no one who will clean up the idr
reference once that fb isn't useful any more, and so essentially leak
it.

Fix this by no longer holding a full fb reference for the idr, but
instead just have a weak reference using kref_get_unless_zero. But
that requires us to synchronize and clean up with the idr and fb_lock
in drm_framebuffer_free, so add that. It's a bit ugly that we have to
unconditionally grab the fb_lock, but without that someone might creep
through a race.

This leak was caught by the fb leak check in drm_mode_config_cleanup.
Originally the leak was introduced in

commit 46f297fb
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Mar 7 08:57:48 2014 -0800

    drm/i915: add plane_config fetching infrastructure v2

Cc:  Jesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77511Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In my review of

commit 98f75de4
Author: Rob Clark <robdclark@gmail.com>
Date:   Fri May 30 11:37:03 2014 -0400

    drm: add object property typ

I asked for a check to make sure that we never leak an fb from the
generic mode object lookup since those have completely different
lifetime rules. Rob added it, but outside of the idr mutex, which
means that our dereference of obj->type can already chase free'd
memory.

Somehow I didn't spot this, so fix this asap.

v2: Simplify the conditionals as suggested by Chris.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

In order to prevent external observers walking the list of open DRM
files from seeing an invalid drm_file_private in the process of being
torndown, the first operation we need to take is to unlink the
drm_file_private from that list.

	general protection fault: 0000 [#1] PREEMPT SMP
	Modules linked in: i915 i2c_algo_bit drm_kms_helper drm lpc_ich mfd_core nls_iso8859_1 i2c_hid video hid_generic usbhid hid e1000e ahci ptp libahci pps_core
	CPU: 3 PID: 8220 Comm: cat Not tainted 3.16.0-rc6+ #4
	Hardware name: Intel Corporation Shark Bay Client platform/WhiteTip Mountain 1, BIOS HSWLPTU1.86C.0119.R00.1303230105 03/23/2013
	task: ffff8800219642c0 ti: ffff880047024000 task.ti: ffff880047024000
	RIP: 0010:[<ffffffffa0137c70>]  [<ffffffffa0137c70>] per_file_stats+0x110/0x160 [i915]
	RSP: 0018:ffff880047027d48  EFLAGS: 00010246
	RAX: 6b6b6b6b6b6b6b6b RBX: ffff880047027e30 RCX: 0000000000000000
	RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88003a05cd00
	RBP: ffff880047027d58 R08: 0000000000000001 R09: 0000000000000000
	R10: ffff8800219642c0 R11: 0000000000000000 R12: ffff88003a05cd00
	R13: 0000000000000000 R14: ffff88003a05cd00 R15: ffff880047027d88
	FS:  00007f5f73a13740(0000) GS:ffff88014e380000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 00000000023ff038 CR3: 0000000021a4b000 CR4: 00000000001407e0
	Stack:
	 0000000000000001 000000000000ffff ffff880047027dc8 ffffffff813438e4
	 ffff880047027e30 ffffffffa0137b60 ffff880021a8af58 ffff880021a8f1a0
	 ffff8800a2061fb0 ffff8800a2062048 ffff8800a2061fb0 ffff8800a1e23478
	Call Trace:
	 [<ffffffff813438e4>] idr_for_each+0xf4/0x180
	 [<ffffffffa0137b60>] ? i915_gem_stolen_list_info+0x1f0/0x1f0 [i915]
	 [<ffffffffa013a17a>] i915_gem_object_info+0x5ca/0x6a0 [i915]
	 [<ffffffff81193ec5>] seq_read+0xf5/0x3a0
	 [<ffffffff8116d950>] vfs_read+0x90/0x150
	 [<ffffffff8116e509>] SyS_read+0x49/0xb0
	 [<ffffffff815d8622>] tracesys+0xd0/0xd5
	Code: 01 00 00 49 39 84 24 08 01 00 00 74 55 49 8b 84 24 b8 00 00 00 48 01 43 18 31 c0 5b 41 5c 5d c3 0f 1f 00 49 8b 44 24 08 4c 89 e7 <48> 8b 70 28 48 81 c6 48 80 00 00 e8 80 14 01 00 84 c0 74 bc 49
	RIP  [<ffffffffa0137c70>] per_file_stats+0x110/0x160 [i915]
	RSP <ffff880047027d48>
Reported-by: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81712Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added
deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free()
are currently doing GFP_KERNEL allocation.

But these functions did not get updated to receive gfp_t argument.
This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions,
and removes the deadlock warning.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: Dave Airlie <airlied@redhat.com>

While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL
allocation, ttm_pool_shrink_scan() does not do it. This can result in stack
overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to
memory pressure.

  shrink_slab()
  => ttm_pool_shrink_scan()
     => ttm_page_pool_free()
        => kmalloc(GFP_KERNEL)
           => shrink_slab()
              => ttm_pool_shrink_scan()
                 => ttm_page_pool_free()
                    => kmalloc(GFP_KERNEL)

Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: Dave Airlie <airlied@redhat.com>

I can observe that RHEL7 environment stalls with 100% CPU usage when a
certain type of memory pressure is given. While the shrinker functions
are called by shrink_slab() before the OOM killer is triggered, the stall
lasts for many minutes.

One of reasons of this stall is that
ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and
are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with
_manager->lock held causes someone (including kswapd) to deadlock when
these functions are called due to memory pressure. This patch changes
"mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to
avoid deadlock.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: Dave Airlie <airlied@redhat.com>

We can use "unsigned int" instead of "atomic_t" by updating start_pool
variable under _manager->lock. This patch will make it possible to avoid
skipping when choosing a pool to shrink in round-robin style, after next
patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork).
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: Dave Airlie <airlied@redhat.com>

list_empty(&_manager->pools) being false before taking _manager->lock
does not guarantee that _manager->npools != 0 after taking _manager->lock
because _manager->npools is updated under _manager->lock.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

This series of patches add the support of DRM/KMS drivers for STMicroelectronics
chipsets stih416 and stih407.

Hardware is split in two main blocks: Compositor and TVout. Each of them
includes specific hardware IPs and the display timing are controlled by a specific
Video Timing Generator hardware IP (VTG).

Compositor is made of the follow hardware IPs:
 - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB)
   buffers
 - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers
 - HQVDP (High Quality Video Display Processor) that supports scaling,
   deinterlacing and some miscellaneous image quality improvements.
   It fetches the Video decoded buffers from memory, processes them and pushes
   them to the Compositor through a HW dedicated bus.
 - Mixer is responsible of mixing all the entries depending of their
   respective z-order and layout

TVout is divided in 3 parts:
 - HDMI to generate HDMI signals, depending of chipset version HDMI phy can
   change.
 - HDA to generate signals for HD analog TV
 - VIP to control/switch data path coming from Compositor

On stih416 compositor and Tvout are on different dies so a Video Trafic Advance
inter-die Communication mechanism (VTAC) is needed.

+---------------------------------------------+   +----------------------------------------+
| +-------------------------------+   +----+  |   |  +----+   +--------------------------+ |
| |                               |   |    |  |   |  |    |   |  +---------+     +----+  | |
| | +----+              +------+  |   |    |  |   |  |    |   |  | VIP     |---->|HDMI|  | |
| | |GPD +------------->|      |  |   |    |  |   |  |    |   |  |         |     +----+  | |
| | +----+              |Mixer |--|-->|    |  |   |  |    |---|->| switcher|             | |
| |                     |      |  |   |    |  |   |  |    |   |  |         |     +----+  | |
| |                     |      |  |   |    |  |   |  |    |   |  |         |---->|HDA |  | |
| |                     +------+  |   |VTAC|========>|VTAC|   |  +---------+     +----+  | |
| |                               |   |    |  |   |  |    |   |                          | |
| |         Compositor            |   |    |  |   |  |    |   |           TVout          | |
| +-------------------------------+   |    |  |   |  |    |   +--------------------------+ |
|                      ^              |    |  |   |  |    |             ^                  |
|                      |              |    |  |   |  |    |             |                  |
|               +--------------+      |    |  |   |  |    |      +-------------+           |
|               | VTG (master) |----->|    |  |   |  |    |----->| VTG (slave) |           |
|               +--------------+      +----+  |   |  +----+      +-------------+           |
|Digital die                                  |   |                              Analog Die|
+---------------------------------------------+   +----------------------------------------+

On stih407 Compositor and Tvout are on the same die

+-----------------------------------------------------------------+
| +-------------------------------+  +--------------------------+ |
| |                               |  |  +---------+     +----+  | |
| | +----+              +------+  |  |  | VIP     |---->|HDMI|  | |
| | |GPD +------------->|      |  |  |  |         |     +----+  | |
| | +----+              |Mixer |--|--|->| switcher|             | |
| | +----+   +-----+    |      |  |  |  |         |     +----+  | |
| | |VDP +-->+HQVDP+--->|      |  |  |  |         |---->|HDA |  | |
| | +----+   +-----+    +------+  |  |  +---------+     +----+  | |
| |                               |  |                          | |
| |         Compositor            |  |           TVout          | |
| +-------------------------------+  +--------------------------+ |
|                              ^        ^                         |
|                              |        |                         |
|                           +--------------+                      |
|                           |     VTG      |                      |
|                           +--------------+                      |
|Digital die                                                      |
+-----------------------------------------------------------------+

In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used
by HDMI driver to retrieve EDID for monitor.

To unify interfaces of GDP and VDP we create a "layer" interface called by
compositor to control both GPD and VDP.

Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions
to allocate frame buffer.

File naming convention is:
 - sti_* for IPs drivers
 - sti_drm_* for drm functions implementation.

* 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: Add DRM driver itself
  drm: sti: add Compositor
  drm: sti: add Mixer
  drm: sti: add VID layer
  drm: sti: add GDP layer
  drm: sti: add TVOut driver
  drm: sti: add HDA driver
  drm: sti: add HDMI driver
  drm: sti: add VTAC drivers
  drm: sti: add VTG driver
  drm: sti: add bindings for DRM driver

This builds upon the previous set of fixes which were pulled on 6th July.
Included in this set are:
- an update from Jean-Francois to add the missing reg documentation entry
  to the device tree documentation.
- conversion of the tda998x driver to the component helpers.

* 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  drm/i2c: tda998x: add component support
  drm/i2c: tda998x: allow re-use of tda998x support code
  drm/i2c: tda998x: fix lack of required reg in DT documentation

Conflicts:
	drivers/gpu/drm/i2c/tda998x_drv.c

This time around we have a mix of new hw enablement (mdp5 v1.3 /
apq8084), plus devicetree and various upstream changes (mostly
adapting to CCF vs downstream clk driver differences) for mdp4 /
apq8064.  With these drm/msm patches plus a few other small patchsets
(from linaro qcom integration branch.. mostly stuff queued up for
3.17) we have the inforce ifc6410 board working, with gpu.  Much nicer
to work with than ancient vendor android branch :-)

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo
  drm/msm/hdmi: enable lpm-mux if it is present
  drm/msm/mdp5: add support for MDP5 v1.3
  drm/msm: fix potential deadlock in gpu init
  drm/msm: use upstream iommu
  drm/msm: no mmu is only error if not using vram carveout
  drm/msm: fix BUG_ON() in error cleanup path
  drm/msm/mdp4: add mdp axi clk
  drm/msm: hdmi phy 8960 phy pll
  drm/msm: update generated headers
  drm/msm: DT support for 8960/8064 (v3)
  drm/msm: Implement msm drm fb_mmap callback function
  drm/msm: activate iommu support
  drm/msm: fix double struct_mutex acquire

Linux 3.16

backmerge requested by i915, nouveau and radeon authors

Conflicts:
	drivers/gpu/drm/i915/i915_gem_render_state.c
	drivers/gpu/drm/i915/intel_drv.h

HDMI_MUX_EN gpio is requested. If an error occurs, the same name
should be printed (HDMI_MUX_EN) instead of HDMI_MUX_SEL (typo).
Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

lpm-mux is programmed to enable HDMI connector
on the docking station for S805 chipset based
devices.
Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

MDP5 has several functional blocks (ie: VIG/RGB pipes, LMs, ...).
From one revision to another, these blocks' base addresses might
change due to the number of instances present in the MDP5 hw.
A way of dealing with these offset changes is to introduce
dynamic offsets 'per block'.

This change adds support for the new revision of MDP5: v1.3.
The idea is to define one hw config per MDP version and select
either one of them at runtime, after reading the MDP5 version.

Once the MDP version is known, 'per block' dynamic offsets
are initialized through a global pointer, which is then used for
read/write register access.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Somewhere along the way, the firmware loader sprouted another lock
dependency, resulting in possible deadlock scenario:

 &dev->struct_mutex --> &sb->s_type->i_mutex_key#2 --> &mm->mmap_sem

which is problematic vs things like gem mmap.

So introduce a separate mutex to synchronize gpu init.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Downstream kernel IOMMU had a non-standard way of dealing with multiple
devices and multiple ports/contexts.  We don't need that on upstream
kernel, so rip out the crazy.

Note that we have to move the pinning of the ringbuffer to after the
IOMMU is attached.  No idea how that managed to work properly on the
downstream kernel.

For now, I am leaving the IOMMU port name stuff in place, to simplify
things for folks trying to backport latest drm/msm to device kernels.
Once we no longer have to care about pre-DT kernels, we can drop this
and instead backport upstream IOMMU driver.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Downstream kernel holds this clk via a fake-parent relationship.
Upstream clock framework requires that we hold it explicitly.
Signed-off-by: Rob Clark <robdclark@gmail.com>

On downstream kernel the clk driver directly bangs hdmi phy registers.
For upstream kernel, we need to model this as a clock and register with
the clock framework.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
add necessary DT support so that we can use drm/msm on upstream kernel.

v2: update for review comments
v3: rebase on component helper changes
Signed-off-by: Rob Clark <robdclark@gmail.com>

This change implements msm drm specific fb_mmap function for fb device
to properly map the fb address to userspace.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com> (+ minor comment tweak)

This changes activates the iommu support for MDP5, through the
platform config structure.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Mutex is already grabbed in show_locked().. somehow this slipped
through.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Merge tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel into drm-next

Final feature pull for 3.17.

drm-intel-next-2014-07-25:
- Ditch UMS support (well just the config option for now)
- Prep work for future platforms (Sonika Jindal, Damien)
- runtime pm/soix fixes (Paulo, Jesse)
- psr tracking improvements, locking fixes, now enabled by default!
- rps fixes for chv (Deepak, Ville)
- drm core patches for rotation support (Ville, Sagar Kamble) - the i915 parts
  unfortunately didn't make it yet
- userptr fixes (Chris)
- minimum backlight brightness (Jani), acked long ago by Matthew Garret on irc -
  I've forgotten about this patch :(

QA is a bit unhappy about the DP MST stuff since it broke hpd testing a
bit, but otherwise looks sane. I've backmerged drm-next to resolve
conflicts with the mst stuff, which means the new tag itself doesn't
contain the overview as usual.

* tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel: (75 commits)
  drm/i915/userptr: Keep spin_lock/unlock in the same block
  drm/i915: Allow overlapping userptr objects
  drm/i915: Ditch UMS config option
  drm/i915: respect the VBT minimum backlight brightness
  drm/i915: extract backlight minimum brightness from VBT
  drm/i915: Replace HAS_PCH_SPLIT which incorrectly lets some platforms in
  drm/i915: Returning from increase/decrease of pllclock when invalid
  drm/i915: Setting legacy palette correctly for different platforms
  drm/i915: Avoid incorrect returning for some platforms
  drm/i915: Writing proper check for reading of pipe status reg
  drm/i915: Returning the right VGA control reg for platforms
  drm/i915: Allowing changing of wm latencies for valid platforms
  drm/i915: Adding HAS_GMCH_DISPLAY macro
  drm/i915: Fix possible overflow when recording semaphore states.
  drm/i915: Do not unmap object unless no other VMAs reference it
  drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disable
  drm/i915: Reorder ctx unref on ppgtt cleanup
  drm/i915/error: Check the potential ctx obj's vm
  drm/i915: Fix printing proper min/min/rpe values in debugfs
  drm/i915: BDW can also detect unclaimed registers
  ...

Daniel pointed out with hotplug that userspace could be trying to oops us
as root for lols, and that to be correct we shouldn't register the object
with the idr before we have fully set the connector object up.

His proposed solution was a lot more life changing, this seemed like a simpler
proposition to me, get the connector object id from the idr, but don't
register the object until the drm_connector_register callback.

The open question is whether the drm_mode_object_register needs a bigger lock
than just the idr one, but I can't see why it would, but I can be locking
challenged.

v2: fix bool noreg into sane - add comment.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

On HSW+, the digital encoders are shared between HDMI and DP outputs,
with one encoder masquerading as both. The VBT should tell us if we need
to have DP or HDMI support on a particular port, but if we don't have DP
support and we enable the DP hpd pulse handler then we cause an oops.

Don't hook up the DP hpd handling if we don't have a DP port.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81856
Reported-by: Intel QA Team.
Signed-off-by: Dave Airlie <airlied@redhat.com> # v1
[ickle: Fix the error handling after a malloc failure]
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

   This pull request includes i80 interface support, module auto-loading
   ipp consolidation, and trivail fixups and cleanups.

Summary:
- Add i80 interface support. For this, we added some features to
  Exynos drm framework, which don't affect any other SoC and common
  framework because they are specific to Exynos drm.
- Add module auto-loading support. For this, sub drivers of Exynos drm
  exports their of match tables to userspace. This allows modules to be
  loaded automatically based on devicetree information
- Consolidate ipp driver. This patch just just includes cleanups and
  a littl bit refactoring codes.

If there is any problem, please kindly let me know.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (38 commits)
  drm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail
  drm/exynos: g2d: make ioctls more robust
  drm/exynos: hdmi: add null check for hdmiphy_port
  drm/exynos: control blending of mixer graphic layer 0
  drm/exynos: Add MODULE_DEVICE_TABLE entries for various components
  Subject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions"
  Subject: Revert "drm/exynos: fix module build error"
  drm/exynos/ipp: simplify ipp_find_driver
  drm/exynos/ipp: simplify ipp_create_id
  drm/exynos/ipp: remove redundant messages
  drm/exynos/ipp: simplify ipp_find_obj
  drm/exynos/ipp: remove useless registration checks
  drm/exynos/ipp: simplify memory check function
  drm/exynos/ipp: remove incorrect checks of list_first_entry result
  drm/exynos/ipp: remove temporary variable
  drm/exynos/ipp: correct address type
  drm/exynos/ipp: remove struct exynos_drm_ipp_private
  drm/exynos/ipp: remove unused field from exynos_drm_ipp_private
  drm/exynos/ipp: remove type casting
  drm/exynos: g2d: add exynos4212 as a compatible device.
  ...

Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even
if no G2D support is available. Let the ioctl fail when this is the
case, so that userspace can accurately probe for G2D support.

This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't
fail when G2D is absent, leading to a segfault later.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: INki Dae <inki.dae@samsung.com>