- 04 Oct, 2018 33 commits
-
-
Steve Longerbeam authored
Switch all media platform drivers to call v4l2_async_notifier_add_subdev() to add asd's to a notifier, in place of referencing the notifier->subdevs[] array. These drivers also must now call v4l2_async_notifier_init() before adding asd's to their notifiers. There may still be cases where a platform driver maintains a list of asd's that is a duplicate of the notifier asd_list, in which case its possible the platform driver list can be removed, and can reference the notifier asd_list instead. One example of where a duplicate list has been removed in this patch is xilinx-vipp.c. If there are such cases remaining, those drivers should be optimized to remove the duplicate platform driver asd lists. None of the changes to the platform drivers in this patch have been tested. Verify that the async subdevices needed by the platform are bound at load time, and that the driver unloads and reloads correctly with no memory leaking of asd objects. Suggested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Steve Longerbeam authored
The move to subdev notifiers fixes one assumption of OF graph parsing. If a subdevice has non-video related ports, the subdev driver knows not to follow those ports when adding remote devices to its subdev notifier. Signed-off-by:
-
Steve Longerbeam authored
Switch to v4l2_async_notifier_add_*_subdev() when adding async subdevs to the imx-media root notifier. This removes the need to check for an already added asd, since v4l2_async_notifier_add_*_subdev() does this check. Also no need to allocate a subdevs array when registering the root notifier, or keeping an internal master asd_list, since this is moved to the notifier's asd_list. Signed-off-by:
-
Steve Longerbeam authored
Rename the imx-media root async notifier from "subdev_notifier" to simply "notifier", so as not to confuse it with true subdev notifiers. No functional changes. Signed-off-by:
-
Steve Longerbeam authored
The root imx-media notifier no longer sees all bound subdevices because some of them will be bound to subdev notifiers. So imx_media_create_links() now needs to loop through all subdevices registered with the v4l2-device, not just the ones in the root notifier's done list. This should be safe because imx_media_create_of_links() checks if a fwnode link already exists before creating. Signed-off-by:
-
Steve Longerbeam authored
After moving to subdev notifiers, it's no longer necessary to recursively walk the OF graph, because the subdev notifiers will discover and add devices from the graph for us. So the recursive of_parse_subdev() function is gone, replaced with of_add_csi() which adds only the CSI port fwnodes to the imx-media root notifier. Signed-off-by:
-
Steve Longerbeam authored
Parse neighbor remote devices on the MIPI CSI-2 input port, add them to a subdev notifier, and register the subdev notifier for the MIPI CSI-2 receiver, by calling v4l2_async_register_fwnode_subdev(). csi2_parse_endpoints() is modified to be the parse_endpoint callback. Signed-off-by:
-
Steve Longerbeam authored
Parse neighbor remote devices on the CSI port, and add them to a subdev notifier, by calling v4l2_async_notifier_parse_fwnode_endpoints_by_port() using the CSI's port id. And register the subdev notifier for the CSI. Signed-off-by:
-
Steve Longerbeam authored
Parse neighbor remote devices on the video muxes input ports, add them to a subdev notifier, and register the subdev notifier for the video mux, by calling v4l2_async_register_fwnode_subdev(). Signed-off-by:
-
Steve Longerbeam authored
Adds v4l2_async_register_fwnode_subdev(), which is a convenience function for parsing a sub-device's fwnode port endpoints for connected remote sub-devices, registering a sub-device notifier, and then registering the sub-device itself. Signed-off-by:
-
Steve Longerbeam authored
The fwnode endpoint and reference parsing functions in v4l2-fwnode.c are modified to make use of v4l2_async_notifier_add_subdev(). As a result the notifier->subdevs array is no longer allocated or re-allocated, and by extension the max_subdevs value is also no longer needed. Callers of the fwnode endpoint and reference parsing functions must now first initialize the notifier with a call to v4l2_async_notifier_init(). This includes the function v4l2_async_register_subdev_sensor_common(), and the intel-ipu3, omap3isp, and rcar-vin drivers. Since the notifier->subdevs array is no longer allocated in the fwnode endpoint and reference parsing functions, the callers of those functions must never reference that array, since it is now NULL. Of the drivers that make use of the fwnode/ref parsing, only the intel-ipu3 driver references the ->subdevs[] array, (in the notifier completion callback), so that driver has been modified to iterate through the notifier->asd_list instead. Signed-off-by:
-
Steve Longerbeam authored
Add these convenience functions, which allocate an asd of match type fwnode, i2c, or device-name, of size asd_struct_size, and then adds them to the notifier asd_list. Signed-off-by:
-
Steve Longerbeam authored
v4l2_async_notifier_add_subdev() adds an asd to the notifier. It checks that no other equivalent asd's have already been added to this notifier's asd list, or to other registered notifier's waiting or done lists, and increments num_subdevs. v4l2_async_notifier_add_subdev() does not make use of the notifier subdevs array, otherwise it would have to re-allocate the array every time the function was called. In place of the subdevs array, the function adds the newly allocated asd to a new master asd_list. The function will return error with a WARN() if it is ever called with the subdevs array allocated. Drivers are now required to call a v4l2_async_notifier_init(), before the first call to v4l2_async_notifier_add_subdev(), in order to initialize the asd_list. In v4l2_async_notifier_has_async_subdev(), __v4l2_async_notifier_register(), and v4l2_async_notifier_cleanup(), maintain backward compatibility with the subdevs array, by alternatively operate on the subdevs array or a non-empty notifier->asd_list. Signed-off-by:
-
Steve Longerbeam authored
Generalize v4l2_async_notifier_fwnode_has_async_subdev() to allow searching for any type of async subdev, not just fwnodes. Rename to v4l2_async_notifier_has_async_subdev() and pass it an asd pointer. Signed-off-by:
-
Steve Longerbeam authored
Documentation/devicetree/bindings/media/video-interfaces.txt states that the 'remote-endpoint' property is optional. So v4l2_async_notifier_fwnode_parse_endpoint() should not return error if the endpoint has no remote port parent. Just ignore the endpoint, skip adding an asd to the notifier and return 0. __v4l2_async_notifier_parse_fwnode_endpoints() will then continue parsing the remaining port endpoints of the device. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Niklas Söderlund authored
Fix copy-and-paste error in comment for TXB CSI-2 transmitter power down sequence. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jacopo Mondi authored
The adv748x assumes input endpoints are always enabled, and registers a subdevice for each of them when the corresponding output subdevice is registered. Fix this by conditionally registering the input subdevice only if it is actually described in device tree. Tested-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Jacopo Mondi authored
The ADV748x has two CSI-2 output port and one TTL input/output port for digital video reception/transmission. The TTL digital pad is unconditionally enabled during the device reset even if not used. Same goes for the TXA and TXB CSI-2 outputs, which are enabled by the initial settings blob programmed into the chip. In order to improve power saving, do not enable unused output interfaces: keep TTL output disabled, as it is not used, and drop CSI-2 output enabling from the initial settings list, as they get conditionally enabled later. Tested-by:
-
Jacopo Mondi authored
As the driver is now allowed to probe with a single output endpoint, power management routines shall now take into account the case a CSI-2 TX is not enabled. Unify the adv748x_tx_power() routine to handle transparently TXA and TXB, and enable the CSI-2 outputs conditionally. Tested-by:
-
Jacopo Mondi authored
Currently the adv748x driver will fail to probe unless both of its output endpoints (TXA and TXB) are connected. Make the driver support probing provided that there is at least one input, and one output connected and protect the clean-up function from accessing un-initialized fields. Following patches will fix other uses of un-initialized TXs in the driver, such as power management functions. Tested-by:
-
Benjamin Gaignard authored
STI CEC driver has move from staging directory to media/platform/sti/cec/ Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in kernel warning message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Niklas Söderlund authored
When adding support for parallel subdev for Gen3 it was missed that the symbol 'i' in rvin_group_link_notify() was already declared, remove the dupe as it's only used as a loop variable this have no functional change. This fixes warning: rcar-core.c:117:52: originally declared here rcar-core.c:173:30: warning: symbol 'i' shadows an earlier one Fixes: 1284605d ("media: rcar-vin: Handle parallel subdev in link_notify") Signed-off-by: -
Arnd Bergmann authored
The newly added driver fails to build in some configurations due to a missing header inclusion: drivers/media/platform/imx-pxp.c:988:8: error: unknown type name 'irqreturn_t' static irqreturn_t pxp_irq_handler(int irq, void *dev_id) ^~~~~~~~~~~ drivers/media/platform/imx-pxp.c: In function 'pxp_irq_handler': drivers/media/platform/imx-pxp.c:1012:9: error: 'IRQ_HANDLED' undeclared (first use in this function); did you mean 'IRQ_MODE'? return IRQ_HANDLED; ^~~~~~~~~~~ IRQ_MODE drivers/media/platform/imx-pxp.c:1012:9: note: each undeclared identifier is reported only once for each function it appears in drivers/media/platform/imx-pxp.c: In function 'pxp_probe': drivers/media/platform/imx-pxp.c:1660:8: error: implicit declaration of function 'devm_request_threaded_irq'; did you mean 'devm_request_region'? [-Werror=implicit-function-declaration] ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, pxp_irq_handler, ^~~~~~~~~~~~~~~~~~~~~~~~~ devm_request_region drivers/media/platform/imx-pxp.c:1661:4: error: 'IRQF_ONESHOT' undeclared (first use in this function); did you mean 'SA_ONESHOT'? IRQF_ONESHOT, dev_name(&pdev->dev), dev); Fixes: 51abcf7f ("media: imx-pxp: add i.MX Pixel Pipeline driver") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Hugues Fruchet authored
Only enable IT frame on JPEG capture, this saves some CPU interruptions and processing on all the other cases. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/media/platform/pxa_camera.c:2400:17: warning: address of 'pdev->dev.of_node' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pdev->dev.of_node && !pcdev->pdata) { ~~~~~~~~~~^~~~~~~ ~~ 1 warning generated. Judging from the rest of the kernel, it seems like this was an error and just the value of of_node should be checked rather than the address. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
zhong jiang authored
We include device.h twice in camss.h. It's unnecessary. hence just remove it. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Philipp Zabel authored
The documentation in Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst tells us that the V4L2_PIX_FMT_RGB32 format is deprecated and must not be used by new drivers. Replace it with V4L2_PIX_FMT_XRGB32. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
-
Dan Carpenter authored
The load_requested_vpu() function returns a freed vpu_fw pointer. It's not used so it doesn't cause any problems, but Smatch complains about it: drivers/media/platform/mtk-vpu/mtk_vpu.c:578 vpu_load_firmware() warn: passing freed memory 'vpu_fw' We can clean up the code a bit and silence the static checker warning by not passing the parameter at all. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Verkuil authored
Clarify that when you receive V4L2_EVENT_SOURCE_CHANGE with flag V4L2_EVENT_SRC_CH_RESOLUTION set, and the new resolution appears identical to the old resolution, then you still must restart the streaming I/O. Signed-off-by:
-
Matthias Reichl authored
The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles bit 15 (0x8000) on repeated button presses, like MCE remotes. Add it's customer code 0x80460000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
This can be done with c99 initializers, which makes the code cleaner and more transparent. It does require gcc 4.6, because of this bug in earlier versions: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 Since commit cafa0010 ("Raise the minimum required gcc version to 4.6"), this is the case. Signed-off-by:
-
Sean Young authored
The rc_proto field should list the exact variant used by the remote. This does not change the decoder used, but helps with using keymaps for transmit purposes. Signed-off-by:
-
- 03 Oct, 2018 4 commits
-
-
Ricardo Ribalda Delgado authored
The loop seemed to be made to calculate max, but max is not used in that function. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Hugues Fruchet authored
Change 720p JPEG mode to mode 3 as per other resolutions. Signed-off-by:
-
Sakari Ailus authored
The V4L2 sub-device API does not support the crop default target. A number of drivers apparently still did support this, likely as it was needed by the SoC camera framework. Drop support for the default crop rectaingle in sub-device drivers, and use the bounds rectangle in SoC camera instead. Reported-by:
Helmut Grohne <h.grohne@intenta.de> Suggested-by:
-
Sakari Ailus authored
A number of sub-device drivers used a static name for the sub-device, and thus the media entity. As the entity name must be unique within a media device, this makes it impossible to have more than one instance of each device in a media device. This is a rather severe limitation. Instead of fixing these drivers, add a comment to the drivers noting that such static names may not be used in the future. The alternative of fixing the drivers is troublesome as the entity (as well as sub-device) name is part of the uAPI. Changing that is almost certain to break something. As these devices are old but no-one has encountered a problem with the static names, leave it as-is. Signed-off-by:
-
- 24 Sep, 2018 3 commits
-
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/media/platform/davinci/vpbe_display.c:524:24: warning: implicit conversion from enumeration type 'enum osd_v_exp_ratio' to different enumeration type 'enum osd_h_exp_ratio' [-Wenum-conversion] layer_info->h_exp = V_EXP_6_OVER_5; ~ ^~~~~~~~~~~~~~ 1 warning generated. This appears to be a copy and paste error judging from the couple of lines directly above this statement and the way that height is handled in the if block above this one. Reported-by: -
Nathan Chancellor authored
Clang warns when a variable is assigned to itself. drivers/media/pci/bt8xx/bttv-driver.c:2043:13: warning: explicitly assigning value of variable of type '__s32' (aka 'int') to itself [-Wself-assign] min_height = min_height; ~~~~~~~~~~ ^ ~~~~~~~~~~ 1 warning generated. There doesn't appear to be any good reason for this and this statement was added in commit e5bd0260 ("V4L/DVB (5077): Bttv cropping support") back in 2007. Just remove it. Reported-by: -
Niklas Söderlund authored
Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
