- 16 Aug, 2024 1 commit
-
-
Srinivas Kandagatla authored
we seems to have ended up with duplicate clocks for frame-sync on sm8250, it has both va and fsgen which are exactly same things. Remove the redundant va clock and make it align with other SoCs. Codec driver does not even handle va clock, so remove this from the bindings and examples to avoid any confusion. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240815165320.18836-1-srinivas.kandagatla@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 15 Aug, 2024 1 commit
-
-
Shenghao Ding authored
Remove unnecessary line feed for tasdevice_dsp_create_ctrls, and remove two unnecessary spaces in tas2563_digital_gain_get and tas2563_digital_gain_put. Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Link: https://patch.msgid.link/20240815042138.1997-1-shenghao-ding@ti.comSigned-off-by:
-
- 14 Aug, 2024 9 commits
-
-
tangbin authored
In the function loongson_pcm_trigger and loongson_pcm_open, the 'ret' is useless, so remove it to simplify code. Signed-off-by:
tangbin <tangbin@cmss.chinamobile.com> Link: https://patch.msgid.link/20240713153428.44858-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Kuninori Morimoto authored
soc-pcm.c has snd_soc_dpcm_stream_{lock/unlock}_irq() helper function, but it is almost nothing help. It just makes a code complex. Let's remove it. Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/875xsnll85.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Fabio Estevam authored
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives. The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM ifdefery from the runtime suspend/resume() functions. Signed-off-by:
Fabio Estevam <festevam@denx.de> Link: https://patch.msgid.link/20240808184944.267686-7-festevam@gmail.comSigned-off-by:
-
Fabio Estevam authored
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS() alternative. The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM_SLEEP ifdefery from the suspend/resume() functions. Signed-off-by:
-
Fabio Estevam authored
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS() alternative. The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM_SLEEP ifdefery from the suspend/resume() functions. Signed-off-by:
-
Fabio Estevam authored
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives. The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM ifdefery from the runtime suspend/resume() functions. Signed-off-by:
-
Fabio Estevam authored
Replace SET_RUNTIME_PM_OPS() with its modern RUNTIME_PM_OPS() alternative. The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM ifdefery from the runtime suspend/resume() functions. Signed-off-by:
-
Fabio Estevam authored
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives. The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM ifdefery from the runtime suspend/resume() functions. Signed-off-by:
-
Fabio Estevam authored
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives. The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the CONFIG_PM ifdefery from the runtime suspend/resume() functions. Signed-off-by:
-
- 13 Aug, 2024 5 commits
-
-
Shenghao Ding authored
Rename dai_driver name to unify the name between TAS2563 and TAS2781. Signed-off-by:
-
Vijendar Mukunda authored
Add acp pci driver and machine driver changes for ACP7.1 based platforms for legacy stack. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20240813080850.3107409-1-Vijendar.Mukunda@amd.comSigned-off-by:
-
Christophe JAILLET authored
'struct reg_sequence' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. While at it, remove rt1318_INIT_REG_LEN which is ununsed. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 22062 4859 32 26953 6949 sound/soc/codecs/rt1318.o After: ===== text data bss dec hex filename 24742 2171 32 26945 6941 sound/soc/codecs/rt1318.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/96561dd2962d4312eb0e68ab850027f44350d070.1722952334.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Vijendar Mukunda authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://patch.msgid.link/20240812100429.2594745-1-Vijendar.Mukunda@amd.comSigned-off-by:
-
Christophe JAILLET authored
'struct reg_sequence' and 'struct reg_sequences' are not modified in this drivers. Constifying these structures moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 54409 7881 64 62354 f392 sound/soc/codecs/cs43130.o After: ===== text data bss dec hex filename 55562 6729 64 62355 f393 sound/soc/codecs/cs43130.o Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
- 08 Aug, 2024 8 commits
-
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: The TI TAS drivers use some legacy GPIO code and headers, this series fixes it up. The TAS2781 is a special case since it adds a handful of lines of deviating code to reconfigure a GPIO line for IRQ mode and then never actually use the IRQ obtained in the code. Is the line used by autonomous hardware? I'm puzzled by this. Anyways the patch suggest how to solve this properly by fixing the parent irqchip and I'm happy to help.
-
Vijendar Mukunda authored
Instead of desc->rev, use acp pci revision id(pci_rev) for cache register conditional check. Signed-off-by:
-
Gustavo A. R. Silva authored
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Move the conflicting declaration to the end of the structure. Notice that `struct snd_sof_pcm` ends in a flexible-array member through `struct snd_soc_tplg_pcm` -> `struct snd_soc_tplg_private`. Whith this, fix the following warnings: sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] ./include/trace/events/../../../sound/soc/sof/sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] sound/soc/amd/../sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] sound/soc/sof/amd/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] sound/soc/sof/intel/../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] sound/soc/sof/mediatek/mt8186/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] sound/soc/sof/mediatek/mt8195/../../sof-audio.h:350:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/ZrDvt6eyeFyajq6l@cuteSigned-off-by:
-
Vijendar Mukunda authored
Add ZSC Control register programming sequence for ACP D0 and D3 state transitions for ACP7.0 onwards. This will allow ACP to enter low power state when ACP enters D3 state. When ACP enters D0 State, ZSC control should be disabled. Tested-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Vijendar Mukunda authored
As module device table added for AMD SoundWire machine driver MODULE_ALIAS is not required. Remove MODULE_ALIAS for AMD SoundWire machine driver. Signed-off-by:
-
Zhang Yi authored
We found an input issue after initiation.So we added the default input source at initiation. Signed-off-by:
Zhang Yi <zhangyi@everest-semi.com> Link: https://patch.msgid.link/20240807025356.24904-3-zhangyi@everest-semi.comSigned-off-by:
-
Simon Trimmer authored
Now that regmap_read_bypassed() has been added to the kernel it is preferable to wake the device with a read rather than a write as the utility function can be called at a time before the device has been identified. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Link: https://patch.msgid.link/20240807142715.47077-1-simont@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
So we can apply AMD patches that rely on them.
-
- 07 Aug, 2024 3 commits
-
-
Linus Walleij authored
These drivers all use <linux/gpio/consumer.h> and has no business including the legacy headers <linux/gpio.h> or <linux/of_gpio.h>. Drop the surplus includes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-3-bd0f2705d58b@linaro.orgSigned-off-by:
-
Linus Walleij authored
The code is obtaining a GPIO reset using the reset GPIO name "reset-gpios", but the gpiolib is already adding the suffix "-gpios" to anything passed to this function and will be looking for "reset-gpios-gpios" which is most certainly not what the author desired. Fix it up. Fixes: ef3bcde7 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by:
-
Linus Walleij authored
The tas2781-i2c driver gets an IRQ from either ACPI or device tree, then proceeds to check if the IRQ has a corresponding GPIO and in case it does enforce the GPIO as input and set a label on it. This is abuse of the API: - First we cannot guarantee that the numberspaces of the GPIOs and the IRQs are the same, i.e that an IRQ number corresponds to a GPIO number like that. - Second, GPIO chips and IRQ chips should be treated as orthogonal APIs, the irqchip needs to ascertain that the backing GPIO line is set to input etc just using the irqchip. - Third it is using the legacy <linux/gpio.h> API which should not be used in new code yet this was added just a year ago. Delete the offending code. If this creates problems the GPIO and irqchip maintainers can help to fix the issues. It *should* not create any problems, because the irq isn't used anywhere in the driver, it's just obtained and then left unused. Fixes: ef3bcde7 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by:
-
- 06 Aug, 2024 2 commits
-
-
Kuninori Morimoto authored
Bespoke trigger support was added when Linux v3.5 by this patch. commit 07bf84aa ("ASoC: dpcm: Add bespoke trigger()") test-component driver is using it, but this is because it indicates used function for debug/trace purpose. Except test-component driver, bespoke trigger has never been used over 10 years in upstream. We can re-support it if needed in the future, but let's remove it for now, because it just noise in upstream. Signed-off-by:
-
Mark Brown authored
Merge series from Simon Trimmer <simont@opensource.cirrus.com>: This pair of patches extend wm_adsp to add a callback that can be used to control whether ALSA controls are added and then tweak cs35l56 to use it to suppress controls made from firmware coefficients.
-
- 05 Aug, 2024 5 commits
-
-
Richard Fitzgerald authored
Use the late-read buffer in the CS35L56 SoundWire interface to read OTP memory. The OTP memory has a longer access latency than chip registers and cannot guarantee to return the data value in the SoundWire control response if the bus clock is >4.8 MHz. The Cirrus SoundWire peripheral IP exposes the bridge-to-bus read buffer and status bits. For a read from OTP the bridge status bits are polled to wait for the OTP data to be loaded into the read buffer and the data is then read from there. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e1830f66 ("ASoC: cs35l56: Add helper functions for amp calibration") Link: https://patch.msgid.link/20240805140839.26042-1-rf@opensource.cirrus.comSigned-off-by:
-
Johan Hovold authored
Recent changes that started checking the codec version broke audio on the Lenovo ThinkPad X13s: wsa_macro 3240000.codec: Unsupported Codec version (0) wsa_macro 3240000.codec: probe with driver wsa_macro failed with error -22 rx_macro 3200000.rxmacro: Unsupported Codec version (0) rx_macro 3200000.rxmacro: probe with driver rx_macro failed with error -22 Add the missing codec version to the lookup table so that the codec drivers probe successfully. Note that I'm just assuming that this is a 2.0 codec based on the fact that this device uses the older register layout. Fixes: 378918d5 ("ASoC: codecs: lpass-macro: add helpers to get codec version") Fixes: dbacef05 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions") Fixes: 727de4fb ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version") Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
-
Richard Fitzgerald authored
Call efi_rt_services_supported() to check that efi.get_variable exists before calling it. Signed-off-by:
-
Simon Trimmer authored
A number of laptops have gone to market with old firmware versions that export controls that have since been hidden, but we can't just install a newer firmware because the firmware for each product is customized and qualified by the OEM. The issue is that alsactl save and restore has no idea what controls are good to persist which can lead to misconfiguration. There is no reason that the UCM or user should need to interact with any of the ALSA controls for the firmware coefficients so they can be removed entirely. Fixes: e4961125 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Signed-off-by:
-
Simon Trimmer authored
The callback allows codec drivers to affect how firmware coefficients are added as controls. For example a codec driver may selectively add controls by choosing to call wm_adsp_control_add() based on some filter logic. Signed-off-by:
-
- 02 Aug, 2024 6 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Add initial support for the PantherLake platform, and initial ACPI configurations.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: pahole reports a number of sub-optimal structure definitions with holes and cache-line alignment problems, this patchset optimizes a couple of structure frequently used. No functionality change, only re-ordering of structure members.
-
Christophe JAILLET authored
In order to constify `snd_soc_component_driver` struct, duplicate `soc_component_dev_cs43130` into a `soc_component_dev_cs43130_digital` and `soc_component_dev_cs43130_analog`. These 2 new structures share the same .dapm_widgets and .dapm_routes arrays but differ for .num_dapm_widgets and .num_dapm_routes. In the digital case, the last entries are not taken into account. Doing so has several advantages: - `snd_soc_component_driver` can be declared as const to move their declarations to read-only sections. - code in the probe is simpler. There is no need to concatenate some arrays to handle the "analog" case - this saves some memory because all_hp_widgets and analog_hp_routes can be removed. Before : ====== text data bss dec hex filename 53965 8265 4512 66742 104b6 sound/soc/codecs/cs43130.o After : ===== text data bss dec hex filename 54409 7881 64 62354 f392 sound/soc/codecs/cs43130.o Signed-off-by: -
Yue Haibing authored
These symbols are not used outside of the files, make them static to fix sparse warnings: sound/soc/fsl/lpc3xxx-i2s.c:261:30: warning: symbol 'lpc3xxx_i2s_dai_ops' was not declared. Should it be static? sound/soc/fsl/lpc3xxx-i2s.c:271:27: warning: symbol 'lpc3xxx_i2s_dai_driver' was not declared. Should it be static? sound/soc/fsl/lpc3xxx-pcm.c:55:39: warning: symbol 'lpc3xxx_soc_platform_driver' was not declared. Should it be static? Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Link: https://patch.msgid.link/20240802101044.3302251-1-yuehaibing@huawei.comSigned-off-by:
-
Christophe JAILLET authored
In order to constify `snd_soc_component_driver` struct, simplify the logic and the `sti_sas_dev_data` struct. Since commit 165a57a3 ("ASoC: sti-sas: clean legacy in sti-sas") only only chip is supported and `sti_sas_driver` can be fully defined at compilation time. Before: ====== text data bss dec hex filename 8033 1547 16 9596 257c sound/soc/codecs/sti-sas.o After: ===== text data bss dec hex filename 8257 1163 16 9436 24dc sound/soc/codecs/sti-sas.o Signed-off-by:
-
Shenghao Ding authored
ASoC: tas2781: Fix a compiling warning reported by robot kernel test due to adding tas2563_dvc_table Move tas2563_dvc_table into a separate Header file, as only tas2781 codec driver use this table, and hda side codec driver won't use it. Fixes: 75ed63a5 ("ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume") Signed-off-by:
-
