This patch drops tracking of internal latencies, it's possible to derive
these times via kernel tracepoints and some user-space scripting. Since
there's no other use of the internal timestamp than the loopback driver we
remove the connection.c, connection.h, es1.c, es2.c and loopback.c
inter-dependency in one go.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The Qualcomm kernel builds with -Werror so the existing es2.c driver
breaks the build due to unused static functions.  As we are still
hashing out exactly how to implement this logic at the moment, just
comment out the functions to make the build be clean, no logic changes
happen here at all.
Reported-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch hooks tracepoints for greybus messages

- trace_gb_message_send
- trace_gb_message_recv_request
- trace_gb_message_recv_response
- trace_gb_message_cancel_outgoing
- trace_gb_message_cancel_incoming

It provides standard tracepoints at

/sys/kernel/debug/tracing/events/greybus/gb_message_send
/sys/kernel/debug/tracing/events/greybus/gb_message_recv_response
/sys/kernel/debug/tracing/events/greybus/gb_message_recv_request
/sys/kernel/debug/tracing/events/greybus/gb_message_cancel_outgoing
/sys/kernel/debug/tracing/events/greybus/gb_message_cancel_incoming

Giving outputs like

gb_message_recv_request: greybus:1-1.1:0 op=0001 if_id=0000 hd_id=0000 l=2
gb_message_send: greybus:1-1.1:0 op=0001 if_id=0000 hd_id=0000 l=2

Similarly perf events can be viewed with standard perf tools e.g.

root@beaglebone:~# perf list 'greybus:*'
  greybus:gb_message_send                            [Tracepoint event]
  greybus:gb_message_recv_request                    [Tracepoint event]
  greybus:gb_message_recv_response                   [Tracepoint event]
  greybus:gb_message_cancel_outgoing                 [Tracepoint event]
  greybus:gb_message_cancel_incoming                 [Tracepoint event]
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds greybus_trace.h with the following trace definitions

- trace_gb_message_send
- trace_gb_message_recv_request
- trace_gb_message_recv_response
- trace_gb_message_cancel_incoming
- trace_gb_message_cancel_outgoing
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The file names here weren't in sync with what we have today and the
updates give a better picture of the same.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These host-driver callbacks were intended to allow host drivers to
prepare a cport, something which can now be handled by the cport
enable/disable callbacks instead.

The current create/destroy are somewhat confusingly named as they were
not supposed to create or destroy connections. They were however called
from the unrelated helper functions that do create and destroy SVC
connections.

Furthermore, no errors were returned should the create callback fail,
which should have caused the connection initialisation to fail.

Remove these unused callbacks for now, and let us use the cport
enable/disable callbacks that should be able handle all host cport
initialisation (possibly after also adding an interface to provide
information for endpoint-cport mapping).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add optional cport enable and disable callbacks to the greybus host
drivers, that can be used to initialise and allocate/release resources
associated with a cport during connection setup/teardown (e.g. software
queues and hardware state).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add protocol-version to improve readability.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add control-connected helper to improve readability.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Rename helper to the more descriptive
gb_connection_control_disconnected().

Use u16 for cport number, remove redundant cport number from warning
message, and shorten a long line.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Clearly mark error-path labels as such and clean up control flow.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Move SVC-connection creation to its own helper.

Note that the connection_create host-driver callback is really
unrelated to the SVC connection, and will be removed by a later patch.
It is is included for now as the connection_destroy callback is
currently made from the SVC-connection-destroy helper.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The SVC Control request is obsolete and not used anymore. Remove the related
define.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some fields in svc request were not being set with the correct
endianness, which will trigger the following sparse issues as example:

greybus/svc.c:116:22: warning: incorrect type in assignment (different base types)
greybus/svc.c:116:22:    expected unsigned short [unsigned] [assigned] [usertype] attr
greybus/svc.c:116:22:    got restricted __le16 [usertype] <noident>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add the missing version-request definition that was falsely claimed to
be empty.

Update the generic version-request helper and SVC version-request
handler to use the request definition rather than rely on the response
happening to have the same layout, something which also improves
readability.

Remove a misplaced "Control Protocol" header while at it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The SVC-protocol driver currently accepts the version offered by the
SVC, but still responded with a hard-coded version.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The device-id map was never deallocated on SVC-connection tear down.

Also make the map per-SVC-connection (there should still be only one)
rather than use a global pointer.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Endpoints pair will only be managed by es2 driver.
map_cport_to_ep() and unmap_cport() should be static.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Some methods and variables name were a lot confusing.
Replace it or add ep_pair in methods or varaibles name
to make sources less confusing.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A single global work-queue pointer was used for the per-connection
workqueue, something which would lead to memory leaks and all sorts of
bad things if there are ever more than one SDIO connection in a system.

Also add the missing error handling when allocating the queue.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The mmc-driver private data must not be accessed after mmc_free_host()
has released it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Do not release the minor number until after the device has been
deregistered.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Module's Bootrom needs a way to know (currently), when to start sending
requests to the AP. The version request is sent before connection_init()
routine is called, and if the module sends the request right after
receiving version request, the connection->private field will be NULL.

Fix this TEMPORARILY by sending an AP_READY request.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

That's how the bootrom-tool names it, and that's how the kernel should
expect it.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

All the id-fields are 32 bit long instead of 16 bits and so we will need
8 characters per field instead of four. Also the stage field is only one
byte long and so needs just two characters to represent it.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

28 is the wrong value and should be 32 instead.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These are required to get/set DME attributes of the modules. This is
implemented based on the greybus specifications.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

dev_name() will give a nice string representing the end0:X:Y:Z:W name
mitigating the need to pick apart the various nested data structures and
print out their various identifiers.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In order to extract timestamps from gb_message instead of gb_connection we
will need access to the gb_operation structure. A first step to that is to
create our own gb_loopback_operation_sync which will call
gb_operation_request_send_sync() directly. Once loopback is using this
function internally it will be possible to convert to gb_message based
timestamps and drop gb_connection based timestamps in two seperate patches.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In user-space we specify a list of connections as a bit-mask with the
assumption that a list such is indexed as indicated below.

end0:3:3:1:1 = 1
end0:3:3:2:3 = 2
end0:3:3:3:4 = 4

Current code assigns bitmask ids based on the order of discovery, however
user-space has no idea what the order of discovery is. This patch sorts the
linked list of connections associated with the loopback driver and assigns
a bit-id based on the sorted list - not the order of discovery. This
change therefore enforces the end-users idea that end0:3:3:1:1 above is
always denoted by bit 1 - even if from the AP's perspective it was the last
entry discovered.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds a len field to the loopback protocol.
This field is validated in gb_loopback_transfer() and stuffed in
gb_loopback_request_recv().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch fixes and invalid use of pr_info() in favour of dev_err();
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

bdd4bba4 ('greybus/loopback: add module level sys/debug fs data points')
added a sysfs entry attached to gb_dev but missed the jump to out_sysfs_dev
This patchs fixes the missing jump to out_sysfs_dev.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

bdd4bba4 ('greybus/loopback: add module level sys/debug fs data points')
added a debugfs entry attached to gb_dev but omitted the cleanup on gb_init
error and gb_exit. This patchs fixes the missing debugfs_remove().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

init doesn't have a lock for kzalloc so exit shouldn't have lock with the
corresponding kfree.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch holds gb_dev.mutex for the duration of init and exit to reduce
complexity while ensuring that init and exit run atomically with respect
to slave threads @ gb_loopback_fn().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patches fixes a case where gb_dev.count is decremented too late in the
exit() routine.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its a very useful piece of information, i.e. the cport id of the AP to
which the cport of the module is connected, and is required lots of
times. It isn't known in advance as it is allocated at runtime.

This patch creates another file 'ap_cport_id', only for the connection
directories, which will give the cport id of the AP.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We created two-way routes between the AP and module's interface on
hotplug, and forgot to remove them on hot-unplug. The same is also
required while handling errors in hotplug case.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>