- 12 Mar, 2009 5 commits
-
-
Randy Dunlap authored
Fix scsi_debug build error: drivers/built-in.o: In function `resp_read': scsi_debug.c:(.text+0x21379a): undefined reference to `crc_t10dif' drivers/built-in.o: In function `resp_write': scsi_debug.c:(.text+0x213fca): undefined reference to `crc_t10dif' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Martin K. Petersen authored
This patch adds support for DIX and DIF in scsi_debug. A separate buffer is allocated for the protection information. - The dix parameter indicates whether the controller supports DIX (protection information DMA) - The dif parameter indicates whether the simulated storage device supports DIF - The guard parameter switches between T10 CRC(0) and IP checksum(1) - The ato parameter indicates whether the application tag is owned by the disk(0) or the OS(1) - DIF and DIX errors can be triggered using the scsi_debug_opts mask Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Randy Dunlap authored
Warning(linux-2.6.28-git13//drivers/scsi/scsi_sysfs.c:1049): Excess function parameter 'dev' description in 'scsi_sysfs_add_host' Signed-off-by:
-
Matthew Wilcox authored
SES had its own code to retrieve VPD from devices; convert it to use the new scsi_get_vpd_page helper. Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Matthew Wilcox authored
Based on prior work by Martin Petersen and James Bottomley, this patch adds a generic helper for retrieving VPD pages from SCSI devices. Signed-off-by:
-
- 10 Mar, 2009 17 commits
-
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
The value is already pre-assigned prior to the qla2x00_mem_alloc(). Signed-off-by:
-
Andrew Vasquez authored
QLA_* return codes are 'int' in size. There were still several legacy check-points which assumed a return-code width of 8-bits. This could cause incorrect assumptions of 'good' status if a return of QLA_FUNCTION_TIMEOUT. Signed-off-by:
-
Anirban Chakraborty authored
Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
-
Lalit Chandivade authored
Use minimum value for max vport during firmware initialization in LOOP topology. Using max vport value from get resource count in LOOP topology causes firmware initialization failure. Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Robert Love authored
This change makes the fcoe Rx threads have the same nice value as lpfc and qla2xxx Rx threads. Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Chris Leech authored
In fcoe_check_wait_queue() the queue length could temporarily drop to 0, before the last frame was successfully sent. This resulted in out of order data frames within a single sequence, leading to IO timeout errors. This builds on the approach from Vasu Dev to only fix the queue management in fcoe_check_wait_queue, where my first patch added locking to the transmit path even when the pending queue was not in use. This patch continues to use fcoe_pending_queue.qlen instead of introducing a new length counter, but takes precautions to ensure it never drops to 0 before the final frame in the queue has successfully been passed to the netdev qdisc layer. It also includes some cleanup of fcoe_check_wait_queue and removes the fcoe_insert_wait_queue(_head) wrapper functions. Signed-off-by:
Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Vasu Dev authored
frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
Roel Kluin authored
Use kfree_skb instead of kfree for struct sk_buff pointers. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Yi Zou authored
Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
-
Yi Zou authored
We shouldn't be altering inbound frames. Signed-off-by:
-
Robert Love authored
The registration function shouldn't initialize the mutex or list head. The fcoe SW transport should initialize itself before registering. Signed-off-by:
-
Robert Love authored
Use helper functions for watchdog timer setup. Signed-off-by:
-
Robert Love authored
Comment from "Andrew Morton <akpm@linux-foundation.org>" > +{ > + return (struct fcoe_softc *)lport_priv(lp); unneeded/undesirable cast of void*. There are probably zillions of instances of this - there always are. This whole inline function was unnecessary. The FCoE layer knows that it's data structure is stored in the lport private data, it can just access it from lport_priv(). Signed-off-by: -
Robert Love authored
1) There were a few functions with a strange layout, i.e. all arguments on the second line, when not necessary. Where ever possible I moved the return value to the same line as the function name. However, when the line was too long to have a single argument on the same line I moved the return value to above line. For example: <short return> <function name>(<arg 1>, <arg2>) and <very long return value> <function name>(<arg1>, <arg2>) 2) Removed one extra whitespace line 3) Fixed two typos Signed-off-by:
-
Robert Love authored
1) Added '()' for function names in kerneldoc comments 2) Changed comment bookends from '**/' to '*/'. The comment on the the mailing list was that '**/' "is consistently unconventional. Not wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt states that kerneldoc comment blocks should end with '**/' but most (if not all) instance I found under drivers/scsi/ were only using the '*/' so I converted to that style. 3) Removed incorrect linebreaks in kerneldoc comments where found 4) Removed a few unnecessary blank comment lines in kerneldoc comment blocks Signed-off-by:
-
- 06 Mar, 2009 13 commits
-
-
Robert Love authored
Made the comments more like the comments for struct scsi_host_template. Signed-off-by:
-
Robert Love authored
If we've just created an interface and the an rport is logging in we may have a request on the wire (say PRLI). If we destroy the interface, we'll go through each rport on the disc->rports list and set each rport's state to NONE. Then the lport will reset the EM. The EM reset will send a CLOSED event to the prli_resp() handler which will notice that the state != PRLI. In this case it frees the frame pointer, decrements the refcount and unlocks the rport. The problem is that there isn't a frame in this case. It's just a pointer with an embedded error code. The free causes an Oops. This patch moves the error checking to be before the state checking. Signed-off-by:
-
Robert Love authored
Just rename the variable as per our naming convention. Signed-off-by:
-
Robert Love authored
We only need to use this macro when assigning a value to rport->dd_data. All other accesses should just use dd_data. Signed-off-by:
-
Robert Love authored
Signed-off-by:
-
Steve Ma authored
When a sequence cannot be delivered to the target, the local port will schedule retries, While this process is in progress, if we destroy the FCoE interface, the fcoe_sw_destroy routine is entered, and the fc_exch_mgr_free(lp->emp) is called. Thus if fc_exch_alloc() is called when retrying the sequence, the mempool_alloc() will fail to allocate the exchange because the mempool of the exchange manager has already been released. This patch is to cancel any pending retry work of the local port before we start to destroy the interface. Also, when resetting the local port, we should also stop the scheduled pending retries. Signed-off-by:
Steve Ma <steve.ma@intel.com> Signed-off-by:
-
Vasu Dev authored
The fc_fcp_complete_locked detected data underrun in this case and set the FC_DATA_UNDRUN but that was ignored by fc_io_compl for all cases including read underrun. Added code to not to ignore FC_DATA_UNDRUN for read IO and instead suggested scsi-ml to retry cmd to recover from lost data frame. Not sure if it is okay to ignore FC_DATA_UNDRUN for other case, so let code as is for other cases but removed or-ing with zero valued fsp->cdb_status for those cases. Signed-off-by:
-
Chris Leech authored
This allows any rport ELS to retry on LS_RJT. The rport error handling would only retry on resource allocation failures and exchange timeouts. I have a target that will occasionally reject PLOGI when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would fail silently leaving the rport in a dead state. The retry count and delay are managed by fc_rport_error_retry. If the retry count is exceeded fc_rport_error will be called. When retrying is not the correct course of action, fc_rport_error can be called directly. Signed-off-by:
-
Vasu Dev authored
The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by:
-
Vasu Dev authored
The fc_seq_start_next grabs ep->ex_lock but this lock was already held here, so instead called fc_seq_start_next_locked to avoid soft lockup. Signed-off-by:
-
Vasu Dev authored
Cleanup exchange held due to RRQ when RRQ exch times out, in this case the ABTS is already done causing RRQ req therefore proceeding with cleanup in fc_exch_rrq_resp should be okay to restore exch resource. Signed-off-by:
-
Abhijeet Joglekar authored
When a rport goes away, libFC does a plogi which will reset exchanges at the rport. Clean exchanges at our end, both in transport and libFC. If transport hooks into exch_mgr_reset, it will call back into fc_exch_mgr_reset() to clean up libFC exchanges. Signed-off-by:Abhijeet Joglekar <abjoglek@cisco.com> Signed-off-by:
-
Abhijeet Joglekar authored
fc_exch_mgr structure is private to fc_exch.c. To export exch_mgr_reset to transport, transport needs access to the exch manager. Change exch_mgr_reset to use lport param which is the shared structure between libFC and transport. Alternatively, fc_exch_mgr definition can be moved to libfc.h so that lport can be accessed from mp*. Signed-off-by:
-
- 05 Mar, 2009 1 commit
-
-
Matthew Wilcox authored
We currently try to spin up drives connected to standby and unavailable ports. This will never succeed and wastes a lot of time. Fail quickly if the sense data reports the port is in standby or unavailable state. Reported-by:
Narayanan Rengarajan <narayanan.rengarajan@hp.com> Tested-by:
-
- 04 Mar, 2009 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Run sbc610 USB fixup code only on the appropriate platform.
-
Helge Bahmann authored
[airlied: you shall not retype patches from other trees half asleep] Signed-of-by:Dave Airlie <airlied@redhat.com>
-
Tony Breeds authored
commit a969e76a (powerpc: Correct USB support for GE Fanuc SBC610) introduced a fixup for NEC usb controllers. This fixup should only run on GEF SBC610 boards. Fixes Fedora bug #486511. (https://bugzilla.redhat.com/show_bug.cgi?id=486511) Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Linus Torvalds authored
-
