- 23 Feb, 2015 11 commits
-
-
Damien Lespiau authored
Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
Nick Hoath <nicholas.hoath@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Vijay Purushothaman authored
As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz Signed-off-by:
Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Vijay Purushothaman authored
Added new PHY register definitions to control TDC buffer calibration and digital lock threshold. Signed-off-by:
-
Chris Wilson authored
Currently, the command parser tries to create a secondary batch exactly as large as the original, and vmap both. This is open to abuse by userspace using extremely large batch objects, but only executing very short batches. For example, this would be if userspace were to implement a command submission ringbuffer. However, we only need to allocate pages for just the contents of the command sequence in the batch - all relocations copied to the secondary batch will reference the original batch and so there can be no access to the secondary batch outside of the explicit execution region. Testcase: igt/gem_exec_big #ivb,byt,hsw Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88308Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Dave Gordon authored
When querying the GTFIFOCTL register to check the FIFO space, the read value must be masked. The operation is repeated explicitly in several places. This change refactors the read-and-mask code into a function call. v2: rebased on top of Mika's forcewake patch set, specifically: [PATCH 8/8] drm/i915: Enum forcewake domains and domain identifiers Change-Id: Id1a9f3785cb20b82d4caa330c37b31e4e384a3ef Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Daniel Vetter authored
KMS drivers are in full control of their irq and vblank handling, if they get a vblank interrupt before drm_vblank_init or after drm_vblank_cleanup that's just a driver bug. For ums driver there's only r128 and radeon which support vblank, and they call drm_vblank_init in their driver load functions. Which again means that userspace can do whatever it wants with interrupt, vblank structures will always be there. So this should never happen, let's catch driver issues with a WARN_ON. Motivated by some discussions with Imre. v2: Use WARN_ON_ONCE as suggested by Imre. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
The pipe might already have been shut down, and then it's not a good idea to call hw accessor functions. Instead use the same logic as drm_vblank_off which has all the necessary checks to avoid troubles or inconsistency. Noticed by Imre while reviewing my patches to remove some sanity checks from ->get_vblank_counter. v2: Try harder. disable_and_save can still access the vblank stuff when vblank->enabled isn't set. It has to, since vlbank irq could be disable but the pipe is still on when being called from drm_vblank_off. But we still want to use that code for more code sharing. So add a check for vblank->enabled on top - if that's not set we shouldn't have anyone waiting for the vblank. If we have that's a pretty serious bug. The other issue that Imre spotted is drm_vblank_cleanup. That code again calls disable_and_save and so suffers from the same issues. But really drm_irq_uninstall should have cleaned that all up, so replace the code with WARN_ON. Note that we can't delete the timer cleanup since drivers aren't required to use drm_irq_install/uninstall, but can do their own irq handling. v3: Make it clear that all that gunk in drm_irq_uninstall is really just bandaids for UMS races between the irq/vblank code. In UMS userspace is in control of enabling/disabling interrupts in general and vblanks specifically. v4: Imre observed that KMS drivers all call drm_vblank_cleanup before drm_irq_uninstall (as they should), so again the code in there is dead for KMS (due to dev->num_crtcs == 0 after drm_vblank_cleanup). Or should be, so only WARN for KMS - with UMS userspace could try to do evil things. v5: After more discussion on irc we've gone back to v3: the del_timer_sync is required in all cases in drm_vblank_cleanup, but let's restrict the WARN_ON to kms drivers only. Imre was also concerned that bad things could happen without the disable_and_save call. But we immediately free vblank structures afterwards which makes the save useless. And drm_handle_vblank has a check for dev->num_crtcs to avoid surprises with ums. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Daniel Vetter authored
Where possible right now. Just a small step towards nirvana ... v2: git add. Uggh. Noticed by Imre. Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Daniel Vetter authored
UMS is no more! Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Daniel Vetter authored
With Ville's rework to use drm_crtc_vblank_on/off the core will take care of rejecting drm_vblank_get calls when the pipe is off. Also the core won't call the get_vblank_counter hooks in that case either. And since we've dropped ums support recently we can now remove these hacks, yay! Noticed while trying to answer questions Laurent had about how the new atomic helpers work. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Daniel Vetter authored
At driver load we need to tell the vblank code about the state of the pipes, so that the logic around reject vblank_get when the pipe is off works correctly. Thus far i915 used drm_vblank_off, but one of the side-effects of it is that it also saves the vblank counter. And for that it calls down into the ->get_vblank_counter hook. Which isn't really a good idea when the pipe is off for a few reasons: - With runtime pm the register might not respond. - If the pipe is off some datastructures might not be around or unitialized. The later is what blew up on gen3: We look at intel_crtc->config to compute the vblank counter, and for a disabled pipe at boot-up that's just not there. Thus far this was papered over by a check for intel_crtc->active, but I want to get rid of that (since it's fairly race, vblank hooks are called from all kinds of places). So prep for that by adding a _reset functions which only does what we really need to be done at driver load: Mark the vblank pipe as off, but don't do any vblank counter saving or event flushing - neither of that is required. v2: Clarify the code flow slightly as suggested by Ville. v3: Fix kerneldoc spelling, spotted by Laurent. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> (v2) Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 13 Feb, 2015 29 commits
-
-
Daniel Vetter authored
Signed-off-by: -
Andreas Ruprecht authored
Commit 03dae59c ("drm/i915: Ditch UMS config option") removed CONFIG_DRM_I915_UMS from the Kconfig file, but i915_drv.c still references this option in two #ifndef statements. As an undefined config option will always be 'false', we can drop the #ifndefs alltogether and adapt the printed error message. This inconsistency was found with the undertaker tool. Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> [danvet: Undo logging change as requested by Jani.] Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Damien Lespiau authored
I have no idea how that crept in, but we need to do the write from the ring and this is a masked register. Two fixes in 1! Cc: Nick Hoath <nicholas.hoath@intel.com> Signed-off-by:
-
Damien Lespiau authored
It's always a good idea to keep static analysis happy (also because it prompts doing the check like I proposed :), this time smatch complains: drivers/gpu/drm/i915/intel_ringbuffer.c:891 gen9_init_workarounds() warn: always true condition '((->dev->pdev->revision) >= (0)) => (0-255 >= 0)' That's because revision is a u8. Tweak a bit the condition then. Cc: Nick Hoath <nicholas.hoath@intel.com> Signed-off-by:
-
Damien Lespiau authored
This W/A is put in a gen9 specific function because it may well be needed on other gen9 platforms. Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Mika Kuoppala authored
We use the pid of the process which opened our device when we track which was the culprit of the gpu hang. But as that file descriptor might get inherited, we might blame the wrong process when we record the error state. Track process identifiers in requests to always find the correct offender. v2: Track only user processes (Chris) Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
This function will host SKL-only W/As. Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Let's also take the opportunity the remove the comment telling it's a pre-prod W/A, it should be obvious from the stepping test. Signed-off-by:
-
Damien Lespiau authored
We'll gather cross-gen9 W/A in a separate function later. Signed-off-by:
-
Damien Lespiau authored
WaDisableAsyncFlipPerfMode isn't listed for SKL and INSTPM_FORCE_ORDERING is MBZ so let's make a gen9 specific render init function. Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Damien Lespiau authored
At the moment we compare the whole EDRAM_PRESENT/EDRAMCAP register value to 1 while EDRAM_PRESENT is only bit 0 (the rest may be used to describe eDRAM capabilities). To be more future proof, only look at bit 0 to detect eDRAM presence. Signed-off-by:
-
Damien Lespiau authored
The last (only?) user of this was removed in: commit 2208d655 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Nov 14 09:25:29 2014 +0100 drm/i915: drop WaSetupGtModeTdRowDispatch:snb Signed-off-by:
-
Damien Lespiau authored
This function is not used outside of intel_display.c since; commit cf4c7c12 Author: Matt Roper <matthew.d.roper@intel.com> Date: Thu Dec 4 10:27:42 2014 -0800 drm/i915: Make all plane disables use 'update_plane' (v5) Signed-off-by:
-
Damien Lespiau authored
This was introduced in: commit 0bc12bcb Author: Rodrigo Vivi <rodrigo.vivi@intel.com> Date: Fri Nov 14 08:52:28 2014 -0800 drm/i915: Introduce intel_psr.c But the unpack function is unused at this date. Signed-off-by:
-
Damien Lespiau authored
This function is only used in intel_dp.c since: commit 0e32b39c Author: Dave Airlie <airlied@redhat.com> Date: Fri May 2 14:02:48 2014 +1000 drm/i915: add DP 1.2 MST support (v0.7) Signed-off-by:
-
Damien Lespiau authored
This function is only used in intel_lrc.c, so restrict it to that file. The function was moved around to avoid a forward declaration and group it with its user. Signed-off-by:
-
Damien Lespiau authored
This function is only used in intel_lrc.c, so restrict it to that file. The function was moved around to avoid a forward declaration and group it with its user. Signed-off-by:
-
Damien Lespiau authored
This header has been unusued since: commit 063c86f6 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Jan 16 14:27:27 2015 +0200 drm/i915/dsi: remove intel_dsi_cmd.c and the unused functions therein Signed-off-by:
-
Damien Lespiau authored
This function is only used in intel_ringbuffer.c, so restrict it to that file. The function was moved around to avoid a forward declaration and group it with its user. Signed-off-by:
-
