1. 16 Feb, 2016 4 commits
    • Sergei Shtylyov's avatar
      ravb: kill duplicate setting of CCC.CSEL · d0c5f45a
      Sergei Shtylyov authored
      When  adding support for the  R-Car gen3 gPTP active in configuration mode,
      the code setting the CCC.CSEL field  was duplicated due to an oversight.
      For R-Car gen 2 it's just redundant  and for R-Car gen3 the write at this
      time is probably  ignored due to CCC.GAC bit being already  set...
      
      Fixes: f5d7837f ("ravb: ptp: Add CONFIG mode support")
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d0c5f45a
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · dba36b38
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contain a rather large batch for your net that
      includes accumulated bugfixes, they are:
      
      1) Run conntrack cleanup from workqueue process context to avoid hitting
         soft lockup via watchdog for large tables. This is required by the
         IPv6 masquerading extension. From Florian Westphal.
      
      2) Use original skbuff from nfnetlink batch when calling netlink_ack()
         on error since this needs to access the skb->sk pointer.
      
      3) Incremental fix on top of recent Sasha Levin's lock fix for conntrack
         resizing.
      
      4) Fix several problems in nfnetlink batch message header sanitization
         and error handling, from Phil Turnbull.
      
      5) Select NF_DUP_IPV6 based on CONFIG_IPV6, from Arnd Bergmann.
      
      6) Fix wrong signess in return values on nf_tables counter expression,
         from Anton Protopopov.
      
      Due to the NetDev 1.1 organization burden, I had no chance to pass up
      this to you any sooner in this release cycle, sorry about that.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dba36b38
    • Rainer Weikusat's avatar
      af_unix: Guard against other == sk in unix_dgram_sendmsg · a5527dda
      Rainer Weikusat authored
      The unix_dgram_sendmsg routine use the following test
      
      if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) {
      
      to determine if sk and other are in an n:1 association (either
      established via connect or by using sendto to send messages to an
      unrelated socket identified by address). This isn't correct as the
      specified address could have been bound to the sending socket itself or
      because this socket could have been connected to itself by the time of
      the unix_peer_get but disconnected before the unix_state_lock(other). In
      both cases, the if-block would be entered despite other == sk which
      might either block the sender unintentionally or lead to trying to unlock
      the same spin lock twice for a non-blocking send. Add a other != sk
      check to guard against this.
      
      Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue")
      Reported-By: default avatarPhilipp Hahn <pmhahn@pmhahn.de>
      Signed-off-by: default avatarRainer Weikusat <rweikusat@mobileactivedefense.com>
      Tested-by: default avatarPhilipp Hahn <pmhahn@pmhahn.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5527dda
    • Rainer Weikusat's avatar
      af_unix: Don't set err in unix_stream_read_generic unless there was an error · 1b92ee3d
      Rainer Weikusat authored
      The present unix_stream_read_generic contains various code sequences of
      the form
      
      err = -EDISASTER;
      if (<test>)
      	goto out;
      
      This has the unfortunate side effect of possibly causing the error code
      to bleed through to the final
      
      out:
      	return copied ? : err;
      
      and then to be wrongly returned if no data was copied because the caller
      didn't supply a data buffer, as demonstrated by the program available at
      
      http://pad.lv/1540731
      
      Change it such that err is only set if an error condition was detected.
      
      Fixes: 3822b5c2 ("af_unix: Revert 'lock_interruptible' in stream receive code")
      Reported-by: default avatarJoseph Salisbury <joseph.salisbury@canonical.com>
      Signed-off-by: default avatarRainer Weikusat <rweikusat@mobileactivedefense.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1b92ee3d
  2. 13 Feb, 2016 19 commits
    • Michael McConville's avatar
      dscc4: Undefined signed int shift · db92ea5d
      Michael McConville authored
      My analysis in the below mail applies, although the second part is
      unnecessary because i isn't used in arithmetic operations here:
      
      https://marc.info/?l=openbsd-tech&m=145377854103866&w=2
      
      Thanks for your time.
      Signed-off-by: default avatarMichael McConville <mmcco@mykolab.com>
      Acked-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db92ea5d
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: do not leave reserved VLANs · 66d9cd0f
      Vivien Didelot authored
      BRIDGE_VLAN_FILTERING automatically adds a newly bridged port to the
      VLAN with the bridge's default_pvid.
      
      The mv88e6xxx driver currently reserves VLANs 4000+ for unbridged ports
      isolation. When a port joins a bridge, it leaves its reserved VLAN. When
      a port leaves a bridge, it joins again its reserved VLAN.
      
      But if the VLAN filtering is disabled, or if this hardware VLAN is
      already in use, the bridged port ends up with no default VLAN, and the
      communication with the CPU is thus broken.
      
      To fix this, make a port join its reserved VLAN once on setup, never
      leave it, and restore its PVID after another one was eventually used.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      66d9cd0f
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: fix software VLAN deletion · 3c06f08b
      Vivien Didelot authored
      The current bridge code calls switchdev_port_obj_del on a VLAN port even
      if the corresponding switchdev_port_obj_add call returned -EOPNOTSUPP.
      
      If the DSA driver doesn't return -EOPNOTSUPP for a software port VLAN in
      its port_vlan_del function, the VLAN is not deleted. Unbridging the port
      also generates a stack trace for the same reason.
      
      This can be quickly tested on a VLAN filtering enabled system with:
      
          # brctl addbr br0
          # brctl addif br0 lan0
          # brctl addbr br1
          # brctl addif br1 lan1
          # brctl delif br1 lan1
      
      Both bridges have a default default_pvid set to 1. lan0 uses the
      hardware VLAN 1 while lan1 falls back to the software VLAN 1.
      
      Unbridging lan1 does not delete its software VLAN, and thus generates
      the following stack trace:
      
          [ 2991.681705] device lan1 left promiscuous mode
          [ 2991.686237] br1: port 1(lan1) entered disabled state
          [ 2991.725094] ------------[ cut here ]------------
          [ 2991.729761] WARNING: CPU: 0 PID: 869 at net/bridge/br_vlan.c:314 __vlan_group_free+0x4c/0x50()
          [ 2991.738437] Modules linked in:
          [ 2991.741546] CPU: 0 PID: 869 Comm: ip Not tainted 4.4.0 #16
          [ 2991.747039] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
          [ 2991.753511] Backtrace:
          [ 2991.756008] [<80014450>] (dump_backtrace) from [<8001469c>] (show_stack+0x20/0x24)
          [ 2991.763604]  r6:80512644 r5:00000009 r4:00000000 r3:00000000
          [ 2991.769343] [<8001467c>] (show_stack) from [<80268e44>] (dump_stack+0x24/0x28)
          [ 2991.776618] [<80268e20>] (dump_stack) from [<80025568>] (warn_slowpath_common+0x98/0xc4)
          [ 2991.784750] [<800254d0>] (warn_slowpath_common) from [<80025650>] (warn_slowpath_null+0x2c/0x34)
          [ 2991.793557]  r8:00000000 r7:9f786a8c r6:9f76c440 r5:9f786a00 r4:9f68ac00
          [ 2991.800366] [<80025624>] (warn_slowpath_null) from [<80512644>] (__vlan_group_free+0x4c/0x50)
          [ 2991.808946] [<805125f8>] (__vlan_group_free) from [<80514488>] (nbp_vlan_flush+0x44/0x68)
          [ 2991.817147]  r4:9f68ac00 r3:9ec70000
          [ 2991.820772] [<80514444>] (nbp_vlan_flush) from [<80506f08>] (del_nbp+0xac/0x130)
          [ 2991.828201]  r5:9f56f800 r4:9f786a00
          [ 2991.831841] [<80506e5c>] (del_nbp) from [<8050774c>] (br_del_if+0x40/0xbc)
          [ 2991.838724]  r7:80590f68 r6:00000000 r5:9ec71c38 r4:9f76c440
          [ 2991.844475] [<8050770c>] (br_del_if) from [<80503dc0>] (br_del_slave+0x1c/0x20)
          [ 2991.851802]  r5:9ec71c38 r4:9f56f800
          [ 2991.855428] [<80503da4>] (br_del_slave) from [<80484a34>] (do_setlink+0x324/0x7b8)
          [ 2991.863043] [<80484710>] (do_setlink) from [<80485e90>] (rtnl_newlink+0x508/0x6f4)
          [ 2991.870616]  r10:00000000 r9:9ec71ba8 r8:00000000 r7:00000000 r6:9f6b0400 r5:9f56f800
          [ 2991.878548]  r4:8076278c
          [ 2991.881110] [<80485988>] (rtnl_newlink) from [<80484048>] (rtnetlink_rcv_msg+0x18c/0x22c)
          [ 2991.889315]  r10:9f7d4e40 r9:00000000 r8:00000000 r7:00000000 r6:9f7d4e40 r5:9f6b0400
          [ 2991.897250]  r4:00000000
          [ 2991.899814] [<80483ebc>] (rtnetlink_rcv_msg) from [<80497c74>] (netlink_rcv_skb+0xb0/0xcc)
          [ 2991.908104]  r8:00000000 r7:9f7d4e40 r6:9f7d4e40 r5:80483ebc r4:9f6b0400
          [ 2991.914928] [<80497bc4>] (netlink_rcv_skb) from [<80483eb4>] (rtnetlink_rcv+0x34/0x3c)
          [ 2991.922874]  r6:9f5ea000 r5:00000028 r4:9f7d4e40 r3:80483e80
          [ 2991.928622] [<80483e80>] (rtnetlink_rcv) from [<80497604>] (netlink_unicast+0x180/0x200)
          [ 2991.936742]  r4:9f4edc00 r3:80483e80
          [ 2991.940362] [<80497484>] (netlink_unicast) from [<80497a88>] (netlink_sendmsg+0x33c/0x350)
          [ 2991.948648]  r8:00000000 r7:00000028 r6:00000000 r5:9f5ea000 r4:9ec71f4c
          [ 2991.955481] [<8049774c>] (netlink_sendmsg) from [<80457ff0>] (sock_sendmsg+0x24/0x34)
          [ 2991.963342]  r10:00000000 r9:9ec71e28 r8:00000000 r7:9f1e2140 r6:00000000 r5:00000000
          [ 2991.971276]  r4:9ec71f4c
          [ 2991.973849] [<80457fcc>] (sock_sendmsg) from [<80458af0>] (___sys_sendmsg+0x1fc/0x204)
          [ 2991.981809] [<804588f4>] (___sys_sendmsg) from [<804598d0>] (__sys_sendmsg+0x4c/0x7c)
          [ 2991.989640]  r10:00000000 r9:9ec70000 r8:80010824 r7:00000128 r6:7ee946c4 r5:00000000
          [ 2991.997572]  r4:9f1e2140
          [ 2992.000128] [<80459884>] (__sys_sendmsg) from [<80459918>] (SyS_sendmsg+0x18/0x1c)
          [ 2992.007725]  r6:00000000 r5:7ee9c7b8 r4:7ee946e0
          [ 2992.012430] [<80459900>] (SyS_sendmsg) from [<80010660>] (ret_fast_syscall+0x0/0x3c)
          [ 2992.020182] ---[ end trace 5d4bc29f4da04280 ]---
      
      To fix this, return -EOPNOTSUPP in _mv88e6xxx_port_vlan_del instead of
      -ENOENT if the hardware VLAN doesn't exist or the port is not a member.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c06f08b
    • Colin Ian King's avatar
      net: cavium: liquidio: fix check for in progress flag · 19a6d156
      Colin Ian King authored
      smatch detected a suspicious looking bitop condition:
      
      drivers/net/ethernet/cavium/liquidio/lio_main.c:2529
        handle_timestamp() warn: suspicious bitop condition
      
      (skb_shinfo(skb)->tx_flags | SKBTX_IN_PROGRESS is always non-zero,
      so the logic is definitely not correct.  Use & to mask the correct
      bit.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      19a6d156
    • Vitaly Kuznetsov's avatar
      hv_netvsc: Restore needed_headroom request · 14a03cf8
      Vitaly Kuznetsov authored
      Commit c0eb4540 ("hv_netvsc: Don't ask for additional head room in the
      skb") got rid of needed_headroom setting for the driver. With the change I
      hit the following issue trying to use ptkgen module:
      
      [   57.522021] kernel BUG at net/core/skbuff.c:1128!
      [   57.522021] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
      ...
      [   58.721068] Call Trace:
      [   58.721068]  [<ffffffffa0144e86>] netvsc_start_xmit+0x4c6/0x8e0 [hv_netvsc]
      ...
      [   58.721068]  [<ffffffffa02f87fc>] ? pktgen_finalize_skb+0x25c/0x2a0 [pktgen]
      [   58.721068]  [<ffffffff814f5760>] ? __netdev_alloc_skb+0xc0/0x100
      [   58.721068]  [<ffffffffa02f9907>] pktgen_thread_worker+0x257/0x1920 [pktgen]
      
      Basically, we're calling skb_cow_head(skb, RNDIS_AND_PPI_SIZE) and crash on
          if (skb_shared(skb))
              BUG();
      
      We probably need to restore needed_headroom setting (but shrunk to
      RNDIS_AND_PPI_SIZE as we don't need more) to request the required headroom
      space. In theory, it should not give us performance penalty.
      Signed-off-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      14a03cf8
    • David S. Miller's avatar
      Merge branch 'mvneta-fixes' · 603607de
      David S. Miller authored
      Gregory CLEMENT says:
      
      ====================
      mvneta fixes for SMP
      
      Following this bug report:
      http://thread.gmane.org/gmane.linux.ports.arm.kernel/468173 and the
      suggestions from Russell King, I reviewed all the code involving
      multi-CPU. It ended with this series of patches which should improve
      the stability of the driver.
      
      During my test I found another bug which is fixed by new patch (the
      second one of this new version of the series)
      
      The two first patches fix real bugs, the others fix potential issues
      in the driver.
      
      Changelog:
      
      v1 -> v2
      Fix spinlock comment. Pointed by David Miller
      
      v2 -> v3
       - Fix typos and mistake in the comments. Pointed by Sergei Shtylyov
       - Add a new patch fixing the CPU choice in mvneta_percpu_elect
       - Use lock in last patch to prevent remaining race condition. Pointed
         by Jisheng
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      603607de
    • Gregory CLEMENT's avatar
      net: mvneta: Fix race condition during stopping · 120cfa50
      Gregory CLEMENT authored
      When stopping the port, the CPU notifier are still there whereas the
      mvneta_stop_dev function calls mvneta_percpu_disable() on each CPUs.
      It was possible to have a new CPU coming at this point which could be
      racy.
      
      This patch adds a flag preventing executing the code notifier for a new
      CPU when the port is stopping. It also uses the spinlock introduces
      previously. To avoid the deadlock, the lock has been moved outside the
      mvneta_percpu_elect function.
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      120cfa50
    • Gregory CLEMENT's avatar
      net: mvneta: The mvneta_percpu_elect function should be atomic · 5888511e
      Gregory CLEMENT authored
      Electing a CPU must be done in an atomic way: it should be done after or
      before the removal/insertion of a CPU and this function is not reentrant.
      
      During the loop of mvneta_percpu_elect we associates the queues to the
      CPUs, if there is a topology change during this loop, then the mapping
      between the CPUs and the queues could be wrong. During this loop the
      interrupt mask is also updating for each CPUs, It should not be changed
      in the same time by other part of the driver.
      
      This patch adds spinlock to create the needed critical sections.
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5888511e
    • Gregory CLEMENT's avatar
      net: mvneta: Modify the queue related fields from each cpu · db488c10
      Gregory CLEMENT authored
      In the MVNETA_INTR_* registers, the queues related fields are per cpu,
      according to the datasheet (comment in [] are added by me):
      "In a multi-CPU system, bits of RX[or TX] queues for which the access by
      the reading[or writing] CPU is disabled are read as 0, and cannot be
      cleared[or written]."
      
      That means that each time we want to manipulate these bits we had to do
      it on each cpu and not only on the current cpu.
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db488c10
    • Gregory CLEMENT's avatar
      net: mvneta: Remove unused code · cde4c0fe
      Gregory CLEMENT authored
      Since the commit 2dcf75e2 ("net: mvneta: Associate RX queues with
      each CPU") all the percpu irq are used and disabled at initialization, so
      there is no point to disable them first.
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cde4c0fe
    • Gregory CLEMENT's avatar
      net: mvneta: Use on_each_cpu when possible · 6b125d63
      Gregory CLEMENT authored
      Instead of using a for_each_* loop in which we just call the
      smp_call_function_single macro, it is more simple to directly use the
      on_each_cpu macro. Moreover, this macro ensures that the calls will be
      done all at once.
      Suggested-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6b125d63
    • Gregory CLEMENT's avatar
      net: mvneta: Fix the CPU choice in mvneta_percpu_elect · cad5d847
      Gregory CLEMENT authored
      When passing to the management of multiple RX queue, the
      mvneta_percpu_elect function was broken. The use of the modulo can lead
      to elect the wrong cpu. For example with rxq_def=2, if the CPU 2 goes
      offline and then online, we ended with the third RX queue activated in
      the same time on CPU 0 and CPU2, which lead to a kernel crash.
      
      With this fix, we don't try to get "the closer" CPU if the default CPU is
      gone, now we just use CPU 0 which always be there. Thanks to this, the
      code becomes more readable, easier to maintain and more predicable.
      
      Cc: stable@vger.kernel.org
      Fixes: 2dcf75e2 ("net: mvneta: Associate RX queues with each CPU")
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cad5d847
    • Gregory CLEMENT's avatar
      net: mvneta: Fix for_each_present_cpu usage · 129219e4
      Gregory CLEMENT authored
      This patch convert the for_each_present in on_each_cpu, instead of
      applying on the present cpus it will be applied only on the online cpus.
      This fix a bug reported on
      http://thread.gmane.org/gmane.linux.ports.arm.kernel/468173.
      
      Using the macro on_each_cpu (instead of a for_each_* loop) also ensures
      that all the calls will be done all at once.
      
      Fixes: f8642885 ("net: mvneta: Statically assign queues to CPUs")
      Reported-by: default avatarStefan Roese <stefan.roese@gmail.com>
      Suggested-by: default avatarJisheng Zhang <jszhang@marvell.com>
      Suggested-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      129219e4
    • Laura Abbott's avatar
      vsock: Fix blocking ops call in prepare_to_wait · 59888180
      Laura Abbott authored
      We receoved a bug report from someone using vmware:
      
      WARNING: CPU: 3 PID: 660 at kernel/sched/core.c:7389
      __might_sleep+0x7d/0x90()
      do not call blocking ops when !TASK_RUNNING; state=1 set at
      [<ffffffff810fa68d>] prepare_to_wait+0x2d/0x90
      Modules linked in: vmw_vsock_vmci_transport vsock snd_seq_midi
      snd_seq_midi_event snd_ens1371 iosf_mbi gameport snd_rawmidi
      snd_ac97_codec ac97_bus snd_seq coretemp snd_seq_device snd_pcm
      snd_timer snd soundcore ppdev crct10dif_pclmul crc32_pclmul
      ghash_clmulni_intel vmw_vmci vmw_balloon i2c_piix4 shpchp parport_pc
      parport acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc btrfs
      xor raid6_pq 8021q garp stp llc mrp crc32c_intel serio_raw mptspi vmwgfx
      drm_kms_helper ttm drm scsi_transport_spi mptscsih e1000 ata_generic
      mptbase pata_acpi
      CPU: 3 PID: 660 Comm: vmtoolsd Not tainted
      4.2.0-0.rc1.git3.1.fc23.x86_64 #1
      Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
      Reference Platform, BIOS 6.00 05/20/2014
       0000000000000000 0000000049e617f3 ffff88006ac37ac8 ffffffff818641f5
       0000000000000000 ffff88006ac37b20 ffff88006ac37b08 ffffffff810ab446
       ffff880068009f40 ffffffff81c63bc0 0000000000000061 0000000000000000
      Call Trace:
       [<ffffffff818641f5>] dump_stack+0x4c/0x65
       [<ffffffff810ab446>] warn_slowpath_common+0x86/0xc0
       [<ffffffff810ab4d5>] warn_slowpath_fmt+0x55/0x70
       [<ffffffff8112551d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
       [<ffffffff810fa68d>] ? prepare_to_wait+0x2d/0x90
       [<ffffffff810fa68d>] ? prepare_to_wait+0x2d/0x90
       [<ffffffff810da2bd>] __might_sleep+0x7d/0x90
       [<ffffffff812163b3>] __might_fault+0x43/0xa0
       [<ffffffff81430477>] copy_from_iter+0x87/0x2a0
       [<ffffffffa039460a>] __qp_memcpy_to_queue+0x9a/0x1b0 [vmw_vmci]
       [<ffffffffa0394740>] ? qp_memcpy_to_queue+0x20/0x20 [vmw_vmci]
       [<ffffffffa0394757>] qp_memcpy_to_queue_iov+0x17/0x20 [vmw_vmci]
       [<ffffffffa0394d50>] qp_enqueue_locked+0xa0/0x140 [vmw_vmci]
       [<ffffffffa039593f>] vmci_qpair_enquev+0x4f/0xd0 [vmw_vmci]
       [<ffffffffa04847bb>] vmci_transport_stream_enqueue+0x1b/0x20
      [vmw_vsock_vmci_transport]
       [<ffffffffa047ae05>] vsock_stream_sendmsg+0x2c5/0x320 [vsock]
       [<ffffffff810fabd0>] ? wake_atomic_t_function+0x70/0x70
       [<ffffffff81702af8>] sock_sendmsg+0x38/0x50
       [<ffffffff81702ff4>] SYSC_sendto+0x104/0x190
       [<ffffffff8126e25a>] ? vfs_read+0x8a/0x140
       [<ffffffff817042ee>] SyS_sendto+0xe/0x10
       [<ffffffff8186d9ae>] entry_SYSCALL_64_fastpath+0x12/0x76
      
      transport->stream_enqueue may call copy_to_user so it should
      not be called inside a prepare_to_wait. Narrow the scope of
      the prepare_to_wait to avoid the bad call. This also applies
      to vsock_stream_recvmsg as well.
      Reported-by: default avatarVinson Lee <vlee@freedesktop.org>
      Tested-by: default avatarVinson Lee <vlee@freedesktop.org>
      Signed-off-by: default avatarLaura Abbott <labbott@fedoraproject.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      59888180
    • Chun-Hao Lin's avatar
      r8169:fix system hange problem. · a2cb7ec0
      Chun-Hao Lin authored
      There are typos in setting RTL8168H hardware parameters. If system install
      another version driver that may cuase system hang.
      Signed-off-by: default avatarChunhao Lin <hau@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2cb7ec0
    • Eric Dumazet's avatar
      ipv4: fix memory leaks in ip_cmsg_send() callers · 91948309
      Eric Dumazet authored
      Dmitry reported memory leaks of IP options allocated in
      ip_cmsg_send() when/if this function returns an error.
      
      Callers are responsible for the freeing.
      
      Many thanks to Dmitry for the report and diagnostic.
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91948309
    • Amitoj Kaur Chawla's avatar
      net: mvpp2: Return correct error codes · c2bb7bc5
      Amitoj Kaur Chawla authored
      The return value of kzalloc on failure of allocation of memory should
      be -ENOMEM and not -1.
      
      Found using Coccinelle. A simplified version of the semantic patch
      used is:
      
      //<smpl>
      @@
      expression *e;
      position p,q;
      @@
      
      e@q = kzalloc(...);
      if@p (e == NULL) {
      ...
      return
      - -1
      + -ENOMEM
      ;
      }
      //</smpl>
      
      This function may also return -1 after calling mpp2_prs_tcam_port_map_get.
      So that the function consistently returns meaningful error values on
      failure, the -1 is changed to -EINVAL.
      Signed-off-by: default avatarAmitoj Kaur Chawla <amitoj1606@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2bb7bc5
    • Amitoj Kaur Chawla's avatar
      net: cavium: liquidio: Return correct error code · 08a965ec
      Amitoj Kaur Chawla authored
      The return value of vmalloc on failure of allocation of memory should
      be -ENOMEM and not -1.
      
      Found using Coccinelle. A simplified version of the semantic patch
      used is:
      
      //<smpl>
      @@
      expression *e;
      identifier l1;
      position p,q;
      @@
      
      e@q = vmalloc(...);
      if@p (e == NULL) {
      ...
      goto l1;
      }
      l1:
      ...
      return -1
      + -ENOMEM
      ;
      //</smpl
      
      The single call site of the containing function checks whether the
      returned value is -1, so this check is changed as well. The single call
      site of this call site, however, only checks whether the value is not 0,
      so no further change was required.
      Signed-off-by: default avatarAmitoj Kaur Chawla <amitoj1606@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      08a965ec
    • Jay Vosburgh's avatar
      bonding: Fix ARP monitor validation · 21a75f09
      Jay Vosburgh authored
      The current logic in bond_arp_rcv will accept an incoming ARP for
      validation if (a) the receiving slave is either "active" (which includes
      the currently active slave, or the current ARP slave) or, (b) there is a
      currently active slave, and it has received an ARP since it became active.
      For case (b), the receiving slave isn't the currently active slave, and is
      receiving the original broadcast ARP request, not an ARP reply from the
      target.
      
      	This logic can fail if there is no currently active slave.  In
      this situation, the ARP probe logic cycles through all slaves, assigning
      each in turn as the "current_arp_slave" for one arp_interval, then setting
      that one as "active," and sending an ARP probe from that slave.  The
      current logic expects the ARP reply to arrive on the sending
      current_arp_slave, however, due to switch FDB updating delays, the reply
      may be directed to another slave.
      
      	This can arise if the bonding slaves and switch are working, but
      the ARP target is not responding.  When the ARP target recovers, a
      condition may result wherein the ARP target host replies faster than the
      switch can update its forwarding table, causing each ARP reply to be sent
      to the previous current_arp_slave.  This will never pass the logic in
      bond_arp_rcv, as neither of the above conditions (a) or (b) are met.
      
      	Some experimentation on a LAN shows ARP reply round trips in the
      200 usec range, but my available switches never update their FDB in less
      than 4000 usec.
      
      	This patch changes the logic in bond_arp_rcv to additionally
      accept an ARP reply for validation on any slave if there is a current ARP
      slave and it sent an ARP probe during the previous arp_interval.
      
      Fixes: aeea64ac ("bonding: don't trust arp requests unless active slave really works")
      Cc: Veaceslav Falico <vfalico@gmail.com>
      Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
      Signed-off-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21a75f09
  3. 11 Feb, 2016 3 commits
    • Linus Torvalds's avatar
      Merge tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · c05235d5
      Linus Torvalds authored
      Pull GPIO fixes from Linus Walleij:
       - Probe errorpath fix for the Altera
       - irqchip ofnode pointer added to the DaVinci driver
       - controller instance number correction for DaVinci
      
      * tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: davinci: Fix the number of controllers allocated
        gpio: davinci: Add the missing of-node pointer
        gpio: gpio-altera: Remove gpiochip on probe failure.
      c05235d5
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v4.5-3' of... · da2f912a
      Linus Torvalds authored
      Merge tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
      
      Pull x86 platform driver fixes from Darren Hart:
       "Just two small fixes for the 4.5-rc cycle:
      
        intel_scu_ipcutil:
         - underflow in scu_reg_access()
      
        intel-hid:
         - fix incorrect entries in intel_hid_keymap"
      
      * tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
        intel_scu_ipcutil: underflow in scu_reg_access()
        intel-hid: fix incorrect entries in intel_hid_keymap
      da2f912a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 5de6ac75
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix BPF handling of branch offset adjustmnets on backjumps, from
          Daniel Borkmann.
      
       2) Make sure selinux knows about SOCK_DESTROY netlink messages, from
          Lorenzo Colitti.
      
       3) Fix openvswitch tunnel mtu regression, from David Wragg.
      
       4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric
          Dumazet.
      
       5) Fix SCTP user hmacid byte ordering bug, from Xin Long.
      
       6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov
          Kasiviswanathan.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        bpf: fix branch offset adjustment on backjumps after patching ctx expansion
        vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
        geneve: Relax MTU constraints
        vxlan: Relax MTU constraints
        flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
        of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.
        selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
        sctp: translate network order to host order when users get a hmacid
        enic: increment devcmd2 result ring in case of timeout
        tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
        net:Add sysctl_max_skb_frags
        tcp: do not drop syn_recv on all icmp reports
        ipv6: fix a lockdep splat
        unix: correctly track in-flight fds in sending process user_struct
        update be2net maintainers' email addresses
        dwc_eth_qos: Reset hardware before PHY start
        ipv6: addrconf: Fix recursive spin lock call
      5de6ac75
  4. 10 Feb, 2016 14 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · 721675fc
      Linus Torvalds authored
      Pull rdma fixes from Doug Ledford:
       "A few more minor fixes for rc3:
      
         - One fix to ipoib
         - One fix to core sysfs code
         - Four patches that resolve an oops found in testing of ocrdma and a
           couple other ocrdma issues"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
        RDMA/ocrdma: Fixing ocrdma debugfs directory remove
        RDMA/ocrdma: Fix pkey_index returned by driver in rq work completion
        RDMA/ocrdma: populate max_sge_rd in device attributes
        RDMA/ocrdma: Initialize stats resources in the driver before ib device registration.
        IB/sysfs: remove unused va_list args
        IB/IPoIB: Do not set skb truesize since using one linearskb
      721675fc
    • Daniel Borkmann's avatar
      bpf: fix branch offset adjustment on backjumps after patching ctx expansion · a1b14d27
      Daniel Borkmann authored
      When ctx access is used, the kernel often needs to expand/rewrite
      instructions, so after that patching, branch offsets have to be
      adjusted for both forward and backward jumps in the new eBPF program,
      but for backward jumps it fails to account the delta. Meaning, for
      example, if the expansion happens exactly on the insn that sits at
      the jump target, it doesn't fix up the back jump offset.
      
      Analysis on what the check in adjust_branches() is currently doing:
      
        /* adjust offset of jmps if necessary */
        if (i < pos && i + insn->off + 1 > pos)
          insn->off += delta;
        else if (i > pos && i + insn->off + 1 < pos)
          insn->off -= delta;
      
      First condition (forward jumps):
      
        Before:                         After:
      
        insns[0]                        insns[0]
        insns[1] <--- i/insn            insns[1] <--- i/insn
        insns[2] <--- pos               insns[P] <--- pos
        insns[3]                        insns[P]  `------| delta
        insns[4] <--- target_X          insns[P]   `-----|
        insns[5]                        insns[3]
                                        insns[4] <--- target_X
                                        insns[5]
      
      First case is if we cross pos-boundary and the jump instruction was
      before pos. This is handeled correctly. I.e. if i == pos, then this
      would mean our jump that we currently check was the patchlet itself
      that we just injected. Since such patchlets are self-contained and
      have no awareness of any insns before or after the patched one, the
      delta is correctly not adjusted. Also, for the second condition in
      case of i + insn->off + 1 == pos, means we jump to that newly patched
      instruction, so no offset adjustment are needed. That part is correct.
      
      Second condition (backward jumps):
      
        Before:                         After:
      
        insns[0]                        insns[0]
        insns[1] <--- target_X          insns[1] <--- target_X
        insns[2] <--- pos <-- target_Y  insns[P] <--- pos <-- target_Y
        insns[3]                        insns[P]  `------| delta
        insns[4] <--- i/insn            insns[P]   `-----|
        insns[5]                        insns[3]
                                        insns[4] <--- i/insn
                                        insns[5]
      
      Second interesting case is where we cross pos-boundary and the jump
      instruction was after pos. Backward jump with i == pos would be
      impossible and pose a bug somewhere in the patchlet, so the first
      condition checking i > pos is okay only by itself. However, i +
      insn->off + 1 < pos does not always work as intended to trigger the
      adjustment. It works when jump targets would be far off where the
      delta wouldn't matter. But, for example, where the fixed insn->off
      before pointed to pos (target_Y), it now points to pos + delta, so
      that additional room needs to be taken into account for the check.
      This means that i) both tests here need to be adjusted into pos + delta,
      and ii) for the second condition, the test needs to be <= as pos
      itself can be a target in the backjump, too.
      
      Fixes: 9bac3d6d ("bpf: allow extended BPF programs access skb fields")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1b14d27
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 74c7b2af
      Linus Torvalds authored
      Pull input updates from Dmitry Torokhov:
       "Just small driver fixups"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: colibri-vf50-ts - add missing #include <linux/of.h>
        Input: adp5589 - fix row 5 handling for adp5589
        Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree
        Input: vmmouse - fix absolute device registration
        Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()
        Input: cap11xx - add missing of_node_put
        Input: sirfsoc-onkey - allow modular build
        Input: xpad - remove unused function
      74c7b2af
    • Linus Torvalds's avatar
      Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata · 4e541699
      Linus Torvalds authored
      Pull libata fixes from Tejun Heo:
      
       - PORTS_IMPL workaround for very early ahci controllers is misbehaving
         on new systems.  Disabled on recent ahci versions.
      
       - Old-style PIO state machine had a horrible locking problem.  Don't
         know how we've been getting away this far.  Fixed.
      
       - Other device specific updates.
      
      * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
        ahci: Intel DNV device IDs SATA
        libata: fix sff host state machine locking while polling
        libata-sff: use WARN instead of BUG on illegal host state machine state
        libata: disable forced PORTS_IMPL for >= AHCI 1.3
        libata: blacklist a Viking flash model for MWDMA corruption
        drivers: ata: wake port before DMA stop for ALPM
      4e541699
    • Linus Torvalds's avatar
      Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · fb0dc5f1
      Linus Torvalds authored
      Pull cgroup fixes from Tejun Heo:
      
       - The destruction path of cgroup objects are asynchronous and
         multi-staged and some of them ended up destroying parents before
         children leading to failures in cpu and memory controllers.  Ensure
         that parents are always destroyed after children.
      
       - cpuset mm node migration was performed synchronously while holding
         threadgroup and cgroup mutexes and the recent threadgroup locking
         update resulted in a possible deadlock.  The migration is best effort
         and shouldn't have been performed under those locks to begin with.
         Made asynchronous.
      
       - Minor documentation fix.
      
      * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
        Documentation: cgroup: Fix 'cgroup-legacy' -> 'cgroup-v1'
        cgroup: make sure a parent css isn't freed before its children
        cgroup: make sure a parent css isn't offlined before its children
        cpuset: make mm migration asynchronous
      fb0dc5f1
    • Linus Torvalds's avatar
      Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · 9aece75c
      Linus Torvalds authored
      Pull workqueue fixes from Tejun Heo:
       "Workqueue fixes for v4.5-rc3.
      
         - Remove a spurious triggering of flush dependency warning.
      
         - Officially break local execution guarantee of unbound work items
           and add a debug feature to flush out usages which depend on it.
      
         - Work around CPU -> NODE mapping becoming invalid on CPU offline.
      
        The branch is young but pushing out early as stable kernels are being
        affected"
      
      * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
        workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
        workqueue: implement "workqueue.debug_force_rr_cpu" debug feature
        workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs
        Revert "workqueue: make sure delayed work run in local cpu"
        workqueue: skip flush dependency checks for legacy workqueues
      9aece75c
    • Tejun Heo's avatar
      workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup · d6e022f1
      Tejun Heo authored
      When looking up the pool_workqueue to use for an unbound workqueue,
      workqueue assumes that the target CPU is always bound to a valid NUMA
      node.  However, currently, when a CPU goes offline, the mapping is
      destroyed and cpu_to_node() returns NUMA_NO_NODE.
      
      This has always been broken but hasn't triggered often enough before
      874bbfe6 ("workqueue: make sure delayed work run in local cpu").
      After the commit, workqueue forcifully assigns the local CPU for
      delayed work items without explicit target CPU to fix a different
      issue.  This widens the window where CPU can go offline while a
      delayed work item is pending causing delayed work items dispatched
      with target CPU set to an already offlined CPU.  The resulting
      NUMA_NO_NODE mapping makes workqueue try to queue the work item on a
      NULL pool_workqueue and thus crash.
      
      While 874bbfe6 has been reverted for a different reason making the
      bug less visible again, it can still happen.  Fix it by mapping
      NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node().
      This is a temporary workaround.  The long term solution is keeping CPU
      -> NODE mapping stable across CPU off/online cycles which is being
      worked on.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Reported-by: default avatarMike Galbraith <umgwanakikbuti@gmail.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Rafael J. Wysocki <rafael@kernel.org>
      Cc: Len Brown <len.brown@intel.com>
      Cc: stable@vger.kernel.org
      Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com
      Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com
      d6e022f1
    • Alexandra Yates's avatar
      ahci: Intel DNV device IDs SATA · 342decff
      Alexandra Yates authored
      Adding Intel codename DNV platform device IDs for SATA.
      Signed-off-by: default avatarAlexandra Yates <alexandra.yates@linux.intel.com>
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: stable@vger.kernel.org
      342decff
    • David S. Miller's avatar
      Merge branch 'ovs-tunnel-mtu' · 1902750b
      David S. Miller authored
      David Wragg says:
      
      ====================
      Set a large MTU on ovs-created tunnel devices
      
      Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could
      transmit vxlan packets of any size, constrained only by the ability to
      send out the resulting packets.  4.3 introduced netdevs corresponding
      to tunnel vports.  These netdevs have an MTU, which limits the size of
      a packet that can be successfully encapsulated.  The default MTU
      values are low (1500 or less), which is awkwardly small in the context
      of physical networks supporting jumbo frames, and leads to a
      conspicuous change in behaviour for userspace.
      
      This patch series sets the MTU on openvswitch-created netdevs to be
      the relevant maximum (i.e. the maximum IP packet size minus any
      relevant overhead), effectively restoring the behaviour prior to 4.3.
      
      Where relevant, the limits on MTU values that can be directly set on
      the netdevs are also relaxed.
      
      Changes in v2:
      * Extend to all openvswitch tunnel types, i.e. gre and geneve as well
      * Use IP_MAX_MTU
      
      Changes in v3:
      * Fix block comment style
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1902750b
    • David Wragg's avatar
      vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices · 7e059158
      David Wragg authored
      Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could
      transmit vxlan packets of any size, constrained only by the ability to
      send out the resulting packets.  4.3 introduced netdevs corresponding
      to tunnel vports.  These netdevs have an MTU, which limits the size of
      a packet that can be successfully encapsulated.  The default MTU
      values are low (1500 or less), which is awkwardly small in the context
      of physical networks supporting jumbo frames, and leads to a
      conspicuous change in behaviour for userspace.
      
      Instead, set the MTU on openvswitch-created netdevs to be the relevant
      maximum (i.e. the maximum IP packet size minus any relevant overhead),
      effectively restoring the behaviour prior to 4.3.
      Signed-off-by: default avatarDavid Wragg <david@weave.works>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7e059158
    • David Wragg's avatar
      geneve: Relax MTU constraints · 55e5bfb5
      David Wragg authored
      Allow the MTU of geneve devices to be set to large values, in order to
      exploit underlying networks with larger frame sizes.
      
      GENEVE does not have a fixed encapsulation overhead (an openvswitch
      rule can add variable length options), so there is no relevant maximum
      MTU to enforce.  A maximum of IP_MAX_MTU is used instead.
      Encapsulated packets that are too big for the underlying network will
      get dropped on the floor.
      Signed-off-by: default avatarDavid Wragg <david@weave.works>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      55e5bfb5
    • David Wragg's avatar
      vxlan: Relax MTU constraints · 72564b59
      David Wragg authored
      Allow the MTU of vxlan devices without an underlying device to be set
      to larger values (up to a maximum based on IP packet limits and vxlan
      overhead).
      
      Previously, their MTUs could not be set to higher than the
      conventional ethernet value of 1500.  This is a very arbitrary value
      in the context of vxlan, and prevented vxlan devices from being able
      to take advantage of jumbo frames etc.
      
      The default MTU remains 1500, for compatibility.
      Signed-off-by: default avatarDavid Wragg <david@weave.works>
      Acked-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72564b59
    • Lokesh Vutla's avatar
      gpio: davinci: Fix the number of controllers allocated · 6ec9249a
      Lokesh Vutla authored
      Driver only needs to allocate for [ngpio / 32] controllers,
      as each controller handles 32 gpios. But the current driver
      allocates for ngpio of which the extra allocated are unused.
      Fix it be registering only the required number of controllers.
      Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
      Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
      Reviewed-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      6ec9249a
    • Keerthy's avatar
      gpio: davinci: Add the missing of-node pointer · 310a7e60
      Keerthy authored
      Currently the first parameter of irq_domain_add_legacy is NULL.
      irq_find_host function returns NULL when we do not populate the of_node
      and hence irq_of_parse_and_map call fails whenever we want to request a
      gpio irq. This fixes the request_irq failures for gpio interrupts.
      Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
      Reviewed-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      310a7e60