Missed conversion when killing off the APBASE defines.

- Remove references to 8151, as its not specific to this driver
- K8 & x86-64 is deprecated in favour of amd64

X86_64 -> AMD64

From Andi Kleen.

- Fix the help text for the 8151 driver
- Fix the dependencies (must be compiled in when the IOMMU is in)
- Add __setup options for when the AGP driver is compiled in:
agp=off  agp=try_unsupported
Currently only supported for the K8 driver, the other drivers
would need fixes in their module init functions too.
- Add try_unsupported support for the K8 driver.
- Add some aperture sanity checking to the K8 driver.
There are unfortunately still BIOS around that get it wrong.
- Also try to read the aperture from the AGP bridge if it is bogus
in the Northbridge. Windows only looks into the bridge and some BIOS only
put the aperture there.
[These two changes are only useful for 32bit kernels. The 64bit kernel
checks this in aperture.c anyways, and fixes it. The 32bit kernel
cannot fix a complety broken aperture currently, but at least it will
not crash now]
- Clean up handling for multiple northbridges. The paths are the same
now for as for a single NB.
- Some other minor cleanups. 

- Add some new IDs
- Rename some older ones.

into hardwired.(none):/mnt/raid/src/kernel/2.6/trees/agpgart

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

Dan hasn't been maintaining cramfs for some time.

Mark it orphan until somebody else takes it up.

into home.osdl.org:/home/torvalds/v2.5/linux

This removes the pointless cramfs message when booting with cramfs
compiled in but not as the root filesystem.

into kernel.bkbits.net:/home/davem/net-2.5

Cleanup the timer code.  It works as is, but:
- use timer_ macro's when working with jiffies.
- cleanup the #define's
- make timer run sooner (ie when next entry will expire)
  rather than waiting till the next 10 minute quanta.
- print TTL value in seconds not jiffies
- change formatting to linux style in code the area affected.

Better version of my seq_file next operation.
Use current pointer to find next element.  Should be more
stable with changing list (no duplicate entries).

Rather than a simple for loop sum, use a better hash function
for the mac address.

Function repurposed from Lennert's bridge code.

Multicast address value is put on stack and can just be static const.

Use spin_lock on hash table consistently, this code is only called
from bottom half context, never from interrupt context so use spin_lock_bh.

- ax25_cb's use refcounting
- the ax25_cb list uses hlists
- Lots of socket locking.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into kroah.com:/home/linux/BK/pci-2.5

 * makes the three USB drivers not use the procfs stuff, also added a
   warning that they should converted to sysfs.
 * Removes the leftover, obsolete VIDEO_PROC_FS config option, that
   should catch any other build failures too (if any).

  - updated documentation and timestamp

D:2003/08/20 10:59:59
A:Jaroslav Kysela <perex@suse.cz>
F:usb/usbaudio.c:1.62->1.63 
F:usb/usbaudio.h:1.20->1.21 
F:usb/usbmixer.c:1.21->1.22 
L:Synced USB audio driver with the latest 2.6 code

D:2003/08/16 10:54:09
A:Jaroslav Kysela <perex@suse.cz>
F:core/oss/pcm_oss.c:1.45->1.46 
L:Fixed open for O_RDWR when capture is not available

D:2003/08/14 17:05:13
A:Takashi Iwai <tiwai@suse.de>
F:pci/ac97/ac97_codec.c:1.100->1.101 
L:fix by James Courtier-Dutton <James@superbug.demon.co.uk>:
L:
L:Fixes ac3 passthru non-audio bit setting for AC97 codecs.
L:
L:I have :-
L:Card: Intel ICH5
L:Chip: Avance Logic ALC650 rev 0
L:
L:The problem I was having was that the spdif non-audio bit was not
L:being set.
L:This patch fixes that problem.