An error occurred fetching the project authors.
- 30 Dec, 2011 39 commits
-
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
-
Andreas Oberritter authored
There are some issues and miss-behaves at the dvb fe thread: 1) dvb_shutdown_timeout should be dvb_shutdown_timeout * HZ instead of (dvb_shutdown_timeout * HZ + 1); 2) add a memory barrier to warrant that all CPU's will consider the new value for release_jiffies; 3) wake up dvb thread also when fepriv->exit == DVB_FE_NO_EXIT. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Stas Sergeev authored
The attached patch fixes the automute logic of saa7134. It avoids the white noise on the pulseaudio startup. (pulseaudio reads the saa7134 alsa device on startup) Signed-off-by: -
Xi Wang authored
Message-Id: <1322820073-19347-4-git-send-email-xi.wang@gmail.com> The error handling with (ret < 0) didn't work where ret is a u32. Use int instead. To be consistent we also change the functions to return an int. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Xi Wang authored
Message-Id: <1322820073-19347-3-git-send-email-xi.wang@gmail.com> The error handling with (ret < 0) didn't work where ret is a u32. Use int instead. To be consistent we also change the functions to return an int. Signed-off-by:
-
Xi Wang authored
Message-Id: <1322820073-19347-2-git-send-email-xi.wang@gmail.com> The error handling with (ret < 0) didn't work where ret is a u32. Use int instead. To be consistent we also change the functions to return an int. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
The new iso bandwidth calculation code accidentally has broken support for bulk mode cameras. This has broken the following drivers: finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x, stv0680, vicam. Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam cams. Signed-off-by:
-
Mauro Carvalho Chehab authored
It seems that a cut-and-past error were added by the last patch: drivers/media/video/videobuf2-core.c: In function ‘vb2_qbuf’: drivers/media/video/videobuf2-core.c:1099:14: warning: comparison between ‘enum v4l2_buf_type’ and ‘enum v4l2_memory’ [-Wenum-compare] On all places V4L2_MEMORY_USERPTR is used, it is associated with q->memory, and not b->type. So, the fix seems obvious. Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Signed-off-by: -
Andrzej Pietrasiewicz authored
This patch adds support for user pointer memory buffers to vmalloc videobuf2 allocator. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
Marek Szyprowski authored
This patch is a result of review of mem_priv entry usage in videobuf2 core. It fixes all all potential places where it was not checked against NULL or zeroed after freeing as well as a few style issues. Signed-off-by:
-
Marek Szyprowski authored
This patch removes unused 'plane' argument from call_memop macro. Signed-off-by:
-
Marek Szyprowski authored
To get direct access to userspace memory pages vb2 allocator needs to gather read access on mmap semaphore in the current process. The same semaphore is taken before calling mmap operation, while both mmap and qbuf are called by the driver or v4l2 core with driver's lock held. To avoid a AB-BA deadlock (mmap_sem then driver's lock in mmap and driver's lock then mmap_sem in qbuf) the videobuf2 core release driver's lock, takes mmap_sem and then takes again driver's lock. get_userptr methods are now called with all needed locks already taken to avoid further lock magic inside memory allocator's code. Reported-by:
-
Marek Szyprowski authored
Heuristic that checks if the memory pointer has been changed lacked a check if the pointer was actually provided by the userspace, what allowed one to queue a NULL pointer which was accepted without further checking. This patch fixes this issue. Reported-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Michael Krufky authored
fix the following build warning: lgdt330x.c: In function "lgdt330x_set_parameters": lgdt330x.c:346:6: warning: variable "err" set but not used [-Wunused-but-set-variable] Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
initialize *ucblocks to zero & fix the following build warning: lgdt330x.c: In function "lgdt330x_read_ucblocks": lgdt330x.c:288:6: warning: variable "err" set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Manu Abraham authored
PCTV290E: Attach a single frontend, rather than a frontend each per delivery system, whereby a multistandard frontend can advertise all associated delivery systems. Signed-off-by:
Manu Abraham <abraham.manu@gmail.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Manu Abraham authored
Override default delivery system information provided by FE_GET_INFO, so that applications can enumerate delivery systems provided by the frontend. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Hartmut <e9hack@googlemail.com>: > A break is missing before the default statement. Delivery systems for DVB-C result always > in an error. Reported-by:
Hartmut <e9hack@googlemail.com> Signed-off-by:
-
Antti Palosaari authored
Rewrite whole af9013 demod driver in order to decrease I2C I/O. We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used) seems to have some problems under heavy I2C traffic. Signed-off-by:
-
Antti Palosaari authored
AF9015 firmware does not like if it gets interrupted by I2C adapter request on some critical phases. During normal operation I2C adapter is used only 2nd demodulator and tuner on dual tuner devices. Override demodulator callbacks and use mutex for limit access to those "critical" paths to keep AF9015 happy. Signed-off-by:
-
Sylwester Nawrocki authored
Set v4l2_subdev flags for a host driver to create a sub-device node for the driver so the subdev can be directly configured by applications. Add the subdev open() handler. Signed-off-by:
-
Sylwester Nawrocki authored
Set V4L2_SUBDEV_FL_HAS_DEVNODE flag for the host driver to create the sensor device node. Acked-by:
HeungJun Kim <riverful.kim@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Enabling automatic exposure yields better image quality. With this setting the anti-flicker algorithm is also enabled in automatic frequency detection mode which effectively eliminates distortion from fluctuations of light intensity at power line frequency. Acked-by:
-
Sylwester Nawrocki authored
Initialize default pixel format in driver probe() rather than in s_power handler. This also prevents resetting the configuration applied before the device was powered on. Acked-by:
-
Sylwester Nawrocki authored
This is prerequisite for enabling the sub-device node. The control handler is now initialized in driver's probe callback in order to allow the user space access controls before the device power is enabled with s_power. This is needed due to s_power being currently called only by the host driver. It also adds the subdev internal operations, only open() for now for the TRY format initialization. Acked-by:
-
Sylwester Nawrocki authored
v4l2_ctrl_handler_setup() may fail so check its return value when restoring controls after device is powered on. While at it simplify the m5mols_restore_function() a bit. Acked-by:
-
Sylwester Nawrocki authored
Change the v4l2_device notifications id to S5P_FIMC_TX_END_NOTIFY. Moreover, when frame capture fails, send an 'end of frame' notification with size set to 0 to let the host driver return a buffer back to the user and prevent applications waiting forever on DQBUF. The notification is needed only for the s5p-fimc driver. Acked-by:
-
HeungJun Kim authored
Improve the single frame capture set up sequence. Since there is no need to re-enable the interrupts in each capture sequence, unmask the required interrupts once at the device initialization time. Signed-off-by:
-
HeungJun Kim authored
The M-5MOLS internal controller's initialization time depends on the hardware and firmware revision. Currently the driver just waits for worst case time period, after applying the voltage supplies, for the device to be ready. The M-5MOLS supports "System initialization" interrupt which is triggered after the controller finished booting. So use this interrupt to optimize the initialization sequence. After the voltage supplies are applied the I2C communication will fail, until the internal controller initializes to Flash Writer state. For the period when the I2C is not accessible use the isp_ready flag to suppress the error logs. Signed-off-by:
-
Sylwester Nawrocki authored
There is no need to keep this in the drivers' private data structure, an on the stack variable is enough. Also simplify a bit the ISP state switching function. Acked-by:
-
HeungJun Kim authored
The work struct based interrupt handling is not flexible enough as the M-5MOLS control sequence involves I2C access sequences before and after an interrupt is generated. A single waitqueue is enough for the job so remove the work struct based code. Signed-off-by:
-
HeungJun Kim authored
Make m5mols_busy_wait function jiffies based rather than relying on some fixed number of I2C read iterations while busy waiting for the device to execute a request. With fixed number of iterations we may be getting different wait times, depending on the I2C speed. In some conditions we have to wait even if the I2C communications fails, in those cases M5MOLS_I2C_RDY_WAIT_MASK should be passed as the mask argument to m5mols_busy_wait(). Signed-off-by:
-
Sylwester Nawrocki authored
The redundant definitions of the m5mols I2C register addresses within the pages (categories) are removed. In place of symbolic definitions plain numbers are used which simplifies the code and eases identifying the registers in the documentation. Also make the m5mols_busy() function accept I2C_REG() value as a register address, like all other functions, rather than using the category and command values. Acked-by:
-
Sylwester Nawrocki authored
On Exynos SoCs the FIMC IP allows to configure globally the alpha component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control in order to let the applications control the alpha component value. The alpha value range depends on the pixel format, for RGB32 it's 0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15 (4-bits). The v4l2 control range is always 0..255 and the alpha component data width is determined by currently set format on the V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications need to match the alpha channel value range and the pixel format since the driver will clamp the alpha component. Depending on fourcc the valid alpha bits are: - V4L2_PIX_FMT_RGB555 [0] - V4L2_PIX_FMT_RGB444 [3:0] - V4L2_PIX_FMT_RGB32 [7:0] When switching to a pixel format with smaller alpha component width the currently set alpha value will be clamped to maximum value valid for current format. When switching to a format with wider alpha the alpha value remains unchanged. The variant description data structure is extended with a new entry so an additional control is created only where really supported by the hardware. V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue. Signed-off-by:
-
Sylwester Nawrocki authored
The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture or memory-to-memory devices that are capable of setting up the per-pixel alpha component to some arbitrary value. It allows to set the alpha component for all pixels to an arbitrary value. Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 3.2-rc7 * tag 'v3.2-rc7': (1304 commits) Linux 3.2-rc7 netfilter: xt_connbytes: handle negation correctly Btrfs: call d_instantiate after all ops are setup Btrfs: fix worker lock misuse in find_worker net: relax rcvbuf limits rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt() net: introduce DST_NOPEER dst flag mqprio: Avoid panic if no options are provided bridge: provide a mtu() method for fake_dst_ops md/bitmap: It is OK to clear bits during recovery. md: don't give up looking for spares on first failure-to-add md/raid5: ensure correct assessment of drives during degraded reshape. md/linear: fix hot-add of devices to linear arrays. sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq(). pata_of_platform: Add missing CONFIG_OF_IRQ dependency. ipv4: using prefetch requires including prefetch.h VFS: Fix race between CPU hotplug and lglocks vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL USB: Fix usb/isp1760 build on sparc net: Add a flow_cache_flush_deferred function ... Conflicts: drivers/media/common/tuners/tda18218.c drivers/media/video/omap3isp/ispccdc.c drivers/staging/media/as102/as102_drv.h
-
- 24 Dec, 2011 1 commit
-
-
Linus Torvalds authored
-
