- 14 Jul, 2012 1 commit
-
-
Tushar Dave authored
SYNCH bit and IV bit of RXCW register are sticky. Before examining these bits, RXCW should be read twice to filter out one-time false events and have correct values for these bits. Incorrect values of these bits in link check logic can cause weird link stability issues if auto-negotiation fails. CC: stable <stable@vger.kernel.org> [2.6.38+] Reported-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
Tushar Dave <tushar.n.dave@intel.com> Reviewed-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 12 Jul, 2012 1 commit
-
-
Alan Cox authored
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44461Signed-off-by:
Alan Cox <alan@linux.intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 11 Jul, 2012 4 commits
-
-
Michael Chan authored
In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by:
Zongyun Lai <zlai@vmware.com> Reviewed-by:
Jeffrey Huang <huangjw@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
Or Gerlitz reported triggering of WARN_ON_ONCE(delta < len); in skb_try_coalesce() This warning tracks drivers that incorrectly set skb->truesize IPoIB indeed allocates a full page to store a fragment, but only accounts in skb->truesize the used part of the page (frame length) This patch fixes skb truesize underestimation, and also fixes a performance issue, because RX skbs have not enough tailroom to allow IP and TCP stacks to pull their header in skb linear part without an expensive call to pskb_expand_head() Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Shlomo Pongartz <shlomop@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Amir Hanania authored
In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by:
Amir Hanania <amir.hanania@intel.com> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - fix a bug generated by the wrong interaction between the GW feature and the Bridge Loop Avoidance
-
- 09 Jul, 2012 29 commits
-
-
Eric Dumazet authored
commit db83d136 (gianfar: Fix missing sock reference when processing TX time stamps) added a potential sk_wmem_alloc imbalance If the new skb has a different truesize than old one, we can get a negative sk_wmem_alloc once new skb is orphaned at TX completion. Now we no longer early orphan skbs in dev_hard_start_xmit(), this probably can lead to fatal bugs. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Cc: Jiajun Wu <b06378@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Julia Lawall authored
If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. There does not seem to be a meaningful value to provide to netdev_warn. Replace with pr_warn, since pr_err is used elsewhere. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. This seems to be a copy-paste bug from a previous debugging message, and so the meaningless value is just deleted. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by:
-
Julia Lawall authored
If list_for_each_entry, etc complete a traversal of the list, the iterator variable ends up pointing to an address at an offset from the list head, and not a meaningful structure. Thus this value should not be used after the end of the iterator. The dereferences are just deleted from the debugging statement. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by:
-
Eric Dumazet authored
dev->priomap is allocated by extend_netdev_table() called from update_netdev_tables(). And this is only called if write_priomap() is called. But if write_priomap() is not called, it seems we can have out of bounds accesses in cgrp_destroy(), read_priomap() & skb_update_prio() With help from Gao Feng Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Eric W. Biederman authored
The bonding debugfs support has been broken in the presence of network namespaces since it has been added. The debugfs support does not handle multiple bonding devices with the same name in different network namespaces. I haven't had any bug reports, and I'm not interested in getting any. Disable the debugfs support when network namespaces are enabled. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
It was recently reported that moving a bonding device between network namespaces causes warnings from /proc. It turns out after the move we were trying to add and to remove the /proc/net/bonding entries from the wrong network namespace. Move the bonding /proc registration code into the NETDEV_REGISTER and NETDEV_UNREGISTER events where the proc registration and unregistration will always happen at the right time. Signed-off-by:
-
Deepak Sikri authored
For the higher mtu sizes requiring the buffer size greater than 8192, the buffers are sent or received using multiple dma descriptors/ same descriptor with option of multi buffer handling. It was observed during tests that the driver was missing on data packets during the normal ping operations if the data buffers being used catered to jumbo frame handling. The memory barrriers are added in between preparation of dma descriptors in the jumbo frame handling path to ensure all instructions before enabling the dma are complete. Signed-off-by:
Deepak Sikri <deepak.sikri@st.com> Signed-off-by:
-
Deepak Sikri authored
It was observed that during multiple reboots nfs hangs. The status of receive descriptors shows that all the descriptors were in control of CPU, and none were assigned to DMA. Also the DMA status register confirmed that the Rx buffer is unavailable. This patch adds the fix for the same by adding the memory barriers to ascertain that the all instructions before enabling the Rx or Tx DMA are completed which involves the proper setting of the ownership bit in DMA descriptors. Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Emmanuel Grumbach authored
When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. Reported-by:
Paul Bolle <pebolle@tiscali.nl> Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
This is iwlegacy version of: commit 342bbf3f Author: Johannes Berg <johannes.berg@intel.com> Date: Sun Mar 4 08:50:46 2012 -0800 iwlwifi: always monitor for stuck queues If we only monitor while associated, the following can happen: - we're associated, and the queue stuck check runs, setting the queue "touch" time to X - we disassociate, stopping the monitoring, which leaves the time set to X - almost 2s later, we associate, and enqueue a frame - before the frame is transmitted, we monitor for stuck queues, and find the time set to X, although it is now later than X + 2000ms, so we decide that the queue is stuck and erroneously restart the device Cc: stable@vger.kernel.org Signed-off-by:
-
Stanislaw Gruszka authored
On rt2x00_dmastart() we increase index specified by Q_INDEX and on rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries between Q_INDEX_DONE and Q_INDEX are those we currently process in the hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can submit to the hardware. According to that fix rt2x00usb_kick_queue(), as we need to submit RX entries that are not processed by the hardware. It worked before only for empty queue, otherwise was broken. Note that for TX queues indexes ordering are ok. We need to kick entries that have filled skb, but was not submitted to the hardware, i.e. started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set. From practical standpoint this fixes RX queue stall, usually reproducible in AP mode, like for example reported here: https://bugzilla.redhat.com/show_bug.cgi?id=828824Reported-and-tested-by:
Franco Miceli <fmiceli@plan.ceibal.edu.uy> Reported-and-tested-by:
Tom Horsley <horsley1953@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Bing Zhao authored
> *. CID 709078: Resource leak (RESOURCE_LEAK) > - drivers/net/wireless/mwifiex/cfg80211.c, line: 935 > Assigning: "bss_cfg" = storage returned from "kzalloc(132UL, 208U)" > - but was not free > drivers/net/wireless/mwifiex/cfg80211.c:935 Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Eliad Peller authored
If association failed due to internal error (e.g. no supported rates IE), we call ieee80211_destroy_assoc_data() with assoc=true, while we actually reject the association. This results in the BSSID not being zeroed out. After passing assoc=false, we no longer have to call sta_info_destroy_addr() explicitly. While on it, move the "associated" message after the assoc_success check. Cc: stable@vger.kernel.org [3.4+] Signed-off-by:
Eliad Peller <eliad@wizery.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Sasha Levin authored
llcp_sock_getname can be called without a device attached to the nfc_llcp_sock. This would lead to the following BUG: [ 362.341807] BUG: unable to handle kernel NULL pointer dereference at (null) [ 362.341815] IP: [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0 [ 362.341818] PGD 31b35067 PUD 30631067 PMD 0 [ 362.341821] Oops: 0000 [#627] PREEMPT SMP DEBUG_PAGEALLOC [ 362.341826] CPU 3 [ 362.341827] Pid: 7816, comm: trinity-child55 Tainted: G D W 3.5.0-rc4-next-20120628-sasha-00005-g9f23eb7 #479 [ 362.341831] RIP: 0010:[<ffffffff836258e5>] [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0 [ 362.341832] RSP: 0018:ffff8800304fde88 EFLAGS: 00010286 [ 362.341834] RAX: 0000000000000000 RBX: ffff880033cb8000 RCX: 0000000000000001 [ 362.341835] RDX: ffff8800304fdec4 RSI: ffff8800304fdec8 RDI: ffff8800304fdeda [ 362.341836] RBP: ffff8800304fdea8 R08: 7ebcebcb772b7ffb R09: 5fbfcb9c35bdfd53 [ 362.341838] R10: 4220020c54326244 R11: 0000000000000246 R12: ffff8800304fdec8 [ 362.341839] R13: ffff8800304fdec4 R14: ffff8800304fdec8 R15: 0000000000000044 [ 362.341841] FS: 00007effa376e700(0000) GS:ffff880035a00000(0000) knlGS:0000000000000000 [ 362.341843] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 362.341844] CR2: 0000000000000000 CR3: 0000000030438000 CR4: 00000000000406e0 [ 362.341851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 362.341856] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 362.341858] Process trinity-child55 (pid: 7816, threadinfo ffff8800304fc000, task ffff880031270000) [ 362.341858] Stack: [ 362.341862] ffff8800304fdea8 ffff880035156780 0000000000000000 0000000000001000 [ 362.341865] ffff8800304fdf78 ffffffff83183b40 00000000304fdec8 0000006000000000 [ 362.341868] ffff8800304f0027 ffffffff83729649 ffff8800304fdee8 ffff8800304fdf48 [ 362.341869] Call Trace: [ 362.341874] [<ffffffff83183b40>] sys_getpeername+0xa0/0x110 [ 362.341877] [<ffffffff83729649>] ? _raw_spin_unlock_irq+0x59/0x80 [ 362.341882] [<ffffffff810f342b>] ? do_setitimer+0x23b/0x290 [ 362.341886] [<ffffffff81985ede>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 362.341889] [<ffffffff8372a539>] system_call_fastpath+0x16/0x1b [ 362.341921] Code: 84 00 00 00 00 00 b8 b3 ff ff ff 48 85 db 74 54 66 41 c7 04 24 27 00 49 8d 7c 24 12 41 c7 45 00 60 00 00 00 48 8b 83 28 05 00 00 <8b> 00 41 89 44 24 04 0f b6 83 41 05 00 00 41 88 44 24 10 0f b6 [ 362.341924] RIP [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0 [ 362.341925] RSP <ffff8800304fde88> [ 362.341926] CR2: 0000000000000000 [ 362.341928] ---[ end trace 6d450e935ee18bf3 ]--- Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Thomas Huehn authored
msp has type struct minstrel_ht_sta_priv not struct minstrel_ht_sta. (This incorporates the fixup originally posted as "mac80211: fix kzalloc memory corruption introduced in minstrel_ht". -- JWL) Reported-by:
Fengguang Wu <wfg@linux.intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Acked-by:
-
git://1984.lsi.us.es/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== * One to get the timeout special parameter for the SET target back working (this was introduced while trying to fix another bug in 3.4) from Jozsef Kadlecsik. * One crash fix if containers and nf_conntrack are used reported by Hans Schillstrom by myself. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
Hans reports that he's still hitting: BUG: unable to handle kernel NULL pointer dereference at 000000000000027c IP: [<ffffffff813615db>] netlink_has_listeners+0xb/0x60 PGD 0 Oops: 0000 [#3] PREEMPT SMP CPU 0 It happens when adding a number of containers with do: nfct_query(h, NFCT_Q_CREATE, ct); and most likely one namespace shuts down. this problem was supposed to be fixed by: 70e9942f netfilter: nf_conntrack: make event callback registration per-netns Still, it was missing one rcu_access_pointer to check if the callback is set or not. Reported-by:
Hans Schillstrom <hans@schillstrom.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Jozsef Kadlecsik authored
The patch "127f5591 netfilter: ipset: fix timeout value overflow bug" broke the SET target when no timeout was specified. Reported-by:
Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Michael Chan authored
commit c0357e97 bnx2: stop using net_device.{base_addr, irq}. removed netdev->base_addr so we need to update cnic to get the MMIO base address from pci_resource_start(). Otherwise, mmap of the uio device will fail. Signed-off-by:
-
Bjørn Mork authored
Adding a device with limited QMI support. It does not support normal QMI_WDS commands for connection management. Instead, sending a QMI_CTL SET_INSTANCE_ID command is required to enable the network interface: 01 0f 00 00 00 00 00 00 20 00 04 00 01 01 00 00 A number of QMI_DMS and QMI_NAS commands are also supported for optional device management. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Gao feng authored
we set max_prioidx to the first zero bit index of prioidx_map in function get_prioidx. So when we delete the low index netprio cgroup and adding a new netprio cgroup again,the max_prioidx will be set to the low index. when we set the high index cgroup's net_prio.ifpriomap,the function write_priomap will call update_netdev_tables to alloc memory which size is sizeof(struct netprio_map) + sizeof(u32) * (max_prioidx + 1), so the size of array that map->priomap point to is max_prioidx +1, which is low than what we actually need. fix this by adding check in get_prioidx,only set max_prioidx when max_prioidx low than the new prioidx. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
David Daney authored
With lockdep enabled we get: ============================================= [ INFO: possible recursive locking detected ] 3.4.4-Cavium-Octeon+ #313 Not tainted --------------------------------------------- kworker/u:1/36 is trying to acquire lock: (&bus->mdio_lock){+.+...}, at: [<ffffffff813da7e8>] mdio_mux_read+0x38/0xa0 but task is already holding lock: (&bus->mdio_lock){+.+...}, at: [<ffffffff813d79e4>] mdiobus_read+0x44/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bus->mdio_lock); lock(&bus->mdio_lock); *** DEADLOCK *** May be due to missing lock nesting notation . . . This is a false positive, since we are indeed using 'nested' locking, we need to use mutex_lock_nested(). Now in theory we can stack multiple MDIO multiplexers, but that would require passing the nesting level (which is difficult to know) to mutex_lock_nested(). Instead we assume the simple case of a single level of nesting. Since these are only warning messages, it isn't so important to solve the general case. Signed-off-by:David Daney <david.daney@cavium.com> Signed-off-by:
-
Alexander Duyck authored
DCB and SR-IOV cannot currently be enabled at the same time as the queueing schemes are incompatible. If they are both enabled it will result in Tx hangs since only the first Tx queue will be able to transmit any traffic. This simple fix for this is to block us from enabling TCs in ixgbe_setup_tc if SR-IOV is enabled. This change will be reverted once we can support SR-IOV and DCB coexistence. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Eric Dumazet authored
Fix two netem bugs : 1) When a frame was dropped by tfifo_enqueue(), drop counter was incremented twice. 2) When reordering is triggered, we enqueue a packet without checking queue limit. This can OOM pretty fast when this is repeated enough, since skbs are orphaned, no socket limit can help in this situation. Signed-off-by:
-
Cloud Ren authored
some people report atl1c could cause system hang with following kernel trace info: --------------------------------------- WARNING: at.../net/sched/sch_generic.c:258 dev_watchdog+0x1db/0x1d0() ... NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out ... --------------------------------------- This is caused by netif_stop_queue calling when cable Link is down. So remove netif_stop_queue, because link_watch will take it over. Signed-off-by:
xiong <xiong@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Cloud Ren <cjren@qca.qualcomm.com> Signed-off-by:
-
Eric Dumazet authored
commit a1c7fff7 (net: netdev_alloc_skb() use build_skb()) broke b44 on some 64bit machines. It appears b44 and b43 use __netdev_alloc_skb() instead of alloc_skb() for their bounce buffers. There is no need to add an extra NET_SKB_PAD reservation for bounce buffers : - In TX path, NET_SKB_PAD is useless - In RX path in b44, we force a copy of incoming frames if GFP_DMA allocations were needed. Reported-and-bisected-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Sasha Levin authored
Currently when sending data over datagram, the send function will attempt to allocate any size passed on from the userspace. We should make sure that this size is checked and limited. We'll limit it to the MTU of the device, which is checked later anyway. Signed-off-by:
-
- 05 Jul, 2012 1 commit
-
-
Simon Wunderlich authored
If the gateway functionality is used, some broadcast packets (DHCP requests) may be transmitted as unicast packets. As the bridge loop avoidance code now only considers the payload Ethernet destination, it may drop the DHCP request for clients which are claimed by other backbone gateways, because it falsely infers from the broadcast address that the right backbone gateway should havehandled the broadcast. Fix this by checking and delegating the batman-adv packet type used for transmission. Reported-by:
Guido Iribarren <guidoiribarren@buenosaireslibre.org> Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
-
- 04 Jul, 2012 3 commits
-
-
git://git.linaro.org/people/mturquette/linuxLinus Torvalds authored
Pull fix to common clk framework from Michael Turquette: "The previous set of common clk fixes for -rc5 left an uninitialized int which could lead to bad array indexing when switching clock parents. The issue is fixed with a trivial change to the code flow in __clk_set_parent." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: fix parent validation in __clk_set_parent()
-
git://neil.brown.name/mdLinus Torvalds authored
Pull raid10 build failure fix from NeilBrown: "I really shouldn't do important things late in the day. It seems that I get careless." * tag 'md-3.5-fixes' of git://neil.brown.name/md: md/raid10: fix careless build error
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking update from David Miller: 1) Fix RX sequence number handling in mwifiex, from Stone Piao. 2) Netfilter ipset mis-compares device names, fix from Florian Westphal. 3) Fix route leak in ipv6 IPVS, from Eric Dumazet. 4) NFS fixes. Several buffer overflows in NCI layer from Dan Rosenberg, and release sock OOPS'er fix from Eric Dumazet. 5) Fix WEP handling ath9k, we started using a bit the chip provides to indicate undecrypted packets but that bit turns out to be unreliable in certain configurations. Fix from Felix Fietkau. 6) Fix Kconfig dependency bug in wlcore, from Randy Dunlap. 7) New USB IDs for rtlwifi driver from Larry Finger. 8) Fix crashes in qmi_wwan usbnet driver when disconnecting, from Bjørn Mork. 9) Gianfar driver programs coalescing settings properly in single queue mode, but does not do so in multi-queue mode. Fix from Claudiu Manoil. 10) Missing module.h include in davinci_cpdma.c, from Daniel Mack. 11) Need dummy handler for IPSET_CMD_NONE otherwise we crash in ipset if we get this via nfnetlink, fix from Tomasz Bursztyka. 12) Missing RCU unlock in nfnetlink error path, also from Tomasz. 13) Fix divide by zero in igbvf when the user tries to set an RX coalescing value of 0 usecs, from Mitch A Williams. 14) We can process SCTP sacks for the wrong transport, oops. Fix from Neil Horman. 15) Remove hw IP payload checksumming from e1000e driver. This has zery value in our stack, and turning it on creates a very unintuitive restriction for users when using jumbo MTUs. Specifically, when IP payload checksums are on you cannot use both receive hashing offload and jumbo MTU. Fix from Bruce Allan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) e1000e: remove use of IP payload checksum sctp: be more restrictive in transport selection on bundled sacks igbvf: fix divide by zero netfilter: nfnetlink: fix missing rcu_read_unlock in nfnetlink_rcv_msg netfilter: ipset: fix crash if IPSET_CMD_NONE command is sent davinci_cpdma: include linux/module.h gianfar: Fix RXICr/TXICr programming for multi-queue mode net: Downgrade CAP_SYS_MODULE deprecated message from error to warning. net: qmi_wwan: fix Oops while disconnecting mwifiex: fix memory leak associated with IE manamgement ath9k: fix panic caused by returning a descriptor we have queued for reuse mac80211: correct behaviour on unrecognised action frames ath9k: enable serialize_regmode for non-PCIE AR9287 rtlwifi: rtl8192cu: New USB IDs NFC: Return from rawsock_release when sk is NULL iwlwifi: fix activating inactive stations wlcore: drop INET dependency ath9k: fix dynamic WEP related regression NFC: Prevent multiple buffer overflows in NCI netfilter: update location of my trees ...
-
- 03 Jul, 2012 1 commit
-
-
NeilBrown authored
build error introduced by commit b357f04a That function doesn't get extra args until a later patch. Bother. Reported-by: Fengguang Wu <wfg@linux.intel.com> Reported-by:
Simon Kirby <sim@hostway.ca> Reported-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by:
NeilBrown <neilb@suse.de>
-
