The QMC HDLC driver provides support for HDLC using the QMC (QUICC
Multichannel Controller) to transfer the HDLC data.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
ethtool: ice: Support for RSS settings to GTP

Takeru Hayasaka enables RSS functionality for GTP packets on ice driver
with ethtool.

A user can include TEID and make RSS work for GTP-U over IPv4 by doing the
following:`ethtool -N ens3 rx-flow-hash gtpu4 sde`

In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e,
gtpu(4|6)u, and gtpu(4|6)d.

gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does
not include a TEID.
gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that
includes a TEID.
gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios.
gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6.
gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended
header includes Uplink, applicable to both IPv4 and IPv6.
gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink,
for both IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Support Multi-PF netdev (Socket Direct)

This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.

We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.

The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.

We pick one device to be a primary (leader), and it fills a special
role.  The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.

Currently, we limit the support to PFs only, and up to two devices
(sockets).

* tag 'mlx5-socket-direct-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  Documentation: networking: Add description for multi-pf netdev
  net/mlx5: Enable SD feature
  net/mlx5e: Block TLS device offload on combined SD netdev
  net/mlx5e: Support per-mdev queue counter
  net/mlx5e: Support cross-vhca RSS
  net/mlx5e: Let channels be SD-aware
  net/mlx5e: Create EN core HW resources for all secondary devices
  net/mlx5e: Create single netdev per SD group
  net/mlx5: SD, Add debugfs
  net/mlx5: SD, Add informative prints in kernel log
  net/mlx5: SD, Implement steering for primary and secondaries
  net/mlx5: SD, Implement devcom communication and primary election
  net/mlx5: SD, Implement basic query and instantiation
  net/mlx5: SD, Introduce SD lib
  net/mlx5: Add MPIR bit in mcam_access_reg
====================

Link: https://lore.kernel.org/r/20240307084229.500776-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - hci_conn: Only do ACL connections sequentially
 - hci_core: Cancel request on command timeout
 - Remove CONFIG_BT_HS
 - btrtl: Add the support for RTL8852BT/RTL8852BE-VT
 - btusb: Add support Mediatek MT7920
 - btusb: Add new VID/PID 13d3/3602 for MT7925
 - Add new quirk for broken read key length on ATS2851

* tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (52 commits)
  Bluetooth: hci_sync: Fix UAF in hci_acl_create_conn_sync
  Bluetooth: Fix eir name length
  Bluetooth: ISO: Align broadcast sync_timeout with connection timeout
  Bluetooth: Add new quirk for broken read key length on ATS2851
  Bluetooth: mgmt: remove NULL check in add_ext_adv_params_complete()
  Bluetooth: mgmt: remove NULL check in mgmt_set_connectable_complete()
  Bluetooth: btusb: Add support Mediatek MT7920
  Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922
  Bluetooth: btnxpuart: Fix btnxpuart_close
  Bluetooth: ISO: Clean up returns values in iso_connect_ind()
  Bluetooth: fix use-after-free in accessing skb after sending it
  Bluetooth: af_bluetooth: Fix deadlock
  Bluetooth: bnep: Fix out-of-bound access
  Bluetooth: btusb: Fix memory leak
  Bluetooth: msft: Fix memory leak
  Bluetooth: hci_core: Fix possible buffer overflow
  Bluetooth: btrtl: fix out of bounds memory access
  Bluetooth: hci_h5: Add ability to allocate memory for private data
  Bluetooth: hci_sync: Fix overwriting request callback
  Bluetooth: hci_sync: Use QoS to determine which PHY to scan
  ...
====================

Link: https://lore.kernel.org/r/20240308181056.120547-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'ieee802154-for-net-next-2024-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next

Stefan Schmidt says:

====================
pull-request: ieee802154-next 2024-03-07

Various cross tree patches for ieee802154v drivers and a resource leak
fix for ieee802154 llsec.

Andy Shevchenko changed GPIO header usage for at86rf230 and mcr20a to
only include needed headers.

Bo Liu converted the at86rf230, mcr20a and mrf24j40 driver regmap
support to use the maple tree register cache.

Fedor Pchelkin fixed a resource leak in the llsec key deletion path.

Ricardo B. Marliere made wpan_phy_class const.

Tejun Heo removed WQ_UNBOUND from a workqueue call in ca8210.

* tag 'ieee802154-for-net-next-2024-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
  ieee802154: cfg802154: make wpan_phy_class constant
  ieee802154: mcr20a: Remove unused of_gpio.h
  ieee802154: at86rf230: Replace of_gpio.h by proper one
  mac802154: fix llsec key resources release in mac802154_llsec_key_del
  ieee802154: ca8210: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
  net: ieee802154: mrf24j40: convert to use maple tree register cache
  net: ieee802154: mcr20a: convert to use maple tree register cache
  net: ieee802154: at86rf230: convert to use maple tree register cache
====================

Link: https://lore.kernel.org/r/20240307195105.292085-1-stefan@datenfreihafen.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240308084458.2045266-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no point cloning an skb and having to free the clone
if the receive queue of the raw socket is full.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240307163020.2524409-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no point cloning an skb and having to free the clone
if the receive queue of the raw socket is full.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240307162943.2523817-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The only error that can happen during a nexthop dump is insufficient
space in the skb caring the netlink messages (EMSGSIZE). If this happens
and some messages were already filled in, the nexthop code returns the
skb length to signal the netlink core that more objects need to be
dumped.

After commit b5a89915 ("netlink: handle EMSGSIZE errors in the
core") there is no need to handle this error in the nexthop code as it
is now handled in the core.

Simplify the code and simply return the error to the core.

No regressions in nexthop tests:

 # ./fib_nexthops.sh
 Tests passed: 234
 Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240307154727.3555462-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to skb_unref(), add skb_data_unref() to save an expensive
atomic operation (and cache line dirtying) when last reference
on shinfo->dataref is released.

I saw this opportunity on hosts with RAW sockets accidentally
bound to UDP protocol, forcing an skb_clone() on all received packets.

These RAW sockets had their receive queue full, so all clone
packets were immediately dropped.

When UDP recvmsg() consumes later the original skb, skb_release_data()
is hitting atomic_sub_return() quite badly, because skb->clone
has been set permanently.

Note that this patch helps TCP TX performance, because
TCP stack also use (fast) clones.

This means that at least one of the two packets (the main skb or
its clone) will no longer have to perform this atomic operation
in skb_release_data().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240307123446.2302230-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.

Major changes:

rtw89
 * NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
 * NL80211_EXT_FEATURE_SET_SCAN_DWELL support

rtw88
 * support for more rtw8811cu and rtw8821cu devices

mt76
 * mt76x2u: add Netgear WNDA3100v3 USB
 * mt7915: newer ADIE version support
 * mt7925: radio temperature sensor support
 * mt7996: remove GCMP IGTK offload

* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
  wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
  wifi: rtw89: wow: set security engine options for 802.11ax chips only
  wifi: rtw89: update suspend/resume for different generation
  wifi: rtw89: wow: update config mac function with different generation
  wifi: rtw89: update DMA function with different generation
  wifi: rtw89: wow: update WoWLAN status register for different generation
  wifi: rtw89: wow: update WoWLAN reason register for different chips
  wifi: brcm80211: handle pmk_op allocation failure
  wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
  wifi: rtw89: coex: When Bluetooth not available don't set power/gain
  wifi: rtw89: coex: add return value to ensure H2C command is success or not
  wifi: rtw89: coex: Reorder H2C command index to align with firmware
  wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
  wifi: rtw89: coex: add init_info H2C command format version 7
  wifi: rtw89: 8922a: add coexistence helpers of SW grant
  wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
  wifi: cw1200: restore endian swapping
  wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
  wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
  wifi: rtw88: 8821c: Fix false alarm count
  ...
====================

Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes the following error caused by hci_conn being freed while
hcy_acl_create_conn_sync is pending:

==================================================================
BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0xa7/0x2e0
Write of size 2 at addr ffff888002ae0036 by task kworker/u3:0/848

CPU: 0 PID: 848 Comm: kworker/u3:0 Not tainted 6.8.0-rc6-g2ab3e8d6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38
04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
 <TASK>
 dump_stack_lvl+0x21/0x70
 print_report+0xce/0x620
 ? preempt_count_sub+0x13/0xc0
 ? __virt_addr_valid+0x15f/0x310
 ? hci_acl_create_conn_sync+0xa7/0x2e0
 kasan_report+0xdf/0x110
 ? hci_acl_create_conn_sync+0xa7/0x2e0
 hci_acl_create_conn_sync+0xa7/0x2e0
 ? __pfx_hci_acl_create_conn_sync+0x10/0x10
 ? __pfx_lock_release+0x10/0x10
 ? __pfx_hci_acl_create_conn_sync+0x10/0x10
 hci_cmd_sync_work+0x138/0x1c0
 process_one_work+0x405/0x800
 ? __pfx_lock_acquire+0x10/0x10
 ? __pfx_process_one_work+0x10/0x10
 worker_thread+0x37b/0x670
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x19b/0x1e0
 ? kthread+0xfe/0x1e0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2f/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30
 </TASK>

Allocated by task 847:
 kasan_save_stack+0x33/0x60
 kasan_save_track+0x14/0x30
 __kasan_kmalloc+0x8f/0xa0
 hci_conn_add+0xc6/0x970
 hci_connect_acl+0x309/0x410
 pair_device+0x4fb/0x710
 hci_sock_sendmsg+0x933/0xef0
 sock_write_iter+0x2c3/0x2d0
 do_iter_readv_writev+0x21a/0x2e0
 vfs_writev+0x21c/0x7b0
 do_writev+0x14a/0x180
 do_syscall_64+0x77/0x150
 entry_SYSCALL_64_after_hwframe+0x6c/0x74

Freed by task 847:
 kasan_save_stack+0x33/0x60
 kasan_save_track+0x14/0x30
 kasan_save_free_info+0x3b/0x60
 __kasan_slab_free+0xfa/0x150
 kfree+0xcb/0x250
 device_release+0x58/0xf0
 kobject_put+0xbb/0x160
 hci_conn_del+0x281/0x570
 hci_conn_hash_flush+0xfc/0x130
 hci_dev_close_sync+0x336/0x960
 hci_dev_close+0x10e/0x140
 hci_sock_ioctl+0x14a/0x5c0
 sock_ioctl+0x58a/0x5d0
 __x64_sys_ioctl+0x480/0xf60
 do_syscall_64+0x77/0x150
 entry_SYSCALL_64_after_hwframe+0x6c/0x74

Fixes: 45340097 ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

According to Section 1.2 of Core Specification Supplement Part A the
complete or short name strings are defined as utf8s, which should not
include the trailing NULL for variable length array as defined in Core
Specification Vol1 Part E Section 2.9.3.

Removing the trailing NULL allows PTS to retrieve the random address based
on device name, e.g. for SM/PER/KDU/BV-02-C, SM/PER/KDU/BV-08-C or
GAP/BROB/BCST/BV-03-C.

Fixes: f61851f6 ("Bluetooth: Fix append max 11 bytes of name to scan rsp data")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver

There are some bugfix for the HNS3 ethernet driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add checking for vf id of mailbox, in order to avoid array
out-of-bounds risk.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool,  so it may cause the user
configuration dropped after reset.

To fix it, don't change the duplex mode when resetting.

Fixes: 2d03eacc ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cmdq reset command times out when all VFs are enabled and the queue is
full. The hardware processing time exceeds the timeout set by the driver.
In order to avoid the above extreme situations, the driver extends the
reset timeout to 1 second.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the tc is removed during reset, hns3 driver will return a errcode.
But kernel ignores this errcode, As a result,
the driver status is inconsistent with the kernel status.

This patch retains the deletion status when the deletion fails
and continues to delete after the reset to ensure that
the status of the driver is consistent with that of kernel.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL, but the hardware can receive 1588 messages,
and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the
access of hdev->ptp->flags will cause a kernel crash:

[ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
[ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge]
[ 5889.279101] sp : ffff800012c3bc50
[ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040
[ 5889.289927] x27: ffff800009116484 x26: 0000000080007500
[ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000
[ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000
[ 5889.309134] x21: 0000000000000000 x20: ffff204004220080
[ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000
[ 5889.321897] x17: 0000000000000000 x16: 0000000000000000
[ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000
[ 5889.334617] x13: 0000000000000000 x12: 00000000010011df
[ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000
[ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d
[ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480
[ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000
[ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000
[ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080
[ 5889.378857] Call trace:
[ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3]
[ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3]
[ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3]
[ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3]
[ 5889.411084] napi_poll+0xcc/0x264
[ 5889.415329] net_rx_action+0xd4/0x21c
[ 5889.419911] __do_softirq+0x130/0x358
[ 5889.424484] irq_exit+0x134/0x154
[ 5889.428700] __handle_domain_irq+0x88/0xf0
[ 5889.433684] gic_handle_irq+0x78/0x2c0
[ 5889.438319] el1_irq+0xb8/0x140
[ 5889.442354] arch_cpu_idle+0x18/0x40
[ 5889.446816] default_idle_call+0x5c/0x1c0
[ 5889.451714] cpuidle_idle_call+0x174/0x1b0
[ 5889.456692] do_idle+0xc8/0x160
[ 5889.460717] cpu_startup_entry+0x30/0xfc
[ 5889.465523] secondary_start_kernel+0x158/0x1ec
[ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80)
[ 5889.477950] SMP: stopping secondary CPUs
[ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95
[ 5890.522951] Starting crashdump kernel...

Fixes: 0bf5eb78 ("net: hns3: add support for PTP")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the hilink version is H60, the serdes serial loopback test is not
supported. This patch add hilink version detection. When the version
is H60, the serdes serial loopback test will be disable.
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hisilicon device now supports a new 200G link interface,
which query from firmware in a new bit. Therefore,
the HCLGE_SUPPORT_200G_R4_BIT capability bit has been added.
The HCLGE_SUPPORT_200G_BIT has been renamed as
HCLGE_SUPPORT_200G_R4_EXT_BIT, and the firmware has
extended support for this mode.

Fixes: ae6f010c ("net: hns3: add support for 200G device")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In hns3_dcbnl_ieee_delapp, should check ieee_delapp not ieee_setapp.
This path fix the wrong judgment.

Fixes: 0ba22bcb ("net: hns3: add support config dscp map to tc")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: putting ionic on a diet

Building on the performance work done in the previous patchset
    [Link] https://lore.kernel.org/netdev/20240229193935.14197-1-shannon.nelson@amd.com/
this patchset puts the ionic driver on a diet, decreasing the memory
requirements per queue, and simplifies a few more bits of logic.

We trimmed the queue management structs and gained some ground, but
the most savings came from trimming the individual buffer descriptors.
The original design used a single generic buffer descriptor for Tx, Rx and
Adminq needs, but the Rx and Adminq descriptors really don't need all the
info that the Tx descriptors track.  By splitting up the descriptor types
we can significantly reduce the descriptor sizes for Rx and Adminq use.

There is a small reduction in the queue management structs, saving about
3 cachelines per queuepair:

    ionic_qcq:
	Before:	/* size: 2176, cachelines: 34, members: 23 */
	After:	/* size: 2048, cachelines: 32, members: 23 */

We also remove an array of completion descriptor pointers, or about
8 Kbytes per queue.

But the biggest savings came from splitting the desc_info struct into
queue specific structs and trimming out what was unnecessary.

    Before:
	ionic_desc_info:
		/* size: 496, cachelines: 8, members: 10 */
    After:
	ionic_tx_desc_info:
		/* size: 496, cachelines: 8, members: 6 */
	ionic_rx_desc_info:
		/* size: 224, cachelines: 4, members: 2 */
	ionic_admin_desc_info:
		/* size: 8, cachelines: 1, members: 1 */

In a 64 core host the ionic driver will default to 64 queuepairs of
1024 descriptors for Rx, 1024 for Tx, and 80 for Adminq and Notifyq.

The total memory usage for 64 queues:
    Before:
	  65 * sizeof(ionic_qcq)			   141,440
	+ 64 * 1024 * sizeof(ionic_desc_info)		32,505,856
	+ 64 * 1024 * sizeof(ionic_desc_info)		32,505,856
	+ 64 * 1024 * 2 * sizeof(ionic_qc_info)		    16,384
	+  1 *   80 * sizeof(ionic_desc_info)		    39,690
							----------
							65,201,038

    After:
	  65 * sizeof(ionic_qcq)			   133,120
	+ 64 * 1024 * sizeof(ionic_tx_desc_info)	32,505,856
	+ 64 * 1024 * sizeof(ionic_rx_desc_info)	14,680,064
	+                           (removed)		         0
	+  1 *   80 * sizeof(ionic_admin desc_info)	       640
							----------
							47,319,680

This saves us approximately 18 Mbytes per port in a 64 core machine,
a 28% savings in our memory needs.

In addition, this improves our simple single thread / single queue
iperf case on a 9100 MTU connection from 86.7 to 95 Gbits/sec.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When possible, keep the stats struct references strictly
in the error handling blocks and out of the fastpath.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix up a couple of small dma_addr handling issues
  - don't double-count dma-map-err stat in ionic_tx_map_skb()
    or ionic_xdp_post_frame()
  - return 0 on error from both ionic_tx_map_single() and
    ionic_tx_map_frag() and check for !dma_addr in ionic_tx_map_skb()
    and ionic_xdp_post_frame()
  - be sure to unmap buf_info[0] in ionic_tx_map_skb() error path
  - don't assign rx buf->dma_addr until error checked in ionic_rx_page_alloc()
  - remove unnecessary dma_addr_t casts
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We call ionic_rx_page_alloc() only on existing buf_info structs from
ionic_rx_fill().  There's no need for the additional NULL test.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A simple change to the struct ionic_queue layout removes some
unnecessary padding and saves us a cacheline in the struct
ionic_qcq layout.

    struct ionic_queue {
	Before: /* size: 256, cachelines: 4, members: 29 */
	After:  /* size: 192, cachelines: 3, members: 29 */

    struct ionic_qcq {
	Before: /* size: 2112, cachelines: 33, members: 23 */
	After:  /* size: 2048, cachelines: 32, members: 23 */
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rearange a few fields for better cache use and to put the
flags field up into the first cacheline rather than the last.

    struct ionic_qcq
	Before: /* size: 2176, cachelines: 34, members: 23 */
	After:  /* size: 2112, cachelines: 33, members: 23 */
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the idev field from ionic_queue, which saves us a
bit of space, and add it into ionic_cq where there's room
within some cacheline padding.  Use this pointer rather
than doing a multi level reference from lif->ionic.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing ionic_rx_frags() code is a bit of a mess and can
be cleaned up by unrolling the first frag/header setup from
the loop, then reworking the do-while-loop into a for-loop.  We
rename the function to a more descriptive ionic_rx_build_skb().
We also change a couple of related variable names for readability.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the AdminQ clean is a simple action called from only
one place, fold it back into the service routine.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make desc_info structure specific to the queue type, which
allows us to cut down the Rx and AdminQ descriptor sizes by
not including all the fields needed for the Tx desriptors.

Before:
    struct ionic_desc_info {
	/* size: 464, cachelines: 8, members: 6 */

After:
    struct ionic_tx_desc_info {
	/* size: 464, cachelines: 8, members: 6 */
    struct ionic_rx_desc_info {
	/* size: 224, cachelines: 4, members: 2 */
    struct ionic_admin_desc_info {
	/* size: 8, cachelines: 1, members: 1 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With a little simple math we don't need another struct array to
find the completion structs, so we can remove the ionic_cq_info
altogether.  This doesn't really save anything in the ionic_cq
since it gets padded out to the cacheline, but it does remove
the parallel array allocation of 8 * num_descriptors, or about
8 Kbytes per queue in a default configuration.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By reworking the queue service routines to have their own
servicing loops we can remove the cb pointer from desc_info
to save another 8 bytes per descriptor,

This simplifies some of the queue handling indirection and makes
the code a little easier to follow, and keeps service code in
one place rather than jumping between code files.

   struct ionic_desc_info
	Before:  /* size: 472, cachelines: 8, members: 7 */
	After:   /* size: 464, cachelines: 8, members: 6 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the AdminQ and NotifyQ queue handling to ionic_main.c with
the rest of the adminq code.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we're not using desc_info pointers mapped in every q
we can simplify and drop the unnecessary utility functions.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the struct pointers from desc_info to use less space.
Instead of pointers in every desc_info to its descriptor,
we can use the queue descriptor index to find the individual
desc, desc_info, and sgl structs in their parallel arrays.

   struct ionic_desc_info
	Before:  /* size: 496, cachelines: 8, members: 10 */
	After:   /* size: 472, cachelines: 8, members: 7 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-06 (iavf, i40e, ixgbe)

This series contains updates to iavf, i40e, and ixgbe drivers.

Alexey Kodanev removes duplicate calls related to cloud filters on iavf
and unnecessary null checks on i40e.

Maciej adds helper functions for common code relating to updating
statistics for ixgbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff was retired as the Intel driver maintainer in
commit 6667df91 ("MAINTAINERS: Update MAINTAINERS for
Intel ethernet drivers"), and his address bounces.
But he has signed-off a lot of patches over the years
so get_maintainer insists on CCing him.

We haven't heard from him since he left Intel, so remapping
the address via mailmap is also pointless. Add to ignored
addresses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
ipv6: lockless inet6_dump_addr()

This series removes RTNL locking to dump ipv6 addresses.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>