Skip to content

L
linux
Switch branch/tag
  1. 01 Oct, 2022 3 commits
    • Jinke Han's avatar
      ext4: place buffer head allocation before handle start · d1052d23
      Jinke Han authored 
      In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.

One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.

Cc: stable@kernel.org
Signed-off-by: default avatarJinke Han <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.comSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      d1052d23
    • Zhang Yi's avatar
      ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate · 0b73284c
      Zhang Yi authored 
      Recently we notice that ext4 filesystem would occasionally fail to read
metadata from disk and report error message, but the disk and block
layer looks fine. After analyse, we lockon commit 88dbcbb3
("blkdev: avoid migration stalls for blkdev pages"). It provide a
migration method for the bdev, we could move page that has buffers
without extra users now, but it lock the buffers on the page, which
breaks the fragile metadata read operation on ext4 filesystem,
ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the
assumption of that locked buffer means it is under IO. So it just
trylock the buffer and skip submit IO if it lock failed, after
wait_on_buffer() we conclude IO error because the buffer is not
uptodate.

This issue could be easily reproduced by add some delay just after
buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do
fsstress on ext4 filesystem.

  EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193:
  comm fsstress: reading directory lblock 0
  EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334:
  comm fsstress: reading directory lblock 0

Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock
the buffer and submit IO if it's not uptodate, and also leave over
readahead helper.

Cc: stable@kernel.org
Signed-off-by: default avatarZhang Yi <yi.zhang@huawei.com>
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220831074629.3755110-1-yi.zhang@huawei.comSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      0b73284c
    • Jeff Layton's avatar
      ext4: unconditionally enable the i_version counter · 1ff20307
      Jeff Layton authored 
      The original i_version implementation was pretty expensive, requiring a
log flush on every change. Because of this, it was gated behind a mount
option (implemented via the MS_I_VERSION mountoption flag).

Commit ae5e165d (fs: new API for handling inode->i_version) made the
i_version flag much less expensive, so there is no longer a performance
penalty from enabling it. xfs and btrfs already enable it
unconditionally when the on-disk format can support it.

Have ext4 ignore the SB_I_VERSION flag, and just enable it
unconditionally.  While we're in here, mark the i_version mount
option Opt_removed.

[ Removed leftover bits of i_version from ext4_apply_options() since it
  now can't ever be set in ctx->mask_s_flags -- lczerner ]

Cc: stable@kernel.org
Cc: Dave Chinner <david@fromorbit.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: default avatarJeff Layton <jlayton@kernel.org>
Signed-off-by: default avatarLukas Czerner <lczerner@redhat.com>
Reviewed-by: default avatarChristian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220824160349.39664-3-lczerner@redhat.comSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      1ff20307
  3. 30 Sep, 2022 8 commits
  5. 29 Sep, 2022 4 commits
  7. 27 Sep, 2022 2 commits
    • Eric Whitney's avatar
      ext4: minor defrag code improvements · d412df53
      Eric Whitney authored 
      Modify the error returns for two file types that can't be defragged to
more clearly communicate those restrictions to a caller.  When the
defrag code is applied to swap files, return -ETXTBSY, and when applied
to quota files, return -EOPNOTSUPP.  Move an extent tree search whose
results are only occasionally required to the site always requiring them
for improved efficiency.  Address a few typos.
Signed-off-by: default avatarEric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220722163910.268564-1-enwlinux@gmail.comSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      d412df53
    • Jerry Lee 李修賢's avatar
      ext4: continue to expand file system when the target size doesn't reach · df3cb754
      Jerry Lee 李修賢 authored 
      When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.

=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.

[  865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[  970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296

=== after ===
[  129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[  143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[  198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[  207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[  207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[  207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[  221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[  227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696
Signed-off-by: default avatarJerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.comSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      df3cb754
  9. 26 Sep, 2022 1 commit
  11. 22 Sep, 2022 7 commits
    • Theodore Ts'o's avatar
      ext4: limit the number of retries after discarding preallocations blocks · 80fa46d6
      Theodore Ts'o authored 
      This patch avoids threads live-locking for hours when a large number
threads are competing over the last few free extents as they blocks
getting added and removed from preallocation pools.  From our bug
reporter:

   A reliable way for triggering this has multiple writers
   continuously write() to files when the filesystem is full, while
   small amounts of space are freed (e.g. by truncating a large file
   -1MiB at a time). In the local filesystem, this can be done by
   simply not checking the return code of write (0) and/or the error
   (ENOSPACE) that is set. Over NFS with an async mount, even clients
   with proper error checking will behave this way since the linux NFS
   client implementation will not propagate the server errors [the
   write syscalls immediately return success] until the file handle is
   closed. This leads to a situation where NFS clients send a
   continuous stream of WRITE rpcs which result in ERRNOSPACE -- but
   since the client isn't seeing this, the stream of writes continues
   at maximum network speed.

   When some space does appear, multiple writers will all attempt to
   claim it for their current write. For NFS, we may see dozens to
   hundreds of threads that do this.

   The real-world scenario of this is database backup tooling (in
   particular, github.com/mdkent/percona-xtrabackup) which may write
   large files (>1TiB) to NFS for safe keeping. Some temporary files
   are written, rewound, and read back -- all before closing the file
   handle (the temp file is actually unlinked, to trigger automatic
   deletion on close/crash.) An application like this operating on an
   async NFS mount will not see an error code until TiB have been
   written/read.

   The lockup was observed when running this database backup on large
   filesystems (64 TiB in this case) with a high number of block
   groups and no free space. Fragmentation is generally not a factor
   in this filesystem (~thousands of large files, mostly contiguous
   except for the parts written while the filesystem is at capacity.)
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
      80fa46d6
    • Luís Henriques's avatar
      ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0 · 29a5b8a1
      Luís Henriques authored 
      When walking through an inode extents, the ext4_ext_binsearch_idx() function
assumes that the extent header has been previously validated.  However, there
are no checks that verify that the number of entries (eh->eh_entries) is
non-zero when depth is > 0.  And this will lead to problems because the
EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this:

[  135.245946] ------------[ cut here ]------------
[  135.247579] kernel BUG at fs/ext4/extents.c:2258!
[  135.249045] invalid opcode: 0000 [#1] PREEMPT SMP
[  135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4
[  135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[  135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0
[  135.256475] Code:
[  135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246
[  135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023
[  135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c
[  135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c
[  135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024
[  135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000
[  135.272394] FS:  00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
[  135.274510] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0
[  135.277952] Call Trace:
[  135.278635]  <TASK>
[  135.279247]  ? preempt_count_add+0x6d/0xa0
[  135.280358]  ? percpu_counter_add_batch+0x55/0xb0
[  135.281612]  ? _raw_read_unlock+0x18/0x30
[  135.282704]  ext4_map_blocks+0x294/0x5a0
[  135.283745]  ? xa_load+0x6f/0xa0
[  135.284562]  ext4_mpage_readpages+0x3d6/0x770
[  135.285646]  read_pages+0x67/0x1d0
[  135.286492]  ? folio_add_lru+0x51/0x80
[  135.287441]  page_cache_ra_unbounded+0x124/0x170
[  135.288510]  filemap_get_pages+0x23d/0x5a0
[  135.289457]  ? path_openat+0xa72/0xdd0
[  135.290332]  filemap_read+0xbf/0x300
[  135.291158]  ? _raw_spin_lock_irqsave+0x17/0x40
[  135.292192]  new_sync_read+0x103/0x170
[  135.293014]  vfs_read+0x15d/0x180
[  135.293745]  ksys_read+0xa1/0xe0
[  135.294461]  do_syscall_64+0x3c/0x80
[  135.295284]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

This patch simply adds an extra check in __ext4_ext_check(), verifying that
eh_entries is not 0 when eh_depth is > 0.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283
Cc: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Signed-off-by: default avatarLuís Henriques <lhenriques@suse.de>
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Reviewed-by: default avatarBaokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20220822094235.2690-1-lhenriques@suse.deSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      29a5b8a1
    • Jan Kara's avatar
      ext4: use buckets for cr 1 block scan instead of rbtree · 83e80a6e
      Jan Kara authored 
      Using rbtree for sorting groups by average fragment size is relatively
expensive (needs rbtree update on every block freeing or allocation) and
leads to wide spreading of allocations because selection of block group
is very sentitive both to changes in free space and amount of blocks
allocated. Furthermore selecting group with the best matching average
fragment size is not necessary anyway, even more so because the
variability of fragment sizes within a group is likely large so average
is not telling much. We just need a group with large enough average
fragment size so that we have high probability of finding large enough
free extent and we don't want average fragment size to be too big so
that we are likely to find free extent only somewhat larger than what we
need.

So instead of maintaing rbtree of groups sorted by fragment size keep
bins (lists) or groups where average fragment size is in the interval
[2^i, 2^(i+1)). This structure requires less updates on block allocation
/ freeing, generally avoids chaotic spreading of allocations into block
groups, and still is able to quickly (even faster that the rbtree)
provide a block group which is likely to have a suitably sized free
space extent.

This patch reduces number of block groups used when untarring archive
with medium sized files (size somewhat above 64k which is default
mballoc limit for avoiding locality group preallocation) to about half
and thus improves write speeds for eMMC flash significantly.

Fixes: 196e402a ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarOjaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Reviewed-by: default avatarRitesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.czSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      83e80a6e
    • Jan Kara's avatar
      ext4: use locality group preallocation for small closed files · a9f2a293
      Jan Kara authored 
      Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.

Fixes: 196e402a ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarOjaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: default avatarRitesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.czSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      a9f2a293
    • Jan Kara's avatar
      ext4: make directory inode spreading reflect flexbg size · 613c5a85
      Jan Kara authored 
      Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.
Tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarOjaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/Signed-off-by: default avatarJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.czSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      613c5a85
    • Jan Kara's avatar
      ext4: avoid unnecessary spreading of allocations among groups · 1940265e
      Jan Kara authored 
      mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.

Fixes: 196e402a ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarOjaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: default avatarRitesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.czSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      1940265e
    • Jan Kara's avatar
      ext4: make mballoc try target group first even with mb_optimize_scan · 4fca50d4
      Jan Kara authored 
      One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:

                     baseline               mb_optimize_scan
Hmean     disk-1       2114.16 (   0.00%)     2099.37 (  -0.70%)
Hmean     disk-41     87794.43 (   0.00%)    83787.47 *  -4.56%*
Hmean     disk-81    148170.73 (   0.00%)   135527.05 *  -8.53%*
Hmean     disk-121   177506.11 (   0.00%)   166284.93 *  -6.32%*
Hmean     disk-161   220951.51 (   0.00%)   207563.39 *  -6.06%*
Hmean     disk-201   208722.74 (   0.00%)   203235.59 (  -2.63%)
Hmean     disk-241   222051.60 (   0.00%)   217705.51 (  -1.96%)
Hmean     disk-281   252244.17 (   0.00%)   241132.72 *  -4.41%*
Hmean     disk-321   255844.84 (   0.00%)   245412.84 *  -4.08%*

Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.

Fix the problem by making sure we try goal group first.

Fixes: 196e402a ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarOjaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: default avatarRitesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/Signed-off-by: default avatarJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.czSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      4fca50d4
  13. 04 Sep, 2022 5 commits
    • Linus Torvalds's avatar
      Linux 6.0-rc4 · 7e18e42e
      Linus Torvalds authored
      7e18e42e
    • Linus Torvalds's avatar
      Merge tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 59954972
      Linus Torvalds authored 
      Pull powerpc fixes from Michael Ellerman:

 - Fix handling of PCI domains in /proc on 32-bit systems using the
   recently added support for numbering buses from zero for each domain.

 - A fix and a revert for some changes to use READ/WRITE_ONCE() which
   caused problems with KASAN enabled due to sanitisation calls being
   introduced in low-level paths that can't cope with it.

 - Fix build errors on 32-bit caused by the syscall table being
   misaligned sometimes.

 - Two fixes to get IBM Cell native machines booting again, which had
   bit-rotted while my QS22 was temporarily out of action.

 - Fix the papr_scm driver to not assume the order of events returned by
   the hypervisor is stable, and a related compile fix.

Thanks to Aneesh Kumar K.V, Christophe Leroy, Jordan Niethe, Kajol Jain,
Masahiro Yamada, Nathan Chancellor, Pali Rohár, Vaibhav Jain, and Zhouyi
Zhou.

* tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Ensure rc is always initialized in papr_scm_pmu_register()
  Revert "powerpc/irq: Don't open code irq_soft_mask helpers"
  powerpc: Fix hard_irq_disable() with sanitizer
  powerpc/rtas: Fix RTAS MSR[HV] handling for Cell
  Revert "powerpc: Remove unused FW_FEATURE_NATIVE references"
  powerpc: align syscall table for ppc32
  powerpc/pci: Enable PCI domains in /proc when PCI bus numbers are not unique
  powerpc/papr_scm: Fix nvdimm event mappings
      59954972
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 685ed983
      Linus Torvalds authored 
      Pull kvm fixes from Paolo Bonzini:
 "s390:

   - PCI interpretation compile fixes

  RISC-V:

   - fix unused variable warnings in vcpu_timer.c

   - move extern sbi_ext declarations to a header

  x86:

   - check validity of argument to KVM_SET_MP_STATE

   - use guest's global_ctrl to completely disable guest PEBS

   - fix a memory leak on memory allocation failure

   - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES

   - fix build failure with Clang integrated assembler

   - fix MSR interception

   - always flush TLBs when enabling dirty logging"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: check validity of argument to KVM_SET_MP_STATE
  perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
  KVM: x86: fix memoryleak in kvm_arch_vcpu_create()
  KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
  KVM: s390: pci: Hook to access KVM lowlevel from VFIO
  riscv: kvm: move extern sbi_ext declarations to a header
  riscv: kvm: vcpu_timer: fix unused variable warnings
  KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE()
  KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang
  KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()
  kvm: x86: mmu: Always flush TLBs when enabling dirty logging
  kvm: x86: mmu: Drop the need_remote_flush() function
      685ed983
    • Nick Desaulniers's avatar
      Makefile.extrawarn: re-enable -Wformat for clang; take 2 · b0839b28
      Nick Desaulniers authored 
      -Wformat was recently re-enabled for builds with clang, then quickly
re-disabled, due to concerns stemming from the frequency of default
argument promotion related warning instances.

commit 258fafcd ("Makefile.extrawarn: re-enable -Wformat for clang")
commit 21f9c8a1 ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"")

ISO WG14 has ratified N2562 to address default argument promotion
explicitly for printf, as part of the upcoming ISO C2X standard.

The behavior of clang was changed in clang-16 to not warn for the cited
cases in all language modes.

Add a version check, so that users of clang-16 now get the full effect
of -Wformat. For older clang versions, re-enable flags under the
-Wformat group that way users still get some useful checks related to
format strings, without noisy default argument promotion warnings. I
intentionally omitted -Wformat-y2k and -Wformat-security from being
re-enabled, which are also part of -Wformat in clang-16.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://github.com/llvm/llvm-project/issues/57102
Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdfSuggested-by: default avatarJustin Stitt <jstitt007@gmail.com>
Suggested-by: default avatarNathan Chancellor <nathan@kernel.org>
Suggested-by: default avatarYoungmin Nam <youngmin.nam@samsung.com>
Signed-off-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
Reviewed-by: default avatarNathan Chancellor <nathan@kernel.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b0839b28
    • Linus Torvalds's avatar
      Merge tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux · 7726d4c3
      Linus Torvalds authored 
      Pull gpio fixes from Bartosz Golaszewski:
 "A a set of fixes from the GPIO subsystem.

  Most are small driver fixes except the realtek-otto driver patch which
  is pretty big but addresses a significant flaw that can cause the CPU
  to stay infinitely busy on uncleared ISR on some platforms.

  Summary:
   - MAINTAINERS update
   - fix resource leaks in gpio-mockup and gpio-pxa
   - add missing locking in gpio-pca953x
   - use 32-bit I/O in gpio-realtek-otto
   - make irq_chip structures immutable in four more drivers"

* tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ws16c48: Make irq_chip immutable
  gpio: 104-idio-16: Make irq_chip immutable
  gpio: 104-idi-48: Make irq_chip immutable
  gpio: 104-dio-48e: Make irq_chip immutable
  gpio: realtek-otto: switch to 32-bit I/O
  gpio: pca953x: Add mutex_lock for regcache sync in PM
  gpio: mockup: remove gpio debugfs when remove device
  gpio: pxa: use devres for the clock struct
  MAINTAINERS: rectify entry for XILINX GPIO DRIVER
      7726d4c3
  15. 03 Sep, 2022 10 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7