Fix build errors when CONFIG_NET is not enabled by making the driver
depend on NET.
Also correct the loadable module name.

ERROR: "__netdev_alloc_skb" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "netif_rx" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "netif_tx_wake_queue" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "free_netdev" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "register_netdev" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "kfree_skb" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "alloc_netdev_mqs" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "eth_type_trans" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "ether_setup" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "unregister_netdev" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "skb_put" [drivers/staging/most/aim-network/aim_network.ko] undefined!
ERROR: "eth_mac_addr" [drivers/staging/most/aim-network/aim_network.ko] undefined!
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: Michael Fabry <Michael.Fabry@microchip.com>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes passing of a potential null pointer.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the dereferencing of freed memory.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch prevents snprintf from exceeding a given buffer size.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove semicolon at the end of define statement to fix checkpatch warning.
WARNING: macros should not use a trailing semicolon
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the iio and other fixes in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull perf fix from Thomas Gleixner:
 "A single fix for the intel cqm perf facility to prevent IPIs from
  interrupt context"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/cqm: Return cached counter value from IRQ context

Pull x86 fixes from Thomas Gleixner:
 "This update contains:

   - the manual revert of the SYSCALL32 changes which caused a
     regression

   - a fix for the MPX vma handling

   - three fixes for the ioremap 'is ram' checks.

   - PAT warning fixes

   - a trivial fix for the size calculation of TLB tracepoints

   - handle old EFI structures gracefully

  This also contains a PAT fix from Jan plus a revert thereof.  Toshi
  explained why the code is correct"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pat: Revert 'Adjust default caching mode translation tables'
  x86/asm/entry/32: Revert 'Do not use R9 in SYSCALL32' commit
  x86/mm: Fix newly introduced printk format warnings
  mm: Fix bugs in region_is_ram()
  x86/mm: Remove region_is_ram() call from ioremap
  x86/mm: Move warning from __ioremap_check_ram() to the call site
  x86/mm/pat, drivers/media/ivtv: Move the PAT warning and replace WARN() with pr_warn()
  x86/mm/pat, drivers/infiniband/ipath: Replace WARN() with pr_warn()
  x86/mm/pat: Adjust default caching mode translation tables
  x86/fpu: Disable dependent CPU features on "noxsave"
  x86/mpx: Do not set ->vm_ops on MPX VMAs
  x86/mm: Add parenthesis for TLB tracepoint size calculation
  efi: Handle memory error structures produced based on old versions of standard

Toshi explains:

"No, the default values need to be set to the fallback types,
 i.e. minimal supported mode.  For WC and WT, UC is the fallback type.

 When PAT is disabled, pat_init() does update the tables below to
 enable WT per the default BIOS setup.  However, when PAT is enabled,
 but CPU has PAT -errata, WT falls back to UC per the default values."

Revert: ca1fec58 'x86/mm/pat: Adjust default caching mode translation tables'
Requested-by: Toshi Kani <toshi.kani@hp.com>
Cc: Jan Beulich <jbeulich@suse.de>
Link: http://lkml.kernel.org/r/1437577776.3214.252.camel@hp.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Peter reported the following potential crash which I was able to
reproduce with his test program,

[  148.765788] ------------[ cut here ]------------
[  148.765796] WARNING: CPU: 34 PID: 2840 at kernel/smp.c:417 smp_call_function_many+0xb6/0x260()
[  148.765797] Modules linked in:
[  148.765800] CPU: 34 PID: 2840 Comm: perf Not tainted 4.2.0-rc1+ #4
[  148.765803]  ffffffff81cdc398 ffff88085f105950 ffffffff818bdfd5 0000000000000007
[  148.765805]  0000000000000000 ffff88085f105990 ffffffff810e413a 0000000000000000
[  148.765807]  ffffffff82301080 0000000000000022 ffffffff8107f640 ffffffff8107f640
[  148.765809] Call Trace:
[  148.765810]  <NMI>  [<ffffffff818bdfd5>] dump_stack+0x45/0x57
[  148.765818]  [<ffffffff810e413a>] warn_slowpath_common+0x8a/0xc0
[  148.765822]  [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60
[  148.765824]  [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60
[  148.765825]  [<ffffffff810e422a>] warn_slowpath_null+0x1a/0x20
[  148.765827]  [<ffffffff811613f6>] smp_call_function_many+0xb6/0x260
[  148.765829]  [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60
[  148.765831]  [<ffffffff81161748>] on_each_cpu_mask+0x28/0x60
[  148.765832]  [<ffffffff8107f6ef>] intel_cqm_event_count+0x7f/0xe0
[  148.765836]  [<ffffffff811cdd35>] perf_output_read+0x2a5/0x400
[  148.765839]  [<ffffffff811d2e5a>] perf_output_sample+0x31a/0x590
[  148.765840]  [<ffffffff811d333d>] ? perf_prepare_sample+0x26d/0x380
[  148.765841]  [<ffffffff811d3497>] perf_event_output+0x47/0x60
[  148.765843]  [<ffffffff811d36c5>] __perf_event_overflow+0x215/0x240
[  148.765844]  [<ffffffff811d4124>] perf_event_overflow+0x14/0x20
[  148.765847]  [<ffffffff8107e7f4>] intel_pmu_handle_irq+0x1d4/0x440
[  148.765849]  [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0
[  148.765853]  [<ffffffff81219bad>] ? vunmap_page_range+0x19d/0x2f0
[  148.765854]  [<ffffffff81219d11>] ? unmap_kernel_range_noflush+0x11/0x20
[  148.765859]  [<ffffffff814ce6fe>] ? ghes_copy_tofrom_phys+0x11e/0x2a0
[  148.765863]  [<ffffffff8109e5db>] ? native_apic_msr_write+0x2b/0x30
[  148.765865]  [<ffffffff8109e44d>] ? x2apic_send_IPI_self+0x1d/0x20
[  148.765869]  [<ffffffff81065135>] ? arch_irq_work_raise+0x35/0x40
[  148.765872]  [<ffffffff811c8d86>] ? irq_work_queue+0x66/0x80
[  148.765875]  [<ffffffff81075306>] perf_event_nmi_handler+0x26/0x40
[  148.765877]  [<ffffffff81063ed9>] nmi_handle+0x79/0x100
[  148.765879]  [<ffffffff81064422>] default_do_nmi+0x42/0x100
[  148.765880]  [<ffffffff81064563>] do_nmi+0x83/0xb0
[  148.765884]  [<ffffffff818c7c0f>] end_repeat_nmi+0x1e/0x2e
[  148.765886]  [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0
[  148.765888]  [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0
[  148.765890]  [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0
[  148.765891]  <<EOE>>  [<ffffffff8110ab66>] finish_task_switch+0x156/0x210
[  148.765898]  [<ffffffff818c1671>] __schedule+0x341/0x920
[  148.765899]  [<ffffffff818c1c87>] schedule+0x37/0x80
[  148.765903]  [<ffffffff810ae1af>] ? do_page_fault+0x2f/0x80
[  148.765905]  [<ffffffff818c1f4a>] schedule_user+0x1a/0x50
[  148.765907]  [<ffffffff818c666c>] retint_careful+0x14/0x32
[  148.765908] ---[ end trace e33ff2be78e14901 ]---

The CQM task events are not safe to be called from within interrupt
context because they require performing an IPI to read the counter value
on all sockets. And performing IPIs from within IRQ context is a
"no-no".

Make do with the last read counter value currently event in
event->count when we're invoked in this context.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Will Auld <will.auld@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull USB fixes from Greg KH:
 "Here's a few USB and PHY fixes for 4.2-rc4.

  Nothing major, the shortlog has the full details.

  All of these have been in linux-next successfully"

* tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  USB: OHCI: fix bad #define in ohci-tmio.c
  cdc-acm: Destroy acm_minors IDR on module exit
  usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors
  usb-storage: ignore ZTE MF 823 card reader in mode 0x1225
  USB: OHCI: Fix race between ED unlink and URB submission
  usb: core: lpm: set lpm_capable for root hub device
  xhci: do not report PLC when link is in internal resume state
  xhci: prevent bus_suspend if SS port resuming in phase 1
  xhci: report U3 when link is in resume state
  xhci: Calculate old endpoints correctly on device reset
  usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function
  xhci: Workaround to get D3 working in Intel xHCI
  xhci: call BIOS workaround to enable runtime suspend on Intel Braswell
  usb: dwc3: Reset the transfer resource index on SET_INTERFACE
  usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU
  usb: gadget: mv_udc_core: fix phy_regs I/O memory leak
  usb: ulpi: ulpi_init should be executed in subsys_initcall
  phy: berlin-usb: fix divider for BG2
  phy: berlin-usb: fix divider for BG2CD
  phy/pxa: add HAS_IOMEM dependency
  ...

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small serial and tty fixes for reported issues.

  All have been in linux-next successfully"

* tag 'tty-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: Fix !TASK_RUNNING diagnostic warning from paste_selection()
  serial: core: Fix crashes while echoing when closing
  m32r: Add ioreadXX/iowriteXX big-endian mmio accessors
  Revert "serial: imx: initialized DMA w/o HW flow enabled"
  sc16is7xx: fix FIFO address of secondary UART
  sc16is7xx: fix Kconfig dependencies
  serial: etraxfs-uart: Fix release etraxfs_uart_ports
  tty/vt: Fix the memory leak in visual_init
  serial: amba-pl011: Fix devm_ioremap_resource return value check
  n_tty: signal and flush atomically

Pull staging driver fixes from Greg KH:
 "Here are a number of iio and staging driver fixes for reported issues
  for 4.2-rc4.

  All have been in linux-next for a while with no problems"

* tag 'staging-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits)
  iio:light:stk3310: make endianness independent of host
  iio:light:stk3310: move device register to end of probe
  iio: mma8452: use iio event type IIO_EV_TYPE_MAG
  iio: mcp320x: Fix NULL pointer dereference
  iio: adc: vf610: fix the adc register read fail issue
  iio: mlx96014: Replace offset sign
  iio: magnetometer: mmc35240: fix SET/RESET sequence
  iio: magnetometer: mmc35240: Fix SET/RESET mask
  iio: magnetometer: mmc35240: Fix crash in pm suspend
  iio:magnetometer:bmc150_magn: output intended variable
  iio:magnetometer:bmc150_magn: add regmap dependency
  staging: vt6656: check ieee80211_bss_conf bssid not NULL
  staging: vt6655: check ieee80211_bss_conf bssid not NULL
  iio: tmp006: Check channel info on write
  iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able()
  iio:light:ltr501: fix regmap dependency
  iio:light:ltr501: fix variable in ltr501_init
  iio: sx9500: fix bug in compensation code
  iio: sx9500: rework error handling of raw readings
  iio: magnetometer: mmc35240: fix available sampling frequencies
  ...

Pull char/misc driver fixes from Greg KH:
 "Here are some char and misc driver fixes for reported issues.

  One parport patch is reverted as it was incorrect, thanks to testing
  by the 0-day bot"

* tag 'char-misc-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  parport: Revert "parport: fix memory leak"
  mei: prevent unloading mei hw modules while the device is opened.
  misc: mic: scif bug fix for vmalloc_to_page crash
  parport: fix freeing freed memory
  parport: fix memory leak
  parport: fix error handling

This reverts commit 23c40591 ("parport: fix memory leak")

par_dev->state was already being removed in parport_unregister_device().
Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fix from Steven Rostedt:
 "Back in 3.16 the ftrace code was redesigned and cleaned up to remove
  the double iteration list (one for registered ftrace ops, and one for
  registered "global" ops), to just use one list.  That simplified the
  code but also broke the function tracing filtering on pid.

  This updates the code to handle the filtering again with the new
  logic"

* tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix breakage of set_ftrace_pid

Pull libnvdimm fix from Dan Williams:
 "A minor fix for the libnvdimm subsystem.

  This is not critical.  The problem can be worked around in userspace
  by putting the namespace temporarily into raw mode
  (ndctl_namespace_set_raw_mode() from libndctl), but that is awkward
  for management utilities.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm:
  libnvdimm: fix namespace seed creation

Pull md fixes from Neil Brown:
 "Some md fixes for 4.2

  Several are tagged for -stable.
  A few aren't because they are not very, serious or because they are in
  the 'experimental' cluster code"

* tag 'md/4.2-fixes' of git://neil.brown.name/md:
  md/raid5: clear R5_NeedReplace when no longer needed.
  Fix read-balancing during node failure
  md-cluster: fix bitmap sub-offset in bitmap_read_sb
  md: Return error if request_module fails and returns positive value
  md: Skip cluster setup in case of error while reading bitmap
  md/raid1: fix test for 'was read error from last working device'.
  md: Skip cluster setup for dm-raid
  md: flush ->event_work before stopping array.
  md/raid10: always set reshape_safe when initializing reshape_position.
  md/raid5: avoid races when changing cache size.

Pull MTD fixes from Brian Norris:
 "Two trivial updates.  I meant to send these much earlier, but I've
  been preoccupied.

   - Add MAINTAINERS entry for diskonchip g3 driver

   - Fix an overlooked conflict in bitfield value assignments

  The latter update is a bit overdue, but there's no reason to wait any
  longer"

* tag 'for-linus-20150724' of git://git.infradead.org/linux-mtd:
  mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict
  MAINTAINERS: mtd: docg3: add docg3 maintainer

A new BLK namespace "seed" device is created whenever the current seed
is successfully probed.  However, if that namespace is assigned to a BTT
it may never directly experience a successful probe as it is a
subordinate device to a BTT configuration.

The effect of the current code is that no new namespaces can be
instantiated, after the seed namespace, to consume available BLK DPA
capacity.  Fix this by treating a successful BTT probe event as a
successful probe event for the backing namespace.
Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Pull block fixes from Jens Axboe:
 "Four smaller fixes for the current series.  This contains:

   - A fix for clones of discard bio's, that can cause data corruption.
     From Martin.

   - A fix for null_blk, where in certain queue modes it could access a
     request after it had been freed.  From Mike Krinkin.

   - An error handling leak fix for blkcg, from Tejun.

   - Also from Tejun, export of the functions that a file system needs
     to implement cgroup writeback support"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Do a full clone when splitting discard bios
  block: export bio_associate_*() and wbc_account_io()
  blkcg: fix gendisk reference leak in blkg_conf_prep()
  null_blk: fix use-after-free problem

Pull libata fixes from Tejun Heo:
 "A couple important fixes.

   - A block layer change which removed restriction on max transfer size
     led to silent data corruption on some devices.  A new quirk is
     added to restore the old size limit for the reported device.  If it
     gets reported on more devices, we might have to consider restoring
     the restriction for ATA devices by default.

   - There finally is a SSD which is confirmed to cause data corruption
     on TRIM regardless of which flavor is used.  A new quirk is added
     and the device is blacklisted

   - Other device-specific workarounds"

* 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: Do not blacklist M510DC
  libata: increase the timeout when setting transfer mode
  libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  libata: force disable trim for SuperSSpeed S238
  libata: add ATA_HORKAGE_NOTRIM
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  ata: pmp: add quirk for Marvell 4140 SATA PMP

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.2 rc4.

  Note, most of the changes are for the sdhci-esdhc-imx controller,
  which also required us to modify some related DTS files.  Those
  changes have been acked by the SoC maintainer.

  MMC core:
   - Fix a reference inbalance issue for power_ro_lock_show() sysfs handler

  MMC host:
   - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC
   - sdhci: Prevent a kernel panic while using DMA
   - mtk-sd: Let it depend on HAS_DMA to prevent build errors
   - sdhci-esdhc: Make 8BIT bus work
   - sdhci-esdhc-imx: Fix some regressions for DT based platforms
   - sdhci-pxav3: Fix a regression for DT based platforms"

* tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-pxav3: fix platform_data is not initialized
  dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support
  mmc: sdhci-esdhc-imx: clear f_max in boarddata
  mmc: sdhci-esdhc-imx: remove duplicated dts parsing
  mmc: sdhci: make max-frequency property in device tree work
  mmc: sdhci-esdhc-imx: move all non dt probe code into one function
  mmc: sdhci-esdhc-imx: fix cd regression for dt platform
  dts: imx7: fix sd card gpio polarity specified in device tree
  dts: imx25: fix sd card gpio polarity specified in device tree
  dts: imx6: fix sd card gpio polarity specified in device tree
  dts: imx53: fix sd card gpio polarity specified in device tree
  dts: imx51: fix sd card gpio polarity specified in device tree
  mmc: sdhci-esdhc: Make 8BIT bus work
  mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
  mmc: MMC_MTK should depend on HAS_DMA
  mmc: sdhci check parameters before call dma_free_coherent
  mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts
  mmc: omap_hsmmc: Fix DTO and DCRC handling

Pull input fixes from Dmitry Torokhov:
 "A fix for the warnings/oops when handling HID devices with "unnamed"
  LEDs and couple of other driver fixups""

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix - fix touch coordinates on WinBook TW100 and TW700
  Input: LEDs - skip unnamed LEDs
  Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen
  Input: elantech - force resolution of 31 u/mm
  Input: zforce - don't overwrite the stack

Defining and using strtoul in lustre code results in the following
compile warnings (arm64:allmodconfig).

include/linux/libcfs/libcfs_string.h:105:0: warning: "strtoul" redefined
	#define strtoul(str, endp, base) simple_strtoul(str, endp, base)
include/acpi/platform/aclinux.h:122:0: note:
		this is the location of the previous definition
	#define strtoul	simple_strtoul

Remove the definition and use simple_strtoul() directly. Note that we
can not replace simple_strtoul with kstrtoul since the end pointer
is used by the code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the documentation to the MOST driver that describes its ABI
interface and the basic usage.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the hdm-usb module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
the USB interface of the MOST network interface controller.

This patch is needed in order to use the USB peripheral interface of the
network interface controller.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the hdm-i2c module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
the I2C interface of the MOST network interface controller.

This patch is needed in order to use the I2C peripheral interface of the
network interface controller.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the hdm-dim2 module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
the MediaLB interface of the MOST network interface controller.

This patch is needed in order to use the MediaLB peripheral interface of
the network interface controller.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the aim-v4l2 module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
user space interaction by means of V4L2.

This patch is needed in order to have access to MOST isochronous AVP data
through V4L2 devices.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the aim-sound module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
user space interaction by means of ALSA devices.

This patch is needed in order to have access to MOST synchronous data
through ALSA devices.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the aim-network module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
user space interaction by means of network devices.

This patch is needed in order to have access to MOST Ethernet Packets (MEP)
through a networking device.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the aim-cdev module of the MOST driver to the kernel's
driver staging area. This module is part of the MOST driver and handles
user space interaction by means of character devices.

This patch is needed in order to have access to MOST data through
character devices.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the core module of the MOST driver to the kernel's driver
staging area. This module is part of the MOST driver and handles the
configuration interface in sysfs, the buffer management and the data
routing.

MOST defines the protocol, hardware and software layers necessary to allow
for the efficient and low-cost transport of control, real-time and packet
data using a single medium (physical layer). Media currently in use are
fiber optics, unshielded twisted pair cables (UTP) and coax cables. MOST
also supports various speed grades up to 150 Mbps.
For more information on MOST, visit the MOST Cooperation website:
www.mostcooperation.com.

Cars continue to evolve into sophisticated consumer electronics platforms,
increasing the demand for reliable and simple solutions to support audio,
video and data communications. MOST can be used to connect multiple
consumer devices via optical or electrical physical layers directly to one
another or in a network configuration. As a synchronous network, MOST
provides excellent Quality of Service and seamless connectivity for
audio/video streaming. Therefore, the driver perfectly fits to the mission
of Automotive Grade Linux to create open source software solutions for
automotive applications.

The driver consists basically of three layers. The hardware layer, the
core layer and the application layer. The core layer consists of the core
module only. This module handles the communication flow through all three
layers, the configuration of the driver, the configuration interface
representation in sysfs, and the buffer management.
For each of the other two layers a selection of modules is provided. These
modules can arbitrarily be combined to meet the needs of the desired
system architecture. A module of the hardware layer is referred to as an
HDM (hardware dependent module). Each module of this layer handles exactly
one of the peripheral interfaces of a network interface controller (e.g.
USB, MediaLB, I2C). A module of the application layer is referred to as an
AIM (application interfacing module). The modules of this layer give access
to MOST via one the following ways: character devices, ALSA, Networking or
V4L2.

To physically access MOST, an Intelligent Network Interface Controller
(INIC) is needed. For more information on available controllers visit:
www.microchip.com
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After IO partition recovery, it was possible to get into a situation where
a visornic device would repeatedly report:

    NETDEV WATCHDOG: eth0 (): transmit queue 0 timed out

The actual problem would affect any visornic device that was rapidly
transmitting at the same time the IO partition was being recovered. Once
you hit the problem, the only way to resume use of the nic would be to
reboot the Linux client partition.

The problem was caused by chstat.sent_xmit and chstat.got_xmit_done NOT
getting cleared during IO partition recovery. This is necessary because
outstanding xmits would essentially be "abandoned" during such recovery.
These fields are now cleared in virtnic_serverdown_complete().
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Logic to check for failures of visorchannel_signalinsert() and
visorchannel_signalremove() were added, and a new sent_post_failed counter
tracks the number of times we failed to post a rcv buffer to the IO
partition.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

visornic tx reset handling is done asynchronously via a workqueue in
visornic_timeout_reset().  As a result, it needs to use rtnl_lock() /
rtnl_unlock() to lock against possible simultaneous close() of the network
device.

(I consulted the bnx2 driver as a model here, as that driver also does
its tx reset handling asynchronously, just like visornic does.  See
bnx2_tx_timeout() and bnx2_reset_task().)
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When s-Par is in polling mode it checks every 2 ms to see if there is
a response from the IO service partition in the queue. Currently it
just reads one entry per 2 ms, this needs to be changed so it drains
the queue on each check.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Flag is never set. Remove it and the code that is dead because of it.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>