- 24 Feb, 2013 40 commits
-
-
Benson Leung authored
This adds the chromeos_laptop driver. It supports the Cypress APA SMBUS touchpad as well as the isl29018 i2c ambient light sensor on the Samsung Series 5 550 Chromebook. Signed-off-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com>
-
Manoj Iyer authored
The new B series BIOS has version string 43CN46WW. The driver requires that 2nd and 3rd characters be 'E' and 'T' respectively, where as the newer BIOS has 'C' and 'N' respectively. Failing to load the module causes some of the hotkeys to not work. Before the patch ================ sudo modprobe thinkpad_acpi FATAL: Error inserting thinkpad_acpi (/lib/modules/3.5.0-15-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device After the patch =============== [44937.265438] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [44937.265445] thinkpad_acpi: http://ibm-acpi.sf.net/ [44937.265449] thinkpad_acpi: ThinkPad BIOS 43CN46WW, EC unknown [44937.265453] thinkpad_acpi: Lenovo Lenovo B470e, model HuronRiver Platform [44937.266479] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [44937.266557] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [44937.267846] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [44937.268131] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17 Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
James Ferguson <james.ferguson@canonical.com> Signed-off-by:
-
Trepák Vilmos authored
Add rfkill support for the GPS radio found in HP laptops (HP Elitebook 2170p and the like) using the Ericsson F5321/H5321 Mobile Broadband Module. Signed-off-by:
Viliam Trepák <trepo@netcomga.sk> Signed-off-by:
-
Lee, Chun-Yi authored
Found another Lenovo ideapad S205 the product name is 1038DPG, it has a 0x78 EC register exposes the state of wifi hardware switch on the machine. So, add this patch to support Lenovo ideapad S205-1038DPG wifi hardware switch in acer-wmi driver. Evidently the Ideapad S205 is just a model name on the market, but they have totally different product name in DMI table. Reference: bko#43007 https://bugzilla.kernel.org/show_bug.cgi?id=43007Tested-by:Colin <colin.newell@gmail.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Lee, Chun-Yi authored
Found another Lenovo ideapad S205 the product name is 10382JG, it has a 0x78 EC register exposes the state of wifi hardware switch on the machine. So, add this patch to support Lenovo ideapad S205-10382JG wifi hardware switch in acer-wmi driver. Evidently the Ideapad S205 is just a model name on the market, but they have totally different product name in DMI table. Reference: bko#43007 https://bugzilla.kernel.org/show_bug.cgi?id=43007Tested-by:Ivo Anjo <knuckles@gmail.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by:
-
AceLan Kao authored
Fill up all the video switch keys in the map. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Corentin Chary <corentin.chary@gmail.com> Signed-off-by:
-
AceLan Kao authored
For machines with AMD graphic chips, it will send out WMI event and ACPI interrupt at the same time while hitting the hotkey. BIOS will notify the system the next display output mode throught WMI event code, so that windows' application can show an OSD to tell the user which mode will be taken effect. User can hit the display toggle key many times within 2 seconds to choose the mode they want. After 2 seconds, WMI dirver should send a WMIMethod(SDSP) command to tell the BIOS which mode the user chose. And then BIOS will raise another ACPI interrupt to tell the system to really switch the display mode. In Linux desktop, we don't have this kind of OSD to let users to choose the mode they want, so we don't need to call WMIMethod(SDSP) to have another ACPI interrupt. To simplify the problem, we just have to ignore the WMI event, and let the first ACPI interrupt to send out the key event. For the need, here comes another quirk to add machines with this kind of behavior. When the WMI driver receives the display toggle WMI event, and found the machin is in the list, it will do nothing and let ACPI video driver to report the key event. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
-
AceLan Kao authored
Fill up all the video switch keys in the map. Signed-off-by:
-
AceLan Kao authored
0x60 is touchpad enable key, but is misdefined in the keymap. Signed-off-by:
-
AceLan Kao authored
0x60 is touchpad enable key, but is misdefined in the keymap. Signed-off-by:
-
Corentin Chary authored
Maybe this should be shared in another module... Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Maxim Mikityanskiy authored
Add MSI Wind support to msi-wmi driver. MSI Wind has different GUID for key events, different WMI key scan codes, it does not need filtering consecutive identical events and it does not support backlight control via MSIWMI_BIOS_GUID WMI. Tested on MSI Wind U100. Signed-off-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by:
-
Maxim Mikityanskiy authored
Introduced quirk_last_pressed variable that would indicate if last_pressed is used or not. Also converted last_pressed to simple variable in order to allow keymap to be non-contiguous. Signed-off-by:
-
Maxim Mikityanskiy authored
Introduced function msi_wmi_backlight_setup() that initializes backlight device. Made driver load and work if only one WMI (only for hotkeys or only for backlight) is present. Signed-off-by:
-
Maxim Mikityanskiy authored
Use enums for consecutive scancodes, rename key names from MSI_WMI_* to MSI_KEY_* and use tabs for whitespace in msi_wmi_keymap. Signed-off-by:
-
Maxim Mikityanskiy authored
Use UUID defines in MODULE_ALIAS strings to avoid repeating strings. Signed-off-by:
-
Maxim Mikityanskiy authored
Fix memory leak - don't forget to kfree ACPI object when returning from msi_wmi_notify() after suppressing key event. Signed-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
-
Maxim Mikityanskiy authored
It seems that existing brightness control works only for old EC models. On newer ones auto_brightness access always timeouts and lcd_level always shows 0. So disable brightness control for new EC models. It works fine with ACPI video driver anyway. Signed-off-by:
-
Maxim Mikityanskiy authored
Add ABI documentation for all sysfs files exposed by msi-laptop driver. Signed-off-by:
-
Maxim Mikityanskiy authored
Add MSI Wind U90/U100 to DMI table and add some missing EC features support such as basic fan control, turbo and ECO modes and touchpad state. Tested on MSI Wind U100. Signed-off-by:
-
Lee, Chun-Yi authored
This patch introduced a quirk_entry struct, then we merged all quirk tables to msi_dmi_table. Then we can more easily to set different quirk attributes for different machine. Signed-off-by:
-
Maxim Mikityanskiy authored
Assign initial value to variable in order to prevent gcc warning about uninitialized variable. Signed-off-by:
-
Maxim Mikityanskiy authored
Use proper function return codes instead of -1 Signed-off-by:
-
AceLan Kao authored
For those machines with wapf=4, BIOS won't update the wireless LED, since wapf=4 means user application will take in chage of the wifi and bt. So, we have to update wlan LED status explicitly. But I found there is another wireless LED bug in launchpad and which is not in the wapf=4 quirk. So, it might be better to set wireless LED status explicitly for all machines. BugLink: https://launchpad.net/bugs/901105Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signalLinus Torvalds authored
Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ... -
Linus Torvalds authored
Merge second patch-bomb from Andrew Morton: - A little DM fix - the MM queue * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (154 commits) ksm: allocate roots when needed mm: cleanup "swapcache" in do_swap_page mm,ksm: swapoff might need to copy mm,ksm: FOLL_MIGRATION do migration_entry_wait ksm: shrink 32-bit rmap_item back to 32 bytes ksm: treat unstable nid like in stable tree ksm: add some comments tmpfs: fix mempolicy object leaks tmpfs: fix use-after-free of mempolicy object mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages mm: export mmu notifier invalidates mm: accelerate mm_populate() treatment of THP pages mm: use long type for page counts in mm_populate() and get_user_pages() mm: accurately document nr_free_*_pages functions with code comments HWPOISON: change order of error_states[]'s elements HWPOISON: fix misjudgement of page_action() for errors on mlocked pages memcg: stop warning on memcg_propagate_kmem net: change type of virtio_chan->p9_max_pages vmscan: change type of vm_total_pages to unsigned long fs/nfsd: change type of max_delegations, nfsd_drc_max_mem and nfsd_drc_mem_used ...
-
Hugh Dickins authored
It is a pity to have MAX_NUMNODES+MAX_NUMNODES tree roots statically allocated, particularly when very few users will ever actually tune merge_across_nodes 0 to use more than 1+1 of those trees. Not a big deal (only 16kB wasted on each machine with CONFIG_MAXSMP), but a pity. Start off with 1+1 statically allocated, then if merge_across_nodes is ever tuned, allocate for nr_node_ids+nr_node_ids. Do not attempt to free up the extra if it's tuned back, that would be a waste of effort. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
I dislike the way in which "swapcache" gets used in do_swap_page(): there is always a page from swapcache there (even if maybe uncached by the time we lock it), but tests are made according to "swapcache". Rework that with "page != swapcache", as has been done in unuse_pte(). Signed-off-by:
-
Hugh Dickins authored
Before establishing that KSM page migration was the cause of my WARN_ON_ONCE(page_mapped(page))s, I suspected that they came from the lack of a ksm_might_need_to_copy() in swapoff's unuse_pte() - which in many respects is equivalent to faulting in a page. In fact I've never caught that as the cause: but in theory it does at least need the KSM_RUN_UNMERGE check in ksm_might_need_to_copy(), to avoid bringing a KSM page back in when it's not supposed to be. I intended to copy how it's done in do_swap_page(), but have a strong aversion to how "swapcache" ends up being used there: rework it with "page != swapcache". Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Hugh Dickins authored
In "ksm: remove old stable nodes more thoroughly" I said that I'd never seen its WARN_ON_ONCE(page_mapped(page)). True at the time of writing, but it soon appeared once I tried fuller tests on the whole series. It turned out to be due to the KSM page migration itself: unmerge_and_ remove_all_rmap_items() failed to locate and replace all the KSM pages, because of that hiatus in page migration when old pte has been replaced by migration entry, but not yet by new pte. follow_page() finds no page at that instant, but a KSM page reappears shortly after, without a fault. Add FOLL_MIGRATION flag, so follow_page() can do migration_entry_wait() for KSM's break_cow(). I'd have preferred to avoid another flag, and do it every time, in case someone else makes the same easy mistake; but did not find another transgressor (the common get_user_pages() is of course safe), and cannot be sure that every follow_page() caller is prepared to sleep - ia64's xencomm_vtop()? Now, THP's wait_split_huge_page() can already sleep there, since anon_vma locking was changed to mutex, but maybe that's somehow excluded. Signed-off-by:
-
Hugh Dickins authored
Think of struct rmap_item as an extension of struct page (restricted to MADV_MERGEABLE areas): there may be a lot of them, we need to keep them small, especially on 32-bit architectures of limited lowmem. Siting "int nid" after "unsigned int checksum" works nicely on 64-bit, making no change to its 64-byte struct rmap_item; but bloats the 32-bit struct rmap_item from (nicely cache-aligned) 32 bytes to 36 bytes, which rounds up to 40 bytes once allocated from slab. We'd better avoid that. Hey, I only just remembered that the anon_vma pointer in struct rmap_item has no purpose until the rmap_item is hung from a stable tree node (which has its own nid field); and rmap_item's nid field no purpose than to say which tree root to tell rb_erase() when unlinking from an unstable tree. Double them up in a union. There's just one place where we set anon_vma early (when we already hold mmap_sem): now we must remove tree_rmap_item from its unstable tree there, before overwriting nid. No need to spatter BUG()s around: we'd be seeing oopses if this were wrong. Signed-off-by:
-
Hugh Dickins authored
An inconsistency emerged in reviewing the NUMA node changes to KSM: when meeting a page from the wrong NUMA node in a stable tree, we say that it's okay for comparisons, but not as a leaf for merging; whereas when meeting a page from the wrong NUMA node in an unstable tree, we bail out immediately. Now, it might be that a wrong NUMA node in an unstable tree is more likely to correlate with instablility (different content, with rbnode now misplaced) than page migration; but even so, we are accustomed to instablility in the unstable tree. Without strong evidence for which strategy is generally better, I'd rather be consistent with what's done in the stable tree: accept a page from the wrong NUMA node for comparison, but not as a leaf for merging. Signed-off-by:
-
Hugh Dickins authored
Added slightly more detail to the Documentation of merge_across_nodes, a few comments in areas indicated by review, and renamed get_ksm_page()'s argument from "locked" to "lock_it". No functional change. Signed-off-by:
-
Greg Thelen authored
Fix several mempolicy leaks in the tmpfs mount logic. These leaks are slow - on the order of one object leaked per mount attempt. Leak 1 (umount doesn't free mpol allocated in mount): while true; do mount -t tmpfs -o mpol=interleave,size=100M nodev /mnt umount /mnt done Leak 2 (errors parsing remount options will leak mpol): mount -t tmpfs -o size=100M nodev /mnt while true; do mount -o remount,mpol=interleave,size=x /mnt 2> /dev/null done umount /mnt Leak 3 (multiple mpol per mount leak mpol): while true; do mount -t tmpfs -o mpol=interleave,mpol=interleave,size=100M nodev /mnt umount /mnt done This patch fixes all of the above. I could have broken the patch into three pieces but is seemed easier to review as one. [akpm@linux-foundation.org: fix handling of mpol_parse_str() errors, per Hugh] Signed-off-by:Greg Thelen <gthelen@google.com> Acked-by:
-
Greg Thelen authored
The tmpfs remount logic preserves filesystem mempolicy if the mpol=M option is not specified in the remount request. A new policy can be specified if mpol=M is given. Before this patch remounting an mpol bound tmpfs without specifying mpol= mount option in the remount request would set the filesystem's mempolicy object to a freed mempolicy object. To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run: # mkdir /tmp/x # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0 # mount -o remount,size=200M nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0 # note ? garbage in mpol=... output above # dd if=/dev/zero of=/tmp/x/f count=1 # panic here Panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Oops: 0010 [#1] SMP DEBUG_PAGEALLOC Call Trace: mpol_shared_policy_init+0xa5/0x160 shmem_get_inode+0x209/0x270 shmem_mknod+0x3e/0xf0 shmem_create+0x18/0x20 vfs_create+0xb5/0x130 do_last+0x9a1/0xea0 path_openat+0xb3/0x4d0 do_filp_open+0x42/0xa0 do_sys_open+0xfe/0x1e0 compat_sys_open+0x1b/0x20 cstar_dispatch+0x7/0x1f Non-debug kernels will not crash immediately because referencing the dangling mpol will not cause a fault. Instead the filesystem will reference a freed mempolicy object, which will cause unpredictable behavior. The problem boils down to a dropped mpol reference below if shmem_parse_options() does not allocate a new mpol: config = *sbinfo shmem_parse_options(data, &config, true) mpol_put(sbinfo->mpol) sbinfo->mpol = config.mpol /* BUG: saves unreferenced mpol */ This patch avoids the crash by not releasing the mempolicy if shmem_parse_options() doesn't create a new mpol. How far back does this issue go? I see it in both 2.6.36 and 3.3. I did not look back further. Signed-off-by: -
Mel Gorman authored
Rob van der Heij reported the following (paraphrased) on private mail. The scenario is that I want to avoid backups to fill up the page cache and purge stuff that is more likely to be used again (this is with s390x Linux on z/VM, so I don't give it as much memory that we don't care anymore). So I have something with LD_PRELOAD that intercepts the close() call (from tar, in this case) and issues a posix_fadvise() just before closing the file. This mostly works, except for small files (less than 14 pages) that remains in page cache after the face. Unfortunately Rob has not had a chance to test this exact patch but the test program below should be reproducing the problem he described. The issue is the per-cpu pagevecs for LRU additions. If the pages are added by one CPU but fadvise() is called on another then the pages remain resident as the invalidate_mapping_pages() only drains the local pagevecs via its call to pagevec_release(). The user-visible effect is that a program that uses fadvise() properly is not obeyed. A possible fix for this is to put the necessary smarts into invalidate_mapping_pages() to globally drain the LRU pagevecs if a pagevec page could not be discarded. The downside with this is that an inode cache shrink would send a global IPI and memory pressure potentially causing global IPI storms is very undesirable. Instead, this patch adds a check during fadvise(POSIX_FADV_DONTNEED) to check if invalidate_mapping_pages() discarded all the requested pages. If a subset of pages are discarded it drains the LRU pagevecs and tries again. If the second attempt fails, it assumes it is due to the pages being mapped, locked or dirty and does not care. With this patch, an application using fadvise() correctly will be obeyed but there is a downside that a malicious application can force the kernel to send global IPIs and increase overhead. If accepted, I would like this to be considered as a -stable candidate. It's not an urgent issue but it's a system call that is not working as advertised which is weak. The following test program demonstrates the problem. It should never report that pages are still resident but will without this patch. It assumes that CPU 0 and 1 exist. int main() { int fd; int pagesize = getpagesize(); ssize_t written = 0, expected; char *buf; unsigned char *vec; int resident, i; cpu_set_t set; /* Prepare a buffer for writing */ expected = FILESIZE_PAGES * pagesize; buf = malloc(expected + 1); if (buf == NULL) { printf("ENOMEM\n"); exit(EXIT_FAILURE); } buf[expected] = 0; memset(buf, 'a', expected); /* Prepare the mincore vec */ vec = malloc(FILESIZE_PAGES); if (vec == NULL) { printf("ENOMEM\n"); exit(EXIT_FAILURE); } /* Bind ourselves to CPU 0 */ CPU_ZERO(&set); CPU_SET(0, &set); if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) { perror("sched_setaffinity"); exit(EXIT_FAILURE); } /* open file, unlink and write buffer */ fd = open("fadvise-test-file", O_CREAT|O_EXCL|O_RDWR); if (fd == -1) { perror("open"); exit(EXIT_FAILURE); } unlink("fadvise-test-file"); while (written < expected) { ssize_t this_write; this_write = write(fd, buf + written, expected - written); if (this_write == -1) { perror("write"); exit(EXIT_FAILURE); } written += this_write; } free(buf); /* * Force ourselves to another CPU. If fadvise only flushes the local * CPUs pagevecs then the fadvise will fail to discard all file pages */ CPU_ZERO(&set); CPU_SET(1, &set); if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) { perror("sched_setaffinity"); exit(EXIT_FAILURE); } /* sync and fadvise to discard the page cache */ fsync(fd); if (posix_fadvise(fd, 0, expected, POSIX_FADV_DONTNEED) == -1) { perror("posix_fadvise"); exit(EXIT_FAILURE); } /* map the file and use mincore to see which parts of it are resident */ buf = mmap(NULL, expected, PROT_READ, MAP_SHARED, fd, 0); if (buf == NULL) { perror("mmap"); exit(EXIT_FAILURE); } if (mincore(buf, expected, vec) == -1) { perror("mincore"); exit(EXIT_FAILURE); } /* Check residency */ for (i = 0, resident = 0; i < FILESIZE_PAGES; i++) { if (vec[i]) resident++; } if (resident != 0) { printf("Nr unexpected pages resident: %d\n", resident); exit(EXIT_FAILURE); } munmap(buf, expected); close(fd); free(vec); exit(EXIT_SUCCESS); } Signed-off-by:Mel Gorman <mgorman@suse.de> Reported-by:
Rob van der Heij <rvdheij@gmail.com> Tested-by:
-
Cliff Wickman authored
We at SGI have a need to address some very high physical address ranges with our GRU (global reference unit), sometimes across partitioned machine boundaries and sometimes with larger addresses than the cpu supports. We do this with the aid of our own 'extended vma' module which mimics the vma. When something (either unmap or exit) frees an 'extended vma' we use the mmu notifiers to clean them up. We had been able to mimic the functions __mmu_notifier_invalidate_range_start() and __mmu_notifier_invalidate_range_end() by locking the per-mm lock and walking the per-mm notifier list. But with the change to a global srcu lock (static in mmu_notifier.c) we can no longer do that. Our module has no access to that lock. So we request that these two functions be exported. Signed-off-by:
Cliff Wickman <cpw@sgi.com> Acked-by:
Robin Holt <holt@sgi.com> Signed-off-by:
-
Michel Lespinasse authored
This change adds a follow_page_mask function which is equivalent to follow_page, but with an extra page_mask argument. follow_page_mask sets *page_mask to HPAGE_PMD_NR - 1 when it encounters a THP page, and to 0 in other cases. __get_user_pages() makes use of this in order to accelerate populating THP ranges - that is, when both the pages and vmas arrays are NULL, we don't need to iterate HPAGE_PMD_NR times to cover a single THP page (and we also avoid taking mm->page_table_lock that many times). Signed-off-by:
Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Michel Lespinasse authored
Use long type for page counts in mm_populate() so as to avoid integer overflow when running the following test code: int main(void) { void *p = mmap(NULL, 0x100000000000, PROT_READ, MAP_PRIVATE | MAP_ANON, -1, 0); printf("p: %p\n", p); mlockall(MCL_CURRENT); printf("done\n"); return 0; } Signed-off-by:
-
