- 13 Nov, 2014 25 commits
-
-
Dan Williams authored
commit 012eee15 upstream. Port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Daniele Palmas authored
commit 2d0eb862 upstream. Add VID/PID for Telit LE910 modem. Interfaces description is almost the same than LE920, except that the qmi interface is number 2 (instead than 5). Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Frans Klaver authored
commit edd74ffa upstream. Add new IDs for the Xsens Awinda Station and Awinda Dongle. While at it, order the definitions by PID and add a logical separation between devices using Xsens' VID and those using FTDI's VID. Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Signed-off-by:
-
Nathaniel Ting authored
commit 35cc83ea upstream. Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now connect to host PCs over a USB serial link. Signed-off-by:
Nathaniel Ting <nathaniel.ting@silabs.com> Signed-off-by:
-
Jan Kara authored
commit 474d2605 upstream. Due to a switched left and right side of an assignment, dquot_writeback_dquots() never returned error. This could result in errors during quota writeback to not be reported to userspace properly. Fix it. Coverity-id: 1226884 Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 7938db44 upstream. The check whether quota format is set even though there are no quota files with journalled quota is pointless and it actually makes it impossible to turn off journalled quotas (as there's no way to unset journalled quota format). Just remove the check. Signed-off-by:
-
Ben Hutchings authored
commit a5b7616c upstream. m25p80's device ID table is now spi_nor_ids, defined in spi-nor. The MODULE_DEVICE_TABLE() macro doesn't work with extern definitions, but its use was also removed at the same time. Now if m25p80 is built as a module it doesn't get the necessary aliases to be loaded automatically. A clean solution to this will involve defining the list of device IDs in spi-nor.h and removing struct spi_device_id from the spi-nor API, but this is quite a large change. As a quick fix suitable for stable, copy the device IDs back into m25p80. Fixes: 03e296f6 ("mtd: m25p80: use the SPI nor framework") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Ben Hutchings authored
commit 70f3ce05 upstream. Drivers currently call spi_nor_match_id() and then spi_nor_scan(). This adds a dependency on struct spi_device_id which we want to avoid. Make spi_nor_scan() do it for them. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
commit 90e55b38 upstream. This simplifies the way we use spi_nor framework and will allow us to drop spi_nor_match_id. Signed-off-by:
-
Rafał Miłecki authored
commit 32f1b7c8 upstream. This "type" seems to be an extra hint for m25p80 about the flash. Some archs register flash_platform_data with "name" set to "m25p80" and then with a real flash name set in "type". It seems to be a trick specific to the m25p80 so let's move it out of spi-nor. Btw switch to the spi_nor_match_id instead of iterating spi_nor_ids. Signed-off-by:
-
J. Bruce Fields authored
commit d1d84c96 upstream. We added this new estimator function but forgot to hook it up. The effect is that NFSv4.1 (and greater) won't do zero-copy reads. The estimate was also wrong by 8 bytes. Fixes: ccae70a9 "nfsd4: estimate sequence response size" Reported-by:
Chuck Lever <chucklever@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Felipe Balbi authored
commit 52ec49a5 upstream. During Halt Endpoint Test, our interrupt endpoint will be disabled, which will clear out ep->desc to NULL. Unless we call config_ep_by_speed() again, we will not be able to enable this endpoint which will make us fail that test. Fixes: f9c56cdd (usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable) Signed-off-by:
Felipe Balbi <balbi@ti.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Felipe Balbi authored
commit 7a608559 upstream. According to our Gadget Framework API documentation, ->set_halt() *must* return -EAGAIN if we have pending transfers (on either direction) or FIFO isn't empty (on TX endpoints). Fix this bug so that the mass storage gadget can be used without stall=0 parameter. This patch should be backported to all kernels since v3.2. Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Ian Abbott authored
commit 6cab7a37 upstream. `do_cmd_ioctl()`, the handler for the `COMEDI_CMD` ioctl can incorrectly call the Comedi subdevice's `do_cmd()` handler with a NULL channel list pointer. This is a regression as the `do_cmd()` handler has never been expected to deal with that, leading to a kernel OOPS when it tries to dereference it. A NULL channel list pointer is allowed for the `COMEDI_CMDTEST` ioctl, handled by `do_cmdtest_ioctl()` and the subdevice's `do_cmdtest()` handler, but not for the `COMEDI_CMD` ioctl and its handlers. Both `do_cmd_ioctl()` and `do_cmdtest_ioctl()` call `__comedi_get_user_chanlist()` to copy the channel list from user memory into dynamically allocated kernel memory and check it for consistency. That function currently returns 0 if the `user_chanlist` parameter (pointing to the channel list in user memory) is NULL. That's fine for `do_cmdtest_ioctl()`, but `do_cmd_ioctl()` incorrectly assumes the kernel copy of the channel list has been set-up correctly. Fix it by not allowing the `user_chanlist` parameter to be NULL in `__comedi_get_user_chanlist()`, and only calling it from `do_cmdtest_ioctl()` if the parameter is non-NULL. Thanks to Bernd Porr for reporting the bug via an initial patch sent privately. Fixes: c6cd0eef ("staging: comedi: comedi_fops: introduce __comedi_get_user_chanlist()") Reported-by:
Bernd Porr <mail@berndporr.me.uk> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Bernd Porr <mail@berndporr.me.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Liam Girdwood authored
commit 2ccf3bd4 upstream. Fix driver with correct formats. Signed-off-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Karl Beldan authored
commit c7abf25a upstream. It affects non-(V)HT rates and can lead to selecting an rts_cts rate that is not a basic rate or way superior to the reference rate (ATM rates[0] used for the 1st attempt of the protected frame data). E.g, assuming drivers register growing (bitrate) sorted tables of ieee80211_rate-s, having : - rates[0].idx == d'2 and basic_rates == b'10100 will select rts_cts idx b'10011 & ~d'(BIT(2)-1), i.e. 1, likewise - rates[0].idx == d'2 and basic_rates == b'10001 will select rts_cts idx b'10000 The first is not a basic rate and the second is > rates[0]. Also, wrt severity of the addressed misbehavior, ATM we only have one rts_cts_rate_idx rather than one per rate table entry, so this idx might still point to bitrates > rates[1..MAX_RATES]. Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ray Jui authored
commit 3ffa6158 upstream. When mapped RX DMA entries are unmapped in an error condition when DMA is firstly configured in the driver, the number of TX DMA entries was passed in, which is incorrect Signed-off-by:
Ray Jui <rjui@broadcom.com> Signed-off-by:
-
Fabio Estevam authored
commit 75d7ed3b upstream. We should disable lradc->clk in the case of errors in the probe function. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Robin van der Gracht authored
commit 4250c90b upstream. Use byte_for_channel as iterator to properly initialize the buffer. Signed-off-by:
Robin van der Gracht <robin@protonic.nl> Acked-by:
Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 6822ee34 upstream. "raw" is the name of a channel property, but should not be part of the channel name itself. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit 824269c5 upstream. In older versions of the IIO framework it was possible to pass a completely different set of channels to iio_buffer_register() as the one that is assigned to the IIO device. Commit 959d2952 ("staging:iio: make iio_sw_buffer_preenable much more general.") introduced a restriction that requires that the set of channels that is passed to iio_buffer_register() is a subset of the channels assigned to the IIO device as the IIO core will use the list of channels that is assigned to the device to lookup a channel by scan index in iio_compute_scan_bytes(). If it can not find the channel the function will crash. This patch fixes the issue by making sure that the same set of channels is assigned to the IIO device and passed to iio_buffer_register(). Fixes the follow NULL pointer derefernce kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 00000016 pgd = d53d0000 [00000016] *pgd=1534e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1626 Comm: bash Not tainted 3.15.0-19969-g2a180eb-dirty #9545 task: d6c124c0 ti: d539a000 task.ti: d539a000 PC is at iio_compute_scan_bytes+0x34/0xa8 LR is at iio_compute_scan_bytes+0x34/0xa8 pc : [<c03052e4>] lr : [<c03052e4>] psr: 60070013 sp : d539beb8 ip : 00000001 fp : 00000000 r10: 00000002 r9 : 00000000 r8 : 00000001 r7 : 00000000 r6 : d6dc8800 r5 : d7571000 r4 : 00000002 r3 : d7571000 r2 : 00000044 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 18c5387d Table: 153d004a DAC: 00000015 Process bash (pid: 1626, stack limit = 0xd539a240) Stack: (0xd539beb8 to 0xd539c000) bea0: c02fc0e4 d7571000 bec0: d76c1640 d6dc8800 d757117c 00000000 d757112c c0305b04 d76c1690 d76c1640 bee0: d7571188 00000002 00000000 d7571000 d539a000 00000000 000dd1c8 c0305d54 bf00: d7571010 0160b868 00000002 c69d3900 d7573278 d7573308 c69d3900 c01ece90 bf20: 00000002 c0103fac c0103f6c d539bf88 00000002 c69d3b00 c69d3b0c c0103468 bf40: 00000000 00000000 d7694a00 00000002 000af408 d539bf88 c000dd84 c00b2f94 bf60: d7694a00 000af408 00000002 d7694a00 d7694a00 00000002 000af408 c000dd84 bf80: 00000000 c00b32d0 00000000 00000000 00000002 b6f1aa78 00000002 000af408 bfa0: 00000004 c000dc00 b6f1aa78 00000002 00000001 000af408 00000002 00000000 bfc0: b6f1aa78 00000002 000af408 00000004 be806a4c 000a6094 00000000 000dd1c8 bfe0: 00000000 be8069cc b6e8ab77 b6ec125c 40070010 00000001 22940489 154a5007 [<c03052e4>] (iio_compute_scan_bytes) from [<c0305b04>] (__iio_update_buffers+0x248/0x438) [<c0305b04>] (__iio_update_buffers) from [<c0305d54>] (iio_buffer_store_enable+0x60/0x7c) [<c0305d54>] (iio_buffer_store_enable) from [<c01ece90>] (dev_attr_store+0x18/0x24) [<c01ece90>] (dev_attr_store) from [<c0103fac>] (sysfs_kf_write+0x40/0x4c) [<c0103fac>] (sysfs_kf_write) from [<c0103468>] (kernfs_fop_write+0x110/0x154) [<c0103468>] (kernfs_fop_write) from [<c00b2f94>] (vfs_write+0xd0/0x160) [<c00b2f94>] (vfs_write) from [<c00b32d0>] (SyS_write+0x40/0x78) [<c00b32d0>] (SyS_write) from [<c000dc00>] (ret_fast_syscall+0x0/0x30) Code: ea00000e e1a01008 e1a00005 ebfff6fc (e5d0a016) Fixes: 959d2952 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by:
-
Daniel Borkmann authored
commit 26b87c78 upstream. This scenario is not limited to ASCONF, just taken as one example triggering the issue. When receiving ASCONF probes in the form of ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ---- ASCONF_a; [ASCONF_b; ...; ASCONF_n;] JUNK ------> [...] ---- ASCONF_m; [ASCONF_o; ...; ASCONF_z;] JUNK ------> ... where ASCONF_a, ASCONF_b, ..., ASCONF_z are good-formed ASCONFs and have increasing serial numbers, we process such ASCONF chunk(s) marked with !end_of_packet and !singleton, since we have not yet reached the SCTP packet end. SCTP does only do verification on a chunk by chunk basis, as an SCTP packet is nothing more than just a container of a stream of chunks which it eats up one by one. We could run into the case that we receive a packet with a malformed tail, above marked as trailing JUNK. All previous chunks are here goodformed, so the stack will eat up all previous chunks up to this point. In case JUNK does not fit into a chunk header and there are no more other chunks in the input queue, or in case JUNK contains a garbage chunk header, but the encoded chunk length would exceed the skb tail, or we came here from an entirely different scenario and the chunk has pdiscard=1 mark (without having had a flush point), it will happen, that we will excessively queue up the association's output queue (a correct final chunk may then turn it into a response flood when flushing the queue ;)): I ran a simple script with incremental ASCONF serial numbers and could see the server side consuming excessive amount of RAM [before/after: up to 2GB and more]. The issue at heart is that the chunk train basically ends with !end_of_packet and !singleton markers and since commit 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") therefore preventing an output queue flush point in sctp_do_sm() -> sctp_cmd_interpreter() on the input chunk (chunk = event_arg) even though local_cork is set, but its precedence has changed since then. In the normal case, the last chunk with end_of_packet=1 would trigger the queue flush to accommodate possible outgoing bundling. In the input queue, sctp_inq_pop() seems to do the right thing in terms of discarding invalid chunks. So, above JUNK will not enter the state machine and instead be released and exit the sctp_assoc_bh_rcv() chunk processing loop. It's simply the flush point being missing at loop exit. Adding a try-flush approach on the output queue might not work as the underlying infrastructure might be long gone at this point due to the side-effect interpreter run. One possibility, albeit a bit of a kludge, would be to defer invalid chunk freeing into the state machine in order to possibly trigger packet discards and thus indirectly a queue flush on error. It would surely be better to discard chunks as in the current, perhaps better controlled environment, but going back and forth, it's simply architecturally not possible. I tried various trailing JUNK attack cases and it seems to look good now. Joint work with Vlad Yasevich. Fixes: 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
commit b69040d8 upstream. When receiving a e.g. semi-good formed connection scan in the form of ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ---------------- ASCONF_a; ASCONF_b -----------------> ... where ASCONF_a equals ASCONF_b chunk (at least both serials need to be equal), we panic an SCTP server! The problem is that good-formed ASCONF chunks that we reply with ASCONF_ACK chunks are cached per serial. Thus, when we receive a same ASCONF chunk twice (e.g. through a lost ASCONF_ACK), we do not need to process them again on the server side (that was the idea, also proposed in the RFC). Instead, we know it was cached and we just resend the cached chunk instead. So far, so good. Where things get nasty is in SCTP's side effect interpreter, that is, sctp_cmd_interpreter(): While incoming ASCONF_a (chunk = event_arg) is being marked !end_of_packet and !singleton, and we have an association context, we do not flush the outqueue the first time after processing the ASCONF_ACK singleton chunk via SCTP_CMD_REPLY. Instead, we keep it queued up, although we set local_cork to 1. Commit 2e3216cd changed the precedence, so that as long as we get bundled, incoming chunks we try possible bundling on outgoing queue as well. Before this commit, we would just flush the output queue. Now, while ASCONF_a's ASCONF_ACK sits in the corked outq, we continue to process the same ASCONF_b chunk from the packet. As we have cached the previous ASCONF_ACK, we find it, grab it and do another SCTP_CMD_REPLY command on it. So, effectively, we rip the chunk->list pointers and requeue the same ASCONF_ACK chunk another time. Since we process ASCONF_b, it's correctly marked with end_of_packet and we enforce an uncork, and thus flush, thus crashing the kernel. Fix it by testing if the ASCONF_ACK is currently pending and if that is the case, do not requeue it. When flushing the output queue we may relink the chunk for preparing an outgoing packet, but eventually unlink it when it's copied into the skb right before transmission. Joint work with Vlad Yasevich. Fixes: 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") Signed-off-by:
-
Daniel Borkmann authored
commit 9de7922b upstream. Commit 6f4c618d ("SCTP : Add paramters validity check for ASCONF chunk") added basic verification of ASCONF chunks, however, it is still possible to remotely crash a server by sending a special crafted ASCONF chunk, even up to pre 2.6.12 kernels: skb_over_panic: text:ffffffffa01ea1c3 len:31056 put:30768 head:ffff88011bd81800 data:ffff88011bd81800 tail:0x7950 end:0x440 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8144fb1c>] skb_put+0x5c/0x70 [<ffffffffa01ea1c3>] sctp_addto_chunk+0x63/0xd0 [sctp] [<ffffffffa01eadaf>] sctp_process_asconf+0x1af/0x540 [sctp] [<ffffffff8152d025>] ? _read_unlock_bh+0x15/0x20 [<ffffffffa01e0038>] sctp_sf_do_asconf+0x168/0x240 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffff8147645d>] ? fib_rules_lookup+0xad/0xf0 [<ffffffffa01e6b22>] ? sctp_cmp_addr_exact+0x32/0x40 [sctp] [<ffffffffa01e8393>] sctp_assoc_bh_rcv+0xd3/0x180 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff81496ded>] ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497078>] ip_local_deliver+0x98/0xa0 [<ffffffff8149653d>] ip_rcv_finish+0x12d/0x440 [<ffffffff81496ac5>] ip_rcv+0x275/0x350 [<ffffffff8145c88b>] __netif_receive_skb+0x4ab/0x750 [<ffffffff81460588>] netif_receive_skb+0x58/0x60 This can be triggered e.g., through a simple scripted nmap connection scan injecting the chunk after the handshake, for example, ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ------------------ ASCONF; UNKNOWN ------------------> ... where ASCONF chunk of length 280 contains 2 parameters ... 1) Add IP address parameter (param length: 16) 2) Add/del IP address parameter (param length: 255) ... followed by an UNKNOWN chunk of e.g. 4 bytes. Here, the Address Parameter in the ASCONF chunk is even missing, too. This is just an example and similarly-crafted ASCONF chunks could be used just as well. The ASCONF chunk passes through sctp_verify_asconf() as all parameters passed sanity checks, and after walking, we ended up successfully at the chunk end boundary, and thus may invoke sctp_process_asconf(). Parameter walking is done with WORD_ROUND() to take padding into account. In sctp_process_asconf()'s TLV processing, we may fail in sctp_process_asconf_param() e.g., due to removal of the IP address that is also the source address of the packet containing the ASCONF chunk, and thus we need to add all TLVs after the failure to our ASCONF response to remote via helper function sctp_add_asconf_response(), which basically invokes a sctp_addto_chunk() adding the error parameters to the given skb. When walking to the next parameter this time, we proceed with ... length = ntohs(asconf_param->param_hdr.length); asconf_param = (void *)asconf_param + length; ... instead of the WORD_ROUND()'ed length, thus resulting here in an off-by-one that leads to reading the follow-up garbage parameter length of 12336, and thus throwing an skb_over_panic for the reply when trying to sctp_addto_chunk() next time, which implicitly calls the skb_put() with that length. Fix it by using sctp_walk_params() [ which is also used in INIT parameter processing ] macro in the verification *and* in ASCONF processing: it will make sure we don't spill over, that we walk parameters WORD_ROUND()'ed. Moreover, we're being more defensive and guard against unknown parameter types and missized addresses. Joint work with Vlad Yasevich. Fixes: b896b82b ("[SCTP] ADDIP: Support for processing incoming ASCONF_ACK chunks.") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Ben Hutchings authored
commit de11b0e8 upstream. These drivers now call ipv6_proxy_select_ident(), which is defined only if CONFIG_INET is enabled. However, they have really depended on CONFIG_INET for as long as they have allowed sending GSO packets from userland. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
- 05 Nov, 2014 15 commits
-
-
Tom Herbert authored
commit 14051f04 upstream. Currently, skb_inner_network_header is used but this does not account for Ethernet header for ETH_P_TEB. Use skb_inner_mac_header which handles TEB and also should work with IP encapsulation in which case inner mac and inner network headers are the same. Tested: Ran TCP_STREAM over GRE, worked as expected. Signed-off-by:
Tom Herbert <therbert@google.com> Acked-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Or Gerlitz authored
commit a4f2dacb upstream. For VXLAN/NVGRE encapsulation, the current HW doesn't support offloading both the outer UDP TX checksum and the inner TCP/UDP TX checksum. The driver doesn't advertize SKB_GSO_UDP_TUNNEL_CSUM, however we are wrongly telling the HW to offload the outer UDP checksum for encapsulated packets, fix that. Fixes: 837052d0 ('net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Nicolas Cavallari authored
commit fa19c2b0 upstream. If we cache them, the kernel will reuse them, independently of whether forwarding is enabled or not. Which means that if forwarding is disabled on the input interface where the first routing request comes from, then that unreachable result will be cached and reused for other interfaces, even if forwarding is enabled on them. The opposite is also true. This can be verified with two interfaces A and B and an output interface C, where B has forwarding enabled, but not A and trying ip route get $dst iif A from $src && ip route get $dst iif B from $src Signed-off-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Eric Dumazet authored
commit fe0ca732 upstream. We need to cancel the work queue after rcu grace period, otherwise it can be rescheduled by incoming packets. We need to purge queue if some skbs are still in it. We can use __skb_queue_head_init() variant in macvlan_process_broadcast() Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue") Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
commit 349ce993 upstream. percpu tcp_md5sig_pool contains memory blobs that ultimately go through sg_set_buf(). -> sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); This requires that whole area is in a physically contiguous portion of memory. And that @buf is not backed by vmalloc(). Given that alloc_percpu() can use vmalloc() areas, this does not fit the requirements. Replace alloc_percpu() by a static DEFINE_PER_CPU() as tcp_md5sig_pool is small anyway, there is no gain to dynamically allocate it. Signed-off-by:
Crestez Dan Leonard <cdleonard@gmail.com> Signed-off-by:
-
Haiyang Zhang authored
commit 942396b0 upstream. total_data_buflen is used by netvsc_send() to decide if a packet can be put into send buffer. It should also include the size of RNDIS message before the Ethernet frame. Otherwise, a messge with total size bigger than send_section_size may be copied into the send buffer, and cause data corruption. [Request to include this patch to the Stable branches] Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Karl Beldan authored
commit a63ba13e upstream. The crafted header start address is from a driver supplied buffer, which one can reasonably expect to be aligned on a 4-bytes boundary. However ATM the TSO helper API is only used by ethernet drivers and the tcp header will then be aligned to a 2-bytes only boundary from the header start address. Signed-off-by:
-
Ian Morgan authored
commit 95ff8868 upstream. The following patch fixes a bug which causes the ax88179_178a driver to be incapable of being added to a bond. When I brought up the issue with the bonding maintainers, they indicated that the real problem was with the NIC driver which must return zero for success (of setting the MAC address). I see that several other NIC drivers follow that pattern by either simply always returing zero, or by passing through a negative (error) result while rewriting any positive return code to zero. With that same philisophy applied to the ax88179_178a driver, it allows it to work correctly with the bonding driver. I believe this is suitable for queuing in -stable, as it's a small, simple, and obvious fix that corrects a defect with no other known workaround. This patch is against vanilla 3.17(.0). Signed-off-by:
Ian Morgan <imorgan@primordial.ca> drivers/net/usb/ax88179_178a.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) Signed-off-by:
-
Li RongQing authored
commit 1245dfc8 upstream. pskb_may_pull() maybe change skb->data and make eth pointer oboslete, so set eth after pskb_may_pull() Fixes:3d7b46cd("ip_tunnel: push generic protocol handling to ip_tunnel module") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Vasily Averin authored
commit 4062090e upstream. ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork and in case errors in __ip_append_data() nobody frees stolen dst entry Fixes: 2e77d89b ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()") Signed-off-by:
Vasily Averin <vvs@parallels.com> Acked-by:
-
Li RongQing authored
commit 7a9f526f upstream. pskb_may_pull maybe change skb->data and make eth pointer oboslete, so eth needs to reload Fixes: 91269e39 ("vxlan: using pskb_may_pull as early as possible") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Li RongQing authored
commit 91269e39 upstream. pskb_may_pull should be used to check if skb->data has enough space, skb->len can not ensure that. Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Li RongQing authored
commit ce6502a8 upstream. when netif_rx() is done, the netif_rx handled skb maybe be freed, and should not be used. Signed-off-by:
-
Jiri Pirko authored
commit f76936d0 upstream. fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
-
Alexei Starovoitov authored
commit e0ee9c12 upstream. 1. JIT compiler using multi-pass approach to converge to final image size, since x86 instructions are variable length. It starts with large gaps between instructions (so some jumps may use imm32 instead of imm8) and iterates until total program size is the same as in previous pass. This algorithm works only if program size is strictly decreasing. Programs that use LD_ABS insn need additional code in prologue, but it was not emitted during 1st pass, so there was a chance that 2nd pass would adjust imm32->imm8 jump offsets to the same number of bytes as increase in prologue, which may cause algorithm to erroneously decide that size converged. Fix it by always emitting largest prologue in the first pass which is detected by oldproglen==0 check. Also change error check condition 'proglen != oldproglen' to fail gracefully. 2. while staring at the code realized that 64-byte buffer may not be enough when 1st insn is large, so increase it to 128 to avoid buffer overflow (theoretical maximum size of prologue+div is 109) and add runtime check. Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Reported-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
