When a device is hot removed on powernv, the hotplug driver clears
the device's state. However, on pseries, if a device is removed by
phyp after reaching the error threshold, the kernel remains unaware,
leading to the device not being torn down. This prevents necessary
remediation actions like failover.

Permanently disable the device if the presence check fails.

Also, in eeh_dev_check_failure in we may consider the error as false
positive if the device is hotpluged out as the get_state call returns
EEH_STATE_NOT_SUPPORT and we may end up not clearing the device state,
so log the event if the state is not moved to permanent failure state.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422075737.1405551-1-ganeshgr@linux.ibm.com

The patch titled ("powerpc: make fadump resilient with memory add/remove
events") has made significant changes to the implementation of fadump,
particularly on elfcorehdr creation and fadump crash info header
structure. Therefore, updating the fadump implementation documentation
to reflect those changes.

Following updates are done to firmware assisted dump documentation:

1. The elfcorehdr is no longer stored after fadump HDR in the reserved
   dump area. Instead, the second kernel dynamically allocates memory
   for the elfcorehdr within the address range from 0 to the boot memory
   size. Therefore, update figures 1 and 2 of Memory Reservation during
   the first and second kernels to reflect this change.

2. A version field has been added to the fadump header to manage the
   future changes to fadump crash info header structure without changing
   the fadump header magic number in the future. Therefore, remove the
   corresponding TODO from the document.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-4-sourabhjain@linux.ibm.com

The elfcorehdr describes the CPUs and memory of the crashed kernel to
the kernel that captures the dump, known as the second or fadump kernel.
The elfcorehdr needs to be updated if the system's memory changes due to
memory hotplug or online/offline events.

Currently, memory hotplug events are monitored in userspace by udev
rules, and fadump is re-registered, which recreates the elfcorehdr with
the latest available memory in the system.

However, the previous patch ("powerpc: make fadump resilient with memory
add/remove events") moved the creation of elfcorehdr to the second or
fadump kernel. This eliminates the need to regenerate the elfcorehdr
during memory hotplug or online/offline events.

Create a sysfs entry at /sys/kernel/fadump/hotplug_ready to let
userspace know that fadump re-registration is not required for memory
add/remove events.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-3-sourabhjain@linux.ibm.com

Due to changes in memory resources caused by either memory hotplug or
online/offline events, the elfcorehdr, which describes the CPUs and
memory of the crashed kernel to the kernel that collects the dump (known
as second/fadump kernel), becomes outdated. Consequently, attempting
dump collection with an outdated elfcorehdr can lead to failed or
inaccurate dump collection.

Memory hotplug or online/offline events is referred as memory add/remove
events in reset of the commit message.

The current solution to address the aforementioned issue is as follows:
Monitor memory add/remove events in userspace using udev rules, and
re-register fadump whenever there are changes in memory resources. This
leads to the creation of a new elfcorehdr with updated system memory
information.

There are several notable issues associated with re-registering fadump
for every memory add/remove events.

1. Bulk memory add/remove events with udev-based fadump re-registration
   can lead to race conditions and, more importantly, it creates a wide
   window during which fadump is inactive until all memory add/remove
   events are settled.
2. Re-registering fadump for every memory add/remove event is
   inefficient.
3. The memory for elfcorehdr is allocated based on the memblock regions
   available during early boot and remains fixed thereafter. However, if
   elfcorehdr is later recreated with additional memblock regions, its
   size will increase, potentially leading to memory corruption.

Address the aforementioned challenges by shifting the creation of
elfcorehdr from the first kernel (also referred as the crashed kernel),
where it was created and frequently recreated for every memory
add/remove event, to the fadump kernel. As a result, the elfcorehdr only
needs to be created once, thus eliminating the necessity to re-register
fadump during memory add/remove events.

At present, the first kernel prepares fadump header and stores it in the
fadump reserved area. The fadump header includes the start address of
the elfcorehdr, crashing CPU details, and other relevant information. In
the event of a crash in the first kernel, the second/fadump boots and
accesses the fadump header prepared by the first kernel. It then
performs the following steps in a platform-specific function
[rtas|opal]_fadump_process:

1. Sanity check for fadump header
2. Update CPU notes in elfcorehdr

Along with the above, update the setup_fadump()/fadump.c to create
elfcorehdr and set its address to the global variable elfcorehdr_addr
for the vmcore module to process it in the second/fadump kernel.

Section below outlines the information required to create the elfcorehdr
and the changes made to make it available to the fadump kernel if it's
not already.

To create elfcorehdr, the following crashed kernel information is
required: CPU notes, vmcoreinfo, and memory ranges.

At present, the CPU notes are already prepared in the fadump kernel, so
no changes are needed in that regard. The fadump kernel has access to
all crashed kernel memory regions, including boot memory regions that
are relocated by firmware to fadump reserved areas, so no changes for
that either. However, it is necessary to add new members to the fadump
header, i.e., the 'fadump_crash_info_header' structure, in order to pass
the crashed kernel's vmcoreinfo address and its size to fadump kernel.

In addition to the vmcoreinfo address and size, there are a few other
attributes also added to the fadump_crash_info_header structure.

1. version:
   It stores the fadump header version, which is currently set to 1.
   This provides flexibility to update the fadump crash info header in
   the future without changing the magic number. For each change in the
   fadump header, the version will be increased. This will help the
   updated kernel determine how to handle kernel dumps from older
   kernels. The magic number remains relevant for checking fadump header
   corruption.

2. pt_regs_sz/cpu_mask_sz:
   Store size of pt_regs and cpu_mask structure of first kernel. These
   attributes are used to prevent dump processing if the sizes of
   pt_regs or cpu_mask structure differ between the first and fadump
   kernels.

Note: if either first/crashed kernel or second/fadump kernel do not have
the changes introduced here then kernel fail to collect the dump and
prints relevant error message on the console.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422195932.1583833-2-sourabhjain@linux.ibm.com

Couple of Minor fixes:

- hcall return values are long. Fix that for h_get_mpp, h_get_ppp and
parse_ppp_data

- If hcall fails, values set should be at-least zero. It shouldn't be
uninitialized values. Fix that for h_get_mpp and h_get_ppp
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240412092047.455483-3-sshegde@linux.ibm.com

When there are no options specified for lparstat, it is expected to
give reports since LPAR(Logical Partition) boot.

APP(Available Processor Pool) is an indicator of how many cores in the
shared pool are free to use in Shared Processor LPAR(SPLPAR). APP is
derived using pool_idle_time which is obtained using H_PIC call.

The interval based reports show correct APP value while since boot
report shows very high APP values. This happens because in that case APP
is obtained by dividing pool idle time by LPAR uptime. Since pool idle
time is reported by the PowerVM hypervisor since its boot, it need not
align with LPAR boot.

To fix that export boot pool idle time in lparcfg and powerpc-utils will
use this info to derive APP as below for since boot reports.

APP = (pool idle time - boot pool idle time) / (uptime * timebase)

Results:: Observe APP values.
====================== Shared LPAR ================================
lparstat
System Configuration
type=Shared mode=Uncapped smt=8 lcpu=12 mem=15573440 kB cpus=37 ent=12.00

reboot
stress-ng --cpu=$(nproc) -t 600
sleep 600
So in this case app is expected to close to 37-6=31.

====== 6.9-rc1 and lparstat 1.3.10  =============
%user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
----- ----- -----    -----    ----- ----- ----- ----- ----- -----
47.48  0.01  0.00    52.51     0.00  0.00 47.49 69099.72 541547    21

=== With this patch and powerpc-utils patch to do the above equation ===
%user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
----- ----- -----    -----    ----- ----- ----- ----- ----- -----
47.48  0.01  0.00    52.51     5.73 47.75 47.49 31.21 541753    21
=====================================================================

Note: physc, purr/idle purr being inaccurate is being handled in a
separate patch in powerpc-utils tree.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240412092047.455483-2-sshegde@linux.ibm.com

memory limit value specified by the user are further updated such that
the value is 16MB aligned. This is because hash translation mode use
16MB as direct mapping page size. Make sure we update the global
variable 'memory_limit' with the 16MB aligned value such that all kernel
components will see the new aligned value of the memory limit.
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403083611.172833-3-aneesh.kumar@kernel.org

If the user specifies the memory limit, the kernel should honor it such
that all allocation and reservations are made within the memory limit
specified. fadump was breaking that rule. Remove the code which updates
the memory limit such that fadump reservations are done within the
limit specified.
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403083611.172833-2-aneesh.kumar@kernel.org

The value specified for the memory limit is used to set a restriction on
memory usage. It is important to ensure that this restriction is within
the linear map kernel address space range. The hash page table
translation uses a 16MB page size to map the kernel linear map address
space. htab_bolt_mapping() function aligns down the size of the range
while mapping kernel linear address space. Since the memblock limit is
enforced very early during boot, before we can detect the type of memory
translation (radix vs hash), we align the memory limit value specified
as a kernel parameter to 16MB. This alignment value will work for both
hash and radix translations.
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403083611.172833-1-aneesh.kumar@kernel.org

Currently walk_vmemmap() skips the first vmemmap entry pointed to by
vmemmap_list pointer itself. Fix that.

With the fix applied the vmemmap entry at 0xc00c000000000000 for hash is
displayed:

  $ cat /sys/kernel/debug/kernel_hash_pagetable
  ...
  0xc00c000000010000:     AVPN:cd7bd4e0000          ssize: 1T ...
  0xc00c000000000000:     AVPN:cd7bd4e0000          ssize: 1T ...
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
[mpe: Tweak change log wording and add example output]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a19ee3dc2b304d39da364a592d5cd167449f8c4a.1713365940.git.ritesh.list@gmail.com

nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel
crash when invoked during real mode interrupt handling (e.g. early HMI/MCE
interrupt handler) if percpu allocation comes from vmalloc area.

Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI()
wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when
percpu allocation is from the embedded first chunk. However with
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu
allocation can come from the vmalloc area.

With kernel command line "percpu_alloc=page" we can force percpu allocation
to come from vmalloc area and can see kernel crash in machine_check_early:

[    1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110
[    1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0
[    1.215719] --- interrupt: 200
[    1.215720] [c000000fffd73180] [0000000000000000] 0x0 (unreliable)
[    1.215722] [c000000fffd731b0] [0000000000000000] 0x0
[    1.215724] [c000000fffd73210] [c000000000008364] machine_check_early_common+0x134/0x1f8

Fix this by avoiding use of nmi_enter()/nmi_exit() in real mode if percpu
first chunk is not embedded.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Shirisha Ganta <shirisha@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240410043006.81577-1-mahesh@linux.ibm.com

JUMP_LABEL_FEATURE_CHECK_DEBUG used static_key_intialized to determine
whether {cpu,mmu}_has_feature() is used before static keys were
initialized. However, {cpu,mmu}_has_feature() should not be used before
setup_feature_keys() is called but static_key_initialized is set well
before this by the call to jump_label_init() in early_init_devtree().
This creates a window in which JUMP_LABEL_FEATURE_CHECK_DEBUG will not
detect misuse and report errors. Add a flag specifically to indicate
when {cpu,mmu}_has_feature() is safe to use.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240408052358.5030-1-nicholas@linux.ibm.com

of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240313135645.2066362-1-andriy.shevchenko@linux.intel.com

When building with LLVM_IAS=1, there is an error because
'-fatal-warnings' is not recognized as a valid flag:

  clang: error: unsupported argument '-fatal-warnings' to option '-Wa,'

Use the double hyphen version of the flag, '--fatal-warnings', which
works with both the GNU assembler and LLVM's integrated assembler.

Fixes: 608d4a5c ("powerpc: Error on assembly warnings")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240405-ppc-fix-wa-fatal-warnings-clang-v1-1-bdcd969f2ef0@kernel.org

The struct ps3_notification_device in the ps3_probe_thread routine
is too large to be on the stack, causing a warning for an
allmodconfig build with clang.

Change the struct ps3_notification_device from a variable on the stack
to a dynamically allocated variable.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d64f06f4-81ae-4ec5-ab3b-d7f7f091e0ac@infradead.org

We currently enable -Werror on the arch/powerpc subtree. However this
only catches C warnings. Assembly warnings are logged, but the make
invocation will still succeed. This can allow incorrect syntax such as

  ori r3, r4, r5

to be compiled without catching that the assembler is treating r5
as the immediate value 5.

To prevent this in assembly files and inline assembly, add the
-fatal-warnings option to assembler invocations.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326044420.577031-1-bgray@linux.ibm.com

vmpic_msi_feature is only used conditionally, which triggers a rare
-Werror=unused-const-variable= warning with gcc:

arch/powerpc/sysdev/fsl_msi.c:567:37: error: 'vmpic_msi_feature' defined but not used [-Werror=unused-const-variable=]
  567 | static const struct fsl_msi_feature vmpic_msi_feature =

Hide this one in the same #ifdef as the reference so we can turn on
the warning by default.

Fixes: 305bcf26 ("powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcalls")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403080702.3509288-2-arnd@kernel.org

Fixes the following Coccinelle/coccicheck warning reported by
string_choices.cocci:

	opportunity for str_plural(tpc)
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240331222249.107467-2-thorsten.blum@toblux.com

Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Deduplicate Kconfig entries for CONFIG_CXL_PMU

 - Fix unselectable choice entry in MIPS Kconfig, and forbid this
   structure

 - Remove unused include/asm-generic/export.h

 - Fix a NULL pointer dereference bug in modpost

 - Enable -Woverride-init warning consistently with W=1

 - Drop KCSAN flags from *.mod.c files

* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: Fix typo HEIGTH to HEIGHT
  Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
  kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
  kbuild: make -Woverride-init warnings more consistent
  modpost: do not make find_tosym() return NULL
  export.h: remove include/asm-generic/export.h
  kconfig: do not reparent the menu inside a choice block
  MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
  cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig

Pull EDAC fixes from Borislav Petkov:

 - Fix more issues in the AMD FMPM driver

* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  RAS: Avoid build errors when CONFIG_DEBUG_FS=n
  RAS/AMD/FMPM: Safely handle saved records of various sizes
  RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()

Pull irq fixes from Borislav Petkov:

 - Fix an unused function warning on irqchip/irq-armada-370-xp

 - Fix the IRQ sharing with pinctrl-amd and ACPI OSL

* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/armada-370-xp: Suppress unused-function warning
  genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd

Pull x86 perf fixes from Borislav Petkov:

 - Define the correct set of default hw events on AMD Zen4

 - Use the correct stalled cycles PMCs on AMD Zen2 and newer

 - Fix detection of the LBR freeze feature on AMD

* tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later
  perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later
  perf/x86/amd/lbr: Use freeze based on availability
  x86/cpufeatures: Add new word for scattered features

Pull timers update from Borislav Petkov:

 - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that
   tglx can relax more :-P

* tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add co-maintainers for time[rs]

Pull objtool fix from Borislav Petkov:

 - Fix a format specifier build error in objtool during an x32 build

* tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix compile failure when using the x32 compiler

Pull x86 fixes from Borislav Petkov:

 - Make sure single object builds in arch/x86/virt/ ala
      make ... arch/x86/virt/vmx/tdx/seamcall.o
   work again

 - Do not do ROM range scans and memory validation when the kernel is
   running as a SEV-SNP guest as those can get problematic and, before
   that, are not really needed in such a guest

 - Exclude the build-time generated vdso-image-x32.o object from objtool
   validation and in particular the return sites in there due to a
   warning which fires when an unpatched return thunk is being used

 - Improve the NMI CPUs stall message to show additional information
   about the state of each CPU wrt the NMI handler

 - Enable gcc named address spaces support only on !KCSAN configs due to
   compiler options incompatibility

 - Revert a change which was trying to use GB pages for mapping regions
   only when the regions would be large enough but that change lead to
   kexec failing

 - A documentation fixlet

* tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use obj-y to descend into arch/x86/virt/
  x86/sev: Skip ROM range scans and validation for SEV-SNP guests
  x86/vdso: Fix rethunk patching for vdso-image-x32.o too
  x86/nmi: Upgrade NMI backtrace stall checks & messages
  x86/percpu: Disable named address spaces for KCSAN
  Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."
  Documentation/x86: Fix title underline length

Fixed a typo in some variables where height was misspelled as heigth.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As of the first s390 pull request during the 6.9 merge window,
commit 691632f0 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.

Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When KCSAN and CONSTRUCTORS are enabled, one can trigger the

  "Unpatched return thunk in use. This should not happen!"

catch-all warning.

Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.

KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:

  -------------------
  Disassembly of section .text.startup:

  ...

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:

  -------------------
  Disassembly of section .text.startup:

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <_sub_I_00099_0+0xe>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4

  ...

  0000000000000030 <_sub_I_00099_0>:
    30:   f3 0f 1e fa             endbr64
    34:   e8 00 00 00 00          call   39 <_sub_I_00099_0+0x9>
                          35: R_X86_64_PLT32      __tsan_init-0x4
    39:   e9 00 00 00 00          jmp    3e <__ksymtab_cryptd_alloc_ahash+0x2>
                          3a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

in the .ko file.

Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.

Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.

Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.deSigned-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.

Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.

There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.

Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.

Fixes: 2cd3271b ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.

	In file included from check.c:16:
	check.c: In function ‘add_dead_ends’:
	/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
	   46 |                 "%s: warning: objtool: " format "\n",   \
	      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
	check.c:613:33: note: in expansion of macro ‘WARN’
	  613 |                                 WARN("can't find unreachable insn at %s+0x%" PRIx64,
	      |                                 ^~~~
	...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org

Pull xfs fixes from Chandan Babu:

 - Allow stripe unit/width value passed via mount option to be written
   over existing values in the super block

 - Do not set current->journal_info to avoid its value from being miused
   by another filesystem context

* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't use current->journal_info
  xfs: allow sunit mount option to repair bad primary sb stripe values

Pull SCSI fixes and updates from James Bottomley:
 "Fully half this pull is updates to lpfc and qla2xxx which got
  committed just as the merge window opened. A sizeable fraction of the
  driver updates are simple bug fixes (and lock reworks for bug fixes in
  the case of lpfc), so rather than splitting the few actual
  enhancements out, we're just adding the drivers to the -rc1 pull.

  The enhancements for lpfc are log message removals, copyright updates
  and three patches redefining types. For qla2xxx it's just removing a
  debug message on module removal and the manufacturer detail update.

  The two major fixes are the sg teardown race and a core error leg
  problem with the procfs directory not being removed if we destroy a
  created host that never got to the running state. The rest are minor
  fixes and constifications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
  scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
  scsi: core: Fix unremoved procfs host directory regression
  scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
  scsi: sd: Fix TCG OPAL unlock on system resume
  scsi: sg: Avoid sg device teardown race
  scsi: lpfc: Copyright updates for 14.4.0.1 patches
  scsi: lpfc: Update lpfc version to 14.4.0.1
  scsi: lpfc: Define types in a union for generic void *context3 ptr
  scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
  scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
  scsi: lpfc: Use a dedicated lock for ras_fwlog state
  scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
  scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
  scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
  scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
  scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
  scsi: lpfc: Remove unnecessary log message in queuecommand path
  scsi: qla2xxx: Update version to 10.02.09.200-k
  scsi: qla2xxx: Delay I/O Abort on PCI error
  scsi: qla2xxx: Change debug message during driver unload
  ...

Pull i2c fix from Wolfram Sang:
 "A fix from Andi for I2C host drivers"

* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1

Pull USB fixes from Greg KH:
 "Here are a bunch of small USB fixes for reported problems and
  regressions for 6.9-rc2. Included in here are:

   - deadlock fixes for long-suffering issues

   - USB phy driver revert for reported problem

   - typec fixes for reported problems

   - duplicate id in dwc3 dropped

   - dwc2 driver fixes

   - udc driver warning fix

   - cdc-wdm race bugfix

   - other tiny USB bugfixes

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: core: Fix deadlock in port "disable" sysfs attribute
  USB: core: Add hub_get() and hub_put() routines
  usb: typec: ucsi: Check capabilities before cable and identity discovery
  usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
  usb: typec: ucsi_acpi: Refactor and fix DELL quirk
  usb: typec: ucsi: Ack unsupported commands
  usb: typec: ucsi: Check for notifications after init
  usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
  usb: typec: Return size of buffer if pd_set operation succeeds
  usb: udc: remove warning when queue disabled ep
  usb: dwc3: pci: Drop duplicate ID
  usb: dwc3: Properly set system wakeup
  Revert "usb: phy: generic: Get the vbus supply"
  usb: cdc-wdm: close race between read and workqueue
  usb: dwc2: gadget: LPM flow fix
  usb: dwc2: gadget: Fix exiting from clock gating
  usb: dwc2: host: Fix ISOC flow in DDMA mode
  usb: dwc2: host: Fix remote wakeup from hibernation
  usb: dwc2: host: Fix hibernation flow
  USB: core: Fix deadlock in usb_deauthorize_interface()
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for the vc04_services driver
  that resolve reported problems:

   - strncpy fix for information leak

   - another information leak discovered by the previous strncpy fix

  Both of these have been in linux-next all this past week with no
  reported issues"

* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vc04_services: fix information leak in create_component()
  staging: vc04_services: changen strncpy() to strscpy_pad()

Merge tag 'i2c-host-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

One fix in the i801 driver where a bug caused touchpad
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.

Commit c33621b4 ("x86/virt/tdx: Wire up basic SEAMCALL functions")
introduced a new instance of core-y instead of the standardized obj-y
syntax.

X86 Makefiles descend into subdirectories of arch/x86/virt inconsistently;
into arch/x86/virt/ via core-y defined in arch/x86/Makefile, but into
arch/x86/virt/svm/ via obj-y defined in arch/x86/Kbuild.

This is problematic when you build a single object in parallel because
multiple threads attempt to build the same file.

  $ make -j$(nproc) arch/x86/virt/vmx/tdx/seamcall.o
    [ snip ]
    AS      arch/x86/virt/vmx/tdx/seamcall.o
    AS      arch/x86/virt/vmx/tdx/seamcall.o
  fixdep: error opening file: arch/x86/virt/vmx/tdx/.seamcall.o.d: No such file or directory
  make[4]: *** [scripts/Makefile.build:362: arch/x86/virt/vmx/tdx/seamcall.o] Error 2

Use the obj-y syntax, as it works correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240330060554.18524-1-masahiroy@kernel.org

Pull drm fixes from Dave Airlie:
 "Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
  then mostly scattered around. rc3 might be quieter with the holidays
  but we shall see.

  bridge:
   - select DRM_KMS_HELPER

  dma-buf:
   - fix NULL-pointer deref

  dp:
   - fix div-by-zero in DP MST unplug code

  fbdev:
   - select FB_IOMEM_FOPS for SBus

  sched:
   - fix NULL-pointer deref

  xe:
   - Fix build on mips
   - Fix wrong bound checks
   - Fix use of msec rather than jiffies
   - Remove dead code

  amdgpu:
   - SMU 14.0.1 updates
   - DCN 3.5.x updates
   - VPE fix
   - eDP panel flickering fix
   - Suspend fix
   - PSR fix
   - DCN 3.0+ fix
   - VCN 4.0.6 updates
   - debugfs fix

  amdkfd:
   - DMA-Buf fix
   - GFX 9.4.2 TLB flush fix
   - CP interrupt fix

  i915:
   - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c
   - Update a MTL workaround
   - Fix locking inversion in hwmon's sysfs
   - Remove a bogus error message around PXP
   - Fix UAF on VMA
   - Reset queue_priority_hint on parking
   - Display Fixes:
   - Remove duplicated audio enable/disable on SDVO and DP
   - Disable AuxCCS for Xe driver
   - Revert init order of MIPI DSI
   - DRRS debugfs fix with an extra refactor patch
   - VRR related fixes
   - Fix a JSL eDP corruption
   - Fix the cursor physical dma address
   - BIOS VBT related fix

  nouveau:
   - dmem: handle kcalloc() allocation failures

  qxl:
   - remove unused variables

  rockchip:
   - vop2: remove support for AR30 and AB30 formats

  vmwgfx:
   - debugfs: create ttm_resource_manager entry only if needed"

* tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits)
  drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode()
  drm/i915: Pre-populate the cursor physical dma address
  drm/i915/gt: Reset queue_priority_hint on parking
  drm/i915/vma: Fix UAF on destroy against retire race
  drm/i915: Do not print 'pxp init failed with 0' when it succeed
  drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()
  drm/i915/hwmon: Fix locking inversion in sysfs getter
  drm/i915/dsb: Fix DSB vblank waits when using VRR
  drm/i915/vrr: Generate VRR "safe window" for DSB
  drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status
  drm/i915/drrs: Refactor CPU transcoder DRRS check
  drm/i915/mtl: Update workaround 14018575942
  drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly
  drm/i915/display: Disable AuxCCS framebuffers if built for Xe
  drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP
  drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c
  drm/qxl: remove unused variable from `qxl_process_single_command()`
  drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()`
  drm/i915: add bug.h include to i915_memcpy.c
  drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
  ...

Merge tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to seccomp and ftrace tests and a change to add config file for
  dmabuf-heap test to increase coverage"

* tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: dmabuf-heap: add config file for the test
  selftests/seccomp: Try to fit runtime of benchmark into timeout
  selftests/ftrace: Fix event filter target_func selection