- 16 Dec, 2014 1 commit
-
-
Nicholas Bellinger authored
This patch fixes the usage of R_HOLDER bit for an All Registrants reservation in READ_FULL_STATUS, where only the registration who issued RESERVE was being reported as having an active reservation. It changes core_scsi3_pri_read_full_status() to check ahead of the list walk of active registrations to see if All Registrants is active, and if so set R_HOLDER bit and scope/type fields for all active registrations. Reported-by:
Ilias Tsitsimpis <i.tsitsimpis@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- 13 Dec, 2014 26 commits
-
-
Nicholas Bellinger authored
This patch drops the left-over iscsi_np->tpg_np pointer, now that iser-target PI is able to dynamically allocate PI contexts per I/O, instead of needing to determine support using a TPG attribute with this bogus reference. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: -
Nicholas Bellinger authored
CC [M] drivers/infiniband/ulp/isert/ib_isert.o drivers/infiniband/ulp/isert/ib_isert.c: In function ‘isert_cq_comp_err’: drivers/infiniband/ulp/isert/ib_isert.c:1979:42: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: -
Sagi Grimberg authored
- Fall-through in switch case instead in do_control_comp. - Move rkey invalidation to a function. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
debug_level 1 (warn): Include warning messages. debug_level 2 (info): Include relevant info for control plane. debug_level 3 (debug): Include relevant info in the IO path. Also, added/removed some logging messages. Signed-off-by:
-
Sagi Grimberg authored
Personal preference, easier control of the log level with a single modparam which can be changed dynamically. Allows better saparation of control and IO plains. Replaced throughout ib_isert.c: s/pr_debug/isert_dbg/g s/pr_info/isert_info/g s/pr_warn/isert_warn/g s/pr_err/isert_err/g Plus nit checkpatch warning change. Signed-off-by:
-
Sagi Grimberg authored
We don't want to wait for conn_logout_comp from isert_comp_wq context as this blocks further completions from being processed. Instead we wait for it conditionally (if logout response was actually posted) in wait_conn. This wait should normally happen immediately as it occurs after we consumed all the completions (including flush errors) and conn_logout_comp should have been completed. Signed-off-by:
-
Sagi Grimberg authored
Might result in a deadlock where completion context waits for session commands release where the later might need a final completion for it. Signed-off-by:
-
Sagi Grimberg authored
In order to reduce the contention on CQ locking (present in some LLDDs) we poll in batches of 16 work completion items. Signed-off-by:
-
Sagi Grimberg authored
In case the CQ is packed with completions, we can't just hog the CPU forever. Poll until a sufficient budget (currently hard-coded to 64k completions) and if budget is exhausted, bailout and give a chance to other threads. Signed-off-by:
-
Sagi Grimberg authored
In order to know that we consumed all the connection completions we maintain atomic post_send_buf_count for each IO post send. But we can know that if we post a "beacon" (zero length RECV work request) after we move the QP into error state and the target does not serve any new IO. When we consume it, we know we finished all the connection completion and we can go ahead and destroy stuff. In error completion handler we now just need to check for ISERT_BEACON_WRID to arrive and then wait for session commands to cleanup and complete conn_wait_comp_err. We reserve another CQ and QP entries to fit the zero length post recv. Signed-off-by:
-
Sagi Grimberg authored
We are calling session reinstatement, wait_conn will start connection termination. Signed-off-by:
-
Sagi Grimberg authored
Using TX and RX CQs attached to the same vector might create a throttling effect coming from the serial processing of a work-queue. Use one CQ instead, it will do better in interrupt processing and it provides a simpler code. Also, We get rid of redundant isert_rx_wq. Next we can remove the atomic post_send_buf_count from the IO path. Signed-off-by:
-
Sagi Grimberg authored
A pre-step before going to a single CQ. Also this makes the code a little more simple to read. Signed-off-by:
-
Sagi Grimberg authored
Nit, uintptr_t is designed for pointer casting, use it. Signed-off-by:
-
Sagi Grimberg authored
As a pre-step to a single CQ, we unite the error completion handlers to a single handler. This patch does not change any functionality. Signed-off-by:
-
Sagi Grimberg authored
It is disabled at the moment, we will get that back in once the target is more stable. This reverts commit 95b60f07 "Add support for completion interrupt coalescing" Signed-off-by:
-
Sagi Grimberg authored
Currently we have no way to tell that the target stack is in shutdown sequence. In case we have open connections, the initiator immediately attempts to reconnect in a DDOS attack style, so we may end up terminating the iser enabled network portal while it's np_accept_list still have pending connections. The workaround is simply release all the connections in the list. A proper fix will be to start shutdown sequence by shutting the network portal to avoid initiator immediate reconnect attempts. But the temporary work around seems to work at this point, so I think we can do this for now... Reported-by:
Slava Shwartsman <valyushash@gmail.com> Signed-off-by:
-
Sagi Grimberg authored
iSER will report supported protection operations based on the tpg attribute t10_pi settings and HCA PI offload capabilities. If the HCA does not support PI offload or tpg attribute t10_pi is not set, we fall to SW PI mode. In order to do that, we move iscsit_get_sup_prot_ops after connection tpg assignment. Signed-off-by:
-
Sagi Grimberg authored
Fallback to software mode DIF if HCA does not support PI (without crashing obviously). It is still possible to run with backend protection and an unprotected frontend, so looking at the command prot_op is not enough. Check device PI capability on a per-IO basis (isert_prot_cmd inline static) to determine if we need to handle protection information. Trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffffa037f8b1>] isert_reg_sig_mr+0x351/0x3b0 [ib_isert] Call Trace: [<ffffffff812b003a>] ? swiotlb_map_sg_attrs+0x7a/0x130 [<ffffffffa038184d>] isert_reg_rdma+0x2fd/0x370 [ib_isert] [<ffffffff8108f2ec>] ? idle_balance+0x6c/0x2c0 [<ffffffffa0382b68>] isert_put_datain+0x68/0x210 [ib_isert] [<ffffffffa02acf5b>] lio_queue_data_in+0x2b/0x30 [iscsi_target_mod] [<ffffffffa02306eb>] target_complete_ok_work+0x21b/0x310 [target_core_mod] [<ffffffff8106ece2>] process_one_work+0x182/0x3b0 [<ffffffff8106fda0>] worker_thread+0x120/0x3c0 [<ffffffff8106fc80>] ? maybe_create_worker+0x190/0x190 [<ffffffff8107594e>] kthread+0xce/0xf0 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff8159a22c>] ret_from_fork+0x7c/0xb0 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70 Reported-by:
-
Sagi Grimberg authored
This patch converts to allocate PI contexts dynamically in order avoid a potentially bogus np->tpg_np and associated NULL pointer dereference in isert_connect_request() during iser-target endpoint shutdown with multiple network portals. Also, there is really no need to allocate these at connection establishment since it is not guaranteed that all the IOs on that connection will be to a PI formatted device. We can do it in a lazy fashion so the initial burst will have a transient slow down, but very fast all IOs will allocate a PI context. Squashed: iser-target: Centralize PI context handling code Signed-off-by:
-
Sagi Grimberg authored
In situations such as bond failover, The new session establishment implicitly invokes the termination of the old connection. So, we don't want to wait for the old connection wait_conn to completely terminate before we accept the new connection and post a login response. The solution is to deffer the comp_wait completion and the conn_put to a work so wait_conn will effectively be non-blocking (flush errors are assumed to come very fast). We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE to spread the concurrency of release works. Reported-by:
-
Sagi Grimberg authored
The np listener cm_id will also get ADDR_CHANGE event upcall (in case it is bound to a specific IP). Handle it correctly by creating a new cm_id and implicitly destroy the old one. Since this is the second event a listener np cm_id may encounter, we move the np cm_id event handling to a routine. Squashed: iser-target: Move cma_id setup to a function Reported-by:
-
Sagi Grimberg authored
Take isert_conn pointer from cm_id->qp->qp_context. This will allow us to know that the cm_id context is always the network portal. This will make the cm_id event check (connection or network portal) more reliable. In order to avoid a NULL dereference in cma_id->qp->qp_context we destroy the qp after we destroy the cm_id (and make the dereference safe). session stablishment/teardown sequences can happen in parallel, we should take into account that connected_handler might race with connection teardown flow. Also, protect isert_conn->conn_device->active_qps decrement within the error patch during QP creation failure and the normal teardown path in isert_connect_release(). Squashed: iser-target: Decrement completion context active_qps in error flow Signed-off-by:
-
Sagi Grimberg authored
There is no point in accepting a new CM request only when we are completely done with the last iscsi login. Instead we accept immediately, this will also cause the CM connection to reach connected state and the initiator is allowed to send the first login. We mark that we got the initial login and let iscsi layer pick it up when it gets there. This reduces the parallel login sequence by a factor of more then 4 (and more for multi-login) and also prevents the initiator (who does all logins in parallel) from giving up on login timeout expiration. In order to support multiple login requests sequence (CHAP) we call isert_rx_login_req from isert_rx_completion insead of letting isert_get_login_rx call it. Squashed: iser-target: Use kref_get_unless_zero in connected_handler iser-target: Acquire conn_mutex when changing connection state iser-target: Reject connect request in failure path Signed-off-by:
-
Sagi Grimberg authored
ISER_CONN_UP state is not sufficient to know if we should wait for completion of flush errors and disconnected_handler event. Instead, split it to 2 states: - ISER_CONN_UP: Got to CM connected phase, This state indicates that we need to wait for a CM disconnect event before going to teardown. - ISER_CONN_FULL_FEATURE: Got to full feature phase after we posted login response, This state indicates that we posted recv buffers and we need to wait for flush completions before going to teardown. Also avoid deffering disconnected handler to a work, and handle it within disconnected handler. More work here is needed to handle DEVICE_REMOVAL event correctly (cleanup all resources). Squashed: iser-target: Don't deffer disconnected handler to a work Signed-off-by:
-
Sagi Grimberg authored
Since commit 0fc4ea70 ("Target/iser: Don't put isert_conn inside disconnected handler") we put the conn kref in isert_wait_conn, so we need .wait_conn to be invoked also in the error path. Introduce call to isert_conn_terminate (called under lock) which transitions the connection state to TERMINATING and calls rdma_disconnect. If the state is already teminating, just bail out back (temination started). Also, make sure to destroy the connection when getting a connect error event if didn't get to connected (state UP). Same for the handling of REJECTED and UNREACHABLE cma events. Squashed: iscsi-target: Add call to wait_conn in establishment error flow Reported-by:
-
- 02 Dec, 2014 13 commits
-
-
Julia Lawall authored
Delete a local array that is only used to be initialized by memset. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; type T; @@ { ... when any -T x[...]; <+... when != x - memset(x,...); ...+> } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Lino Sanfilippo authored
In iscsi_target_init_module() unwind transport protocol registration in case that iscsit_load_discovery_tpg() failed. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by:
-
Hannes Reinecke authored
tcm_loop has the I_T nexus associated with the HBA. This causes commands to become misdirected if the HBA has more than one target portal group; any command is then being sent to the first target portal group instead of the correct one. The nexus needs to be associated with the target portal group instead. Signed-off-by:
Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> # 3.0+ Signed-off-by:
-
Nicholas Bellinger authored
Now that PSCSI is only exposing four hw_* read-only device attributes, go ahead and drop the left-over -> legacy PHBA_PDEV checks in various se_dev_set_* code, since it's now only used by virtual devices. Signed-off-by: -
Nicholas Bellinger authored
Now that backend drivers are populating their own device attributes, go ahead and remove left-over definitions + internal attribute list of device attributes from target_core_configfs.c code Also update TB_CIT_SETUP(dev_attrib,...) to signal ct_attr = NULL. Signed-off-by: -
Nicholas Bellinger authored
This patch converts PSCSI to use an external set of device attributes, and utilizes target_core_backend_configfs.h macros to generate a default set of configfs extended-attr handlers. It calls target_core_setup_sub_cits() to setup the initial config_item_type based on existing target_core_configfs.c defaults, and using configfs_attribute for hw_pi_prot_type, hw_block_size, hw_max_sectors, hw_queue_depth populates pscsi_backend_dev_attrs[] Only these four hw_* read-only device attributes are exports for PSCSI. Signed-off-by: -
Nicholas Bellinger authored
This patch converts TCM-USER to use an external set of device attributes, and utilizes target_core_backend_configfs.h macros to generate a default set of configfs extended-attr handlers. It calls target_core_setup_sub_cits() to setup the initial config_item_type based on existing target_core_configfs.c defaults, and using configfs_attribute generated by DEF_TB_DEFAULT_ATTRIBS(tcmu) populates tcmu_backend_dev_attrs[] It introduces no function change for existing TCMU device attributes. Signed-off-by: -
Nicholas Bellinger authored
This patch converts RAMDISK to use an external set of device attributes, and utilizes target_core_backend_configfs.h macros to generate a default set of configfs extended-attr handlers. It calls target_core_setup_sub_cits() to setup the initial config_item_type based on existing target_core_configfs.c defaults, and using configfs_attribute generated by DEF_TB_DEFAULT_ATTRIBS(rc_mcp) populates rd_mcp_backend_dev_attrs[] It introduces no functional change for existing RD_MCP device attributes. Signed-off-by: -
Nicholas Bellinger authored
This patch converts FILEIO to use an external set of device attributes, and utilizes target_core_backend_configfs.h macros to generate a default set of configfs extended-attr handlers. It calls target_core_setup_sub_cits() to setup the initial config_item_type based on existing target_core_configfs.c defaults, and using configfs_attribute generated by DEF_TB_DEFAULT_ATTRIBS(fileio) populates fileio_backend_dev_attrs[] It introduces no functional change for existing FILEIO device attributes. Signed-off-by: -
Nicholas Bellinger authored
This patch converts IBLOCK to use an external set of device attributes, and utilizes target_core_backend_configfs.h macros to generate a default set of configfs extended-attr handlers. It calls target_core_setup_sub_cits() to setup the initial config_item_type based on existing target_core_configfs.c defaults, and using configfs_attribute generated by DEF_TB_DEFAULT_ATTRIBS(iblock) populates iblock_backend_dev_attrs[] It introduces no functional change for existing IBLOCK device attributes. Signed-off-by: -
Nicholas Bellinger authored
This helper macro adds the default set of 30 device attributes for virtual devices from existing target_core_configfs.c code, and moves the definitions into a single macro to create the structs necessary for backend drivers. It allows them to populate their own external struct configfs_attribute for se_subsystem_api->tb_cits.tb_dev_attrib_cit.ct_attrs. Signed-off-by: -
Nicholas Bellinger authored
Now that target_core_backend_configfs.h macros will be using these se_dev_set attribute functions externally to allow backend drivers to populate different attributes, go ahead and add EXPORT_SYMBOL() for the existing default set of 30 device attributes. Also update target_core_backend.h with proper function prototypes. Signed-off-by: -
Nicholas Bellinger authored
This patch adds a number of configfs e-attr macros following what existing target_core_configfs.c code does for internal target_backend_dev_attrib setup, and similar to how target fabric drivers allow for external config_item_type + cit->ct_attrs. assignment. This is useful for backend drivers like PSCSI who need to only expose a small subset of device attributes, while still retaining a default list of attributes for other backend drivers like IBLOCK, FILEIO, RAMDISK, and TCMU. Signed-off-by:
-
