- 21 Dec, 2021 4 commits
-
-
Ben Hutchings authored
The help text for GOOGLE_FIRMWARE states that it should only be enabled when building a kernel for Google's own servers. However, many of the drivers dependent on it are also useful on Chromebooks or on any platform using coreboot. Update the help text to reflect this double duty. Fixes: d384d6f4 ("firmware: google memconsole: Add coreboot support") Reviewed-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Link: https://lore.kernel.org/r/20180618225540.GD14131@decadent.org.ukSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ajith P V authored
binder.c uses <asm/cacheflush.h> instead of <linux/cacheflush.h>. Hence change cacheflush header file to proper one. This change also avoid warning from checkpatch that shown below: WARNING: Use #include <linux/cacheflush.h> instead of <asm/cacheflush.h> Signed-off-by:
Ajith P V <ajithpv.linux@gmail.com> Link: https://lore.kernel.org/r/20211215132018.31522-1-ajithpv.linux@gmail.comSigned-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'coresight-next-v5.17' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux into char-misc-next Mathieu writes: Coresight changes for v5.17 This pull request includes: - A patch that uses devm_bitmap_zalloc() instead of the open-coded equivalent. - Work to make coresight complex configuration loadable via modules. - Some coresight documentation updates. Signed-off-by:Mathieu Poirier <mathieu.poirier@linaro.org> * tag 'coresight-next-v5.17' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux: coresight: core: Fix typo in a comment Documentation: coresight: Update coresight configuration docs coresight: configfs: Allow configfs to activate configuration coresight: syscfg: Example CoreSight configuration loadable module coresight: syscfg: Update load API for config loadable modules coresight: configuration: Update API to permit dynamic load/unload coresight: configuration: Update API to introduce load owner concept Documentation: coresight: Fix documentation issue coresight: Use devm_bitmap_zalloc when applicable
-
Greg Kroah-Hartman authored
Merge tag 'fpga-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: FPGA Manager changes for 5.17-rc1 Russ' patches rework the way we register FPGA managers, regions and bridges by simplifying the functions into a single register call. Nathan's patch addresses an unused variable warning that was introduced by Russ' patches. Yang's patch addresses a kernel doc warning. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of our for-next branch) without issues. Signed-off-by:
Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: region: fix kernel-doc fpga: stratix10-soc: Do not use ret uninitialized in s10_probe() fpga: region: Use standard dev_release for class driver fpga: bridge: Use standard dev_release for class driver fpga: mgr: Use standard dev_release for class driver
-
- 17 Dec, 2021 17 commits
-
-
David Collins authored
The qpnpint_irq_set_type() callback function configures the type (edge vs level) and polarity (high, low, or both) of a particular PMIC interrupt within a given peripheral. To do this, it reads the three consecutive IRQ configuration registers, modifies the specified IRQ bit within the register values, and finally writes the three modified register values back to the PMIC. While a spinlock is used to provide mutual exclusion on the SPMI bus during the register read and write calls, there is no locking around the overall read, modify, write sequence. This opens up the possibility of a race condition if two tasks set the type of a PMIC IRQ within the same peripheral simultaneously. When the race condition is encountered, both tasks will read the old value of the registers and IRQ bits set by one of the tasks will be dropped upon the register write of the other task. This then leads to PMIC IRQs being enabled with an incorrect type and polarity configured. Such misconfiguration can lead to an IRQ storm that overwhelms the system and causes it to crash. This race condition and IRQ storm have been observed when using a pair of pm8941-pwrkey devices to handle PMK8350 pwrkey and resin interrupts. The independent devices probe asynchronously in parallel and can simultaneously request and configure PMIC IRQs in the same PMIC peripheral. For a good case, the IRQ configuration calls end up serialized due to timing deltas and the register read/write sequence looks like this: 1. pwrkey probe: SPMI read(0x1311): 0x00, 0x00, 0x00 2. pwrkey probe: SPMI write(0x1311): 0x80, 0x80, 0x80 3. resin probe: SPMI read(0x1311): 0x80, 0x80, 0x80 4. resin probe: SPMI write(0x1311): 0xC0, 0xC0, 0xC0 The final register states after both devices have requested and enabled their respective IRQs is thus: 0x1311: 0xC0 0x1312: 0xC0 0x1313: 0xC0 0x1314: 0x00 0x1315: 0xC0 For a bad case, the IRQ configuration calls end up occurring simultaneously and the race condition is encountered. The register read/write sequence then looks like this: 1. pwrkey probe: SPMI read(0x1311): 0x00, 0x00, 0x00 2. resin probe: SPMI read(0x1311): 0x00, 0x00, 0x00 3. pwrkey probe: SPMI write(0x1311): 0x80, 0x80, 0x80 4. resin probe: SPMI write(0x1311): 0x40, 0x40, 0x40 In this case, the final register states after both devices have requested and enabled their respective IRQs is thus: 0x1311: 0x40 0x1312: 0x40 0x1313: 0x40 0x1314: 0x00 0x1315: 0xC0 This corresponds to the resin IRQ being configured for both rising and falling edges, as expected. However, the pwrkey IRQ is misconfigured as level type with both polarity high and low set to disabled. The PMIC IRQ triggering hardware treats this particular register configuration as if level low triggering is enabled. The raw pwrkey IRQ signal is low when the power key is not being pressed. Thus, the pwrkey IRQ begins firing continuously in an IRQ storm. Fix the race condition by holding the spmi-pmic-arb spinlock for the duration of the read, modify, write sequence performed in the qpnpint_irq_set_type() function. Split the pmic_arb_read_cmd() and pmic_arb_write_cmd() functions each into three parts so that hardware register IO is decoupled from spinlock locking. This allows a new function pmic_arb_masked_write() to be added which locks the spinlock and then calls register IO functions to perform SPMI read and write commands in a single atomic operation. Link: https://lore.kernel.org/r/20211118034719.28971-1-quic_collinsd@quicinc.comSigned-off-by:
David Collins <quic_collinsd@quicinc.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211216190812.1574801-7-sboyd@kernel.orgSigned-off-by:
-
James Lo authored
Add spmi support for MT8195. Refine indent in spmi-mtk-pmif.c. Link: https://lore.kernel.org/r/20211119034613.32489-5-james.lo@mediatek.comAcked-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
James Lo <james.lo@mediatek.com> Signed-off-by:
Henry Chen <henryc.chen@mediatek.com> Signed-off-by:
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Signed-off-by:
-
James Lo authored
Add spmi support for MT6873/8192. Refine indent in spmi-mtk-pmif.c. Link: https://lore.kernel.org/r/20211119034613.32489-4-james.lo@mediatek.comAcked-by:
-
James Lo authored
This adds documentation for the SPMI controller found on Mediatek SoCs. Link: https://lore.kernel.org/r/20211119034613.32489-3-james.lo@mediatek.comReviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
James Lo authored
'reg' is controller specific so we shouldn't even be specifying it here. Just remove it. Link: https://lore.kernel.org/r/20211119034613.32489-2-james.lo@mediatek.comReviewed-by:
-
Stephen Boyd authored
It's useful to know what particular device/component is having trouble accessing the bus. Add the sid and address to error messages here so that debugging is a little simpler. Link: https://lore.kernel.org/r/20210920234849.3614036-1-swboyd@chromium.org Cc: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Cc: satya priya <skakit@codeaurora.org> Reviewed-by:
Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by:
Satya Priya <skakit@codeaurora.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Thomas Perrot authored
Add support for EM919X modems, this modem series is based on SDX55 qcom chip. It is mandatory to use the same ring for control+data and diag events. Link: https://lore.kernel.org/r/20211123081541.648426-1-thomas.perrot@bootlin.comTested-by:
Aleksander Morgado <aleksander@aleksander.es> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211216081227.237749-11-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Kees Cook authored
The find.h APIs are designed to be used only on unsigned long arguments. This can technically result in a over-read, but it is harmless in this case. Regardless, fix it to avoid the warning seen under -Warray-bounds, which we'd like to enable globally: In file included from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/cpumask.h:5, from ./arch/x86/include/asm/msr.h:11, from ./arch/x86/include/asm/processor.h:22, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:60, from ./arch/x86/include/asm/preempt.h:7, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:55, from ./include/linux/wait.h:9, from ./include/linux/wait_bit.h:8, from ./include/linux/fs.h:6, from ./include/linux/debugfs.h:15, from drivers/bus/mhi/core/init.c:7: drivers/bus/mhi/core/init.c: In function 'to_mhi_pm_state_str': ./include/linux/find.h:187:37: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'enum mhi_pm_state[1]' [-Warray-bounds] 187 | unsigned long val = *addr & GENMASK(size - 1, 0); | ^~~~~ drivers/bus/mhi/core/init.c:80:51: note: while referencing 'state' 80 | const char *to_mhi_pm_state_str(enum mhi_pm_state state) | ~~~~~~~~~~~~~~~~~~^~~~~ Link: https://lore.kernel.org/r/20211215232446.2069794-1-keescook@chromium.org [mani: changed the variable name "bits" to "pm_state"] Reviewed-by:Kees Cook <keescook@chromium.org> Signed-off-by:
-
Manivannan Sadhasivam authored
Add a new API "mhi_prepare_for_transfer_autoqueue" for using with client drivers like QRTR to request MHI core to autoqueue buffers for the DL channel along with starting both UL and DL channels. So far, the "auto_queue" flag specified by the controller drivers in channel definition served this purpose but this will be removed at some point in future. Cc: netdev@vger.kernel.org Cc: Jakub Kicinski <kuba@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by:
Loic Poulain <loic.poulain@linaro.org> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Manivannan Sadhasivam authored
During SYS_ERR condition, as a response to the MHI_RESET from host, some devices tend to issue BHI interrupt without clearing the SYS_ERR state in the device. This creates a race condition and causes a failure in booting up the device. The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR handling in mhi_async_power_up(). Once the host detects that the device is in SYS_ERR state, it issues MHI_RESET and waits for the device to process the reset request. During this time, the device triggers the BHI interrupt to the host without clearing SYS_ERR condition. So the host starts handling the SYS_ERR condition again. To fix this issue, let's register the IRQ handler only after handling the SYS_ERR check to avoid getting spurious IRQs from the device. Fixes: e18d4e9f ("bus: mhi: core: Handle syserr during power_up") Cc: stable@vger.kernel.org Reported-by:
-
Bhaumik Bhatt authored
The 'wake-capable' entry in channel configuration is not set when parsing the configuration specified by the controller driver. Add the missing entry to ensure channel is correctly specified as a 'wake-capable' channel. Link: https://lore.kernel.org/r/1638320491-13382-1-git-send-email-quic_bbhatt@quicinc.com Fixes: 0cbf2608 ("bus: mhi: core: Add support for registering MHI controllers") Cc: stable@vger.kernel.org Reviewed-by:
Bhaumik Bhatt <quic_bbhatt@quicinc.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent and less verbose 'dma_set_mask_and_coherent()' call. Link: https://lore.kernel.org/r/bb3dc436fe142309a2334549db782c5ebb80a2be.1625718497.git.christophe.jaillet@wanadoo.frReviewed-by:
Hemant Kumar <hemantk@codeaurora.org> Reviewed-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Manivannan Sadhasivam authored
This patch fixes the below checkpatch warnings in MHI bus: WARNING: Possible repeated word: 'events' + /* Process ctrl events events */ WARNING: Missing a blank line after declarations + struct mhi_buf_info info = { }; + buf = kmalloc(len, GFP_KERNEL); WARNING: Move const after static - use 'static const struct mhi_pm_transitions' +static struct mhi_pm_transitions const dev_state_transitions[] = { Signed-off-by: -
Bhaumik Bhatt authored
The implementation for execution environment specific functionality is spread out. Use macros that help determine the paths to be taken. Link: https://lore.kernel.org/r/1636409978-31847-1-git-send-email-quic_bbhatt@quicinc.comReviewed-by:
Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by:
-
Loic Poulain authored
There is no reason for shutting down MHI ungracefully on freeze, this causes the MHI host stack & device stack to not be aligned anymore since the proper MHI reset sequence is not performed for ungraceful shutdown. Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org Fixes: 5f0c2ee1 ("bus: mhi: pci-generic: Fix hibernation") Cc: stable@vger.kernel.org Suggested-by:
-
Slark Xiao authored
Add new device ID 0xe0bf for T99W175. This device ID is created because it is using Qualcomm SDX55 new base line. Test evidence as below: root@jbd-ThinkPad-P1-Gen-4:/dev# lspci -nn | grep Foxconn 0000:08:00.0 Wireless controller [0d40]: Foxconn International, Inc. Device [105b:e0bf] root@jbd-ThinkPad-P1-Gen-4:/dev# cat wwan0at0 & echo -ne "ati\r" > wwan0at0 [2] 2977 root@jbd-ThinkPad-P1-Gen-4:/dev# ati Manufacturer: Qualcomm Model: T99W175 Revision: T99W175.F0.6.0.0.6.CC.005 1 [Oct 21 2021 10:00:00] IMEI: +GCAP: +CGSM OK Link: https://lore.kernel.org/r/20211029104918.3976-1-slark_xiao@163.comReviewed-by:
Slark Xiao <slark_xiao@163.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next Kees writes: lkdtm updates for v5.17-rc1 - Fix printk() usage during recursion (Ard Biesheuvel) - Fix rodata section to actually have contents (Christophe Leroy) - Add notes about lkdtm_kernel_info usage (Kees Cook) - Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro) * tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftest/lkdtm: Skip stack-entropy test if lkdtm is not available lkdtm: Fix content of section containing lkdtm_rodata_do_nothing() lkdtm: avoid printk() in recursive_loop() lkdtm: Note that lkdtm_kernel_info should be removed in the future
-
- 16 Dec, 2021 4 commits
-
-
Misono Tomohiro authored
Exit with return code 4 if lkdtm is not available like other tests in order to properly skip the test. Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by:
-
Christophe Leroy authored
On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA test leads to "Illegal instruction" failure. Looking at the content of rodata_objcopy.o, we see that the function content zeroes only: Disassembly of section .rodata: 0000000000000000 <.lkdtm_rodata_do_nothing>: 0: 00 00 00 00 .long 0x0 Add the contents flag in order to keep the content of the section while renaming it. Disassembly of section .rodata: 0000000000000000 <.lkdtm_rodata_do_nothing>: 0: 4e 80 00 20 blr Fixes: e9e08a07 ("lkdtm: support llvm-objcopy") Cc: stable@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Ard Biesheuvel authored
The recursive_loop() function is intended as a diagnostic to ensure that exhausting the stack is caught and mitigated. Currently, it uses pr_info() to ensure that the function has side effects that the compiler cannot simply optimize away, so that the stack footprint does not get reduced inadvertently. The typical mitigation for stack overflow is to kill the task, and this overflow may occur inside the call to pr_info(), which means it could be holding the console lock when this happens. This means that the console lock is never going to be released again, preventing the diagnostic prints related to the stack overflow handling from being visible on the console. So let's replace the call to pr_info() with a call to memzero_explicit(), which is not a 'magic' function name like memset() or memcpy(), which the compiler may replace with plain loads and stores. To ensure that the stack frames are nested rather than tail-called, put the call to memzero_explicit() after the recursive call. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Kees Cook authored
As per Linus's request, remove lkdtm_kernel_info once sufficient reporting exists in CI systems: https://lore.kernel.org/lkml/CAHk-=wiFvfkoFixTapvvyPMN9pq5G-+Dys2eSyBa1vzDGAO5+A@mail.gmail.com Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 13 Dec, 2021 2 commits
-
-
Jason Wang authored
The double `the' in the comment in line 732 is repeated. Remove one of them from the comment. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20211211090221.241529-1-wangborong@cdjrlc.com [Fixed capital letter in title] Signed-off-by:
-
Greg Kroah-Hartman authored
We need the fixes in here as well, and also resolve some merge conflicts in: drivers/misc/eeprom/at25.c Signed-off-by:
-
- 12 Dec, 2021 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.16-rc5. They include: - gadget driver fixes for reported issues - xhci fixes for reported problems. - config endpoint parsing fixes for where we got bitfields wrong Most of these have been in linux-next, the remaining few were not, but got lots of local testing in my systems and in some cloud testing infrastructures" * tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: config: using bit mask instead of individual bits usb: core: config: fix validation of wMaxPacketValue entries USB: gadget: zero allocate endpoint 0 buffers USB: gadget: detect too-big endpoint 0 requests xhci: avoid race between disable slot command and host runtime suspend xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a bunch of small char/misc and other driver subsystem fixes. Included in here are: - iio driver fixes for reported problems - phy driver fixes for a number of reported problems - mhi resume bugfix for broken hardware - nvmem driver fix - rtsx driver fix for irq issues - fastrpc packet parsing fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) bus: mhi: core: Add support for forced PM resume iio: trigger: stm32-timer: fix MODULE_ALIAS misc: rtsx: Avoid mangling IRQ during runtime PM nvmem: eeprom: at25: fix FRAM byte_len misc: fastrpc: fix improper packet size calculation MAINTAINERS: add maintainer for Qualcomm FastRPC driver bus: mhi: pci_generic: Fix device recovery failed issue iio: adc: stm32: fix null pointer on defer_probe error phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style iio: at91-sama5d2: Fix incorrect sign extension iio: adc: axp20x_adc: fix charging current reporting on AXP22x iio: gyro: adxrs290: fix data signedness phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns iio: ad7768-1: Call iio_trigger_notify_done() on error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two fixes for clock chip drivers: - A regression fix for the Designware APB timer. A recent change to the error checking code transformed the error condition wrongly so it turned into a fail if good condition. - Fix a clang build fail of the ARM architected timer driver" * tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic() clocksource/drivers/dw_apb_timer_of: Fix probe failure -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Fix the multi vector MSI allocation on Armada 370XP - Do interrupt acknowledgement correctly in the aspeed-scu driver - Make the IPR register offset correct in the NVIC driver - Make redistribution table flushing correct by issueing a SYNC command to ensure that the invalidation command has been executed - Plug a device tree node reference leak in the bcm7210-l2 driver - Trivial fixes in the MIPS GIC and the Apple AIC drivers" * tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node() irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL irqchip/apple-aic: Mark aic_init_smp() as __init irqchip: nvic: Fix offset for Interrupt Priority Offsets irqchip/mips-gic: Use bitfield helpers irqchip/aspeed-scu: Replace update_bits with write_bits. irqchip/armada-370-xp: Fix support for Multi-MSI interrupts irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix for the x86 scheduler topology: Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the scheduler towards the ATOM cluster as that has more total capacity. Use selection based on CPU priority instead" * tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched,x86: Don't use cluster topology for x86 hybrid CPUs
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky from Guo Ren: "Only one fix for csky: fix fpu config macro" * tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux: csky: fix typo of fpu config macro
-
Pavel Hofman authored
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for extracting multiple-transactions bits from wMaxPacketSize value. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.comSigned-off-by:
-
Pavel Hofman authored
The checks performed by commit aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") require that initial value of the maxp variable contains both maximum packet size bits (10..0) and multiple-transactions bits (12..11). However, the existing code assings only the maximum packet size bits. This patch assigns all bits of wMaxPacketSize to the variable. Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable <stable@vger.kernel.org> Acked-by:
-
Greg Kroah-Hartman authored
Under some conditions, USB gadget devices can show allocated buffer contents to a host. Fix this up by zero-allocating them so that any extra data will all just be zeros. Reported-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Tested-by:
-
Greg Kroah-Hartman authored
Sometimes USB hosts can ask for buffers that are too large from endpoint 0, which should not be allowed. If this happens for OUT requests, stall the endpoint, but for IN requests, trim the request size to the endpoint buffer size. Co-developed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers. Three are small and obvious, the qedi one is a bit larger but also pretty obvious" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Format log strings only if needed scsi: scsi_debug: Fix buffer size of REPORT ZONES command scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "This fixes a race between a readonly remount process and other processes that hold a file IOLOCK on files that previously experienced copy on write, that could result in severe filesystem corruption if the filesystem is then remounted rw. I think this is fairly rare (since the only reliable reproducer I have that fits the second criteria is the experimental xfs_scrub program), but the race is clear, so we still need to fix this. Summary: - Fix a data corruption vector that can result from the ro remount process failing to clear all speculative preallocations from files and the rw remount process not noticing the incomplete cleanup" * tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove all COW fork extents when remounting readonly
-
