'irq_handler' in gaudi2_enable_msix(), is just assigned with a function
name and then used when calling request_threaded_irq().
Remove the variable and use the function name directly as an argument.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

We later use cpucp packet for soft reset which might fail
so we should be able propagate the failure case.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Remove leading zeroes when printing the idle mask to make it clearer.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Make the comments align with the order of the fields in the structure
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

smatch reports
drivers/accel/habanalabs/common/device.c:2619:6: warning:
  symbol 'hl_capture_hw_err' was not declared. Should it be static?
drivers/accel/habanalabs/common/device.c:2641:6: warning:
  symbol 'hl_capture_fw_err' was not declared. Should it be static?

both are only used in device.c, so they should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Building with clang W=2 has several similar warnings
drivers/accel/habanalabs/common/decoder.c:46:51: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void
dec_error_intr_work(struct hl_device *hdev, u32 base_addr, u32 core_id)
                                                  ^
drivers/accel/habanalabs/common/security.h:13:26: note: previous declaration is here
extern struct hl_device *hdev;
                         ^

There is no global definition of hdev, so the extern is not needed.
Searched with
grep -r '^struct' . | grep hl_dev

Change to an forward decl to resolve these issues
drivers/accel/habanalabs/common/mmu/../security.h:133:40: error: ‘struct hl_device’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  133 |         bool (*skip_block_hook)(struct hl_device *hdev,
      |                                        ^~~~~~~~~
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The cpu accessible dma allocations use the gen_pool api which actually
does not allocate new memory from the system but manages memory already
allocated before. When tracing this together with real dma
allocation/free it cause confusing logs like a '0' dma address and
a cpu address appearing twice etc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

in the out_err flow, combine the two cases of soft-reset since
they have mostly common code. In addition unlock reset_info.lock
after touching reset count.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Because this field is only used for debug print,
we can do more precise debug directly instead.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

To match their description above the function
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Align assignment of reset_upon_device_release to the convention used
in this function.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

hl_irq_handler_default() is not used and can be removed.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

"eq_base[eq->ci].hdr.ctl" is used directly in a print without a
le32_to_cpu() conversion.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

In order for interrupt timestamp to be more accurate we should
capture it during the interrupt handling rather than in threaded
irq context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

We prefer not to handle the user interrupt job inside the interrupt
context. Instead, use threaded IRQ to handle the user interrupts.
This will allow to avoid disabling interrupts when the user process
registers for a new event and to avoid long handling inside an
interrupt.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

The policy file of the events reset has been modified.
This change is reflected in the autogenerated file.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

When getting an event, add the ability to deduce the reset type from
the IRQ map table instead of using hard reset regardless.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

The graceful reset mechanism is currently enabled only for reset
requests that will end up with hard-reset.
In future, reset requests due to errors in some device engines, are
going to be modified to request compute-reset, as the much longer
hard-reset is not really needed there.
To allow it, enable graceful reset also for compute-reset, and reset
after user releases the device won't be escalated to hard-reset in those
cases.
If watchdog expires and user didn't release the device, hard-reset will
be initiated in any case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

In case a compute reset has failed or a request for a hard reset has
just arrived, then we escalate current reset procedure from compute
to hard-reset.
In such a case, the FW should be aware of the updated error cause,
and if LKD is the one who performs the reset (rather than the FW),
then we ask the FW to disable PCI access.

We would also like to have relevant debug info and therefore
we print the currently escalating reset type.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

This commit minimizes the "chain of errors" displayed when memory
mapping fails.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Required to allow the TPC compiler to know on which offset of the index
space it works on.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

In order for engine cores to raise interrupts towards FW, They need
to know which register the event data should be written to.
Hence, we forward the relevant scratchpad register received during
dynamic regs handshake with FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Enhance the existing user notifications by adding a HW and FW critical
event bits to be used when a HW or FW event occur that requires
both SW abort and hard-resetting the chip.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

When user closes the compute device file descriptor without closing a
dma-buf file descriptor, the device will be considered as in use,
leading to hard reset and killing the user process, to ensure the
release of the dma-buf.
Same thing will happen if user first releases the compute device file
and only then the dma-buf.

The implication of this is the duration of hard reset, during which the
device cannot be reacquired.
Moreover, this behavior adds a constraint on a user process to follow
this order of release operations.

To avoid killing the user process and to remove this constraint, enforce
the correct order of release operations inside the driver, by
incrementing the device file refcount for any dma-buf until it is
released.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

When user closes the device file descriptor, it is checked whether the
device is still in use, and a message is printed if it is.
To make this message more informative, add to this print also the reason
due to which the device is considered as in use.
The possible reasons which are checked for now are active CS and
exported dma-buf.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

PSOC RAZWI handling code did not took into account single router that
supports several initiators with different XY coordinates. Also, it
ignored XY_HI coordinate. This caused 2 problems:
1. RAZWI handle ignored some initiators.
2. When getting PSOC RAZWI from some routers, there was a lot of
   possible engines which could have caused the RAZWI.

Fixed the above issue by handling PSOC RAZWI with both low and high
XY coordinates. This way driver supports all initiators and in
the worst case there are not more than 2 possible engines for RAZWI.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

The same mutex lock/unlock and counter decrementing in
hl_release_dmabuf() is already done in the memhash_node_export_put()
helper function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Make it easier to later add support for accel device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

It is more concise than to pass it to device init. Once we will add the
accel class, then we won't need to change the function signatures.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Move the cdev creation code from the main hdev init function to
a separate function. This will make the code more readable once we
add the accel registration code (instead/in addition to legacy
cdev).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

RAZWI handling routine is called from most EQ events,
no matter if a RAZWI happens or not.
This fix is added to verify the handler is called only if
a real RAZWI indication in HW has been detected.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Currently we support scenarios where a timestamp registration request
of a certain offset is received during the interrupt handling of the
same offset. In this case we give a grace period of up to 100us for
the interrupt handler to finish.
It seems that sometimes the interrupt handling takes more than expected,
and therefore this path should be optimized. Until that happens, let's
increase the grace period in order not to reach timeout which will
cause user call to be rejected.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>

Cross-subsystem Changes:
- MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander)

Driver Changes:
- Registers helpers and clean-ups. (Lucas)
- PXP fixes and clean-ups. (Alan, Alexander)
- CDCLK related fixes and w/a (Chaitanya, Stanislav)
- Move display code to use RMW whenever possible (Andrzej)
- PSR fixes (Jouni, Ville)
- Implement async_flip mode per plane tracking (Andrzej)
- Remove pre-production Workarounds (Matt)
- HDMI related fixes (Ankit)
- LVDS cleanup (Ville)
- Watermark fixes and cleanups (Ville, Jani, Stanilav)
- DMC code related fixes, cleanups and improvements (Jani)
- Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni)
- Initial DSB improvements targeting LUTs loading (Ville)
- HWMON related fixes (Ashutosh)
- PCI ID updates (Jonathan, Matt Roper)
- Fix leak in scatterlist (Matt Atwood)
- Fix eDP+DSI dual panel systems (Ville)
- Cast iomem to avoid sparese warnings (Jani)
- Set default backlight controller index (Jani)
- More MTL enabling (RK)
- Conversion of display dev_priv towards i915 (Nirmoy)
- Improvements in log/debug messages (Ville)
- Increase slice_height for DP VDSC (Suraj)
- VBT ports improvements (Ville)
- Fix platforms without Display (Imre)
- Other generic display code clean-ups (Ville, Jani, Rodrigo)
- Add RPL-U sub platform (Chaitanya)
- Add inverted backlight quirk for HP 14-r206nv (Mavroudis)
- Transcoder timing improvements (Ville)
- Track audio state per-transcoder (Ville)
- Error/underrun interrupt fixes (Ville)
- Update combo PHY init sequence (Matt Roper)
- Get HDR DPCD refresh timeout (Ville)
- Vblank improvements (Ville)
- DSS fixes and cleanups (Jani)
- PM code cleanup (Jani)
- Split display parts related to RPS (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com

drm-misc-next for v6.4-rc1:

Note: Only changes since pull request from 2023-02-23 are included here.

UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
   parsing.

Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.

Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
  purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
  locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
  for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
   and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
   gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.

Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
   nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com

This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tpm fixes from Jarkko Sakkinen:
 "Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: disable hwrng for fTPM on some AMD designs
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a0 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>