- 20 May, 2020 40 commits
-
-
Zefan Li authored
[ Upstream commit 090e28b2 ] If systemd is configured to use hybrid mode which enables the use of both cgroup v1 and v2, systemd will create new cgroup on both the default root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach task to the two cgroups. If the task does some network thing then the v2 cgroup can never be freed after the session exited. One of our machines ran into OOM due to this memory leak. In the scenario described above when sk_alloc() is called cgroup_sk_alloc() thought it's in v2 mode, so it stores the cgroup pointer in sk->sk_cgrp_data and increments the cgroup refcnt, but then sock_update_netprioidx() thought it's in v1 mode, so it stores netprioidx value in sk->sk_cgrp_data, so the cgroup refcnt will never be freed. Currently we do the mode switch when someone writes to the ifpriomap cgroup control file. The easiest fix is to also do the switch when a task is attached to a new cgroup. Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Tested-by:
Zefan Li <lizefan@huawei.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
[ Upstream commit 57644431 ] In commit b406472b ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") I missed the fact that a 0 'rate_tokens' will bypass the backoff algorithm. Since rate_tokens is cleared after a redirect silence, and never incremented on redirects, if the host keeps receiving packets requiring redirect it will reply ignoring the backoff. Additionally, the 'rate_last' field will be updated with the cadence of the ingress packet requiring redirect. If that rate is high enough, that will prevent the host from generating any other kind of ICMP messages The check for a zero 'rate_tokens' value was likely a shortcut to avoid the more complex backoff algorithm after a redirect silence period. Address the issue checking for 'n_redirects' instead, which is incremented on successful redirect, and does not interfere with other ICMP replies. Fixes: b406472b ("net: ipv4: avoid mixed n_redirects and rate_tokens usage") Reported-and-tested-by:
Colin Walters <walters@redhat.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit 09454fd0 ] This reverts commit 19bda36c: | ipv6: add mtu lock check in __ip6_rt_update_pmtu | | Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. | It leaded to that mtu lock doesn't really work when receiving the pkt | of ICMPV6_PKT_TOOBIG. | | This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 | did in __ip_rt_update_pmtu. The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work. There's already a comment to this effect elsewhere in the kernel: $ git grep -p -B1 -A3 'RTAX_MTU lock' net/ipv6/route.c=4813= static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg) ... /* In IPv6 pmtu discovery is not optional, so that RTAX_MTU lock cannot disable it. We still use this lock to block changes caused by addrconf/ndisc. */ This reverts to the pre-4.9 behaviour. Cc: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Fixes: 19bda36c ("ipv6: add mtu lock check in __ip6_rt_update_pmtu") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit eead1c2e ] The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by:
Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff2 ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit dd912306 ] syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event between bonding master and slave. I managed to find a reproducer for this: ip li set bond0 up ifenslave bond0 eth0 brctl addbr br0 ethtool -K eth0 lro off brctl addif br0 bond0 ip li set br0 up When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave, it captures this and calls bond_compute_features() to fixup its master's and other slaves' features. However, when syncing with its lower devices by netdev_sync_lower_features() this event is triggered again on slaves when the LRO feature fails to change, so it goes back and forth recursively until the kernel stack is exhausted. Commit 17b85d29 intentionally lets __netdev_update_features() return -1 for such a failure case, so we have to just rely on the existing check inside netdev_sync_lower_features() and skip NETDEV_FEAT_CHANGE event only for this specific failure case. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com Cc: Jarod Wilson <jarod@redhat.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jann Horn <jannh@google.com> Reviewed-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Linus Torvalds authored
commit adc71920 upstream. gcc-10 now warns about passing aliasing pointers to functions that take restricted pointers. That's actually a great warning, and if we ever start using 'restrict' in the kernel, it might be quite useful. But right now we don't, and it turns out that the only thing this warns about is an idiom where we have declared a few functions to be "printf-like" (which seems to make gcc pick up the restricted pointer thing), and then we print to the same buffer that we also use as an input. And people do that as an odd concatenation pattern, with code like this: #define sysfs_show_gen_prop(buffer, fmt, ...) \ snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) where we have 'buffer' as both the destination of the final result, and as the initial argument. Yes, it's a bit questionable. And outside of the kernel, people do have standard declarations like int snprintf( char *restrict buffer, size_t bufsz, const char *restrict format, ... ); where that output buffer is marked as a restrict pointer that cannot alias with any other arguments. But in the context of the kernel, that 'use snprintf() to concatenate to the end result' does work, and the pattern shows up in multiple places. And we have not marked our own version of snprintf() as taking restrict pointers, so the warning is incorrect for now, and gcc picks it up on its own. If we do start using 'restrict' in the kernel (and it might be a good idea if people find places where it matters), we'll need to figure out how to avoid this issue for snprintf and friends. But in the meantime, this warning is not useful. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 5a76021c upstream. This is the final array bounds warning removal for gcc-10 for now. Again, the warning is good, and we should re-enable all these warnings when we have converted all the legacy array declaration cases to flexible arrays. But in the meantime, it's just noise. Signed-off-by:
-
Linus Torvalds authored
commit 44720996 upstream. This is another fine warning, related to the 'zero-length-bounds' one, but hitting the same historical code in the kernel. Because C didn't historically support flexible array members, we have code that instead uses a one-sized array, the same way we have cases of zero-sized arrays. The one-sized arrays come from either not wanting to use the gcc zero-sized array extension, or from a slight convenience-feature, where particularly for strings, the size of the structure now includes the allocation for the final NUL character. So with a "char name[1];" at the end of a structure, you can do things like v = my_malloc(sizeof(struct vendor) + strlen(name)); and avoid the "+1" for the terminator. Yes, the modern way to do that is with a flexible array, and using 'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That also technically gets the size "more correct" in that it avoids any alignment (and thus padding) issues, but this is another long-term cleanup thing that will not happen for 5.7. So disable the warning for now, even though it's potentially quite useful. Having a slew of warnings that then hide more urgent new issues is not an improvement. Signed-off-by:
-
Linus Torvalds authored
commit 5c45de21 upstream. This is a fine warning, but we still have a number of zero-length arrays in the kernel that come from the traditional gcc extension. Yes, they are getting converted to flexible arrays, but in the meantime the gcc-10 warning about zero-length bounds is very verbose, and is hiding other issues. I missed one actual build failure because it was hidden among hundreds of lines of warning. Thankfully I caught it on the second go before pushing things out, but it convinced me that I really need to disable the new warnings for now. We'll hopefully be all done with our conversion to flexible arrays in the not too distant future, and we can then re-enable this warning. Signed-off-by:
-
Linus Torvalds authored
commit 1a263ae6 upstream. gcc-10 has started warning about conflicting types for a few new built-in functions, particularly 'free()'. This results in warnings like: crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch] because the crypto layer had its local freeing functions called 'free()'. Gcc-10 is in the wrong here, since that function is marked 'static', and thus there is no chance of confusion with any standard library function namespace. But the simplest thing to do is to just use a different name here, and avoid this gcc mis-feature. [ Side note: gcc knowing about 'free()' is in itself not the mis-feature: the semantics of 'free()' are special enough that a compiler can validly do special things when seeing it. So the mis-feature here is that gcc thinks that 'free()' is some restricted name, and you can't shadow it as a local static function. Making the special 'free()' semantics be a function attribute rather than tied to the name would be the much better model ] Signed-off-by:
-
Florian Fainelli authored
commit 55f53567 upstream. Our statistics strings are allocated at initialization without being bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using memcpy() which would create out of bounds accesses, this was flagged by KASAN. Replace this with strlcpy() to make sure we are bound the source buffer size and we also always NUL-terminate strings. Fixes: 2b2427d0 ("phy: micrel: Add ethtool statistics counters") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Linus Torvalds authored
commit 78a5255f upstream. We have some rather random rules about when we accept the "maybe-initialized" warnings, and when we don't. For example, we consider it unreliable for gcc versions < 4.9, but also if -O3 is enabled, or if optimizing for size. And then various kernel config options disabled it, because they know that they trigger that warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES). And now gcc-10 seems to be introducing a lot of those warnings too, so it falls under the same heading as 4.9 did. At the same time, we have a very straightforward way to _enable_ that warning when wanted: use "W=2" to enable more warnings. So stop playing these ad-hoc games, and just disable that warning by default, with the known and straight-forward "if you want to work on the extra compiler warnings, use W=123". Would it be great to have code that is always so obvious that it never confuses the compiler whether a variable is used initialized or not? Yes, it would. In a perfect world, the compilers would be smarter, and our source code would be simpler. That's currently not the world we live in, though. Signed-off-by:
-
Masahiro Yamada authored
commit b303c6df upstream. Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched various false positives: - commit e74fc973 ("Turn off -Wmaybe-uninitialized when building with -Os") turned off this option for -Os. - commit 815eb71e ("Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for CONFIG_PROFILE_ALL_BRANCHES - commit a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") turned off this option for GCC < 4.9 Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903 I think this looks better by shifting the logic from Makefile to Kconfig. Link: https://github.com/ClangBuiltLinux/linux/issues/350Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Linus Torvalds authored
commit 9d82973e upstream. Due to a bug-report that was compiler-dependent, I updated one of my machines to gcc-10. That shows a lot of new warnings. Happily they seem to be mostly the valid kind, but it's going to cause a round of churn for getting rid of them.. This is the really low-hanging fruit of removing a couple of zero-sized arrays in some core code. We have had a round of these patches before, and we'll have many more coming, and there is nothing special about these except that they were particularly trivial, and triggered more warnings than most. Signed-off-by:
-
Jason Gunthorpe authored
commit 01b2bafe upstream. Aside from good practice, this avoids a warning from gcc 10: ./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds] 997 | ((type *)(__mptr - offsetof(type, member))); }) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’ 493 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’ 275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list) | ^~~~~~~~~~ ./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’ 281 | (dev) != global_to_pnp_dev(&pnp_global); \ | ^~~~~~~~~~~~~~~~~ arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’ 189 | pnp_for_each_dev(dev) { Because the common code doesn't cast the starting list_head to the containing struct. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> [ rjw: Whitespace adjustments ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 6693ca95 ] In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey() without checking its return value. If ib_get_cached_pkey() returns an error code, these functions should return failure. Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Fixes: e622f2f4 ("IB: split struct ib_send_wr") Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.orgSigned-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 2c407aca ] gcc-10 warns around a suspicious access to an empty struct member: net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc': net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds] 1522 | memset(&ct->__nfct_init_offset[0], 0, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from net/netfilter/nf_conntrack_core.c:37: include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset' 90 | u8 __nfct_init_offset[0]; | ^~~~~~~~~~~~~~~~~~ The code is correct but a bit unusual. Rework it slightly in a way that does not trigger the warning, using an empty struct instead of an empty array. There are probably more elegant ways to do this, but this is the smallest change. Fixes: c41884ce ("netfilter: conntrack: avoid zeroing timer") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 37e31d2d ] The i40iw_arp_table() function can return -EOVERFLOW if i40iw_alloc_resource() fails so we can't just test for "== -1". Fixes: 4e9042e6 ("i40iw: add hw and utils files") Link: https://lore.kernel.org/r/20200422092211.GA195357@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Grace Kao authored
[ Upstream commit 69388e15 ] According to Braswell NDA Specification Update (#557593), concurrent read accesses may result in returning 0xffffffff and write instructions may be dropped. We have an established format for the commit references, i.e. cdca06e4 ("pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler") Fixes: 0bd50d71 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers") Signed-off-by:
Grace Kao <grace.kao@intel.com> Reported-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 5e698222 ] Commit 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by:
Andreas Schwab <schwab@suse.de> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Waiman Long <longman@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.comSigned-off-by:
-
Vasily Averin authored
[ Upstream commit 5b5703db ] v2: removed TODO reminder Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Kai Vehmanen authored
[ Upstream commit ca76282b ] A race exists between build_pcms() and build_controls() phases of codec setup. Build_pcms() sets up notifier for jack events. If a monitor event is received before build_controls() is run, the initial jack state is lost and never reported via mixer controls. The problem can be hit at least with SOF as the controller driver. SOF calls snd_hda_codec_build_controls() in its workqueue-based probe and this can be delayed enough to hit the race condition. Fix the issue by invalidating the per-pin ELD information when build_controls() is called. The existing call to hdmi_present_sense() will update the ELD contents. This ensures initial monitor state is correctly reflected via mixer controls. BugLink: https://github.com/thesofproject/linux/issues/1687Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 0c894463 ] When a channel configuration fails, the status of the channel is set to DEV_ERROR so that an attempt to submit it fails. However, this status sticks until the heat end of the universe, making it impossible to recover from the error. Let's reset it when the channel is released so that further use of the channel with correct configuration is not impacted. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.skSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 2e45676a ] pd->dma.dev is read in irq handler pd_irq(). However, it is set to pdev->dev after request_irq(). Therefore, set pd->dma.dev to pdev->dev before request_irq() to avoid data race between pch_dma_probe() and pd_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.comSigned-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit f2caf901 ] There is a race condition with how we send (or supress and don't send) smb echos that will cause the client to incorrectly think the server is unresponsive and thus needs to be reconnected. Summary of the race condition: 1) Daisy chaining scheduling creates a gap. 2) If traffic comes unfortunate shortly after the last echo, the planned echo is suppressed. 3) Due to the gap, the next echo transmission is delayed until after the timeout, which is set hard to twice the echo interval. This is fixed by changing the timeouts from 2 to three times the echo interval. Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remountSigned-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Samuel Cabrero authored
[ Upstream commit 76e75270 ] Some servers seem to accept connections while booting but never send the SMBNegotiate response neither close the connection, causing all processes accessing the share hang on uninterruptible sleep state. This happens when the cifs_demultiplex_thread detects the server is unresponsive so releases the socket and start trying to reconnect. At some point, the faulty server will accept the socket and the TCP status will be set to NeedNegotiate. The first issued command accessing the share will start the negotiation (pid 5828 below), but the response will never arrive so other commands will be blocked waiting on the mutex (pid 55352). This patch checks for unresponsive servers also on the negotiate stage releasing the socket and reconnecting if the response is not received and checking again the tcp state when the mutex is acquired. PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls" #0 [ffff880fd9add9f0] schedule at ffffffff81467eb9 #1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0 #2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a #3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs] #4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs] #5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs] .... Which is waiting a mutex owned by: PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx" #0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9 #1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs] #2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs] #3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs] #4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs] #5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs] #6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs] #7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs] .... Signed-off-by:
Samuel Cabrero <scabrero@suse.de> Reviewed-by:
Aurélien Aptel <aaptel@suse.de> Reviewed-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
wuxu.wu authored
commit 19b61392 upstream. dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by:
wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Wu Bo authored
commit 83c6f239 upstream. If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit dc30b405 ] The current gcc-10 snapshot produces a false-positive warning: net/core/drop_monitor.c: In function 'trace_drop_common.constprop': cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=] In file included from net/core/drop_monitor.c:23: include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here 36 | __u32 entries; | ^~~~~~~ I reported this in the gcc bugzilla, but in case it does not get fixed in the release, work around it by using a temporary variable. Fixes: 9a8afc8d ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit ee8d2267 ] Should an irq requested with 'devm_request_irq' be released explicitly, it should be done by 'devm_free_irq()', not 'free_irq()'. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 10e3cc18 ] A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()', called from 'sonic_probe1()'. This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix it and add the missing 'dma_free_coherent()' call. While at it, rename a label in order to be slightly more informative. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit ea0dfeb4 ] Recent commit 71725ed1 ("mm: huge tmpfs: try to split_huge_page() when punching hole") has allowed syzkaller to probe deeper, uncovering a long-standing lockdep issue between the irq-unsafe shmlock_user_lock, the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge(). user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants shmlock_user_lock while its caller shmem_lock() holds info->lock with interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock() with interrupts enabled, and might be interrupted by a writeback endio wanting xa_lock on i_pages. This may not risk an actual deadlock, since shmem inodes do not take part in writeback accounting, but there are several easy ways to avoid it. Requiring interrupts disabled for shmlock_user_lock would be easy, but it's a high-level global lock for which that seems inappropriate. Instead, recall that the use of info->lock to guard info->flags in shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode are already serialized by the caller. Take info->lock out of the chain and the possibility of deadlock or lockdep warning goes away. Fixes: 4595ef88 ("shmem: make shmem_inode_info::lock irq-safe") Reported-by: syzbot+c8a8197c8852f566b9d9@syzkaller.appspotmail.com Reported-by: syzbot+40b71e145e73f78f81ad@syzkaller.appspotmail.com Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2004161707410.16322@eggly.anvils Link: https://lore.kernel.org/lkml/000000000000e5838c05a3152f53@google.com/ Link: https://lore.kernel.org/lkml/0000000000003712b305a331d3b1@google.com/Signed-off-by:
-
Vladis Dronov authored
commit 75718584 upstream. There is a bug in ptp_clock_unregister(), where ptp_cleanup_pin_groups() first frees ptp->pin_{,dev_}attr, but then posix_clock_unregister() needs them to destroy a related sysfs device. These functions can not be just swapped, as posix_clock_unregister() frees ptp which is needed in the ptp_cleanup_pin_groups(). Fix this by calling ptp_cleanup_pin_groups() in ptp_clock_release(), right before ptp is freed. This makes this patch fix an UAF bug in a patch which fixes an UAF bug. Reported-by:
Antti Laakso <antti.laakso@intel.com> Fixes: a33121e5 ("ptp: fix the race between the release of ptp_clock and cdev") Link: https://lore.kernel.org/netdev/3d2bd09735dbdaf003585ca376b7c1e5b69a19bd.camel@intel.com/Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Vladis Dronov authored
commit a33121e5 upstream. In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#uAnalyzed-by:
Stephen Johnston <sjohnsto@redhat.com> Analyzed-by:
Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by:
-
YueHaibing authored
commit aea0a897 upstream. Fix smatch warning: drivers/ptp/ptp_clock.c:298 ptp_clock_register() warn: passing zero to 'ERR_PTR' 'err' should be set while device_create_with_groups and pps_register_source fails Fixes: 85a66e55 ("ptp: create "pins" together with the rest of attributes") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Logan Gunthorpe authored
commit 233ed09d upstream. Credit for this patch goes is shared with Dan Williams [1]. I've taken things one step further to make the helper function more useful and clean up calling code. There's a common pattern in the kernel whereby a struct cdev is placed in a structure along side a struct device which manages the life-cycle of both. In the naive approach, the reference counting is broken and the struct device can free everything before the chardev code is entirely released. Many developers have solved this problem by linking the internal kobjs in this fashion: cdev.kobj.parent = &parent_dev.kobj; The cdev code explicitly gets and puts a reference to it's kobj parent. So this seems like it was intended to be used this way. Dmitrty Torokhov first put this in place in 2012 with this commit: 2f0157f1 char_dev: pin parent kobject and the first instance of the fix was then done in the input subsystem in the following commit: 4a215aad Input: fix use-after-free introduced with dynamic minor changes Subsequently over the years, however, this issue seems to have tripped up multiple developers independently. For example, see these commits: 0d5b7dae iio: Prevent race between IIO chardev opening and IIO device (by Lars-Peter Clausen in 2013) ba0ef854 tpm: Fix initialization of the cdev (by Jason Gunthorpe in 2015) 5b28dde5 [media] media: fix use-after-free in cdev_put() when app exits after driver unbind (by Shauh Khan in 2016) This technique is similarly done in at least 15 places within the kernel and probably should have been done so in another, at least, 5 places. The kobj line also looks very suspect in that one would not expect drivers to have to mess with kobject internals in this way. Even highly experienced kernel developers can be surprised by this code, as seen in [2]. To help alleviate this situation, and hopefully prevent future wasted effort on this problem, this patch introduces a helper function to register a char device along with its parent struct device. This creates a more regular API for tying a char device to its parent without the developer having to set members in the underlying kobject. This patch introduce cdev_device_add and cdev_device_del which replaces a common pattern including setting the kobj parent, calling cdev_add and then calling device_add. It also introduces cdev_set_parent for the few cases that set the kobject parent without using device_add. [1] https://lkml.org/lkml/2017/2/13/700 [2] https://lkml.org/lkml/2017/2/10/370Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 85a66e55 upstream. Let's switch to using device_create_with_groups(), which will allow us to create "pins" attribute group together with the rest of ptp device attributes, and before userspace gets notified about ptp device creation. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit af59e717 upstream. Instead of creating selected attributes after the device is created (and after userspace potentially seen uevent), lets use attribute group is_visible() method to control which attributes are shown. This will allow us to create all attributes (except "pins" group, which will be taken care of later) before userspace gets notified about new ptp class device. Signed-off-by:
-
Dmitry Torokhov authored
commit 882f312d upstream. We do not need explicitly call dev_set_drvdata(), as it is done for us by device_create(). Acked-by:
-
Cengiz Can authored
commit 153031a3 upstream. There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86d ("blktrace: Protect q->blk_trace with RCU") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Cengiz Can <cengiz@kernel.wtf> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
