- 24 Oct, 2010 20 commits
-
-
Florian Fainelli authored
This patch adds support for reading NAND device ONFI parameters and use the ONFI informations to define its geometry. In case the device supports ONFI, the onfi_version field in struct nand_chip contains the version (BCD) and the onfi_params structure can be used by drivers to set up timings and such. We currently only support ONFI 1.0 parameters. Signed-off-by:
Brian Norris <norris@broadcom.com> Signed-off-by:
Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Florian Fainelli authored
This command is used to read the device ONFI parameters page. Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Kyungmin Park authored
S5PC110 OneNAND controller use the generic functions provided from onenand_base. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
There are some additions to the detection scheme used by Samsung MLC NAND. These simple changes to support the 400- and 436-byte OOB are found in the following data sheet: Samsung K9GBG08U0M (p.40) Signed-off-by:
Brian Norris <norris@broadcom.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Dan Carpenter authored
This code isn't reachable. I looked through the git history and it hasn't been reachable for years. Someone removed the label to silence gcc's unused label warning but these few lines accidentally got left behind. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Julia Lawall authored
Add a call to of_node_put in the error handling code following a call to of_find_compatible_node. Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Lei Wen authored
For different command need different oob requirement, set the proper oob length by different cmd. Signed-off-by:
Lei Wen <leiwen@marvell.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Lei Wen authored
After probe, all info already transfer to driver structure. There is no need to keep the original flash info. So that we could safely free the flash info in memory, which may grows larger when more flash is suported. Signed-off-by:
Lei Wen <leiwen@marvell.com> Signed-off-by:
Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Lei Wen authored
We certainly don't need to send read id command times by times, since we already know what the id is after the first read id... So create a default timing which could ensure it would successfully read id out all supported chip. Then follow the build-in table to reconfigure the timing. Signed-off-by:
Lei Wen <leiwen@marvell.com> Signed-off-by:
Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Lei Wen authored
Adding a new flash definition would need less code. Keep the platform passing flash definition method. If one flash is both defined in platform data and builtin table, driver would select the one from platform data first. By this way, platform could select the timing most suit for itself, not need to follow the common settings. Signed-off-by:
Lei Wen <leiwen@marvell.com> Signed-off-by:
Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Toshiba does not use ONFI for their NAND flash. So we have to continue to add new IDs used by Toshiba devices as well as heuristic detection for scanning the 2nd page for a BBM. This is a relatively harmless start at supporting many of them. These chips mostly follow the same ID fields of previous generations, but there is a need for a tweak. These chips introduce a strange 576 byte OOB (that's 36 bytes per 512 bytes of page). In the preliminary data, Toshiba has not defined exactly how their ID strings should decode. In the future, a new tweak must be added. Data is taken from, among others, Toshiba TC58TxG4S2FBAxx Signed-off-by:
Brian Norris <norris@broadcom.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
An increase in NAND_MAX_OOBSIZE and NAND_MAX_PAGESIZE is necessary in order to support many new chips. Among those: Toshiba TC58TxG4S2FBAxx 8KB page, 576B OOB Micron MT29F64G08CBAAA 8KB page, 448B OOB Signed-off-by:
Brian Norris <norris@broadcom.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
H Hartley Sweeten authored
Remove the MTD!=n dependency since that is handled by drivers/mtd/Kconfig. Simplify the dependency checks for mtd/chips by using if/endif blocks. Remove all default n since that is the Kconfig default. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
There were some improvements and additions necessary in the comments explaining of the expansion of nand_ecclayout, the introduction of nand_ecclayout_user, and the deprecation of the ioctl ECCGETLAYOUT. Also, I found a better placement for the macro MTD_MAX_ECCPOS_ENTRIES; next to the definition of MTD_MAX_OOBFREE_ENTRIES in mtd-abi.h. The macro is really only important for the ioctl code (found in drivers/mtd/mtdchar.c) but since there are small edits being made to the user-space header, I figured this is a better location. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
struct nand_ecclayout is too small for many new chips; OOB regions can be as large as 448 bytes and may increase more in the future. Thus, copying that struct to user-space with the ECCGETLAYOUT ioctl is not a good idea; the ioctl would have to be updated every time there's a change to the current largest size. Instead, the old nand_ecclayout is renamed to nand_ecclayout_user and a new struct nand_ecclayout is created that can accomodate larger sizes and expand without affecting the user-space. struct nand_ecclayout can still be used in board drivers without modification -- at least for now. A new function is provided to convert from the new to the old in order to allow the deprecated ioctl to continue to work with truncated data. Perhaps the ioctl, the conversion process, and the struct nand_ecclayout_user can be removed altogether in the future. Note: There are comments in nand/davinci_nand.c::nand_davinci_probe() regarding this issue; this driver (and maybe others) can be updated to account for extra space. All kernel drivers can use the expanded nand_ecclayout as a drop-in replacement and ignore its benefits. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Replaced some spaces with tabs to fit CodingStyle guidelines Signed-off-by:
Brian Norris <norris@broadcom.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Brian Norris authored
Some Spansion chips have a method for determining eraseblock size that is incompatible with similar ID chips of other sizes. This implements some heuristic detection of these differences. This patch checks for a 5-byte ID with trailing zeros as well as a 512-byte page size to ensure that chips are not misdetected as the S30MLxxxP ORNAND series. [Tweaked by Artem a bit] Signed-off-by:
Brian Norris <norris@broadcom.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
Baruch Siach authored
Drivers may (and do) return negative errno values other than -1 from the ecc.correct callback. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com>
-
- 29 Sep, 2010 2 commits
-
-
Linus Torvalds authored
-
David Howells authored
When caching is disabled on the MN10300 arch, the sys_cacheflush() function is removed by conditional stuff in the makefiles, but is still referred to by the syscall table. Provide a null version that just returns 0 when caching is disabled (or -EINVAL if the arguments are silly). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Sep, 2010 9 commits
-
-
Linus Torvalds authored
Tssk. Apparently Al hadn't checked commit c52c2ddc ("alpha: switch osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile. Fixed as per suggestions from Michael Cree. Reported-by:
Michael Cree <mcree@orcon.net.nz> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: fix module refcount breakage introduced by libahci split
-
Tejun Heo authored
libata depends on scsi_host_template for module reference counting and sht's should be owned by each low level driver. During libahci split, the sht was left with libahci.ko leaving the actual low level drivers not reference counted. This made ahci and ahci_platform always unloadable even while they're being actively used. Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for each low level ahci driver. stable: only applicable to 2.6.35. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Pedro Francisco <pedrogfrancisco@gmail.com> Tested-by:
Michael Tokarev <mjt@tls.msk.ru> Cc: stable@kernel.org Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon (coretemp): Fix build breakage if SMP is undefined
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
-
Guenter Roeck authored
Commit e40cc4bd introduced a build breakage if CONFIG_SMP is undefined. This commit fixes the problem. This fix is only a workaround. For a real fix, cpu_sibling_mask() should be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be included directly. This fix is currently not possible because asm/smp.h defines cpu_sibling_mask() unconditionally and is included directly from many source files. Reported-by:
Ingo Molnar <mingo@elte.hu> Tested-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile
-
David S. Miller authored
Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by:
Olaf Bonorden <bono@onlinehome.de> Reported-by:
Daniel Büse <dbuese@gmx.de> Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 27 Sep, 2010 9 commits
-
-
Dan Rosenberg authored
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by:
Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
The configuration choice for the port on which the GDB stub listens has a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to match the option. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sven Eckelmann authored
p9_virtio_create will only compare the the channel's tag characters against the device name till the end of the channel's tag but not till the end of the device name. This means that if a user defines channels with the tags foo and foobar then he would mount foo when he requested foonot and may mount foo when he requested foobar. Thus it is necessary to check both string lengths against each other in case of a successful partial string match. Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ondrej Zary authored
When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
Ulrich Weber authored
as done in ip_route_connect() Signed-off-by:
Ulrich Weber <uweber@astaro.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ulrich Weber authored
IPv4 and IPv6 have separate neighbour tables, so the warning messages should be distinguishable. [ Add a suitable message prefix on the ipv4 side as well -DaveM ] Signed-off-by:
Ulrich Weber <uweber@astaro.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
When TCP uses FACK algorithm to mark lost packets in tcp_mark_head_lost(), if the number of packets in the (TSO) skb is greater than the number of packets that should be marked lost, TCP incorrectly exits the loop and marks no packets lost in the skb. This underestimates tp->lost_out and affects the recovery/retransmission. This patch fargments the skb and marks the correct amount of packets lost. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb3: Turn off RX coalescing for iWARP connections
-