- 01 Apr, 2020 1 commit
-
-
Eric W. Biederman authored
Replace the 32bit exec_id with a 64bit exec_id to make it impossible to wrap the exec_id counter. With care an attacker can cause exec_id wrap and send arbitrary signals to a newly exec'd parent. This bypasses the signal sending checks if the parent changes their credentials during exec. The severity of this problem can been seen that in my limited testing of a 32bit exec_id it can take as little as 19s to exec 65536 times. Which means that it can take as little as 14 days to wrap a 32bit exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7 days. Even my slower timing is in the uptime of a typical server. Which means self_exec_id is simply a speed bump today, and if exec gets noticably faster self_exec_id won't even be a speed bump. Extending self_exec_id to 64bits introduces a problem on 32bit architectures where reading self_exec_id is no longer atomic and can take two read instructions. Which means that is is possible to hit a window where the read value of exec_id does not match the written value. So with very lucky timing after this change this still remains expoiltable. I have updated the update of exec_id on exec to use WRITE_ONCE and the read of exec_id in do_notify_parent to use READ_ONCE to make it clear that there is no locking between these two locations. Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl Fixes: 2.3.23pre2 Cc: stable@vger.kernel.org Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com>
-
- 25 Mar, 2020 15 commits
-
-
Eric W. Biederman authored
This is an infrastructure change that makes way for fixing this issue. Each patch was already posted previously so this is just a cleanup of the original mailing list thread(s) which got out of control by now. Everything started here: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ I added reviewed-by tags from the mailing list threads, except when withdrawn. It took a lot longer than expected to collect everything from the mailinglist threads, since several commit messages have been infected with typos, and they got fixed without a new patch version. - Correct the point of no return. - Add two new mutexes to replace cred_guard_mutex. - Fix each use of cred_guard_mutex. - Update documentation. - Add a test case. -- EWB Removed the last 2 patches they need more work Bernd Edlinger (9): exec: Fix a deadlock in strace selftests/ptrace: add test cases for dead-locks mm: docs: Fix a comment in process_vm_rw_core kernel: doc: remove outdated comment cred.c kernel/kcmp.c: Use new infrastructure to fix deadlocks in execve proc: Use new infrastructure to fix deadlocks in execve proc: io_accounting: Use new infrastructure to fix deadlocks in execve perf: Use new infrastructure to fix deadlocks in execve pidfd: Use new infrastructure to fix deadlocks in execve Eric W. Biederman (5): exec: Only compute current once in flush_old_exec exec: Factor unshare_sighand out of de_thread and call it separately exec: Move cleanup of posix timers on exec out of de_thread exec: Move exec_mmap right after de_thread in flush_old_exec exec: Add exec_update_mutex to replace cred_guard_mutex fs/exec.c | 78 +++++++++++++++++++--------- fs/proc/base.c | 10 ++-- include/linux/binfmts.h | 8 ++- include/linux/sched/signal.h | 9 +++- init/init_task.c | 1 + kernel/cred.c | 2 - kernel/events/core.c | 12 ++--- kernel/fork.c | 5 +- kernel/kcmp.c | 8 +-- kernel/pid.c | 4 +- mm/process_vm_access.c | 2 +- tools/testing/selftests/ptrace/Makefile | 4 +- tools/testing/selftests/ptrace/vmaccess.c | 86 +++++++++++++++++++++++++++++++ 13 files changed, 179 insertions(+), 50 deletions(-) Signed-off-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by:
-
Bernd Edlinger authored
This changes __pidfd_fget to use the new exec_update_mutex instead of cred_guard_mutex. This should be safe, as the credentials do not change before exec_update_mutex is locked. Therefore whatever file access is possible with holding the cred_guard_mutex here is also possbile with the exec_update_mutex. Signed-off-by:
-
Bernd Edlinger authored
This changes perf_event_set_clock to use the new exec_update_mutex instead of cred_guard_mutex. This should be safe, as the credentials are only used for reading. Signed-off-by:
-
Bernd Edlinger authored
This changes do_io_accounting to use the new exec_update_mutex instead of cred_guard_mutex. This fixes possible deadlocks when the trace is accessing /proc/$pid/io for instance. This should be safe, as the credentials are only used for reading. Signed-off-by:
-
Bernd Edlinger authored
This changes lock_trace to use the new exec_update_mutex instead of cred_guard_mutex. This fixes possible deadlocks when the trace is accessing /proc/$pid/stack for instance. This should be safe, as the credentials are only used for reading, and task->mm is updated on execve under the new exec_update_mutex. Signed-off-by:
-
Bernd Edlinger authored
This changes kcmp_epoll_target to use the new exec_update_mutex instead of cred_guard_mutex. This should be safe, as the credentials are only used for reading, and furthermore ->mm and ->sighand are updated on execve, but only under the new exec_update_mutex. Signed-off-by:
-
Bernd Edlinger authored
This removes an outdated comment in prepare_kernel_cred. There is no "cred_replace_mutex" any more, so the comment must go away. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bernd Edlinger authored
This removes a duplicate "a" in the comment in process_vm_rw_core. Signed-off-by:
-
Bernd Edlinger authored
This adds test cases for ptrace deadlocks. Additionally fixes a compile problem in get_syscall_info.c, observed with gcc-4.8.4: get_syscall_info.c: In function 'get_syscall_info': get_syscall_info.c:93:3: error: 'for' loop initial declarations are only allowed in C99 mode for (unsigned int i = 0; i < ARRAY_SIZE(args); ++i) { ^ get_syscall_info.c:93:3: note: use option -std=c99 or -std=gnu99 to compile your code Signed-off-by: -
Bernd Edlinger authored
This fixes a deadlock in the tracer when tracing a multi-threaded application that calls execve while more than one thread are running. I observed that when running strace on the gcc test suite, it always blocks after a while, when expect calls execve, because other threads have to be terminated. They send ptrace events, but the strace is no longer able to respond, since it is blocked in vm_access. The deadlock is always happening when strace needs to access the tracees process mmap, while another thread in the tracee starts to execve a child process, but that cannot continue until the PTRACE_EVENT_EXIT is handled and the WIFEXITED event is received: strace D 0 30614 30584 0x00000000 Call Trace: __schedule+0x3ce/0x6e0 schedule+0x5c/0xd0 schedule_preempt_disabled+0x15/0x20 __mutex_lock.isra.13+0x1ec/0x520 __mutex_lock_killable_slowpath+0x13/0x20 mutex_lock_killable+0x28/0x30 mm_access+0x27/0xa0 process_vm_rw_core.isra.3+0xff/0x550 process_vm_rw+0xdd/0xf0 __x64_sys_process_vm_readv+0x31/0x40 do_syscall_64+0x64/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 expect D 0 31933 30876 0x80004003 Call Trace: __schedule+0x3ce/0x6e0 schedule+0x5c/0xd0 flush_old_exec+0xc4/0x770 load_elf_binary+0x35a/0x16c0 search_binary_handler+0x97/0x1d0 __do_execve_file.isra.40+0x5d4/0x8a0 __x64_sys_execve+0x49/0x60 do_syscall_64+0x64/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This changes mm_access to use the new exec_update_mutex instead of cred_guard_mutex. This patch is based on the following patch by Eric W. Biederman: "[PATCH 0/5] Infrastructure to allow fixing exec deadlocks" Link: https://lore.kernel.org/lkml/87v9ne5y4y.fsf_-_@x220.int.ebiederm.org/Signed-off-by:
-
Eric W. Biederman authored
The cred_guard_mutex is problematic as it is held over possibly indefinite waits for userspace. The possible indefinite waits for userspace that I have identified are: The cred_guard_mutex is held in PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The cred_guard_mutex is held over "get_user(futex_offset, ...") in exit_robust_list. The cred_guard_mutex held over copy_strings. The functions get_user and put_user can trigger a page fault which can potentially wait indefinitely in the case of userfaultfd or if userspace implements part of the page fault path. In any of those cases the userspace process that the kernel is waiting for might make a different system call that winds up taking the cred_guard_mutex and result in deadlock. Holding a mutex over any of those possibly indefinite waits for userspace does not appear necessary. Add exec_update_mutex that will just cover updating the process during exec where the permissions and the objects pointed to by the task struct may be out of sync. The plan is to switch the users of cred_guard_mutex to exec_update_mutex one by one. This lets us move forward while still being careful and not introducing any regressions. Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/ Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/ Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/ Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/ Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/ Ref: 45c1a159 ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.") Ref: 456f17cd ("[PATCH] user-vm-unlock-2.5.31-A2") Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Eric W. Biederman authored
I have read through the code in exec_mmap and I do not see anything that depends on sighand or the sighand lock, or on signals in anyway so this should be safe. This rearrangement of code has two significant benefits. It makes the determination of passing the point of no return by testing bprm->mm accurate. All failures prior to that point in flush_old_exec are either truly recoverable or they are fatal. Further this consolidates all of the possible indefinite waits for userspace together at the top of flush_old_exec. The possible wait for a ptracer on PTRACE_EVENT_EXIT, the possible wait for a page fault to be resolved in clear_child_tid, and the possible wait for a page fault in exit_robust_list. This consolidation allows the creation of a mutex to replace cred_guard_mutex that is not held over possible indefinite userspace waits. Which will allow removing deadlock scenarios from the kernel. Signed-off-by:
-
Eric W. Biederman authored
These functions have very little to do with de_thread move them out of de_thread an into flush_old_exec proper so it can be more clearly seen what flush_old_exec is doing. Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by:
-
Eric W. Biederman authored
This makes the code clearer and makes it easier to implement a mutex that is not taken over any locations that may block indefinitely waiting for userspace. Signed-off-by:
-
Eric W. Biederman authored
Make it clear that current only needs to be computed once in flush_old_exec. This may have some efficiency improvements and it makes the code easier to change. Signed-off-by:
-
- 02 Mar, 2020 1 commit
-
-
Eric W. Biederman authored
accidentally broke it in the middle 2016. The problem is that because we perform an internal mount of proc before user space mounts proc all of the mount options that user specifies when mounting proc are ignored. You can set those mount options with a remount but that is rather surprising. This most directly affects android which is using hidpid=2 by default. Now that the sysctl system call support has been removed, and we have settled on way of flushing proc dentries when a process exits without using proc_mnt, there is an simple and easy fix. a) Give UML mconsole it's own private mount of proc to use. b) Stop creating the internal mount of proc We still need Alexey Gladkov's full patch to get proc mount options to work inside of UML, and to be generally useful. This set of changes is just enough to get them working as well as they have in the past. If anyone sees any problem with this code please let me know. Otherwise I plan to merge these set of fixes through my tree. Link: https://lore.kernel.org/lkml/87r21tuulj.fsf@x220.int.ebiederm.org/ Link: https://lore.kernel.org/lkml/871rqk2brn.fsf_-_@x220.int.ebiederm.org/ Link: https://lore.kernel.org/lkml/20200210150519.538333-1-gladkov.alexey@gmail.com/ Link: https://lore.kernel.org/lkml/20180611195744.154962-1-astrachan@google.com/ Fixes: e94591d0 ("proc: Convert proc_mount to use mount_ns.") Eric W. Biederman (4): uml: Don't consult current to find the proc_mnt in mconsole_proc uml: Create a private mount of proc for mconsole proc: Remove the now unnecessary internal mount of proc pid: Improve the comment about waiting in zap_pid_ns_processes arch/um/drivers/mconsole_kern.c | 28 +++++++++++++++++++++++++++- fs/proc/root.c | 36 ------------------------------------ include/linux/pid_namespace.h | 2 -- include/linux/proc_ns.h | 5 ----- kernel/pid.c | 8 -------- kernel/pid_namespace.c | 38 +++++++++++++++++++------------------- 6 files changed, 46 insertions(+), 71 deletions(-)
-
- 28 Feb, 2020 5 commits
-
-
Eric W. Biederman authored
Oleg wrote a very informative comment, but with the removal of proc_cleanup_work it is no longer accurate. Rewrite the comment so that it only talks about the details that are still relevant, and hopefully is a little clearer. Signed-off-by: -
Eric W. Biederman authored
There remains no more code in the kernel using pids_ns->proc_mnt, therefore remove it from the kernel. The big benefit of this change is that one of the most error prone and tricky parts of the pid namespace implementation, maintaining kernel mounts of proc is removed. In addition removing the unnecessary complexity of the kernel mount fixes a regression that caused the proc mount options to be ignored. Now that the initial mount of proc comes from userspace, those mount options are again honored. This fixes Android's usage of the proc hidepid option. Reported-by:
Alistair Strachan <astrachan@google.com> Fixes: e94591d0 ("proc: Convert proc_mount to use mount_ns.") Signed-off-by:
-
Eric W. Biederman authored
The mconsole code only ever accesses proc for the initial pid namespace. Instead of depending upon the proc_mnt which is for proc_flush_task have uml create it's own mount of proc instead. This allows proc_flush_task to evolve and remove the need for having a proc_mnt to do it's job. Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: -
Eric W. Biederman authored
Inspection of the control flow reveals that mconsole_proc is either called from mconsole_stop called from mc_work_proc or from mc_work_proc directly. The function mc_work_proc is dispatched to a kernel thread with schedule_work. All of the threads that run dispatched by schedule_work are in the init pid namespace. So make the code clearer and by using init_pid_ns instead of task_active_pid_ns(current). Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: -
Eric W. Biederman authored
Cleanly handling proc mount options require the internal mount of proc to be removed (so mount options are not ignored), and quite possibly multiple proc superblocks per pid namespace (so a second mount of proc does not silently get the mount options of the first mount of proc. In either case being able to flush proc dentries on process exit needs to be made to work without going through proc_mnt. After serveral discussions this is the set of changes that work and no one objects to. --- I have addressed all of the review comments as I understand them, and fixed the small oversight the kernel test robot was able to find. (I had failed to initialize the new field pid->inodes). I did not hear any concerns from the 10,000 foot level last time so I am assuming this set of changes (baring bugs) is good to go. Unless some new issues appear my plan is to put this in my tree and get this into linux-next. Which will give Alexey something to build his changes on. I tested this set of changes by running: (while ls -1 -f /proc > /dev/null ; do :; done ) & And monitoring the amount of free memory. With the flushing disabled I saw the used memory in the system grow by 20M before the shrinker would bring it back down to where it started. With the patch applied I saw the memory usage stay essentially fixed. So flushing definitely keeps things working better. Eric W. Biederman (6): proc: Rename in proc_inode rename sysctl_inodes sibling_inodes proc: Generalize proc_sys_prune_dcache into proc_prune_siblings_dcache proc: In proc_prune_siblings_dcache cache an aquired super block proc: Use d_invalidate in proc_prune_siblings_dcache proc: Clear the pieces of proc_inode that proc_evict_inode cares about proc: Use a list of inodes to flush from proc fs/proc/base.c | 111 ++++++++++++++++-------------------------------- fs/proc/inode.c | 73 ++++++++++++++++++++++++++++--- fs/proc/internal.h | 4 +- fs/proc/proc_sysctl.c | 45 +++----------------- include/linux/pid.h | 1 + include/linux/proc_fs.h | 4 +- kernel/exit.c | 4 +- kernel/pid.c | 1 + 8 files changed, 120 insertions(+), 123 deletions(-) Link: https://lore.kernel.org/lkml/871rqk2brn.fsf_-_@x220.int.ebiederm.org/Signed-off-by:
-
- 24 Feb, 2020 3 commits
-
-
Eric W. Biederman authored
Rework the flushing of proc to use a list of directory inodes that need to be flushed. The list is kept on struct pid not on struct task_struct, as there is a fixed connection between proc inodes and pids but at least for the case of de_thread the pid of a task_struct changes. This removes the dependency on proc_mnt which allows for different mounts of proc having different mount options even in the same pid namespace and this allows for the removal of proc_mnt which will trivially the first mount of proc to honor it's mount options. This flushing remains an optimization. The functions pid_delete_dentry and pid_revalidate ensure that ordinary dcache management will not attempt to use dentries past the point their respective task has died. When unused the shrinker will eventually be able to remove these dentries. There is a case in de_thread where proc_flush_pid can be called early for a given pid. Which winds up being safe (if suboptimal) as this is just an optiimization. Only pid directories are put on the list as the other per pid files are children of those directories and d_invalidate on the directory will get them as well. So that the pid can be used during flushing it's reference count is taken in release_task and dropped in proc_flush_pid. Further the call of proc_flush_pid is moved after the tasklist_lock is released in release_task so that it is certain that the pid has already been unhashed when flushing it taking place. This removes a small race where a dentry could recreated. As struct pid is supposed to be small and I need a per pid lock I reuse the only lock that currently exists in struct pid the the wait_pidfd.lock. The net result is that this adds all of this functionality with just a little extra list management overhead and a single extra pointer in struct pid. v2: Initialize pid->inodes. I somehow failed to get that initialization into the initial version of the patch. A boot failure was reported by "kernel test robot <lkp@intel.com>", and failure to initialize that pid->inodes matches all of the reported symptoms. Signed-off-by: -
Eric W. Biederman authored
This just keeps everything tidier, and allows for using flags like SLAB_TYPESAFE_BY_RCU where slabs are not always cleared before reuse. I don't see reuse without reinitializing happening with the proc_inode but I had a false alarm while reworking flushing of proc dentries and indoes when a process dies that caused me to tidy this up. The code is a little easier to follow and reason about this way so I figured the changes might as well be kept. Signed-off-by: -
Eric W. Biederman authored
The function d_prune_aliases has the problem that it will only prune aliases thare are completely unused. It will not remove aliases for the dcache or even think of removing mounts from the dcache. For that behavior d_invalidate is needed. To use d_invalidate replace d_prune_aliases with d_find_alias followed by d_invalidate and dput. For completeness the directory and the non-directory cases are separated because in theory (although not in currently in practice for proc) directories can only ever have a single dentry while non-directories can have hardlinks and thus multiple dentries. As part of this separation use d_find_any_alias for directories to spare d_find_alias the extra work of doing that. Plus the differences between d_find_any_alias and d_find_alias makes it clear why the directory and non-directory code and not share code. To make it clear these routines now invalidate dentries rename proc_prune_siblings_dache to proc_invalidate_siblings_dcache, and rename proc_sys_prune_dcache proc_sys_invalidate_dcache. V2: Split the directory and non-directory cases. To make this code robust to future changes in proc. Signed-off-by:
-
- 21 Feb, 2020 1 commit
-
-
Eric W. Biederman authored
Because there are likely to be several sysctls in a row on the same superblock cache the super_block after the count has been raised and don't deactivate it until we are processing another super_block. Signed-off-by:
-
- 20 Feb, 2020 2 commits
-
-
Eric W. Biederman authored
This prepares the way for allowing the pid part of proc to use this dcache pruning code as well. Signed-off-by: -
Eric W. Biederman authored
I about to need and use the same functionality for pid based inodes and there is no point in adding a second field when this field is already here and serving the same purporse. Just give the field a generic name so it is clear that it is no longer sysctl specific. Also for good measure initialize sibling_inodes when proc_inode is initialized. Signed-off-by:
-
- 16 Feb, 2020 10 commits
-
-
Linus Torvalds authored
-
https://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI update from Corey Minyard: "Minor bug fixes for IPMI I know this is late; I've been travelling and, well, I've been distracted. This is just a few bug fixes and adding i2c support to the IPMB driver, which is something I wanted from the beginning for it" * tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi: drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write ipmi:ssif: Handle a possible NULL pointer reference drivers: ipmi: Modify max length of IPMB packet drivers: ipmi: Support raw i2c packet in IPMB
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bugfixes and improvements to selftests. On top of this, Mauro converted the KVM documentation to rst format, which was very welcome" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits) docs: virt: guest-halt-polling.txt convert to ReST docs: kvm: review-checklist.txt: rename to ReST docs: kvm: Convert timekeeping.txt to ReST format docs: kvm: Convert s390-diag.txt to ReST format docs: kvm: Convert ppc-pv.txt to ReST format docs: kvm: Convert nested-vmx.txt to ReST format docs: kvm: Convert mmu.txt to ReST format docs: kvm: Convert locking.txt to ReST format docs: kvm: Convert hypercalls.txt to ReST format docs: kvm: arm/psci.txt: convert to ReST docs: kvm: convert arm/hyp-abi.txt to ReST docs: kvm: Convert api.txt to ReST format docs: kvm: convert devices/xive.txt to ReST docs: kvm: convert devices/xics.txt to ReST docs: kvm: convert devices/vm.txt to ReST docs: kvm: convert devices/vfio.txt to ReST docs: kvm: convert devices/vcpu.txt to ReST docs: kvm: convert devices/s390_flic.txt to ReST docs: kvm: convert devices/mpic.txt to ReST docs: kvm: convert devices/arm-vgit.txt to ReST ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: "Two fixes for use-after-free and memory leaking in the EDAC core, by Robert Richter. Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK unearthed issues with the lifespan of memory allocated by the EDAC memory controller descriptor due to misdesigned memory freeing, done partially by the EDAC core *and* the driver core, which is problematic to say the least. These two are minimal fixes to take care of stable - a proper rework is following which cleans up that mess properly" * tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/sysfs: Remove csrow objects on errors EDAC/mc: Fix use-after-free and memleaks during device removal
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Not a lot here, which is great, basically just three small bcache fixes from Coly, and four NVMe fixes via Keith" * tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block: nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme/pci: move cqe check after device shutdown nvme: prevent warning triggered by nvme_stop_keep_alive nvme/tcp: fix bug on double requeue when send fails bcache: remove macro nr_to_fifo_front() bcache: Revert "bcache: shrink btree node cache after bch_btree_check()" bcache: ignore pending signals when creating gc and allocator thread
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Two races fixed, memory leak fix, sysfs directory fixup and two new log messages: - two fixed race conditions: extent map merging and truncate vs fiemap - create the right sysfs directory with device information and move the individual device dirs under it - print messages when the tree-log is replayed at mount time or cannot be replayed on remount" * tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: sysfs, move device id directories to UUID/devinfo btrfs: sysfs, add UUID/devinfo kobject Btrfs: fix race between shrinking truncate and fiemap btrfs: log message when rw remount is attempted with unclean tree-log btrfs: print message when tree-log replay starts Btrfs: fix race between using extent maps and merging them btrfs: ref-verify: fix memory leaks -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable" * tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: make sure we do not overflow the max EA buffer size cifs: enable change notification for SMB2.1 dialect cifs: Fix mode output in debugging statements cifs: fix mount option display for sec=krb5i
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes (all stable fodder)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: improve explanation of a mount failure caused by a misconfigured kernel jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer jbd2: move the clearing of b_modified flag to the journal_unmap_buffer() ext4: add cond_resched() to ext4_protect_reserved_inode ext4: fix checksum errors with indexed dirs ext4: fix support for inode sizes > 1024 bytes ext4: simplify checking quota limits in ext4_statfs() ext4: don't assume that mmp_nodename/bdevname have NUL
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - a few drivers have been updated to use flexible-array syntax instead of GCC extension - ili210x touchscreen driver now supports the 2120 protocol flavor - a couple more of Synaptics devices have been switched over to RMI4 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list Input: synaptics - enable SMBus on ThinkPad L470 Input: synaptics - switch T470s to RMI4 by default Input: gpio_keys - replace zero-length array with flexible-array member Input: goldfish_events - replace zero-length array with flexible-array member Input: psmouse - switch to using i2c_new_scanned_device() Input: ili210x - add ili2120 support Input: ili210x - fix return value of is_visible function
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Not too much going on here, though there are about four fixes related to stuff merged during the last merge window. We also see the return of a syzkaller instance with access to RDMA devices, and a few bugs detected by that squished. - Fix three crashers and a memory memory leak for HFI1 - Several bugs found by syzkaller - A bug fix for the recent QP counters feature on older mlx5 HW - Locking inversion in cxgb4 - Unnecessary WARN_ON in siw - A umad crasher regression during unload, from a bug fix for something else - Bugs introduced in the merge window: - Missed list_del in uverbs file rework, core and mlx5 devx - Unexpected integer math truncation in the mlx5 VAR patches - Compilation bug fix for the VAR patches on 32 bit" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Use div64_u64 for num_var_hw_entries calculation RDMA/core: Fix protection fault in get_pkey_idx_qp_list RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq RDMA/mlx5: Prevent overflow in mmap offset calculations IB/umad: Fix kernel crash while unloading ib_umad RDMA/mlx5: Fix async events cleanup flows RDMA/core: Add missing list deletion on freeing event queue RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready() RDMA/iw_cxgb4: initiate CLOSE when entering TERM IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported RDMA/core: Fix invalid memory access in spec_filter_size IB/rdmavt: Reset all QPs when the device is shut down IB/hfi1: Close window for pq and request coliding IB/hfi1: Acquire lock to release TID entries when user file is closed RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create
-
- 15 Feb, 2020 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A handful of fixes that have come in since the merge window: - Fix of PCI interrupt map on arm64 fast model (SW emulator) - Fixlet for sound on ST platforms and a small cleanup of deprecated DT properties - A stack buffer overflow fix for moxtet - Fuse driver build fix for Tegra194 - A few config updates to turn on new drivers merged this cycle" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: bus: moxtet: fix potential stack buffer overflow soc/tegra: fuse: Fix build with Tegra194 configuration ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260 arm64: defconfig: Enable DRM_SUN6I_DSI arm64: defconfig: Enable CONFIG_SUN8I_THERMAL ARM: sunxi: Enable CONFIG_SUN8I_THERMAL arm64: defconfig: Set bcm2835-dma as built-in ARM: configs: Cleanup old Kconfig options ARM: npcm: Bring back GPIOLIB support arm64: dts: fast models: Fix FVP PCI interrupt-map property -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Vasily Gorbik: - Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu). - Fix protected key length update in PKEY_SEC2PROTK ioctl and increase card/queue requests counter to 64-bit in crypto code. - Fix clang warning in get_tod_clock. - Fix ultravisor info length extensions handling. - Fix style of SPDX License Identifier in vfio-ccw. - Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio. * tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: crypto/testmgr: enable selftests for paes-s390 ciphers s390/time: Fix clk type in get_tod_clock s390/uv: Fix handling of length extensions s390/qdio: don't allocate *aob array with GFP_ATOMIC s390/qdio: simplify ACK tracking s390/zcrypt: fix card and queue total counter wrap s390/pkey: fix missing length of protected key on return vfio-ccw: Use the correct style for SPDX License Identifier
-
