Allow a remote processor that was started by another entity to be
switched off by the remoteproc core.  For that to happen a
rproc::ops::stop() operation needs to be available.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-16-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch takes into account scenarios where a remote processor
has been attached to when receiving a "start" command from sysfs.

As with the case with the running state, the command can't be
carried out if the remote processor is already in operation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-15-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The panic handler operation of registered remote processors
should also be called when remote processors have been
attached to.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-14-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

When a remote processor that was attached to is stopped, special care
must be taken to make sure the shutdown process is similar to what
it would be had it been started by the remoteproc core.

This patch takes care of that by making a copy of the resource
table currently used by the remote processor.  From that point on
the copy is used, as if the remote processor had been started by
the remoteproc core.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-13-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

If it is possible to detach the remote processor, keep an untouched
copy of the resource table.  That way we can start from the same
resource table without having to worry about original values or what
elements the startup code has changed when re-attaching to the remote
processor.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-12-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Introduce function rproc_detach() to enable the remoteproc
core to release the resources associated with a remote processor
without stopping its operation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-11-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Introduce function __rproc_detach() to perform the same kind of
operation as rproc_stop(), but instead of switching off the
remote processor using rproc->ops->stop(), it uses
rproc->ops->detach().  That way it is possible for the core
to release the resources associated with a remote processor while
the latter is kept operating.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-10-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add an new detach() operation in order to support scenarios where
the remoteproc core is going away but the remote processor is
kept operating.  This could be the case when the system is
rebooted or when the platform driver is removed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-9-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Some actions such as memory resources reallocation are needed when
trying to reattach a co-processor. Use the prepare() operation for
these actions.
Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud POULIQUEN <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-8-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Move the setting of the resource table installed by an external
entity to rproc_ops::get_loaded_rsc_table().  This is to support
scenarios where a remote processor has been attached to but is
detached at a later stage.  To re-attach the remote processor,
the address of the resource table needs to be available
at a later time than the platform driver's probe() function.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-7-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it.  When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-6-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

There is a need to know when a remote processor has been attached
to rather than booted by the remoteproc core.  In order to avoid
manipulating two variables, i.e rproc::autonomous and
rproc::state, get rid of the former and simply use the newly
introduced RPROC_ATTACHED state.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-5-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add a new RPROC_ATTACHED state to take into account scenarios
where the remoteproc core needs to attach to a remote processor
that is booted by another entity.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-4-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Rename function rproc_actuate() to rproc_attach().  That way it is
easy to understand that it does the opposite of rproc_detach().
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-3-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Whether started at probe() time or thereafter from the command
line, a remote processor needs to be shut down before the final
cleanup phases can happen.  Otherwise the system may be left in
an unpredictable state where the remote processor is expecting
the remoteproc core to be providing services when in fact it
no longer exist.

Invariably calling rproc_shutdown() is fine since it will return
immediately if the remote processor has already been switched
off.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-2-mathieu.poirier@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Analog to the issue in the common mdt_loader code the MSS ELF loader
does not validate that p_filesz bytes will fit in the memory region and
that the loaded segments are not truncated. Fix this in the same way
as proposed for the mdt_loader.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 135b9e8d ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load")
Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Failing to read the "firmware-name" DT property without informing the
developer is annoying, add some helpful debug prints.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210312002605.3273255-1-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Fixes: ecadcc47 ("remoteproc: imx_rproc: use devm_ioremap")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210312080420.277151-1-weiyongjun1@huawei.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Use virtio/mailbox to build connection between Remote Proccessors
and Linux. Add work queue to handle incoming messages.
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirer@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-11-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

vdev regions are vdev0vring0, vdev0vring1, vdevbuffer and similar.
They are handled by remoteproc common code, no need to map in imx
rproc driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1615029865-23312-10-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add i.MX8MQ dev/sys addr map and configuration data structure
i.MX8MM share i.MX8MQ settings.
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-9-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The hook is used to parse memory-regions and load resource table
from the address the remote processor published.
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-8-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We might need to map an region multiple times, becaue the region might
be shared between remote processors, such i.MX8QM with dual M4 cores.
So use devm_ioremap, not devm_ioremap_resource.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/1615029865-23312-7-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

It is using devm_ioremap, so not devm_ioremap_resource. Correct
the error message and print out sa/size.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-6-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Introduce an extra parameter is_iomem to da_to_va, then the caller
could take the memory as normal memory or io mapped memory.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Introduce is_iomem to indicate this piece memory is iomem or not.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-4-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add i.MX8MQ/M support, also include mailbox for rpmsg/virtio usage.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-3-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Convert the imx rproc binding to DT schema format using json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1615029865-23312-2-git-send-email-peng.fan@oss.nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

There are four different callback functions that are used for the
rproc_handle_resource_t callback that all have different second
parameter types.

rproc_handle_vdev -> struct fw_rsc_vdev
rproc_handle_trace -> struct fw_rsc_trace
rproc_handle_devmem -> struct fw_rsc_devmem
rproc_handle_carveout -> struct fw_rsc_carveout

These callbacks are cast to rproc_handle_resource_t so that there is no
error about incompatible pointer types. Unfortunately, this is a Clang's
Control-Flow Integrity checking violation, which verifies that the
callback function's types match the prototypes exactly before jumping.

[    7.275750] Kernel panic - not syncing: CFI failure (target: rproc_handle_vdev+0x0/0x4)
[    7.283763] CPU: 2 PID: 1 Comm: init Tainted: G         C O      5.4.70-03301-g527af2c96672 #17
[    7.292463] Hardware name: NXP i.MX8MPlus EVK board (DT)
[    7.297779] Call trace:
[    7.300232]  dump_backtrace.cfi_jt+0x0/0x4
[    7.304337]  show_stack+0x18/0x24
[    7.307660]  dump_stack+0xb8/0x114
[    7.311069]  panic+0x164/0x3d4
[    7.314130]  __ubsan_handle_cfi_check_fail_abort+0x0/0x14
[    7.319533]  perf_proc_update_handler+0x0/0xcc
[    7.323983]  __cfi_check+0x63278/0x6a290
[    7.327913]  rproc_boot+0x3f8/0x738
[    7.331404]  rproc_add+0x68/0x110
[    7.334738]  imx_rproc_probe+0x5e4/0x708 [imx_rproc]
[    7.339711]  platform_drv_probe+0xac/0xf0
[    7.343726]  really_probe+0x260/0x65c
[    7.347393]  driver_probe_device+0x64/0x100
[    7.351580]  device_driver_attach+0x6c/0xac
[    7.355766]  __driver_attach+0xdc/0x184
[    7.359609]  bus_for_each_dev+0x98/0x104
[    7.363537]  driver_attach+0x24/0x30
[    7.367117]  bus_add_driver+0x100/0x1e0
[    7.370958]  driver_register+0x78/0x114
[    7.374800]  __platform_driver_register+0x44/0x50
[    7.379514]  init_module+0x20/0xfe8 [imx_rproc]
[    7.384049]  do_one_initcall+0x190/0x348
[    7.387979]  do_init_module+0x5c/0x210
[    7.391731]  load_module+0x2fbc/0x3590
[    7.395485]  __arm64_sys_finit_module+0xb8/0xec
[    7.400025]  el0_svc_common+0xb4/0x19c
[    7.403777]  el0_svc_handler+0x74/0x98
[    7.407531]  el0_svc+0x8/0xc
[    7.410419] SMP: stopping secondary CPUs
[    7.414648] Kernel Offset: disabled
[    7.418142] CPU features: 0x00010002,2000200c
[    7.422501] Memory Limit: none

To fix this, change the second parameter of all functions to void * and
use a local variable with the correct type so that everything works
properly. With this, we can remove casting to rproc_handle_resource_t
for these functions.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210224055825.7417-1-jindong.yue@nxp.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Fix the following coccicheck warning:
./drivers/remoteproc/pru_rproc.c:247:0-23: WARNING:
pru_rproc_debug_ss_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1614154829-42461-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

For security reasons sysfs_emit() is preferred over sprintf().
Hence, convert the remoteproc's sysfs show functions accordingly.
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Link: https://lore.kernel.org/r/1614808022-26062-1-git-send-email-sidgup@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()

Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size

Pull block fixes from Jens Axboe:

 - NVMe fixes:
      - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
        Terjan)
      - fix a hwmon error return (Daniel Wagner)
      - fix the keep alive timeout initialization (Martin George)
      - ensure the model_number can't be changed on a used subsystem
        (Max Gurtovoy)

 - rsxx missing -EFAULT on copy_to_user() failure (Dan)

 - rsxx remove unused linux.h include (Tian)

 - kill unused RQF_SORTED (Jean)

 - updated outdated BFQ comments (Joseph)

 - revert work-around commit for bd_size_lock, since we removed the
   offending user in this merge window (Damien)

* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
  rsxx: Return -EFAULT if copy_to_user() fails
  block/bfq: update comments and default value in docs for fifo_expire
  rsxx: remove unused including <linux/version.h>
  block: Drop leftover references to RQF_SORTED
  block: revert "block: fix bd_size_lock use"

Pull io_uring fixes from Jens Axboe:
 "A bit of a mix between fallout from the worker change, cleanups and
  reductions now possible from that change, and fixes in general. In
  detail:

   - Fully serialize manager and worker creation, fixing races due to
     that.

   - Clean up some naming that had gone stale.

   - SQPOLL fixes.

   - Fix race condition around task_work rework that went into this
     merge window.

   - Implement unshare. Used for when the original task does unshare(2)
     or setuid/seteuid and friends, drops the original workers and forks
     new ones.

   - Drop the only remaining piece of state shuffling we had left, which
     was cred. Move it into issue instead, and we can drop all of that
     code too.

   - Kill f_op->flush() usage. That was such a nasty hack that we had
     out of necessity, we no longer need it.

   - Following from ->flush() removal, we can also drop various bits of
     ctx state related to SQPOLL and cancelations.

   - Fix an issue with IOPOLL retry, which originally was fallout from a
     filemap change (removing iov_iter_revert()), but uncovered an issue
     with iovec re-import too late.

   - Fix an issue with system suspend.

   - Use xchg() for fallback work, instead of cmpxchg().

   - Properly destroy io-wq on exec.

   - Add create_io_thread() core helper, and use that in io-wq and
     io_uring. This allows us to remove various silly completion events
     related to thread setup.

   - A few error handling fixes.

  This should be the grunt of fixes necessary for the new workers, next
  week should be quieter. We've got a pending series from Pavel on
  cancelations, and how tasks and rings are indexed. Outside of that,
  should just be minor fixes. Even with these fixes, we're still killing
  a net ~80 lines"

* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
  io_uring: don't restrict issue_flags for io_openat
  io_uring: make SQPOLL thread parking saner
  io-wq: kill hashed waitqueue before manager exits
  io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
  io_uring: don't keep looping for more events if we can't flush overflow
  io_uring: move to using create_io_thread()
  kernel: provide create_io_thread() helper
  io_uring: reliably cancel linked timeouts
  io_uring: cancel-match based on flags
  io-wq: ensure all pending work is canceled on exit
  io_uring: ensure that threads freeze on suspend
  io_uring: remove extra in_idle wake up
  io_uring: inline __io_queue_async_work()
  io_uring: inline io_req_clean_work()
  io_uring: choose right tctx->io_wq for try cancel
  io_uring: fix -EAGAIN retry with IOPOLL
  io-wq: fix error path leak of buffered write hash map
  io_uring: remove sqo_task
  io_uring: kill sqo_dead and sqo submission halting
  io_uring: ignore double poll add on the same waitqueue head
  ...

Pull power management fixes from Rafael Wysocki:
 "These fix the usage of device links in the runtime PM core code and
  update the DTPM (Dynamic Thermal Power Management) feature added
  recently.

  Specifics:

   - Make the runtime PM core code avoid attempting to suspend supplier
     devices before updating the PM-runtime status of a consumer to
     'suspended' (Rafael Wysocki).

   - Fix DTPM (Dynamic Thermal Power Management) root node
     initialization and label that feature as EXPERIMENTAL in Kconfig
     (Daniel Lezcano)"

* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization
  PM: runtime: Update device status before letting suppliers suspend

Pull ACPI fix from Rafael Wysocki:
 "Make the empty stubs of some helper functions used when CONFIG_ACPI is
  not set actually match those functions (Andy Shevchenko)"

* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Constify is_acpi_node() and friends (part 2)