DMA buffers of 2D/3D engines aren't mapped properly when
CONFIG_ARM_DMA_USE_IOMMU=y. The memory management code of Tegra DRM driver
has a longstanding overhaul overdue and it's not obvious where the problem
is in this case. Hence let's add back the old workaround which we already
had sometime before. It explicitly detaches DRM devices from the offending
implicit IOMMU domain. This fixes a completely broken 2d/3d drivers in
case of ARM32 multiplatform kernel config.

Cc: stable@vger.kernel.org
Fixes: fa6661b7 ("drm/tegra: Optionally attach clients to the IOMMU")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Host1x DMA buffer isn't mapped properly when CONFIG_ARM_DMA_USE_IOMMU=y.
The memory management code of Host1x driver has a longstanding overhaul
overdue and it's not obvious where the problem is in this case. Hence
let's add back the old workaround which we already had sometime before.
It explicitly detaches Host1x device from the offending implicit IOMMU
domain. This fixes a completely broken Host1x DMA in case of ARM32
multiplatform kernel config.

Cc: stable@vger.kernel.org
Fixes: af1cbfb9 ("gpu: host1x: Support DMA mapping of buffers")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move runtime PM management of older UAPI code paths into the common place.
This removes boilerplate code from client drivers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Runtime PM is now universally available, make it mandatory by removing
the pm_runtime_enabled() checks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

CDMA must be stopped before hardware is suspended. Add channel stopping
to RPM suspend callback. Add system level suspend-resume callbacks.

Runtime PM initialization is moved to host1x client init phase because
RPM callback now uses host1x channel that is available only when host1x
client is registered.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

CDMA must be stopped before hardware is suspended. Add channel stopping
to RPM suspend callback. Add system level suspend-resume callbacks.

Runtime PM initialization is moved to host1x client init phase because
RPM callback now uses host1x channel that is available only when host1x
client is registered.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add runtime power management and support generic power domains.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add runtime power management and support generic power domains.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The HDMI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now HDMI driver must use
OPP API for driving the controller's clock rate because OPP API takes
care of reconfiguring the domain's performance state based on HDMI clock
rate. Add OPP support to the HDMI driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add OPP and SoC core voltage scaling support to the display controller
driver. This is required for enabling system-wide DVFS on pre-Tegra186
SoCs.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Runtime PM auto-suspension doesn't work without pm_runtime_mark_last_busy(),
add it.

Cc: <stable@vger.kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add host1x_channel_stop() which waits till channel becomes idle and then
stops the channel hardware. This is needed for supporting suspend/resume
by host1x drivers since the hardware state is lost after power-gating,
thus the channel needs to be stopped before client enters into suspend.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add runtime PM and OPP support to the Host1x driver. For the starter we
will keep host1x always-on because dynamic power management require a major
refactoring of the driver code since lot's of code paths are missing the
RPM handling and we're going to remove some of these paths in the future.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function can return one of several errors in an ERR_PTR()-encoded
pointer, so make sure to propogate those on failure.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Host1x seems to be relying on picking up dma-mapping.h transitively from
iova.h, which has no reason to include it in the first place. Fix the
former issue before we totally break things by fixing the latter one.

CC: Thierry Reding <thierry.reding@gmail.com>
CC: Mikko Perttunen <mperttunen@nvidia.com>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Upon failure, dma_alloc_coherent() returns NULL. If that does happen,
passing some uninitialised stack contents to dma_mapping_error() - which
belongs to a different API in the first place - has precious little
chance of detecting it.

Also include the correct header, because the fragile transitive
inclusion currently providing it is going to break soon.

Fixes: 20e7dce2 ("drm/tegra: Remove memory allocation from Falcon library")
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Mikko Perttunen <mperttunen@nvidia.com>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Tegra20 SoC supports only S/PDIF source for HDMI audio. Register ASoC HDMI
S/PDIF CODEC for Tegra20, it will be linked with the S/PDIF CPU DAI.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add missing error unwinding to tegra_hdmi_init(), for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The resume helper is called conditionally and causes a harmless warning
when stubbed out:

drivers/gpu/drm/tegra/nvdec.c:240:12: error: 'nvdec_runtime_resume' defined but not used [-Werror=unused-function]
  240 | static int nvdec_runtime_resume(struct device *dev)

Mark both suspend and resume as __maybe_unused for consistency to avoid
this warning.

Fixes: e76599df354d ("drm/tegra: Add NVDEC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Without CONFIG_IOMMU_API, the nvdec_writel() function is unused, causing
a warning:

drivers/gpu/drm/tegra/nvdec.c:48:13: error: 'nvdec_writel' defined but not used [-Werror=unused-function]
   48 | static void nvdec_writel(struct nvdec *nvdec, u32 value, unsigned int offset)
      |             ^~~~~~~~~~~~

As this is a trivial wrapper around an inline function, mark it as
inline itself, which avoids the warning as well.

Fixes: e76599df354d ("drm/tegra: Add NVDEC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Asus Transformer TF700T is a Tegra30 tablet device which uses RGB->DSI
bridge that requires a precise clock rate in order to operate properly.
Tegra30 has a dedicated PLL for each display controller, hence the PLL
rate can be changed freely. Allow PLL rate changes on Tegra30+ for RGB
output. Configure the clock rate before display controller is enabled
since DC itself may be running off this PLL and it's not okay to change
the rate of the active PLL that doesn't support dynamic frequency
switching since hardware will hang.

Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

struct tegra_dc is declared at 13rd line.
The declaration here is unnecessary. Remove it.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

When going idle, it's not unlikely that more work will follow.
As such, use autosuspend with a 500ms suspend delay.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

As of commit 4782c0a5 ("clk: tegra: Don't deassert reset on enabling
clocks"), module resets are no longer automatically deasserted when the
module clock is enabled. To make sure that the gr2d module continues to
work, we need to explicitly control the module reset.

Fixes: 4782c0a5 ("clk: tegra: Don't deassert reset on enabling clocks")
Signed-off-by: Thierry Reding <treding@nvidia.com>

Linking fails when dma-buf is disabled:

ld.lld: error: undefined symbol: dma_fence_release
>>> referenced by fence.c
>>>               gpu/host1x/fence.o:(host1x_syncpt_fence_enable_signaling) in archive drivers/built-in.a
>>> referenced by fence.c
>>>               gpu/host1x/fence.o:(host1x_fence_signal) in archive drivers/built-in.a
>>> referenced by fence.c
>>>               gpu/host1x/fence.o:(do_fence_timeout) in archive drivers/built-in.a

Fixes: 687db220 ("gpu: host1x: Add DMA fence implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Fix kernel-doc warning in host1x:

../drivers/gpu/host1x/bus.c:774: warning: Excess function parameter 'key' description in '__host1x_client_register'

Fixes: 0cfe5a6e ("gpu: host1x: Split up client initalization and registration")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Asus TF700T tablet uses TC358768 DPI->DSI bridge that sits between Tegra's
DPI output and display panel input. Bridge requires to have stable PCLK
output before RGB encoder is enabled because it uses PCLK by itself to
clock internal logic and bridge is programmed before Tegra's encoder is
enabled. Hence the PCLK clock shifter must be programmed when CRTC is
enabled, otherwise clock is unstable and bridge hangs because of it.
Move the shifter programming from RGB encoder into CRTC.

Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

To get full performance out of these engines, bump their clock rates
to maximum. In the future we may want something smarter but this
should be fine for now.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add support for booting and using NVDEC on Tegra210, Tegra186
and Tegra194 to the Host1x and TegraDRM drivers. Booting in
secure mode is not currently supported.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This adds support for asynchronously updating the cursor plane, which
enables support for the legacy cursor IOCTLs.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Currently this function doesn't return an error, but that may change in
the future, so make sure to propagate any error codes that it might
return.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Instead of referencing the tegra_plane_funcs struct directly, use each
plane's vtable instead. This makes it more future-proof in case any of
the planes ever use a different set of functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>

This cache is used to avoid mapping and unmapping buffer objects
unnecessarily. Mappings are cached per client and stay hot until
the buffer object is destroyed.
Signed-off-by: Thierry Reding <treding@nvidia.com>

DMA-BUF requires that each device that accesses a DMA-BUF attaches to it
separately. To do so the host1x_bo_pin() and host1x_bo_unpin() functions
need to be reimplemented so that they can return a mapping, which either
represents an attachment or a map of the driver's own GEM object.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge branch 'tegra-for-5.17-soc-opp' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into drm/tegra/for-next

Only couple drivers need to get the -ENODEV error code and majority of
drivers need to explicitly initialize the performance state. Add new
common helper which sets up OPP table for these drivers.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

GENPD core now can set up domain's performance state properly while device
is RPM-suspended. Runtime PM of a device must be enabled during setup
because GENPD checks whether device is suspended and check doesn't work
while RPM is disabled. Instead of replicating the boilerplate RPM-enable
code around OPP helper for each driver, let's make OPP helper to take care
of enabling it.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Pull x86 fixes from Thomas Gleixner:

 - Move the command line preparation and the early command line parsing
   earlier so that the command line parameters which affect
   early_reserve_memory(), e.g. efi=nosftreserve, are taken into
   account. This was broken when the invocation of
   early_reserve_memory() was moved recently.

 - Use an atomic type for the SGX page accounting, which is read and
   written locklessly, to plug various race conditions related to it.

* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Fix free page accounting
  x86/boot: Pull up cmdline preparation and early param parsing

Pull x86 perf fixes from Thomas Gleixner:

 - Remove unneded PEBS disabling when taking LBR snapshots to prevent an
   unchecked MSR access error.

 - Fix IIO event constraints for Snowridge and Skylake server chips.

* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/perf: Fix snapshot_branch_stack warning in VM
  perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
  perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
  perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server