- 31 Jan, 2019 2 commits
-
-
Kaike Wan authored
This patch adds the OPFN helper functions to initialize, encode, decode, and reset OPFN parameters for the TID RDMA feature. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Mitko Haralanov authored
OPFN (Omni Path Feature Negotiation) support discovery allows a RC QP to announce that it supports OPFN and also discover if OPFN is supported by the peer QP. OPFN parameter negotiation is skipped unless OPFN support is first discovered. OPFN support is announced by claiming what was the reserved bit in dword 1 of OmniPath modified base transport header in requests and responses. Reviewed-by:
-
- 30 Jan, 2019 4 commits
-
-
Michael J. Ruhl authored
Several locations for manipulating sges use an open coded sequence that is covered by helper functions. Use the appropriate helper functions. Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
Sge sizing is done in several places using an open coded method. This can cause maintenance issues. The open coded method is encapsulated in a helper routine. The helper was introduced with commit: 1198fcea ("IB/hfi1, rdmavt: Move SGE state helper routines into rdmavt") Update all call sites that have the open coded path with the helper routine. Reviewed-by:
-
Kamal Heib authored
The function ipoib_intercept_dev_id_attr() is only used in ipoib_main.c Fixes: f6350da4 ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace") Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Adit Ranadive authored
Update the driver to use the new device capability to report 64-bit UAR PFNs. Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
-
- 29 Jan, 2019 5 commits
-
-
Jason Gunthorpe authored
Yishai Hadas says: Enable DEVX asynchronous query commands This series enables querying a DEVX object in an asynchronous mode. The userspace application won't block when calling the firmware and it will be able to get the response back once that it will be ready. To enable the above functionality: - DEVX asynchronous command completion FD object was introduced. - The applicable file operations were implemented to enable using it by the user application. - Query asynchronous method was added to the DEVX object, it will call the firmware asynchronously and manages the response on the given input FD. - Hot unplug support was added for the FD to work properly upon unbind/disassociate. - mlx5 core fence for asynchronous commands was implemented and used to prevent racing upon unbind/disassociate. This branch is based on mlx5-next & v5.0-rc2 due to dependencies, from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux * branch 'devx-async': IB/mlx5: Implement DEVX hot unplug for async command FD IB/mlx5: Implement the file ops of DEVX async command FD IB/mlx5: Introduce async DEVX obj query API IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD Signed-off-by:
-
Yishai Hadas authored
Implement DEVX hot unplug for the async command FD. This is done by managing a list of the inflight commands and wait until all launched work is completed as part of devx_hot_unplug_async_cmd_event_file. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Implement the file ops of the DEVX async command FD, this enables using the FD for reading the events and manage other options on the FD. Signed-off-by:
-
Yishai Hadas authored
Introduce async DEVX obj query API to get the command response back to user space once it's ready without blocking when calling the firmware. The event's data includes a header with some meta data then the firmware output command data. The header includes: - The input 'wr_id' to let application recognizing the response. The input FD attribute is used to have the event data ready on. Downstream patches from this series will implement the file ops to let application read it. Signed-off-by:
-
Yishai Hadas authored
Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD and its initial implementation. This object is from type class FD and will be used to read DEVX async commands completion. The core layer should allow the driver to set object from type FD in a safe mode, this option was added with a matching comment in place. Signed-off-by:
-
- 25 Jan, 2019 2 commits
-
-
Masahiro Yamada authored
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by:
-
Masahiro Yamada authored
The included headers are located in include/target/. I was able to build these drivers without the extra header search paths. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
- 24 Jan, 2019 21 commits
-
-
Yuval Avnery authored
The open-coded variant missed destroy of SELinux created QP, reuse already existing ib_detroy_qp() call and use this opportunity to clean ib_create_qp() from double prints and unclear exit paths. Reported-by:
Parav Pandit <parav@mellanox.com> Fixes: d291f1a6 ("IB/core: Enforce PKey security on QPs") Signed-off-by:
Yuval Avnery <yuvalav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Ira Weiny authored
Similar to the core change commit 5f1d43de ("IB/core: disable memory registration of filesystem-dax vmas") PSM should be prevented from using filesystem DAX pages. Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Yangyang Li authored
This patch adds qpc timer and cqc timer allocation support for hardware timeout retransmission in kernel space driver. Signed-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
-
Yangyang Li authored
This patch adds SCC context clear support for DCQCN in kernel space driver. Signed-off-by:
-
Yangyang Li authored
This patch adds SCC context allocation and initialization support for DCQCN in kernel space driver. Signed-off-by:
-
Moni Shoua authored
When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set there is no caller to ib_alloc_odp_umem() so let's remove it. Signed-off-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Moni Shoua authored
A sub-range in ODP implicit MR should take its write permission from the MR and not be set always to allow. Fixes: d07d1d70 ("IB/umem: Update on demand page (ODP) support") Signed-off-by:
-
Jason Gunthorpe authored
There is no reason for this __GFP_NOFAIL, none of the other routines in this file use it, and there is an error unwind here. NOFAIL should be reserved for special cases, not used by network drivers. Fixes: 6a0b6174 ("rdma/cxgb4: Add support for kernel mode SRQ's") Reported-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that sparse complains about missing function declarations. Fixes: c9990ab3 ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm") Signed-off-by:
-
Bart Van Assche authored
This patch avoids that sparse complains about missing function declarations. Fixes: f27a0d50 ("RDMA/umem: Use umem->owning_mm inside ODP") Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
-
Greg Kroah-Hartman authored
The macro was just making things harder to follow, and audit, so remove it and call debugfs_create_file() directly. Also, the macro did not need to warn about the call failing as no one should ever care about any debugfs functions failing. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Parav Pandit authored
As the comment block of nonseekable_open() describes, nonseekable_open() can never fail. Several places in kernel depend on this behavior. Therefore, simplify the umad module to depend on this basic kernel functionality. Signed-off-by:
-
Michael Guralnik authored
Calling pci_enable_atomic_ops_to_root enables AtomicOp requests to pci root port. AtomicOp requests will be enabled only if the completer and all intermediate pci bridges support PCI atomic operations. This, together with appropriate settings in the NVCONFIG should enable PCI atomic operations on the device. PCI atomic operations were first introduced in PCI Express Base Specification 2.1. The Supported operations are Swap (Unconditional Swap), CAS (Compare and Swap) and FetchAdd (Fetch and Add). Unlike other atomic operation modes PCI atomic operations gives the user the option to do atomic operations on local memory, without involving verbs api, without it compromising the operation's atomicity. Signed-off-by:
Michael Guralnik <michaelgur@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
APIs that have deferred callbacks should have some kind of cleanup function that callers can use to fence the callbacks. Otherwise things like module unloading can lead to dangling function pointers, or worse. The IB MR code is the only place that calls this function and had a really poor attempt at creating this fence. Provide a good version in the core code as future patches will add more places that need this fence. Signed-off-by:
-
- 23 Jan, 2019 1 commit
-
-
Parav Pandit authored
ib_umad_init_port_dev() holds the reference of a ib_umad_device instance. ib_umad_device contains standard core device and cdev. cdev holds the reference of its parent core device. file ops holds the reference to cdev using core kernel. Therefore, there is no need to hold additional reference while opening umad related char devices. While at it, add comments to bring clarity on releasing references to ib_umd_device. Signed-off-by:
-
- 22 Jan, 2019 4 commits
-
-
Maor Gottlieb authored
Two flow specifications can set the ip protocol field in the flow table entry: 1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly. 2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users who want to receive specific L4 packets. We need to avoid overriding of the ip_protocol with zeros, in case that the user first put the L4 specification and only then the L3. Fixes: ca0d4753 ('IB/mlx5: Add support in TOS and protocol to flow steering') Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Add support for ODP for DEVX indirection mkey, it includes: - Recognizing its type as part of the radix tree lookup. - Use similar flow as done for the MW MKEY type. Signed-off-by:
-
Yishai Hadas authored
Manage indirection mkey upon DEVX flow to support ODP. To support a page fault event on the indirection mkey it needs to be part of the device mkey radix tree. Both the creation and the deletion flows for a DEVX object which is indirection mkey were adapted to handle that. Signed-off-by:
-
Yishai Hadas authored
Once an indirection MKEY is created umem valid bit shouldn't be set as this MKEY doesn't really hold a umem. Signed-off-by:
-
- 21 Jan, 2019 1 commit
-
-
Xiaofei Tan authored
AEQ overflow will be reported by hardware when too many asynchronous events occurred but not be handled in time. Normally, AEQ overflow error is not easy to occur. Once happened, we have to do physical function reset to recover. PF reset is implemented in two steps. Firstly, set reset level with ae_dev->ops->set_default_reset_request. Secondly, run reset with ae_dev->ops->reset_event. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
