- 11 Jul, 2016 1 commit
-
-
Tejun Heo authored
[ Upstream commit 4f996e23 ] Atomic allocations can trigger async map extensions which is serviced by chunk->map_extend_work. pcpu_balance_work which is responsible for destroying idle chunks wasn't synchronizing properly against chunk->map_extend_work and may end up freeing the chunk while the work item is still in flight. This patch fixes the bug by rolling async map extension operations into pcpu_balance_work. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: stable@vger.kernel.org # v3.18+ Fixes: 9c824b6a ("percpu: make sure chunk->map array has available space") Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 09 Jul, 2016 1 commit
-
-
Rainer Weikusat authored
[ Upstream commit c845acb3 ] On 2015/11/06, Dmitry Vyukov reported a deadlock involving the splice system call and AF_UNIX sockets, http://lists.openwall.net/netdev/2015/11/06/24 The situation was analyzed as (a while ago) A: socketpair() B: splice() from a pipe to /mnt/regular_file does sb_start_write() on /mnt C: try to freeze /mnt wait for B to finish with /mnt A: bind() try to bind our socket to /mnt/new_socket_name lock our socket, see it not bound yet decide that it needs to create something in /mnt try to do sb_start_write() on /mnt, block (it's waiting for C). D: splice() from the same pipe to our socket lock the pipe, see that socket is connected try to lock the socket, block waiting for A B: get around to actually feeding a chunk from pipe to file, try to lock the pipe. Deadlock. on 2015/11/10 by Al Viro, http://lists.openwall.net/netdev/2015/11/10/4 The patch fixes this by removing the kern_path_create related code from unix_mknod and executing it as part of unix_bind prior acquiring the readlock of the socket in question. This means that A (as used above) will sb_start_write on /mnt before it acquires the readlock, hence, it won't indirectly block B which first did a sb_start_write and then waited for a thread trying to acquire the readlock. Consequently, A being blocked by C waiting for B won't cause a deadlock anymore (effectively, both A and B acquire two locks in opposite order in the situation described above). Dmitry Vyukov(<dvyukov@google.com>) tested the original patch. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 23 Jun, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 18 Jun, 2016 13 commits
-
-
Andy Lutomirski authored
[ Upstream commit a44323e2 ] The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Jann Horn authored
[ Upstream commit 2f36db71 ] This prevents users from triggering a stack overflow through a recursive invocation of pagefault handling that involves mapping procfs files into virtual memory. Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Tyler Hicks <tyhicks@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Jann Horn authored
[ Upstream commit e54ad7f1 ] This prevents stacking filesystems (ecryptfs and overlayfs) from using procfs as lower filesystem. There is too much magic going on inside procfs, and there is no good reason to stack stuff on top of procfs. (For example, procfs does access checks in VFS open handlers, and ecryptfs by design calls open handlers from a kernel thread that doesn't drop privileges or so.) Signed-off-by: Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Prasun Maiti authored
[ Upstream commit 3d5fdff4 ] iwpriv app uses iw_point structure to send data to Kernel. The iw_point structure holds a pointer. For compatibility Kernel converts the pointer as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers may use iw_handler_def.private_args to populate iwpriv commands instead of iw_handler_def.private. For those case, the IOCTLs from SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl(). Accordingly when the filled up iw_point structure comes from 32 bit iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends it to driver. So, the driver may get the invalid data. The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory. This patch adds pointer conversion from 32 bit to 64 bit and vice versa, if the ioctl comes from 32 bit iwpriv to 64 bit Kernel. Cc: stable@vger.kernel.org Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com> Signed-off-by: Ujjal Roy <royujjal@gmail.com> Tested-by: Dibyajyoti Ghosh <dibyajyotig@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ben Dooks authored
[ Upstream commit b66b2a0a ] The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs() with what looks like the wrong parameter. The write_lock_regs function takes a pointer to the registers, not the bcm_kona_gpio structure. Fix the warning, and probably bug by changing the function to pass reg_base instead of kona_gpio, fixing the following warning: drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2>*reg_base got struct bcm_kona_gpio *kona_gpio warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2>*reg_base got struct bcm_kona_gpio *kona_gpio Cc: stable@vger.kernel.org Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ricardo Ribalda Delgado authored
[ Upstream commit 11f33a6d ] Under some circumstances, a gpiochip might be half cleaned from the gpio_device list. This patch makes sure that the chip pointer is still valid, before calling the match function. [ 104.088296] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 [ 104.089772] IP: [<ffffffff813d2045>] of_gpiochip_find_and_xlate+0x15/0x80 [ 104.128273] Call Trace: [ 104.129802] [<ffffffff813d2030>] ? of_parse_own_gpio+0x1f0/0x1f0 [ 104.131353] [<ffffffff813cd910>] gpiochip_find+0x60/0x90 [ 104.132868] [<ffffffff813d21ba>] of_get_named_gpiod_flags+0x9a/0x120 ... [ 104.141586] [<ffffffff8163d12b>] gpio_led_probe+0x11b/0x360 Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Al Viro authored
[ Upstream commit 3d56c25e ] Ascend-to-parent logics in d_walk() depends on all encountered child dentries not getting freed without an RCU delay. Unfortunately, in quite a few cases it is not true, with hard-to-hit oopsable race as the result. Fortunately, the fix is simiple; right now the rule is "if it ever been hashed, freeing must be delayed" and changing it to "if it ever had a parent, freeing must be delayed" closes that hole and covers all cases the old rule used to cover. Moreover, pipes and sockets remain _not_ covered, so we do not introduce RCU delay in the cases which are the reason for having that delay conditional in the first place. Cc: stable@vger.kernel.org # v3.2+ (and watch out for __d_materialise_dentry()) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Srinivas Pandruvada authored
[ Upstream commit 983e600e ] When turbo is disabled, the ->set_policy() interface is broken. For example, when turbo is disabled and cpuinfo.max = 2900000 (full max turbo frequency), setting the limits results in frequency less than the requested one: Set 1000000 KHz results in 0700000 KHz Set 1500000 KHz results in 1100000 KHz Set 2000000 KHz results in 1500000 KHz This is because the limits->max_perf fraction is calculated using the max turbo frequency as the reference, but when the max P-State is capped in intel_pstate_get_min_max(), the reference is not the max turbo P-State. This results in reducing max P-State. One option is to always use max turbo as reference for calculating limits. But this will not be correct. By definition the intel_pstate sysfs limits, shows percentage of available performance. So when BIOS has disabled turbo, the available performance is max non turbo. So the max_perf_pct should still show 100%. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw : Subject & changelog, rewrite in fewer lines of code ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Sasha Levin authored
[ Upstream commit b3c0a4da ] Because of an improper dereference, a stray 'C' character was output to the modalias when no 'compatible' was specified. This is the case for some old PowerMac drivers which only set the 'name' property. Fix it to let them match again. Reported-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Mathieu Malaterre <malat@debian.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Andreas Schwab <schwab@linux-m68k.org> Fixes: 6543becf ("mod/file2alias: make modalias generation safe for cross compiling") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Michael Ellerman authored
[ Upstream commit 2c2a63e3 ] The recent commit 7cc85103 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") added a new PVR mask & value to the start of the ibm_architecture_vec[] array. However it missed the fact that further down in the array, we hard code the offset of one of the fields, and then at boot use that value to patch the value in the array. This means every update to the array must also update the #define, ugh. This means that on pseries machines we will misreport to firmware the number of cores we support, by a factor of threads_per_core. Fix it for now by updating the #define. Fixes: 7cc85103 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
H. Peter Anvin authored
[ Upstream commit 9c77679c ] For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Linux Stable Tree <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Torsten Hilbrich authored
[ Upstream commit dab38e43 ] Tested with Lenovo Ultradock. Fixes the non-working headphone jack on the docking unit. Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric W. Biederman authored
[ Upstream commit d71ed6c9 ] MNT_LOCKED implies on a child mount implies the child is locked to the parent. So while looping through the children the children should be tested (not their parent). Typically an unshare of a mount namespace locks all mounts together making both the parent and the slave as locked but there are a few corner cases where other things work. Cc: stable@vger.kernel.org Fixes: ceeb0e5d ("vfs: Ignore unlocked mounts in fs_fully_visible") Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 17 Jun, 2016 24 commits
-
-
Eric W. Biederman authored
[ Upstream commit 97c1df3e ] Add this trivial missing error handling. Cc: stable@vger.kernel.org Fixes: 1b852bce ("mnt: Refactor the logic for mounting sysfs and proc in a user namespace") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Helge Deller authored
[ Upstream commit 8b78f260 ] One of the debian buildd servers had this crash in the syslog without any other information: Unaligned handler failed, ret = -2 clock_adjtime (pid 22578): Unaligned data reference (code 28) CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G E 4.5.0-2-parisc64-smp #1 Debian 4.5.4-1 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111100000001111 Tainted: G E r00-03 000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0 r04-07 00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff r08-11 0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4 r12-15 000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b r16-19 0000000000028800 0000000000000001 0000000000000070 00000001bde7c218 r20-23 0000000000000000 00000001bde7c210 0000000000000002 0000000000000000 r24-27 0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0 r28-31 0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218 sr00-03 0000000001200000 0000000001200000 0000000000000000 0000000001200000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88 IIR: 0ca0d089 ISR: 0000000001200000 IOR: 00000000fa6f7fff CPU: 1 CR30: 00000001bde7c000 CR31: ffffffffffffffff ORIG_R28: 00000002369fe628 IAOQ[0]: compat_get_timex+0x2dc/0x3c0 IAOQ[1]: compat_get_timex+0x2e0/0x3c0 RP(r2): compat_get_timex+0x40/0x3c0 Backtrace: [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0 [<0000000040205024>] syscall_exit+0x0/0x14 This means the userspace program clock_adjtime called the clock_adjtime() syscall and then crashed inside the compat_get_timex() function. Syscalls should never crash programs, but instead return EFAULT. The IIR register contains the executed instruction, which disassebles into "ldw 0(sr3,r5),r9". This load-word instruction is part of __get_user() which tried to read the word at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in. The unaligned handler is able to emulate all ldw instructions, but it fails if it fails to read the source e.g. because of page fault. The following program reproduces the problem: #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/mman.h> int main(void) { /* allocate 8k */ char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); /* free second half (upper 4k) and make it invalid. */ munmap(ptr+4096, 4096); /* syscall where first int is unaligned and clobbers into invalid memory region */ /* syscall should return EFAULT */ return syscall(__NR_clock_adjtime, 0, ptr+4095); } To fix this issue we simply need to check if the faulting instruction address is in the exception fixup table when the unaligned handler failed. If it is, call the fixup routine instead of crashing. While looking at the unaligned handler I found another issue as well: The target register should not be modified if the handler was unsuccessful. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Sergei Shtylyov authored
[ Upstream commit 39935466 ] The kernel-doc for the of_irq_get[_byname]() is clearly inadequate in describing the return values -- of_irq_get_byname() is documented better than of_irq_get() but it still doesn't mention that 0 is returned iff irq_create_of_mapping() fails (it doesn't return an error code in this case). Document all possible return value variants, making the writing of the word "IRQ" consistent, while at it... Fixes: 9ec36caf ("of/irq: do irq resolution in platform_get_irq") Fixes: ad69674e ("of/irq: do irq resolution in platform_get_irq_byname()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> CC: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Tony Luck authored
[ Upstream commit c7103f65 ] Broadwell made a small change to the rank target register moving the target rank ID field up from bits 16:19 to bits 20:23. Also found that the offset field grew by one bit in the IVY_BRIDGE to HASWELL transition, so fix the RIR_OFFSET() macro too. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org # v3.19+ Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.comSigned-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
AceLan Kao authored
[ Upstream commit f90d83b3 ] Add the pin configuration value of this machine into the pin_quirk table to make DELL1_MIC_NO_PRESENCE apply to this machine. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Chris Wilson authored
[ Upstream commit 0422e83d ] Recursive locking for ww_mutexes was originally conceived as an exception. However, it is heavily used by the DRM atomic modesetting code. Currently, the recursive deadlock is checked after we have queued up for a busy-spin and as we never release the lock, we spin until kicked, whereupon the deadlock is discovered and reported. A simple solution for the now common problem is to move the recursive deadlock discovery to the first action when taking the ww_mutex. Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1464293297-19777-1-git-send-email-chris@chris-wilson.co.ukSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Marc Zyngier authored
[ Upstream commit dd5f1b04 ] The INTID mask is wrong, and is made a signed value, which has nteresting effects in the KVM emulation. Let's sanitize it. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Paolo Bonzini authored
[ Upstream commit d14bdb55 ] MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to any of bits 63:32. However, this is not detected at KVM_SET_DEBUGREGS time, and the next KVM_RUN oopses: general protection fault: 0000 [#1] SMP CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 [...] Call Trace: [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm] [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm] [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480 [<ffffffff812418a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40 RSP <ffff88005836bd50> Testcase (beautified/reduced from syzkaller output): #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[8]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); memcpy(&dr, "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72" "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8" "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9" "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb", 48); r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr); r[6] = ioctl(r[4], KVM_RUN, 0); } Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Paolo Bonzini authored
[ Upstream commit c622a3c2 ] Found by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000120 IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm] PGD 6f80b067 PUD b6535067 PMD 0 Oops: 0000 [#1] SMP CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1 [...] Call Trace: [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm] [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm] [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm] [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480 [<ffffffff812418a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a1062>] tracesys_phase2+0x84/0x89 Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85 RIP [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm] RSP <ffff8800926cbca8> CR2: 0000000000000120 Testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[26]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); struct kvm_irqfd ifd; ifd.fd = syscall(SYS_eventfd2, 5, 0); ifd.gsi = 3; ifd.flags = 2; ifd.resamplefd = ifd.fd; r[25] = ioctl(r[3], KVM_IRQFD, &ifd); return 0; } Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Russell King authored
[ Upstream commit e2dfb4b8 ] PTRACE_SETVFPREGS fails to properly mark the VFP register set to be reloaded, because it undoes one of the effects of vfp_flush_hwstate(). Specifically vfp_flush_hwstate() sets thread->vfpstate.hard.cpu to an invalid CPU number, but vfp_set() overwrites this with the original CPU number, thereby rendering the hardware state as apparently "valid", even though the software state is more recent. Fix this by reverting the previous change. Cc: <stable@vger.kernel.org> Fixes: 8130b9d7 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers") Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Simon Marchi <simon.marchi@ericsson.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ben Skeggs authored
[ Upstream commit f045f459 ] Reported by KASAN. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ben Skeggs authored
[ Upstream commit 383d0a41 ] Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ilia Mirkin authored
[ Upstream commit 3988f645 ] NVIDIA provided the documentation for mp error 0x10, INVALID_ADDR_SPACE, which apparently happens when trying to use an atomic operation on local or shared memory (instead of global memory). Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Lukasz Luba authored
[ Upstream commit f840ab18 ] The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Cc: <stable@vger.kernel.org> # 3.19+ Fixes: f6859014 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Acked-by: Javi Merino <javi.merino@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Viresh Kumar authored
[ Upstream commit 59f0d218 ] That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Thomas Huth authored
[ Upstream commit 7cc85103 ] If we do not provide the PVR for POWER8NVL, a guest on this system currently ends up in PowerISA 2.06 compatibility mode on KVM, since QEMU does not provide a generic PowerISA 2.07 mode yet. So some new instructions from POWER8 (like "mtvsrd") get disabled for the guest, resulting in crashes when using code compiled explicitly for POWER8 (e.g. with the "-mcpu=power8" option of GCC). Fixes: ddee09c0 ("powerpc: Add PVR for POWER8NVL processor") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ewan D. Milne authored
[ Upstream commit fbd83006 ] Linux fails to boot as a guest with a QEMU CD-ROM: [ 4.439488] ata2.00: ATAPI: QEMU CD-ROM, 0.8.2, max UDMA/100 [ 4.443649] ata2.00: configured for MWDMA2 [ 4.450267] scsi 1:0:0:0: CD-ROM QEMU QEMU CD-ROM 0.8. PQ: 0 ANSI: 5 [ 4.464317] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.464319] ata2.00: BMDMA stat 0x5 [ 4.464339] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.464339] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.464341] ata2.00: status: { DRDY DRQ } [ 4.465864] ata2: soft resetting link [ 4.625971] ata2.00: configured for MWDMA2 [ 4.628290] ata2: EH complete [ 4.646670] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 4.646671] ata2.00: BMDMA stat 0x5 [ 4.646683] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 4.646683] Inquiry 12 01 00 00 ff 00res 48/20:02:00:24:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation) [ 4.646685] ata2.00: status: { DRDY DRQ } [ 4.648193] ata2: soft resetting link ... Fix this by suppressing VPD inquiry for this device. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Bob Copeland authored
[ Upstream commit fe7a7c57 ] Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Cc: stable@vger.kernel.org Reported-by: Fred Veldini <fred.veldini@gmail.com> Tested-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Martin Willi authored
[ Upstream commit 62397da5 ] A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Cc: stable@vger.kernel.org Fixes: 7882513b ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Thomas Huth authored
[ Upstream commit 8dd75ccb ] We are already using the privileged versions of MMCR0, MMCR1 and MMCRA in the kernel, so for MMCR2, we should better use the privileged versions, too, to be consistent. Fixes: 240686c1 ("powerpc: Initialise PMU related regs on Power8") Cc: stable@vger.kernel.org # v3.10+ Suggested-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Thomas Huth authored
[ Upstream commit d23fac2b ] The SIAR and SDAR registers are available twice, one time as SPRs 780 / 781 (unprivileged, but read-only), and one time as the SPRs 796 / 797 (privileged, but read and write). The Linux kernel code currently uses the unprivileged SPRs - while this is OK for reading, writing to that register of course does not work. Since the KVM code tries to write to this register, too (see the mtspr in book3s_hv_rmhandlers.S), the contents of this register sometimes get lost for the guests, e.g. during migration of a VM. To fix this issue, simply switch to the privileged SPR numbers instead. Cc: stable@vger.kernel.org Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
hongkun.cao authored
[ Upstream commit 5edf673d ] When a dual-edge irq is triggered, an incorrect irq will be reported on condition that the external signal is not stable and this incorrect irq has been registered. Correct the register offset. Cc: stable@vger.kernel.org Signed-off-by: Hongkun Cao <hongkun.cao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Kailang Yang authored
[ Upstream commit e69e7e03 ] That is some different register for ALC255 and ALC256. ALC256 can't fit with some ALC255 register. This issue is cause from LDO output voltage control. This patch is updated the right LDO register value. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Russell Currey authored
[ Upstream commit 871e178e ] In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the spec states that values of 9900-9905 can be returned, indicating that software should delay for 10^x (where x is the last digit, i.e. 990x) milliseconds and attempt the call again. Currently, the kernel doesn't know about this, and respecting it fixes some PCI failures when the hypervisor is busy. The delay is capped at 0.2 seconds. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-