The Makefile contains the variables needed for the driver to build.
The Makefile.inc isn't needed.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As result of patches
staging: vt6656: rxtx.c: s_uGetDataDuration remove First Frag or Mid Frag dead code
staging: vt6656: rxtx.c: s_uGetDataDuration remove dead variables.

variables uFragIdx, cbLastFragmentSize, uMACfragNum are dead.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As result of patch
staging: vt6656: rxtx.c s_uGetDataDuration remove First Frag or Mid Frag dead code.

cbFrameLength, wRate, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption are
dead variables.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver always calls s_uGetDataDuration with;
uFragIdx = 0, cbLastFragmentSize = 0 and uMACfragNum = 1

uFragIdx == (uMACfragNum-1) is always true and bLastFrag = 1.

Remove dead First Frag or Mid Frag if/else and variables.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[1] introduced down_write in zram_slot_free_notify to prevent race
between zram_slot_free_notify and zram_bvec_[read|write]. The race
could happen if somebody who has right permission to open swap device
is reading swap device while it is used by swap in parallel.

However, zram_slot_free_notify is called with holding spin_lock of
swap layer so we shouldn't avoid holing mutex. Otherwise, lockdep
warns it.

This patch adds new list to handle free slot and workqueue
so zram_slot_free_notify just registers slot index to be freed and
registers the request to workqueue. If workqueue is expired,
it holds mutex_lock so there is no problem any more.

If any I/O is issued, zram handles pending slot-free request
caused by zram_slot_free_notify right before handling issued
request because workqueue wouldn't be expired yet so zram I/O
request handling function can miss it.

Lastly, when zram is reset, flush_work could handle all of pending
free request so we shouldn't have memory leak.

NOTE: If zram_slot_free_notify's kmalloc with GFP_ATOMIC would be
failed, the slot will be freed when next write I/O write the slot.

[1] [57ab0485, zram: use zram->lock to protect zram_free_page()
    in swap free notify path]

* from v2
  * refactoring

* from v1
  * totally redesign

Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[1] tried to fix invalid memory access on zram->disk but it didn't
fix properly because get_disk failed during module exit path.

Actually, we don't need to reset zram->disk's capacity to zero
in module exit path so that this patch introduces new argument
"reset_capacity" on zram_reset_divice and it only reset it when
reset_store is called.

[1] 6030ea9b,  zram: avoid invalid memory access in zram_exit()

Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reorder the kernel doc comments for 'struct dwc2_core_params' to
match the ordering in the struct itself. Reorder the members of
'struct dwc2_qh' (and its kerneldoc comments) to minimize the
amount of structure padding.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a coding style issue of 80 character per line.
Signed-off-by: Andreas Werner <wernerandy@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the unneeded SBE_INCLUDE_SYMBOLS #define, and the associated STATIC
#define, and replaced all occurances of STATIC with 'static'.  This was in
response to sparse warnings of the form "symbol 'XYZ' was not declared. Should
it be static?".

Removed a function prototype (musycc_init_port) as adding the 'static'
declaration produced a new gcc warning. (musycc_init_port is only declared if
SBE_WAN256T3_ENABLE is set)
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed by removing trailing whitespace
Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking the return of dev_alloc_skb as stated in the following bug:
https://bugzilla.kernel.org/show_bug.cgi?id=60401

Reported-by: RUC_Soft_Sec rucsoftsec@gmail.com
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the drivers with simple, per channel programmable i/o, to use the
comedi_dio_insn_config() helper function.

All of these pass a 'mask' of '0' to comedi_dio_insn_config() this causes
the per channel mask to be used to configure the i/o direction.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this driver to use the comedi_dio_insn_config() helper function.

Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the DIO channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a DIO channel.

Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same paramters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped DIO channels.

This function returns:

  0 if the instruction was successful but requires additional handling by
  the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}

  insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)

  -EINVAL for all unhandled instructions

The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 42ef678b.

It's incorrect as well... time for more coffee...

Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 4f76463d.

I applied an incorrect version here as well :(

Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.

All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To get the name of a file from a pathname we may use kbasename() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit f21c5394.

I applied the wrong patch :(

Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache is obsolete and not used anymore, Bob Liu has rewritten it and is
submitting it for inclusion through the main -mm tree, as it should have
been done in the first place...

Cc: Bob Liu <lliubbo@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.

All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this driver to use the comedi_dio_insn_config() helper function.

Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the dio channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a dio channel.

Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same parameters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped dio channels.

This function returns:

  0 if the instruction was successful but requires additional handling by
  the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}

  insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)

  -EINVAL for all unhandled instructions

The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace structures with struct ieee80211_cts data

typedef struct tagSCTSData include extra packing wReserved
not in struct ieee80211_cts

This is corrected by adding reserved2 to the structures.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace structures with struct ieee80211_rts data.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memset to 0 structure _USB_SEND_CONTEXT pContext->Data to its
size of MAX_TOTAL_SIZE_WITH_ALL_HEADERS as defined
in device.h

This removes the need for memset in the TX path.

It also allows the removal of dead structure
TX_BUFFER_CONTAINER BufferHeader;
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a bug where we were not returning correct hub status
for 8th port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure that we reset port configuration no. when PD departs.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Deleted an extern function that wasn't used in this driver.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed some coding style issues.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed some coding style issues
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Prototype of a function added to the header to avoid the use of extern.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

White space deleted before a semicolon.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed issue by removing Space before semicolon
Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Andres Salomon and Chris Ball are not longer at OLPC.
Daniel Drake is the new OLPC go-to guy. And I wanna
also be CC'd on DCON and other OLPC patches.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes kernel crash issue, when we receive URB request
after de-enumerating device.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix following issues reported by Dan:-

1) There is no check limiting the size to 32 and it could be up to
   253 bytes.
2) Use defines instead of magic numbers.
3) The oz_farewell struct is supposed to be a variable length struct
   but the variable part is put in the middle.  It doesn't make any
   sense to put the length of the variable size array after then end
   of the array because we can never find it again!  Put the
   variable size array at the end.  Make it a zero length array.
   u8 len;
   u8 report[0];
4) In oz_add_farewell() we do this:

	f = kmalloc(sizeof(struct oz_farewell) + len - 1, GFP_ATOMIC);

    The "- 1" refers to sizeof(f->report) but because it was a magic
    number then it was missed when the sizeof(f->report) changed.
5) In [patch 6/6] we set the ->len member.  But because it is at the
   end of a variable length array with no limit check the remote
   attacker can just rewrite it using the memcpy() on the next line.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes following build warning.

drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30aadd): undefined reference to `__divdi3'
   drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30ac85): undefined reference to `__divdi3'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>