- 05 Oct, 2014 31 commits
-
-
Y.C. Chen authored
commit 83502a5d upstream. Type error and cause AST2000 cannot be detected correctly Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Egbert Eich <eich@suse.de> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit 7a98948f upstream. The vblank waits in intel_tv_detect_type() are timing out for some reason. This is a regression caused removing seemingly useless vblank waits from the modeset seqeuence in: commit 56ef52ca Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu May 8 19:23:15 2014 +0300 drm/i915: Kill vblank waits after pipe enable on gmch platforms So it turns out they weren't all entirely useless. Apparently the pipe has to go through one full frame before we enable the TV port. Add a vblank wait to intel_enable_tv() to make sure that happens. Another approach was attempted by placing the vblank wait just after enabling the port. The theory behind that attempt was that we need to let the port stay enabled for one full frame before disabling it again during load detection. But that didn't work, and we definitely must have the vblank wait before enabling the port. Cc: Alan Bartlett <ajb@elrepo.org> Tested-by:
Alan Bartlett <ajb@elrepo.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79311Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Mathias Krause authored
commit bbe1c274 upstream. The __init annotations for the DMI callback functions are wrong as this code can be called even after the module has been initialized, e.g. like this: # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove # modprobe i915 # echo 1 > /sys/bus/pci/rescan The first command will remove the PCI device from the kernel's device list so the second command won't see it right away. But as it registers a PCI driver it'll see it on the third command. If the system happens to match one of the DMI table entries we'll try to call a function in long released memory and generate an Oops, at best. Fix this by removing the bogus annotation. Modpost should have caught that one but it ignores section reference mismatches from the .rodata section. :/ Fixes: 25e341cf ("drm/i915: quirk away broken OpRegion VBT") Fixes: 8ca4013d ("CHROMIUM: i915: Add DMI override to skip CRT...") Fixes: 425d244c ("drm/i915: ignore LVDS on intel graphics systems...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jarod Wilson <jarod@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed? Signed-off-by:
-
Benjamin Tissoires authored
commit 5abfe85c upstream. Commit "HID: logitech: perform bounds checking on device_id early enough" unfortunately leaks some errors to dmesg which are not real ones: - if the report is not a DJ one, then there is not point in checking the device_id - the receiver (index 0) can also receive some notifications which can be safely ignored given the current implementation Move out the test regarding the report_id and also discards printing errors when the receiver got notified. Fixes: ad3e14d7Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit c54def7b upstream. The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Reported-by:
Steven Vittitoe <scvitti@google.com> Signed-off-by:
-
Jiri Kosina authored
commit 844817e4 upstream. The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Reported-by:
-
Toshiaki Makita authored
commit e15693ef upstream. cfq_group_service_tree_add() is applying new_weight at the beginning of the function via cfq_update_group_weight(). This actually allows weight to change between adding it to and subtracting it from children_weight, and triggers WARN_ON_ONCE() in cfq_group_service_tree_del(), or even causes oops by divide error during vfr calculation in cfq_group_service_tree_add(). The detailed scenario is as follows: 1. Create blkio cgroups X and Y as a child of X. Set X's weight to 500 and perform some I/O to apply new_weight. This X's I/O completes before starting Y's I/O. 2. Y starts I/O and cfq_group_service_tree_add() is called with Y. 3. cfq_group_service_tree_add() walks up the tree during children_weight calculation and adds parent X's weight (500) to children_weight of root. children_weight becomes 500. 4. Set X's weight to 1000. 5. X starts I/O and cfq_group_service_tree_add() is called with X. 6. cfq_group_service_tree_add() applies its new_weight (1000). 7. I/O of Y completes and cfq_group_service_tree_del() is called with Y. 8. I/O of X completes and cfq_group_service_tree_del() is called with X. 9. cfq_group_service_tree_del() subtracts X's weight (1000) from children_weight of root. children_weight becomes -500. This triggers WARN_ON_ONCE(). 10. Set X's weight to 500. 11. X starts I/O and cfq_group_service_tree_add() is called with X. 12. cfq_group_service_tree_add() applies its new_weight (500) and adds it to children_weight of root. children_weight becomes 0. Calcularion of vfr triggers oops by divide error. weight should be updated right before adding it to children_weight. Reported-by:
Ruki Sekiya <sekiya.ruki@lab.ntt.co.jp> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Clemens Ladisch authored
commit a9960e6a upstream. The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 7a9744cb upstream. When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by:
Adam Richter <adam_richter2004@yahoo.com> Signed-off-by:
-
Takashi Iwai authored
commit acf08081 upstream. ALC1150 codec seems to need the COEF- and PLL-setups just like its compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show the problem like too low output volumes unless the COEF setup is applied. Reported-and-tested-by:
Dana Goyette <danagoyette@gmail.com> Signed-off-by:
-
Clemens Ladisch authored
commit ddc64b27 upstream. snd_info_get_line() documents that its last parameter must be one less than the buffer size, but this API design guarantees that (literally) every caller gets it wrong. Just change this parameter to have its obvious meaning. Reported-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Will Deacon authored
commit 27d7ff27 upstream. I'm not sure what I was on when I wrote this, but when iterating over the hardware watchpoint array (hbp_watch_array), our index is off by ARM_MAX_BRP, so we walk off the end of our thread_struct... ... except, a dodgy condition in the loop means that it never executes at all (bp cannot be NULL). This patch fixes the code so that we remove the bp check and use the correct index for accessing the watchpoint structures. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Josef Bacik authored
commit 4ce97dbf upstream. Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is empty when we set waiters_pending but an event shows up exactly at that moment we can miss being woken up by the ring buffers irq work. Since ring_buffer_empty() is inherently racey we will sometimes think that the buffer is not empty. So we don't get woken up and we don't think there are any events even though there were some ready when we added the watch, which makes us hang. This patch fixes this by making sure that we are actually on the wait list before we set waiters_pending, and add a memory barrier to make sure ring_buffer_empty() is going to be correct. Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Simon Lindgren authored
commit 6721f28a upstream. There is a race condition in at91_do_twi_xfer when signals arrive. If a signal is recieved while waiting for a transfer to complete wait_for_completion_interruptible_timeout() will return -ERESTARTSYS. This is not handled correctly resulting in interrupts still being enabled and a transfer being in flight when we return. Symptoms include a range of oopses and bus lockups. Oopses can happen when the transfer completes because the interrupt handler will corrupt the stack. If a new transfer is started before the interrupt fires the controller will start a new transfer in the middle of the old one, resulting in confused slaves and a locked bus. To avoid this, use wait_for_completion_io_timeout instead so that we don't have to deal with gracefully shutting down the transfer and disabling the interrupts. Signed-off-by:
Simon Lindgren <simon@aqwary.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Marek Roszko authored
commit 75b81f33 upstream. The driver was not bound checking the received length byte to ensure it was within the the buffer size that is allocated for SMBus blocks. This resulted in buffer overflows whenever an invalid length byte was received. It also failed to ensure the length byte was not zero. If it received zero, it would end up in an infinite loop as the at91_twi_read_next_byte function returned immediately without allowing RHR to be read to clear the RXRDY interrupt. Tested agaisnt a SMBus compliant battery. Signed-off-by:
Marek Roszko <mark.roszko@gmail.com> Acked-by:
-
Will Deacon authored
commit eb35bdd7 upstream. Nathan reports that we leak TLS information from the parent context during an exec, as we don't clear the TLS registers when flushing the thread state. This patch updates the flushing code so that we: (1) Unconditionally zero the tpidr_el0 register (since this is fully context switched for native tasks and zeroed for compat tasks) (2) Zero the tp_value state in thread_info before clearing the tpidrr0_el0 register for compat tasks (since this is only writable by the set_tls compat syscall and therefore not fully switched). A missing compiler barrier is also added to the compat set_tls syscall. Acked-by:
Nathan Lynch <Nathan_Lynch@mentor.com> Reported-by:
-
Anton Blanchard authored
commit cbd52281 upstream. Hidden away in the last 8 bytes of the buffer_list page is a solitary statistic. It needs to be byte swapped or else ethtool -S will produce numbers that terrify the user. Since we do this in multiple places, create a helper function with a comment explaining what is going on. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Murali Karicheri authored
commit c5edfff9 upstream. Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
James Ralston authored
commit 1b071a09 upstream. This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Arjun Sreedharan authored
commit 4dc7c76c upstream. scc_bus_softreset not necessarily should return zero. Propagate the error code. Signed-off-by:
Arjun Sreedharan <arjun024@gmail.com> Signed-off-by:
-
Jiri Kosina authored
commit ece4a17d upstream. Withtout this, ring initialization fails reliabily during resume with [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head ffffff8804 tail 00000000 start 000e4000 This is not a complete fix, but it is verified to make the ring initialization failures during resume much less likely. We were not able to root-cause this bug (likely HW-specific to Gen4 chips) yet. This is therefore used as a ducttape before problem is fully understood and proper fix created, so that people don't suffer from completely unusable systems in the meantime. The discussion and debugging is happening at https://bugs.freedesktop.org/show_bug.cgi?id=76554Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit 5dc35532 upstream. Looks like the lm63 driver supports the lm64 as well. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Tetsuo Handa authored
commit 46c2df68 upstream. We can use "unsigned int" instead of "atomic_t" by updating start_pool variable under _manager->lock. This patch will make it possible to avoid skipping when choosing a pool to shrink in round-robin style, after next patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork). Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Tetsuo Handa authored
commit 11e504cc upstream. list_empty(&_manager->pools) being false before taking _manager->lock does not guarantee that _manager->npools != 0 after taking _manager->lock because _manager->npools is updated under _manager->lock. Signed-off-by:
-
Guido Martínez authored
commit c9a3ad25 upstream. display_timings_release calls kfree on the display_timings object passed to it. Calling kfree after it is wrong. SLUB debug showed the following warning: ============================================================================= BUG kmalloc-64 (Tainted: G W ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in of_get_display_timings+0x2c/0x214 age=601 cpu=0 pid=884 __slab_alloc.constprop.79+0x2e0/0x33c kmem_cache_alloc+0xac/0xdc of_get_display_timings+0x2c/0x214 panel_probe+0x7c/0x314 [tilcdc] platform_drv_probe+0x18/0x48 [..snip..] INFO: Freed in panel_destroy+0x18/0x3c [tilcdc] age=0 cpu=0 pid=907 __slab_free+0x34/0x330 panel_destroy+0x18/0x3c [tilcdc] tilcdc_unload+0xd0/0x118 [tilcdc] drm_dev_unregister+0x24/0x98 [..snip..] Signed-off-by:
Guido Martínez <guido@vanguardiasur.com.ar> Tested-by:
Darren Etheridge <detheridge@ti.com> Signed-off-by:
-
Guido Martínez authored
commit eb565a2b upstream. Unregister resources in the correct order on tilcdc_drm_fini, which is the reverse order they were registered during tilcdc_drm_init. This also means unregistering the driver before releasing its resources. Signed-off-by:
-
Guido Martínez authored
commit 3a490122 upstream. The driver did not unregister the allocated framebuffer, which caused memory leaks (and memory manager WARNs) when unloading. Also, the framebuffer device under /dev still existed after unloading. Add a call to drm_fbdev_cma_fini when unloading the module to prevent both issues. Signed-off-by:
-
Guido Martínez authored
commit 16dcbdef upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver, otherwise we will get a warning about a duplicate filename in sysfs. Signed-off-by:
-
Guido Martínez authored
commit daa15b4c upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: tda998x 0-0070: found TDA19988 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 825 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-HDMI-A-1' Modules linked in: [..] CPU: 0 PID: 825 Comm: modprobe Not tainted 3.15.0-rc4-00027-g9dcdef4 #82 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1b40>] (slave_modeset_init+0x120/0x1bc [tilcdc]) [<bf0b1b40>] (slave_modeset_init [tilcdc]) from [<bf0b2be8>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2be8>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [..snip..] ---[ end trace 4df8d614936ebdee ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by:
-
Guido Martínez authored
commit e396900e upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 824 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-LVDS-1' Modules linked in: [...] CPU: 0 PID: 824 Comm: modprobe Not tainted 3.15.0-rc4-00027-g6484f96-dirty #81 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1fec>] (panel_modeset_init+0xb8/0x134 [tilcdc]) [<bf0b1fec>] (panel_modeset_init [tilcdc]) from [<bf0b2bf0>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2bf0>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [ .. snip .. ] ---[ end trace b2d09cd9578b0497 ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by:
-
Ronald Wahl authored
commit 671796dd upstream. The driver assumes that endpoint 4 is always an interrupt endpoint. Unfortunately the type differs between high-speed and full-speed configurations while in the former case it is indeed an interrupt endpoint this is not true for the latter case - here it is a bulk endpoint. When sending URBs with the wrong type the kernel will generate a warning message including backtrace. In this specific case there will be a huge amount of warnings which can bring the system to freeze. To fix this we are now sending URBs to endpoint 4 using the type found in the endpoint descriptor. A side note: The carl9170 firmware currently specifies endpoint 4 as interrupt endpoint even in the full-speed configuration but this has no relevance because before this firmware is loaded the endpoint type is as described above and after the firmware is running the stick is not reenumerated and so the old descriptor is used. Signed-off-by:
Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
- 17 Sep, 2014 9 commits
-
-
Greg Kroah-Hartman authored
-
Sage Weil authored
commit 73c3d481 upstream. We preallocate a few of the message types we get back from the mon. If we get a larger message than we are expecting, fall back to trying to allocate a new one instead of blindly using the one we have. Signed-off-by:
Sage Weil <sage@redhat.com> Reviewed-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Ilya Dryomov authored
commit 3cea4c30 upstream. Rename front_max field of struct ceph_msg to front_alloc_len to make its purpose more clear. Signed-off-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 8e54caf4 upstream. Some Atmel TPMs provide completely wrong timeouts from their TPM_CAP_PROP_TIS_TIMEOUT query. This patch detects that and returns new correct values via a DID/VID table in the TIS driver. Tested on ARM using an AT97SC3204T FW version 37.16 [PHuewe: without this fix these 'broken' Atmel TPMs won't function on older kernels] Signed-off-by:
"Berg, Christopher" <Christopher.Berg@atmel.com> Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> [bwh: Backported to 3.10: - Adjust filename, context - s/chip->ops->/chip->vendor./] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Linus Torvalds authored
commit 99d263d4 upstream. Josef Bacik found a performance regression between 3.2 and 3.10 and narrowed it down to commit bfcfaa77 ("vfs: use 'unsigned long' accesses for dcache name comparison and hashing"). He reports: "The test case is essentially for (i = 0; i < 1000000; i++) mkdir("a$i"); On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k dir/sec with 3.10. This is because we spend waaaaay more time in __d_lookup on 3.10 than in 3.2. The new hashing function for strings is suboptimal for < sizeof(unsigned long) string names (and hell even > sizeof(unsigned long) string names that I've tested). I broke out the old hashing function and the new one into a userspace helper to get real numbers and this is what I'm getting: Old hash table had 1000000 entries, 0 dupes, 0 max dupes New hash table had 12628 entries, 987372 dupes, 900 max dupes We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash My test does the hash, and then does the d_hash into a integer pointer array the same size as the dentry hash table on my system, and then just increments the value at the address we got to see how many entries we overlap with. As you can see the old hash function ended up with all 1 million entries in their own bucket, whereas the new one they are only distributed among ~12.5k buckets, which is why we're using so much more CPU in __d_lookup". The reason for this hash regression is two-fold: - On 64-bit architectures the down-mixing of the original 64-bit word-at-a-time hash into the final 32-bit hash value is very simplistic and suboptimal, and just adds the two 32-bit parts together. In particular, because there is no bit shuffling and the mixing boundary is also a byte boundary, similar character patterns in the low and high word easily end up just canceling each other out. - the old byte-at-a-time hash mixed each byte into the final hash as it hashed the path component name, resulting in the low bits of the hash generally being a good source of hash data. That is not true for the word-at-a-time case, and the hash data is distributed among all the bits. The fix is the same in both cases: do a better job of mixing the bits up and using as much of the hash data as possible. We already have the "hash_32|64()" functions to do that. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 482db906 upstream. D_HASH{MASK,BITS} are used once each, both in the same function (d_hash()). At this point they are actively misguiding - they imply that values are compiler constants, which is no longer true. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Bart Van Assche authored
commit bcc05910 upstream. If scsi_remove_host() is invoked after a SCSI device has been blocked, if the fast_io_fail_tmo or dev_loss_tmo work gets scheduled on the workqueue executing srp_remove_work() and if an I/O request is scheduled after the SCSI device had been blocked by e.g. multipathd then the following deadlock can occur: kworker/6:1 D ffff880831f3c460 0 195 2 0x00000000 Call Trace: [<ffffffff814aafd9>] schedule+0x29/0x70 [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0 [<ffffffff8105af6f>] msleep+0x2f/0x40 [<ffffffff8123b0ae>] __blk_drain_queue+0x4e/0x180 [<ffffffff8123d2d5>] blk_cleanup_queue+0x225/0x230 [<ffffffffa0010732>] __scsi_remove_device+0x62/0xe0 [scsi_mod] [<ffffffffa000ed2f>] scsi_forget_host+0x6f/0x80 [scsi_mod] [<ffffffffa0002eba>] scsi_remove_host+0x7a/0x130 [scsi_mod] [<ffffffffa07cf5c5>] srp_remove_work+0x95/0x180 [ib_srp] [<ffffffff8106d7aa>] process_one_work+0x1ea/0x6c0 [<ffffffff8106dd9b>] worker_thread+0x11b/0x3a0 [<ffffffff810758bd>] kthread+0xed/0x110 [<ffffffff814b972c>] ret_from_fork+0x7c/0xb0 multipathd D ffff880096acc460 0 5340 1 0x00000000 Call Trace: [<ffffffff814aafd9>] schedule+0x29/0x70 [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0 [<ffffffff814ab79b>] io_schedule_timeout+0x9b/0xf0 [<ffffffff814abe1c>] wait_for_completion_io_timeout+0xdc/0x110 [<ffffffff81244b9b>] blk_execute_rq+0x9b/0x100 [<ffffffff8124f665>] sg_io+0x1a5/0x450 [<ffffffff8124fd21>] scsi_cmd_ioctl+0x2a1/0x430 [<ffffffff8124fef2>] scsi_cmd_blk_ioctl+0x42/0x50 [<ffffffffa00ec97e>] sd_ioctl+0xbe/0x140 [sd_mod] [<ffffffff8124bd04>] blkdev_ioctl+0x234/0x840 [<ffffffff811cb491>] block_ioctl+0x41/0x50 [<ffffffff811a0df0>] do_vfs_ioctl+0x300/0x520 [<ffffffff811a1051>] SyS_ioctl+0x41/0x80 [<ffffffff814b9962>] tracesys+0xd0/0xd5 Fix this by scheduling removal work on another workqueue than the transport layer timers. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
David Dillow <dave@thedillows.org> Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Tejun Heo authored
commit 2a1b4cf2 upstream. While a queue is being destroyed, all the blkgs are destroyed and its ->root_blkg pointer is set to NULL. If someone else starts to drain while the queue is in this state, the following oops happens. NULL pointer dereference at 0000000000000028 IP: [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230 PGD e4a1067 PUD b773067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: cfq_iosched(-) [last unloaded: cfq_iosched] CPU: 1 PID: 537 Comm: bash Not tainted 3.16.0-rc3-work+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88000e222250 ti: ffff88000efd4000 task.ti: ffff88000efd4000 RIP: 0010:[<ffffffff8144e944>] [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230 RSP: 0018:ffff88000efd7bf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff880015091450 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88000efd7c10 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88000e222250 R11: 0000000000000000 R12: ffff880015091450 R13: ffff880015092e00 R14: ffff880015091d70 R15: ffff88001508fc28 FS: 00007f1332650740(0000) GS:ffff88001fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000028 CR3: 0000000009446000 CR4: 00000000000006e0 Stack: ffffffff8144e8f6 ffff880015091450 0000000000000000 ffff880015091d80 ffff88000efd7c28 ffffffff8144ae2f ffff880015091450 ffff88000efd7c58 ffffffff81427641 ffff880015091450 ffffffff82401f00 ffff880015091450 Call Trace: [<ffffffff8144ae2f>] blkcg_drain_queue+0x1f/0x60 [<ffffffff81427641>] __blk_drain_queue+0x71/0x180 [<ffffffff81429b3e>] blk_queue_bypass_start+0x6e/0xb0 [<ffffffff814498b8>] blkcg_deactivate_policy+0x38/0x120 [<ffffffff8144ec44>] blk_throtl_exit+0x34/0x50 [<ffffffff8144aea5>] blkcg_exit_queue+0x35/0x40 [<ffffffff8142d476>] blk_release_queue+0x26/0xd0 [<ffffffff81454968>] kobject_cleanup+0x38/0x70 [<ffffffff81454848>] kobject_put+0x28/0x60 [<ffffffff81427505>] blk_put_queue+0x15/0x20 [<ffffffff817d07bb>] scsi_device_dev_release_usercontext+0x16b/0x1c0 [<ffffffff810bc339>] execute_in_process_context+0x89/0xa0 [<ffffffff817d064c>] scsi_device_dev_release+0x1c/0x20 [<ffffffff817930e2>] device_release+0x32/0xa0 [<ffffffff81454968>] kobject_cleanup+0x38/0x70 [<ffffffff81454848>] kobject_put+0x28/0x60 [<ffffffff817934d7>] put_device+0x17/0x20 [<ffffffff817d11b9>] __scsi_remove_device+0xa9/0xe0 [<ffffffff817d121b>] scsi_remove_device+0x2b/0x40 [<ffffffff817d1257>] sdev_store_delete+0x27/0x30 [<ffffffff81792ca8>] dev_attr_store+0x18/0x30 [<ffffffff8126f75e>] sysfs_kf_write+0x3e/0x50 [<ffffffff8126ea87>] kernfs_fop_write+0xe7/0x170 [<ffffffff811f5e9f>] vfs_write+0xaf/0x1d0 [<ffffffff811f69bd>] SyS_write+0x4d/0xc0 [<ffffffff81d24692>] system_call_fastpath+0x16/0x1b 776687bc ("block, blk-mq: draining can't be skipped even if bypass_depth was non-zero") made it easier to trigger this bug by making blk_queue_bypass_start() drain even when it loses the first bypass test to blk_cleanup_queue(); however, the bug has always been there even before the commit as blk_queue_bypass_start() could race against queue destruction, win the initial bypass test but perform the actual draining after blk_cleanup_queue() already destroyed all blkgs. Fix it by skippping calling into policy draining if all the blkgs are already gone. Signed-off-by:
Shirish Pargaonkar <spargaonkar@suse.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Reported-by:
Jet Chen <jet.chen@intel.com> Tested-by:
-
Roger Quadros authored
commit 40ddbf50 upstream. commit 65b97cf6 introduced in v3.7 caused a regression by using a reversed CS_MASK thus causing omap_calculate_ecc to always fail. As the NAND base driver never checks for .calculate()'s return value, the zeroed ECC values are used as is without showing any error to the user. However, this won't work and the NAND device won't be guarded by any error code. Fix the issue by using the correct mask. Code was tested on omap3beagle using the following procedure - flash the primary bootloader (MLO) from the kernel to the first NAND partition using nandwrite. - boot the board from NAND. This utilizes OMAP ROM loader that relies on 1-bit Hamming code ECC. Fixes: 65b97cf6 (mtd: nand: omap2: handle nand on gpmc) Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
