- 31 Mar, 2015 9 commits
-
-
Richard Cochran authored
The device features a 64 bit nanoseconds register, and so with this patch the driver is ready for the year 2038. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by:
-
Richard Cochran authored
The device appears to use a 64 bit nanoseconds register, and so with this patch the driver should be ready for the year 2038. Compile tested only. Signed-off-by:
-
Richard Cochran authored
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Richard Cochran authored
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by:
-
Richard Cochran authored
The device uses 64 bit nanoseconds register, and so with this patch the driver is ready for the year 2038. Signed-off-by:
-
Richard Cochran authored
This patch changes the posix clock code to prefer the new methods whenever they are implemented by the PHC drivers. Signed-off-by:
-
Richard Cochran authored
This patch changes the code to use the new method whenever implemented by the PHC driver. Signed-off-by:
-
Richard Cochran authored
Converting the PHC drivers over to the new methods is one step along the way to making them ready for 2038. Once all the drivers are up to date, then the old methods will be removed. Signed-off-by:
-
- 29 Mar, 2015 31 commits
-
-
Jon Paul Maloy authored
A message sent to a node after a successful name table lookup may still find that the destination socket has disappeared, because distribution of name table updates is non-atomic. If so, the message will be rejected back to the sender with error code TIPC_ERR_NO_PORT. If the source socket of the message has disappeared in the meantime, the message should be dropped. However, in the currrent code, the message will instead be subject to an unwanted tertiary lookup, because the function tipc_msg_lookup_dest() doesn't check if there is an error code present in the message before performing the lookup. In the worst case, the message may now find the old destination again, and be redirected once more, instead of being dropped directly as it should be. A second bug in this function is that the "prev_node" field in the message is not updated after successful lookup, something that may have unpredictable consequences. The problems arising from those bugs occur very infrequently. The third change in this function; the test on msg_reroute_msg_cnt() is purely cosmetic, reflecting that the returned value never can be negative. This commit corrects the two bugs described above. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-27 This series contains updates to i40e and i40evf. Jesse adds new device IDs to handle the new 20G speed for KR2. Mitch provides a fix for an issue that shows up as a panic or memory corruption when the device is brought down while under heavy stress. This is resolved by delaying the releasing of resources until we receive acknowledgment from the PF driver that the rings have indeed been stopped. Also adds firmware version information to ethtool reporting to align with ixgbevf behavior. Akeem increases the polling loop limiter, sine we found that in certain circumstances the firmware can take longer to be ready after a reset. ==================== Signed-off-by: -
David S. Miller authored
Toshiaki Makita says: ==================== Stacked vlan TSO On the basis of Netdev 0.1 discussion[1], I made a patch set to enable TSO for packets with multiple vlans. Currently, packets with multiple vlans are always segmented by software, which is caused by that netif_skb_features() drops most feature flags for multiple tagged packets. To allow NICs to segment them, we need to get rid of that check from core. Fortunately, recently introduced ndo_features_check() can be used to move the check to each driver, and this patch set is based on the idea. For the initial patch set, I chose 3 drivers, bonding, team, and igb, as candidates to enable TSO. I tested them and confirmed they works fine with this change. Here are samples of performance test results. As I expected, %sys gets pretty lower than before. * TEST1: vlan (.1Q) on vlan (.1ad) on igb (I350) - before $ netperf -t TCP_STREAM -H 192.168.10.1 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.02 933.72 Average: CPU %user %nice %system %iowait %steal %idle Average: all 0.13 0.00 11.28 0.01 0.00 88.58 - after $ netperf -t TCP_STREAM -H 192.168.10.1 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.01 936.13 Average: CPU %user %nice %system %iowait %steal %idle Average: all 0.24 0.00 4.17 0.01 0.00 95.58 * TEST2: vlan (.1Q) on bridge (.1ad vlan filtering) on team on igb (I350) - before $ netperf -t TCP_STREAM -H 192.168.10.1 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.01 936.28 Average: CPU %user %nice %system %iowait %steal %idle Average: all 0.41 0.00 11.57 0.01 0.00 88.01 - after $ netperf -t TCP_STREAM -H 192.168.10.1 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.02 935.72 Average: CPU %user %nice %system %iowait %steal %idle Average: all 0.14 0.00 7.66 0.01 0.00 92.19 In addition to above, I tested these configurations: - vlan (.1Q) on vlan (1.ad) on bonding on igb (I350) - vlan (.1Q) on vlan (1.Q) on igb (I350) - vlan (.1Q) on vlan (1.Q) on team on igb (I350) And didn't find any problem. [1] https://netdev01.org/sessions/18 https://netdev01.org/docs/netdev01_bof_8021ad_makita_150212.pdf ==================== Signed-off-by:
-
Toshiaki Makita authored
As datasheets for igb (I210, I350, 82576, etc.) say, maclen can be from 14 to 127, which is enough for reasonable number of vlan tags. My netperf test showed I350's TSO works pretty fine with multiple vlans. Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Toshiaki Makita authored
Team devices don't need to segment multiple tagged packets since their slaves can segment them. Signed-off-by:
-
Toshiaki Makita authored
Bonding devices don't need to segment multiple tagged packets since their slaves can segment them. Signed-off-by:
-
Toshiaki Makita authored
As there are a number of (especially virtual) devices that don't need the multiple vlan check, introduce passthru_features_check() for convenience. Signed-off-by:
-
Toshiaki Makita authored
To allow drivers to handle the features check for multiple tags, move the check to ndo_features_check(). As no drivers currently handle multiple tagged TSO, introduce dflt_features_check() and call it if the driver does not have ndo_features_check(). Signed-off-by:
-
Toshiaki Makita authored
Separate the two checks for single vlan and multiple vlans in netif_skb_features(). This allows us to move the check for multiple vlans to another function later. Signed-off-by:
-
Toshiaki Makita authored
Stacked vlan devices curretly have few features (GRO, HIGHDMA, LLTX). Since we have software fallbacks in case the NIC can not handle some features for multiple vlans, we can add the same features as the lower vlan devices for stacked vlan devices. This allows stacked vlan devices to create large (GSO) packets and not to segment packets. Those packets will be segmented by software on the real device, or even can be segmented by the NIC once TSO for multiple vlans becomes enabled by the following patches. The exception is those related to FCoE, which does not have a software fallback. Signed-off-by:
-
Alexei Starovoitov authored
existing TC action 'pedit' can munge any bits of the packet. Generalize it for use in bpf programs attached as cls_bpf and act_bpf via bpf_skb_store_bytes() helper function. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
David S. Miller authored
Guenter Roeck says: ==================== net: dsa: HW bridging, EEE support Patch 1 to 7 of this series prepare the drivers using the mv88e6xxx code for HW bridging support, without adding the code itself. For the most part this factors out common port initialization code. There is no functional change except for patch 3, which disables the message port bit for the CPU port to prevent packet duplication if HW bridging is configured. Patch 8 adds the infrastructure for hardware bridging support to the mv88e6xxx code. Patch 9 wires the MV88E6352 driver to support hardware bridging. Patches 10 to 12 add support for ndo_fdb functions to the dsa subsystem, and wire up the MV88E6352 driver to support those functions. Patches 13 to 16 add EEE support and HW bridging support to the mv88e6171 driver. This set of patches is from Andrew, applied on top of the first set of patches. The series applies to net-next as of 3/24/2015. Thanks a lot to Andrew Lunn for testing and valuable feedback. ==================== Signed-off-by: -
Andrew Lunn authored
Wire up the common code for setting up hardware bridging and access to the forwarding database. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Andrew Lunn authored
The mv88e6172 has support for EEE. Check for the product ID and call the common code if applicable. Signed-off-by:
-
Andrew Lunn authored
Make the code more readable by using defines for the switch IDs. Signed-off-by:
-
Andrew Lunn authored
Get the switch id and save it away in the private mv88x6xxx structure in a centralised piece of code, rather than each driver doing it itself. Signed-off-by:
-
Guenter Roeck authored
Add support for manipulating switch fdb entries by pointing to the ndo_fdb functions implemented for mv88e6xxxx. Reviewed-by:
-
Guenter Roeck authored
No vlan support at this time. Reviewed-by:
-
Guenter Roeck authored
Provide callbacks for ndo_fdb_add, ndo_fdb_del, and ndo_fdb_dump. Reviewed-by:
-
Guenter Roeck authored
Reviewed-by:
-
Guenter Roeck authored
Bridge support is similar for all chips supported by the mv88e6xxx code, so add the code there. Reviewed-by:
-
Guenter Roeck authored
Reviewed-by:
-
Guenter Roeck authored
This will simplify adding offloaded bridge support later on. Reviewed-by:
-
Guenter Roeck authored
This prepares the driver for hardware bridging. Reviewed-by:
-
Guenter Roeck authored
Split mv88e6xxx_reg_read and mv88e6xxx_reg_write into two functions each, one to acquire smi_mutex and one to get struct mii_bus *bus from struct dsa_switch *ds and to call the actual read/write function. Reviewed-by:
-
Guenter Roeck authored
Datasheet says that the Message Port bit should not be set for the CPU port. Having it set causes DSA tagged packets to be sent to the CPU port roughly every 30 seconds. Those packets are the same as real packets forwarded between switch ports if the switch is configured for switching between multiple ports. The packets are then bridged by the software bridge, resulting in duplicated packets on the network. Reported-by:
-
Guenter Roeck authored
Provide mv88e6xxx_setup_port_common() for common port initialization. Currently only write Port 1 Control and VLAN configuration since this will be needed for hardware bridging. More can be added later if desired/needed. Reviewed-by:
-
Guenter Roeck authored
Code used and needed in mv886xxx.c should be initialized there as well, so factor it out from the individual initialization files. Reviewed-by:
-
Haiyang Zhang authored
The vmbus_are_subchannels_present() also involves opening the channels, which may be too early at this point. Checking for subchannels is not necessary here. So this patch removes it. Subchannels will be opened when offer messages arrive. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Uwe Kleine-König authored
Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify accordingly. Moreover use devm_gpiod_get_index_optional for still simpler handling. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Haiyang Zhang authored
With this patch, we can send out multiple RNDIS data packets in one send buffer slot and one VMBus message. It reduces the overhead associated with VMBus messages. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
