Pull MMC host fixes from Ulf Hansson:

 - mtk-sd: Fix tuning for MT8173 HS200/HS400 mode

 - sdhci: Revert a fix for incorrect switch to HS mode

 - sdhci-msm: Fixup accesses to the DDR_CONFIG register

 - sdhci-of-esdhc: Revert a bad fix for erratum A-009204

 - sdhci-of-esdhc: Re-implement fix for erratum A-009204

 - sdhci-of-esdhc: Fixup P2020 errata handling

 - sdhci-pci: Disable broken CMDQ on Intel GLK based Lenovo systems

* tag 'mmc-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround
  mmc: sdhci: Add a quirk for broken command queuing
  mmc: sdhci: Workaround broken command queuing on Intel GLK
  mmc: sdhci-of-esdhc: fix P2020 errata handling
  mmc: sdhci: Update the tuning failed messages to pr_debug level
  mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"
  mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
  mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
  Revert "mmc: sdhci: Fix incorrect switch to HS mode"

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and other driver fixes for 5.5-rc3.

  The most noticable one is a much-reported fix for a random driver
  issue that came up from 5.5-rc1 compat_ioctl cleanups. The others are
  a chunk of habanalab driver fixes and intel_th driver fixes and new
  device ids.

  All have been in linux-next with no reported issues"

* tag 'char-misc-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  random: don't forget compat_ioctl on urandom
  intel_th: msu: Fix window switching without windows
  intel_th: Fix freeing IRQs
  intel_th: pci: Add Elkhart Lake SOC support
  intel_th: pci: Add Comet Lake PCH-V support
  habanalabs: remove variable 'val' set but not used
  habanalabs: rate limit error msg on waiting for CS

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for a number of reported
  issues.

  The majority here are some fixes for the wfx driver, but also in here
  is a comedi driver fix found during some code review, and an axis-fifo
  build dependancy issue to resolve some reported testing problems.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wfx: fix wrong error message
  staging: wfx: fix hif_set_mfp() with big endian hosts
  staging: wfx: detect race condition in WEP authentication
  staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1Mbps
  staging: wfx: fix rate control handling
  staging: wfx: firmware does not support more than 32 total retries
  staging: wfx: use boolean appropriately
  staging: wfx: fix counter overflow
  staging: wfx: fix case of lack of tx_retry_policies
  staging: wfx: fix the cache of rate policies on interface reset
  staging: axis-fifo: add unspecified HAS_IOMEM dependency
  staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 5.5-rc3.

  Only four small patches here:

   - atmel serial driver fix

   - msm_serial driver fix

   - sprd serial driver fix

   - tty core port fix

  The last tty core fix should resolve a long-standing bug with a race
  at port creation time that some people would see, and Sudip finally
  tracked down.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty/serial: atmel: fix out of range clock divider handling
  tty: link tty and port before configuring it as console
  serial: sprd: Add clearing break interrupt operation
  tty: serial: msm_serial: Fix lockup for sysrq and oops

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for some reported issues.

  Included in here are:

   - xhci build warning fix

   - ehci disconnect warning fix

   - usbip lockup fix and error cleanup fix

   - typec build fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci: Fix build warning seen with CONFIG_PM=n
  usbip: Fix error path of vhci_recv_ret_submit()
  usbip: Fix receive error in vhci-hcd when using scatter-gather
  USB: EHCI: Do not return -EPIPE when hub is disconnected
  usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'

Pull pin control fixes from Linus Walleij:
 "Sorry that this fixes pull request took a while. Too much christmas
  business going on.

  This contains a few really important Intel fixes and some odd fixes:

   - A host of fixes for the Intel baytrail and cherryview: properly
     serialize all register accesses and add the irqchip with the
     gpiochip as we need to, fix some pin lists and initialize the
     hardware in the right order.

   - Fix the Aspeed G6 LPC configuration.

   - Handle a possible NULL pointer exception in the core.

   - Fix the Kconfig dependencies for the Equilibrium driver"

* tag 'pinctrl-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT config
  pinctrl: Modify Kconfig to fix linker error
  pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio
  pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
  pinctrl: cherryview: Pass irqchip when adding gpiochip
  pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callback
  pinctrl: cherryview: Split out irq hw-init into a separate helper function
  pinctrl: baytrail: Pass irqchip when adding gpiochip
  pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Update North Community pin list
  pinctrl: baytrail: Really serialize all register accesses

Merge fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/Kconfig.debug: fix some messed up configurations
  mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG
  kasan: don't assume percpu shadow allocations will succeed
  kasan: use apply_to_existing_page_range() for releasing vmalloc shadow
  mm/memory.c: add apply_to_existing_page_range() helper
  kasan: fix crashes on access to memory mapped by vm_map_ram()

Pull power management fix from Rafael Wysocki:
 "Fix a problem related to CPU offline/online and cpufreq governors that
  in some system configurations may lead to a system-wide deadlock
  during CPU online"

* tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Avoid leaving stale IRQ work items during CPU offline

* pm-cpufreq:
  cpufreq: Avoid leaving stale IRQ work items during CPU offline

The erratum A-009204 workaround patch was reverted because of
incorrect implementation.

8b6dc6b2 mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add
        erratum A-009204 support"

This patch is to re-implement the workaround (add a 5 ms delay
before setting SYSCTL[RSTD] to make sure all the DMA transfers
are finished).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com
Fixes: 5dd19552 ("mmc: sdhci-of-esdhc: add erratum A-009204 support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull tpm fixes from Jarkko Sakkinen:
 "Bunch of fixes for rc3"

* tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm/tpm_ftpm_tee: add shutdown call back
  tpm: selftest: cleanup after unseal with wrong auth/policy test
  tpm: selftest: add test covering async mode
  tpm: fix invalid locking in NONBLOCKING mode
  security: keys: trusted: fix lost handle flush
  tpm_tis: reserve chip for duration of tpm_tis_core_init
  KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails
  KEYS: remove CONFIG_KEYS_COMPAT

Add shutdown call back to close existing session with fTPM TA
to support kexec scenario.

Add parentheses to function names in comments as specified in kdoc.
Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

The following build warning is seen if CONFIG_PM is disabled.

drivers/usb/host/xhci-pci.c:498:13: warning:
	unused function 'xhci_pci_shutdown'

Fixes: f2c710f7 ("usb: xhci: only set D3hot for pci device")
Cc: Henry Lin <henryl@nvidia.com>
Cc: stable@vger.kernel.org	# all stable releases with f2c710f7Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull sound fixes from Takashi Iwai:
 "A slightly high amount at this time, but all good and small fixes:

   - A PCM core fix that initializes the buffer properly for avoiding
     information leaks; it is a long-standing minor problem, but good to
     fix better now

   - A few ASoC core fixes for the init / cleanup ordering issues that
     surfaced after the recent refactoring

   - Lots of SOF and topology-related fixes went in, as usual as such
     hot topics

   - Several ASoC codec and platform-specific small fixes: wm89xx,
     realtek, and max98090, AMD, Intel-SST

   - A fix for the previous incomplete regression of HD-audio, now
     hitting Nvidia HDMI

   - A few HD-audio CA0132 codec fixes"

* tag 'sound-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
  ALSA: hda - Downgrade error message for single-cmd fallback
  ASoC: wm8962: fix lambda value
  ALSA: hda: Fix regression by strip mask fix
  ALSA: hda/ca0132 - Fix work handling in delayed HP detection
  ALSA: hda/ca0132 - Avoid endless loop
  ALSA: hda/ca0132 - Keep power on during processing DSP response
  ALSA: pcm: Avoid possible info leaks from PCM stream buffers
  ASoC: Intel: common: work-around incorrect ACPI HID for CML boards
  ASoC: SOF: Intel: split cht and byt debug window sizes
  ASoC: SOF: loader: fix snd_sof_fw_parse_ext_data
  ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header
  ASoC: simple-card: Don't create separate link when platform is present
  ASoC: topology: Check return value for soc_tplg_pcm_create()
  ASoC: topology: Check return value for snd_soc_add_dai_link()
  ASoC: core: only flush inited work during free
  ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89
  ASoC: core: Init pcm runtime work early to avoid warnings
  ASoC: Intel: sst: Add missing include <linux/io.h>
  ASoC: max98090: fix possible race conditions
  ASoC: max98090: exit workaround earlier if PLL is locked
  ...

The driver checks that the number of retries made by the device is
coherent with the rate policy. However, this check make sense only if
the device has returned RETRY_EXCEEDED.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-11-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct hif_mib_protected_mgmt_policy is an array of u8. There is no
reason to swap its bytes.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-10-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code has a special case to handle association with WEP. Before
to rework the tx data handling, let's try to detect any possible misuse
of this code.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-9-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When not using HT mode, minstrel always includes 1Mbps as fallback rate.
But, when using HT mode, this fallback is not included. Yet, it seems
that it could save some frames. So, this patch add it unconditionally.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-8-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A tx_retry_policy (the equivalent of a list of ieee80211_tx_rate in
hardware API) is not able to include a rate multiple time. So currently,
the driver merges the identical rates from the policy provided by
minstrel (and it try to do the best choice it can in the associated
flags) before to sent it to firmware.

Until now, when rates are merged, field "count" is set to
max(count1, count2). But, it means that the sum of retries for all rates
could be far less than initial number of retries. So, this patch changes
the value of field "count" to count1 + count2. Thus, sum of all retries
for all rates stay the same.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-7-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sum of all retries for a Tx frame cannot be superior to 32.

There are 4 rates at most. So this patch limits number of retries per
rate to 8.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-6-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field 'uploaded' is used as a boolean, so call it a boolean.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-5-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some weird behaviors were observed when connection is really good and
packets are small. It appears that sometime, number of packets in queues
can exceed 255 and generate an overflow in field usage_count.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-4-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In some rare cases, driver may not have any available tx_retry_policies.
In this case, the driver asks to mac80211 to stop sending data. However,
it seems that a race is possible and a few frames can be sent to the
driver. In this case, driver can't wait for free tx_retry_policies since
wfx_tx() must be atomic. So, this patch fix this case by sending these
frames with the special policy number 15.

The firmware normally use policy 15 to send internal frames (PS-poll,
beacons, etc...). So, it is not a so bad fallback.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-3-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Device and driver maintain a cache of rate policies (aka.
tx_retry_policy in hardware API).

When hif_reset() is sent to hardware, device resets its cache of rate
policies. In order to keep driver in sync, it is necessary to do the
same on driver.

Note, when driver tries to use a rate policy that has not been defined
on device, data is sent at 1Mbps. So, this patch should fix abnormal
throughput observed sometime after a reset of the interface.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-2-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.

This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.

Fixes: 8ee82bda ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Command queuing has been reported broken on some Lenovo systems based on
Intel GLK. This is likely a BIOS issue, so disable command queuing for
Intel GLK if the BIOS vendor string is "LENOVO".

Fixes: 8ee82bda ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL

The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
	host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
	host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

This patch is to fix them.
	host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

Fixes: 05cb6b2a ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes: a46e4271 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Some configuration items are messed up during conflict resolving.  For
example, STRICT_DEVMEM should not in testing menu, but kunit should.
This patch fixes all of them.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20191209155653.7509-1-changbin.du@gmail.comSigned-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 0a432dcb ("mm: shrinker: make shrinker not depend on
memcg kmem"), shrinkers' idr is protected by CONFIG_MEMCG instead of
CONFIG_MEMCG_KMEM, so it makes no sense to protect shrinker idr replace
with CONFIG_MEMCG_KMEM.

And in the CONFIG_MEMCG && CONFIG_SLOB case, shrinker_idr contains only
shrinker, and it is deferred_split_shrinker.  But it is never actually
called, since idr_replace() is never compiled due to the wrong #ifdef.
The deferred_split_shrinker all the time is staying in half-registered
state, and it's never called for subordinate mem cgroups.

Link: http://lkml.kernel.org/r/1575486978-45249-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 0a432dcb ("mm: shrinker: make shrinker not depend on memcg kmem")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>	[5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzkaller and the fault injector showed that I was wrong to assume that
we could ignore percpu shadow allocation failures.

Handle failures properly.  Merge all the allocated areas back into the
free list and release the shadow, then clean up and return NULL.  The
shadow is released unconditionally, which relies upon the fact that the
release function is able to tolerate pages not being present.

Also clean up shadows in the recovery path - currently they are not
released, which leaks a bit of memory.

Link: http://lkml.kernel.org/r/20191205140407.1874-3-dja@axtens.net
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reported-by: syzbot+82e323920b78d54aaed5@syzkaller.appspotmail.com
Reported-by: syzbot+59b7daa4315e07a994f1@syzkaller.appspotmail.com
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan_release_vmalloc uses apply_to_page_range to release vmalloc
shadow.  Unfortunately, apply_to_page_range can allocate memory to fill
in page table entries, which is not what we want.

Also, kasan_release_vmalloc is called under free_vmap_area_lock, so if
apply_to_page_range does allocate memory, we get a sleep in atomic bug:

	BUG: sleeping function called from invalid context at mm/page_alloc.c:4681
	in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 15087, name:

	Call Trace:
	 __dump_stack lib/dump_stack.c:77 [inline]
	 dump_stack+0x199/0x216 lib/dump_stack.c:118
	 ___might_sleep.cold.97+0x1f5/0x238 kernel/sched/core.c:6800
	 __might_sleep+0x95/0x190 kernel/sched/core.c:6753
	 prepare_alloc_pages mm/page_alloc.c:4681 [inline]
	 __alloc_pages_nodemask+0x3cd/0x890 mm/page_alloc.c:4730
	 alloc_pages_current+0x10c/0x210 mm/mempolicy.c:2211
	 alloc_pages include/linux/gfp.h:532 [inline]
	 __get_free_pages+0xc/0x40 mm/page_alloc.c:4786
	 __pte_alloc_one_kernel include/asm-generic/pgalloc.h:21 [inline]
	 pte_alloc_one_kernel include/asm-generic/pgalloc.h:33 [inline]
	 __pte_alloc_kernel+0x1d/0x200 mm/memory.c:459
	 apply_to_pte_range mm/memory.c:2031 [inline]
	 apply_to_pmd_range mm/memory.c:2068 [inline]
	 apply_to_pud_range mm/memory.c:2088 [inline]
	 apply_to_p4d_range mm/memory.c:2108 [inline]
	 apply_to_page_range+0x77d/0xa00 mm/memory.c:2133
	 kasan_release_vmalloc+0xa7/0xc0 mm/kasan/common.c:970
	 __purge_vmap_area_lazy+0xcbb/0x1f30 mm/vmalloc.c:1313
	 try_purge_vmap_area_lazy mm/vmalloc.c:1332 [inline]
	 free_vmap_area_noflush+0x2ca/0x390 mm/vmalloc.c:1368
	 free_unmap_vmap_area mm/vmalloc.c:1381 [inline]
	 remove_vm_area+0x1cc/0x230 mm/vmalloc.c:2209
	 vm_remove_mappings mm/vmalloc.c:2236 [inline]
	 __vunmap+0x223/0xa20 mm/vmalloc.c:2299
	 __vfree+0x3f/0xd0 mm/vmalloc.c:2356
	 __vmalloc_area_node mm/vmalloc.c:2507 [inline]
	 __vmalloc_node_range+0x5d5/0x810 mm/vmalloc.c:2547
	 __vmalloc_node mm/vmalloc.c:2607 [inline]
	 __vmalloc_node_flags mm/vmalloc.c:2621 [inline]
	 vzalloc+0x6f/0x80 mm/vmalloc.c:2666
	 alloc_one_pg_vec_page net/packet/af_packet.c:4233 [inline]
	 alloc_pg_vec net/packet/af_packet.c:4258 [inline]
	 packet_set_ring+0xbc0/0x1b50 net/packet/af_packet.c:4342
	 packet_setsockopt+0xed7/0x2d90 net/packet/af_packet.c:3695
	 __sys_setsockopt+0x29b/0x4d0 net/socket.c:2117
	 __do_sys_setsockopt net/socket.c:2133 [inline]
	 __se_sys_setsockopt net/socket.c:2130 [inline]
	 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2130
	 do_syscall_64+0xfa/0x780 arch/x86/entry/common.c:294
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Switch to using the apply_to_existing_page_range() helper instead, which
won't allocate memory.

[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
Link: http://lkml.kernel.org/r/20191205140407.1874-2-dja@axtens.net
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

apply_to_page_range() takes an address range, and if any parts of it are
not covered by the existing page table hierarchy, it allocates memory to
fill them in.

In some use cases, this is not what we want - we want to be able to
operate exclusively on PTEs that are already in the tables.

Add apply_to_existing_page_range() for this.  Adjust the walker
functions for apply_to_page_range to take 'create', which switches them
between the old and new modes.

This will be used in KASAN vmalloc.

[akpm@linux-foundation.org: reduce code duplication]
[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
[akpm@linux-foundation.org: initialize __apply_to_page_range::err]
Link: http://lkml.kernel.org/r/20191205140407.1874-1-dja@axtens.netSigned-off-by: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With CONFIG_KASAN_VMALLOC=y any use of memory obtained via vm_map_ram()
will crash because there is no shadow backing that memory.

Instead of sprinkling additional kasan_populate_vmalloc() calls all over
the vmalloc code, move it into alloc_vmap_area(). This will fix
vm_map_ram() and simplify the code a bit.

[aryabinin@virtuozzo.com: v2]
  Link: http://lkml.kernel.org/r/20191205095942.1761-1-aryabinin@virtuozzo.comLink: http://lkml.kernel.org/r/20191204204534.32202-1-aryabinin@virtuozzo.com
Fixes: 3c5c3cfb ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Alexander Potapenko <glider@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "A mix of regression fixes and regular fixes for stable trees:

   - fix swapped error messages for qgroup enable/rescan

   - fixes for NO_HOLES feature with clone range

   - fix deadlock between iget/srcu lock/synchronize srcu while freeing
     an inode

   - fix double lock on subvolume cross-rename

   - tree log fixes
      * fix missing data checksums after replaying a log tree
      * also teach tree-checker about this problem
      * skip log replay on orphaned roots

   - fix maximum devices constraints for RAID1C -3 and -4

   - send: don't print warning on read-only mount regarding orphan
     cleanup

   - error handling fixes"

* tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: send: remove WARN_ON for readonly mount
  btrfs: do not leak reloc root if we fail to read the fs root
  btrfs: skip log replay on orphaned roots
  btrfs: handle ENOENT in btrfs_uuid_tree_iterate
  btrfs: abort transaction after failed inode updates in create_subvol
  Btrfs: fix hole extent items with a zero size after range cloning
  Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
  Btrfs: make tree checker detect checksum items with overlapping ranges
  Btrfs: fix missing data checksums after replaying a log tree
  btrfs: return error pointer from alloc_test_extent_buffer
  btrfs: fix devs_max constraints for raid1c3 and raid1c4
  btrfs: tree-checker: Fix error format string for size_t
  btrfs: don't double lock the subvol_sem for rename exchange
  btrfs: handle error in btrfs_cache_block_group
  btrfs: do not call synchronize_srcu() in inode_tree_del
  Btrfs: fix cloning range with a hole when using the NO_HOLES feature
  btrfs: Fix error messages in qgroup_rescan_init

The comment says "this should never fail", but it definitely can fail
when you have odd initial boot filesystems, or kernel configurations.

So get the error handling right: filp_open() returns an error pointer.
Reported-by: Jesse Barnes <jsbarnes@google.com>
Reported-by: youling 257 <youling257@gmail.com>
Fixes: 8243186f ("fs: remove ksys_dup()")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A small set of fixes for mostly minor issues here, the only real code
  ones are Wen Yang's fixes for error handling in the core and Christian
  Marussi's list_voltage() change which is a fix for disruptively bad
  performance for regulators with continuous voltage control (which are
  rare)"

* tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rn5t618: fix module aliases
  regulator: max77650: add of_match table
  regulator: core: avoid unneeded .list_voltage calls
  regulator: s5m8767: Fix a warning message
  regulator: core: fix regulator_register() error paths to properly release rdev
  regulator: fix use after free issue

Pull spi fixes from Mark Brown:
 "A relatively large set of fixes here, the biggest part of it is for
  fallout from the GPIO descriptor rework that affected several of the
  devices with usable native chip select support. There's also some new
  PCI IDs for Intel Jasper Lake devices.

  The conversion to platform_get_irq() in the fsl driver is an
  incremental fix for build errors introduced on SPARC by the earlier
  fix for error handling in probe in that driver"

* tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl: use platform_get_irq() instead of of_irq_to_resource()
  spi: nxp-fspi: Ensure width is respected in spi-mem operations
  spi: spi-ti-qspi: Fix a bug when accessing non default CS
  spi: fsl: don't map irq during probe
  spi: spi-cavium-thunderx: Add missing pci_release_regions()
  spi: sprd: Fix the incorrect SPI register
  gpiolib: of: Make of_gpio_spi_cs_get_count static
  spi: fsl: Handle the single hardwired chipselect case
  gpio: Handle counting of Freescale chipselects
  spi: fsl: Fix GPIO descriptor support
  spi: dw: Correct handling of native chipselect
  spi: cadence: Correct handling of native chipselect
  spi: pxa2xx: Add support for Intel Jasper Lake

Pull x86 fix from Ingo Molnar:
 "Fix kexec booting with certain EFI memory map layouts"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage

Pull timer fixes from Ingo Molnar:
 "Add HPET quirks for the Intel 'Coffee Lake H' and 'Ice Lake' platforms"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel: Disable HPET on Intel Ice Lake platforms
  x86/intel: Disable HPET on Intel Coffee Lake H platforms

Pull scheduler fix from Ingo Molnar:
 "Fix the guest-nice cpustat values in /proc"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime, proc/stat: Fix incorrect guest nice cpustat value