Merge tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig

Qualcomm ARM64 defconfig updates for v6.6

This marks the MSM8996 global clock controller as buildin, to avoid boot
issues. The SC8280XP GPU clock controller is enabled, to enable GPU
support. A series of drivers needed to boot the IPQ5018 platform is
enabled, and the ethernet PHY to enable Ethernet on SA8775P is enabled.

* tag 'qcom-arm64-defconfig-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Enable IPQ5018 SoC base configs
  arm64: defconfig: enable the SerDes PHY for Qualcomm DWMAC
  arm64: defconfig: enable Qualcomm MSM8996 Global Clock Controller as built-in
  arm64: defconfig: Enable Qualcomm SC8280XP GPUCC

Link: https://lore.kernel.org/r/20230818023651.2484774-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.6-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig

Enable some options needed for Rockchip boards in the main defconfig.

* tag 'v6.6-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: defconfig: Enable drivers for the Odroid-M1 board
  arm64: defconfig: Enable GPIO_SYSCON
  arm64: defconfig: Enable Rockchip OTP memory driver
  arm64: defconfig: Enable PHY_ROCKCHIP_NANENG_COMBO_PHY

Link: https://lore.kernel.org/r/5353918.Isy0gbHreE@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

SCMI regulators are used in the ARMv7 STMicrolectronics stm32mp boards:
- for STM32MP13: stm32mp135f-dk
- for STM32MP15 boards with SCMI variant, introduced by commit 5b7e5831
  ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
  * stm32mp157c-ev1-scmi
  * stm32mp157c-ed1-scmi
  * stm32mp157c-dk2-scmi
  * stm32mp157a-dk1-scmi
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230816123055.12636-1-alexandre.torgue@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-config-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig

TI K3 defconfig updates for v6.6

- Various configs for K3 boards including ECAP, Thermal,
  RTI watchdog, mailbox, sound, MCAN, UFS.
- Enable PRUSS for am64/am65x boards such as IOT2050.
- Enable IT66121 for BeaglePlay HDMI.

* tag 'ti-k3-config-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: defconfig: Enable ITE_IT66121 HDMI transmitter
  arm64: defconfig: Enable TI PRUSS
  arm64: defconfig: Enable various configs for TI K3 platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-defconfig-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig

i.MX defconfig change for 6.6:

- Enable i.MX93 device drivers in arm64 defconfig.
- Enable Redpine 91X WLAN and NXP UART Bluetooth driver.
- Enable DRM_IMX_LCDIF, IMX_REMOTEPROC and RPMSG_VIRTIO drivers.
- Enable SL28VPD NVMEM layout support.

* tag 'imx-defconfig-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: Enable Redpine 91X wlan driver
  arm64: defconfig: Enable CONFIG_DRM_IMX_LCDIF
  arm64: defconfig: enable driver for bluetooth nxp uart
  arm64: defconfig: Enable i.MX93 devices
  arm64: defconfig: select IMX_REMOTEPROC and RPMSG_VIRTIO
  arm64: defconfig: enable SL28VPD NVMEM layout

Link: https://lore.kernel.org/r/20230813133354.847010-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

We would like to support some additional OMAP class devices using the
common multi_v7_defconfig. To start, enable some audio/display related
modules:

DRM_OMAP/OMAP5_DSS_HDMI: For base DRM display support.
DRM_TI_TFP410: Used as a display bridge for several EVM's panels.
DRM_TI_TPD12S015: HDMI encoder on several OMAP/Sitara EVMs.
SND_SOC_TLV320AIC3X_I2C: For I2C attached TLV320AIC3x codecs.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This allows us to use the various remote processors on the TI OMAP and
Keystone family devices using the multi-v7 config, instead of only
with the OMAP/Keystone specific defconfigs (which we would like to
move away from needing).
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A number of TI based platforms use TLV320AIC3x since it was their
standard audio CODEC for quite some time, including the Beagle X15.
Enable it multi_v7_defconfig to improve test coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230731-arm-tlv320aic31xx-config-v1-1-013c8c321dad@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-defconfig-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig

Renesas ARM defconfig updates for v6.6

  - Enable CSI driver support for Renesas RZ/V2M based platforms,
  - Enable MTU3a PWM and RAA215300 PMIC/RTC driver support, as used on
    Renesas RZ/{G2L,G2LC,G2UL,V2L} SMARC EVKs.

* tag 'renesas-arm-defconfig-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable PMIC RAA215300 and RTC ISL 1208 configs
  arm64: defconfig: Enable Renesas MTU3a PWM config
  arm64: defconfig: Enable Renesas RZ/V2M CSI driver

Link: https://lore.kernel.org/r/cover.1690545141.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The Librem 5 and it's devkit have it connected via SDIO.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable CONFIG_DRM_ITE_IT66121.

ILITEK ITE-IT66121 is an HDMI transmitter, which takes parallel video
signals (DPI) as input. It is being used on TI's AM625 SoC based
BeaglePlay platform[0].

[0]: https://beagleboard.org/playSigned-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20230809084559.17322-7-a-bhatia1@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Enables clk & pinctrl related configs, required to boot the IPQ5018
platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-7-git-send-email-quic_srichara@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable CONFIG_DRM_IMX_LCDIF so that display output can be functional
by default on the imx8mp-evk board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The Programmable Realtime Unit - Industrial Communication Subsystem
(PRU-ICSS) known as PRUSS, is a low-latency microcontroller subsystem
used for industrial networking and other hard real-time functions in
the TI K3 SoCs such as AM654x, AM64x.

AM654x-EVM, AM64xx-EVM, and iot2050 use the PRUSS driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20230808130131.3081482-1-danishanwar@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Enable TI ECAP, DP83869 driver, OMAP2 Mailbox, K3 remote proc
SND_SOC_J721E_EVM, MCAN, UFS and RTI, Thermal driver to be built
as module.

These configs are supported on below TI platforms

ECAP on am642, am65 iot2050 EVM.

DP83869 on AM64x EVM.

OMAP2 Mailbox, K3 remote proc on AM64 on J7200,J721E and J784S4 SOC.

CONFIG_SND_SOC_J721E_EVM on J721E.

MCAN on AM68 SK, J721E, J721S2, AM642 AM642-Phyboards

UFS feature on J721E EVM

RTI watchdog on AM62, AM62A, AM64, AM65, J721E and J7200 SOC.

Thermal driver on AM62, AM62A AM65, J7200, J721E, J721S2,
J784S4  platform.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230731161048.2522154-1-u-kumar1@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Enable driver for Bluetooth NXP UART applicable amongst others for NXP
88W8997 and IW416 as found on multiple Toradex SoMs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

These drivers are used on i.MX93 based devices.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Hardkernel Odroid-M1 board is supported since commit fd358326
("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board"). Enable all
drivers needed by that board in the defconfig to let the automated
test systems to check them on the real hardware.

The drivers were configured to be compiled as modules if that was
supported.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230720080838.933890-1-m.szyprowski@samsung.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

roc-rk3328-cc board has vcc_sdio regulator controlled by a special
output only gpio pin. This special pin can now be reference as
<&grf_gpio 0> via gpio-syscon driver, as mentioned in below commit.

commit <99165b93> ("arm64: dts: rockchip: add sdmmc UHS support for
roc-rk3328-cc")

So, enable bydefault on the defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230719102427.3617577-1-jagan@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

i.MX8ULP relies remoteproc and rpmsg enabled to communicate with CM33
for boot purpose, because some boot related things are handled by
CM33.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The Kontron sl28 board is supported upstream and also tested in the
KernelCI. Enable support for its VPD EEPROM where the base ethernet
address is stored.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable the SGMII/SerDes PHY driver. This module is required to enable
ethernet on Qualcomm sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230622121141.218623-1-brgl@bgdev.plSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Pull xtensa fixes from Max Filippov:

 - fix interaction between unaligned exception handler and load/store
   exception handler

 - fix parsing ISS network interface specification string

 - add comment about etherdev freeing to ISS network driver

* tag 'xtensa-20230716' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix unaligned and load/store configuration interaction
  xtensa: ISS: fix call to split_if_spec
  xtensa: ISS: add comment about etherdev freeing

Pull perf fix from Borislav Petkov:

 - Fix a lockdep warning when the event given is the first one, no event
   group exists yet but the code still goes and iterates over event
   siblings

* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR

Pull objtool fixes from Borislav Petkov:

 - Mark copy_iovec_from_user() __noclone in order to prevent gcc from
   doing an inter-procedural optimization and confuse objtool

 - Initialize struct elf fully to avoid build failures

* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  iov_iter: Mark copy_iovec_from_user() noclone
  objtool: initialize all of struct elf

Pull scheduler fixes from Borislav Petkov:

 - Remove a cgroup from under a polling process properly

 - Fix the idle sibling selection

* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: use kernfs polling functions for PSI trigger polling
  sched/fair: Use recent_used_cpu to test p->cpus_ptr

Pull pin control fixes from Linus Walleij:
 "I'm mostly on vacation but what would vacation be without a few
  critical fixes so people can use their gaming laptops when hiding away
  from the sun (or rain)?

   - Fix a really annoying interrupt storm in the AMD driver affecting
     Asus TUF gaming notebooks

   - Fix device tree parsing in the Renesas driver"

* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Unify debounce handling into amd_pinconf_set()
  pinctrl: amd: Drop pull up select configuration
  pinctrl: amd: Use amd_pinconf_set() for all config options
  pinctrl: amd: Only use special debounce behavior for GPIO 0
  pinctrl: renesas: rzg2l: Handle non-unique subnode names
  pinctrl: renesas: rzv2m: Handle non-unique subnode names

Pull smb client fixes from Steve French:

 - Two reconnect fixes: important fix to address inFlight count to leak
   (which can leak credits), and fix for better handling a deleted share

 - DFS fix

 - SMB1 cleanup fix

 - deferred close fix

* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix mid leak during reconnection after timeout threshold
  cifs: is_network_name_deleted should return a bool
  smb: client: fix missed ses refcounting
  smb: client: Fix -Wstringop-overflow issues
  cifs: if deferred close is disabled then close files immediately

Pull powerpc fixes from Michael Ellerman:

 - Fix Speculation_Store_Bypass reporting in /proc/self/status on
   Power10

 - Fix HPT with 4K pages since recent changes by implementing pmd_same()

 - Fix 64-bit native_hpte_remove() to be irq-safe

Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.

* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
  powerpc/64e: Fix obtool warnings in exceptions-64e.S
  powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
  powerpc/64s: Fix native_hpte_remove() to be irq-safe

Pull hardening fixes from Kees Cook:

 - Remove LTO-only suffixes from promoted global function symbols
   (Yonghong Song)

 - Remove unused .text..refcount section from vmlinux.lds.h (Petr Pavlu)

 - Add missing __always_inline to sparc __arch_xchg() (Arnd Bergmann)

 - Claim maintainership of string routines

* tag 'hardening-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  sparc: mark __arch_xchg() as __always_inline
  MAINTAINERS: Foolishly claim maintainership of string routines
  kallsyms: strip LTO-only suffixes from promoted global functions
  vmlinux.lds.h: Remove a reference to no longer used sections .text..refcount

Merge tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

 - fprobe: Add a comment why fprobe will be skipped if another kprobe is
   running in fprobe_kprobe_handler().

 - probe-events: Fix some issues related to fetch-arguments:

    - Fix double counting of the string length for user-string and
      symstr. This will require longer buffer in the array case.

    - Fix not to count error code (minus value) for the total used
      length in array argument. This makes the total used length
      shorter.

    - Fix to update dynamic used data size counter only if fetcharg uses
      the dynamic size data. This may mis-count the used dynamic data
      size and corrupt data.

    - Revert "tracing: Add "(fault)" name injection to kernel probes"
      because that did not work correctly with a bug, and we agreed the
      current '(fault)' output (instead of '"(fault)"' like a string)
      explains what happened more clearly.

    - Fix to record 0-length (means fault access) data_loc data in fetch
      function itself, instead of store_trace_args(). If we record an
      array of string, this will fix to save fault access data on each
      entry of the array correctly.

* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
  Revert "tracing: Add "(fault)" name injection to kernel probes"
  tracing/probes: Fix to update dynamic data counter if fetcharg uses it
  tracing/probes: Fix not to count error code to total length
  tracing/probes: Fix to avoid double count of the string length on the array
  fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running

Pull spi fixes from Mark Brown:
 "A couple of fairly minor driver specific fixes here, plus a bunch of
  maintainership and admin updates. Nothing too remarkable"

* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  mailmap: add entry for Jonas Gorski
  MAINTAINERS: add myself for spi-bcm63xx
  spi: s3c64xx: clear loopback bit after loopback test
  spi: bcm63xx: fix max prepend length
  MAINTAINERS: Add myself as a maintainer for Microchip SPI

Pull regmap fix from Mark Brown:
 "One fix for an out of bounds access in the interupt code here"

* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Fix out-of-bounds access when allocating config buffers

Pull iommu fixes from Joerg Roedel:

 - Fix a regression causing a crash on sysfs access of iommu-group
   specific files

 - Fix signedness bug in SVA code

* tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()
  iommu: Fix crash during syfs iommu_groups/N/type

Pull x86 CFI fixes from Peter Zijlstra:
 "Fix kCFI/FineIBT weaknesses

  The primary bug Alyssa noticed was that with FineIBT enabled function
  prologues have a spurious ENDBR instruction:

    __cfi_foo:
	endbr64
	subl	$hash, %r10d
	jz	1f
	ud2
	nop
    1:
    foo:
	endbr64 <--- *sadface*

  This means that any indirect call that fails to target the __cfi
  symbol and instead targets (the regular old) foo+0, will succeed due
  to that second ENDBR.

  Fixing this led to the discovery of a single indirect call that was
  still doing this: ret_from_fork(). Since that's an assembly stub the
  compiler would not generate the proper kCFI indirect call magic and it
  would not get patched.

  Brian came up with the most comprehensive fix -- convert the thing to
  C with only a very thin asm wrapper. This ensures the kernel thread
  boostrap is a proper kCFI call.

  While discussing all this, Kees noted that kCFI hashes could/should be
  poisoned to seal all functions whose address is never taken, further
  limiting the valid kCFI targets -- much like we already do for IBT.

  So what was a 'simple' observation and fix cascaded into a bunch of
  inter-related CFI infrastructure fixes"

* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
  x86/fineibt: Poison ENDBR at +0
  x86: Rewrite ret_from_fork() in C
  x86/32: Remove schedule_tail_wrapper()
  x86/cfi: Extend ENDBR sealing to kCFI
  x86/alternative: Rename apply_ibt_endbr()
  x86/cfi: Extend {JMP,CAKK}_NOSPEC comment

Pull SCSI fixes from James Bottomley:
 "This is a bunch of small driver fixes and a larger rework of zone disk
  handling (which reaches into blk and nvme).

  The aacraid array-bounds fix is now critical since the security people
  turned on -Werror for some build tests, which now fail without it"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Handle SRB status value 0x30
  scsi: block: Improve checks in blk_revalidate_disk_zones()
  scsi: block: virtio_blk: Set zone limits before revalidating zones
  scsi: block: nullblk: Set zone limits before revalidating zones
  scsi: nvme: zns: Set zone limits before revalidating zones
  scsi: sd_zbc: Set zone limits before revalidating zones
  scsi: ufs: core: Add support for qTimestamp attribute
  scsi: aacraid: Avoid -Warray-bounds warning
  scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
  scsi: ufs: core: Update contact email for monitor sysfs nodes
  scsi: scsi_debug: Remove dead code
  scsi: qla2xxx: Use vmalloc_array() and vcalloc()
  scsi: fnic: Use vmalloc_array() and vcalloc()
  scsi: qla2xxx: Fix error code in qla2x00_start_sp()
  scsi: qla2xxx: Silence a static checker warning
  scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Don't require quirk to use duplicate namespace identifiers
        (Christoph, Sagi)
      - One more BOGUS_NID quirk (Pankaj)
      - IO timeout and error hanlding fixes for PCI (Keith)
      - Enhanced metadata format mask fix (Ankit)
      - Association race condition fix for fibre channel (Michael)
      - Correct debugfs error checks (Minjie)
      - Use PAGE_SECTORS_SHIFT where needed (Damien)
      - Reduce kernel logs for legacy nguid attribute (Keith)
      - Use correct dma direction when unmapping metadata (Ming)

 - Fix for a flush handling regression in this release (Christoph)

 - Fix for batched request time stamping (Chengming)

 - Fix for a regression in the mq-deadline position calculation (Bart)

 - Lockdep fix for blk-crypto (Eric)

 - Fix for a regression in the Amiga partition handling changes
   (Michael)

* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
  block: queue data commands from the flush state machine at the head
  blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
  nvme-pci: fix DMA direction of unmapping integrity data
  nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
  block/mq-deadline: Fix a bug in deadline_from_pos()
  nvme: ensure disabling pairs with unquiesce
  nvme-fc: fix race between error recovery and creating association
  nvme-fc: return non-zero status code when fails to create association
  nvme: fix parameter check in nvme_fault_inject_init()
  nvme: warn only once for legacy uuid attribute
  block: remove dead struc request->completion_data field
  nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
  nvmet: use PAGE_SECTORS_SHIFT
  nvme: add BOGUS_NID quirk for Samsung SM953
  blk-crypto: use dynamic lock class for blk_crypto_profile::lock
  block/partition: fix signedness issue for Amiga partitions

Pull io_uring fix from Jens Axboe:
 "Just a single tweak for the wait logic in io_uring"

* tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux:
  io_uring: Use io_schedule* in cqring wait

Pull RISC-V fixes from Palmer Dabbelt:

 - fix a formatting error in the hwprobe documentation

 - fix a spurious warning in the RISC-V PMU driver

 - fix memory detection on rv32 (problem does not manifest on any known
   system)

 - avoid parsing legacy parsing of I in ACPI ISA strings

* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Don't include Zicsr or Zifencei in I from ACPI
  riscv: mm: fix truncation warning on RV32
  perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
  Documentation: RISC-V: hwprobe: Fix a formatting error