- 09 Feb, 2010 18 commits
-
-
Jayamohan Kallickal authored
This patch replaces 2009 with 2010 in copyright statement Signed-off-by:
Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Jayamohan Kallickal authored
Ring mode is not used. This patch removes the code. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Dmitry Torokhov authored
pvscsi_setup_msix() expects 'irq' argument to be an int but is being passed unsigned int. Unsigned int is more proper type for IRQ number so let's use it. This shuts off a compile warning with recent compilers. Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Acked-by:
Alok Kataria <akataria@vmware.com> Signed-off-by:
-
Martin K. Petersen authored
DIF and DIX errors are handled identically at this point. Collapse the switch cases into one and let scsi_io_completion print result and sense data. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Roel Kluin authored
Regardless of the flag state, the branches execute the same code Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Jayamohan Kallickal authored
This fix allows the driver to load when the FW allows more cids than than the driver supports. The driver will limit the number of cid to what it can support. There was no reason to fail the driver load,so, correcting that Signed-off-by:
-
Jayamohan Kallickal authored
The number of SGE's supported is fixed to what the chip expects. Also, the max sectors set to tested values Signed-off-by:
-
Jayamohan Kallickal authored
The patch fixes a but where the sg_next is not assigned and hence the first sge was being resused wrongly Signed-off-by:
-
Kashyap, Desai authored
Version upgraded to 04.100.01.00. Signed-off-by:
Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by:
Eric Moore <eric.moore@lsi.com> Signed-off-by:
-
Kashyap, Desai authored
If TLR is supported for end device, MPT2SAS driver will enable the TLR bit in the SCSI_IO for every request. If there is a response with MPI2_SCSITASKMGMT_RSP_INVALID_FRAME, the driver will turn off the TLR logic. [jejb: updated to new transport class TLR API] Signed-off-by:
-
Kashyap, Desai authored
Update header to latest MPI SPEC revision. Signed-off-by:
-
Kashyap, Desai authored
Added new callbacks phy_enable and set_phy_speed in the mpt2sas_transport_functions template. This will allow end user to enable/disable phys and change links rates using the SysFS interface. Current implementation only supports direct attached phys, but we could in the future add support for expander based phys. A new subroutine mpt2sas_config_set_sas_iounit_pg1 was added; this wrapper function used to send request to controller firmware to modify the phys and link rates. A new subroutine _transport_find_local_phy was added; a function for easly obtaining the local phy object for direct attached. Example to disable a phy echo 0 > /sys/class/phy3:0/enable Example to enable the same phy echo 1 > /sys/class/phy3:0/enable Example to change the link rate to 1.5 #echo "1.5 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 1.5 Gbit Example to change the link rate to 3.0 #echo "3.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 3.0 Gbit Example to change the link rate to 6.0 #echo "6.0 Gbit" > /sys/class/phy3:0/maximum_linkrate #cat /sys/class/phy3:0/negotiated_linkrate 6.0 Gbit Signed-off-by:
-
Kashyap, Desai authored
Adding support for raid transport layer. This will provide sysfs attributes containing raid level, state, and resync rate. MPT2SAS module will select RAID_ATTRS. Signed-off-by:
-
Kashyap, Desai authored
On ppc64, an 32bit application was failing due to data buffers not being copied properly from user to kernel memory. The problem due to improper conversion of 32 to 64 bit pointers. The fix is to use compat_ptr to setup the pointer compatibility in the routine _ctl_compat_mpt_command. Signed-off-by:
-
Kashyap, Desai authored
(1) change the formentioned string from logging_level to fwfault_debug (2) set ioc->fwfault_debug to the command line option mpt2sas_fwfault_debug setting at driver load time. Signed-off-by:
-
Kashyap, Desai authored
Use resource_size_t to define the type resource for the system interface register set. The existing implementation was using "unsigned long" which would be 32 bit in 32 bit OS. If 32 bit OS is using 64 bit physical address space for the system interface register set, we need to shift to using resource_size_t which takes care of physical address space. Signed-off-by:
-
Kashyap, Desai authored
The driver was modified to return -ENODATA when there is a timeout via ioctl path. Signed-off-by:
-
Kashyap, Desai authored
The driver hangs when doing `rmmod mpt2sas` if there are any IR volumes present.The hang is due the scsi midlayer trying to access the IR volumes after the driver releases controller resources. Perhaps when scsi_remove_host is called,the scsi mid layer is sending some request. This doesn't occur for bare drives becuase the driver is already reporting those drives deleted prior to calling mpt2sas_base_detach. To solve this issue, we need to delete the volumes as well. Signed-off-by:
-
- 08 Feb, 2010 1 commit
-
-
James Bottomley authored
The mpt2sas driver wants to use transport layer retries (TLR) so the simplest thing to do seems to be to add the enabling flags and checks to the SAS transport class, since they're a SAS specific protocol feature. Signed-off-by:
-
- 18 Jan, 2010 21 commits
-
-
George Kadianakis authored
A Gentoo bug report [1] showed that as of 2.6.31 lpfc only uses INTx interrupts. This patch restores lpfc's ability to support MSI-X/MSI interrupts that the "Addition of SLI4 Interface - Base Support" patch [2] broke. It reestablishes MSI-X as the default interrupt method and in case MSI-X is not supported lpfc_sli{4,}_enable_intr fallbacks to MSI and then to INTx. [1]: http://bugs.gentoo.org/show_bug.cgi?id=296319 [2]: commit da0436e9 [James Smart: Background: Nothing Broke. This was intended. We had originally enabled MSI-X by default, but in qualification within the last 12 months, we encountered a major catch-22: There were at least 4 platforms, from 2 major OEMs, that : - Say they support MSI-X - platform routines work and act as if they do. - We enable it, generate a test interrupt to check they really do deliver it, and it works. - But shortly after attachment, the system hangs or loses interrupts, resulting in a bad system behavior. Given the distro's picking up the 2.6.32 kernel, we had to stick with a default of MSI-X off, with user-enabled MSI-X as these platforms couldn't get fixed. However, we're also now encountering platforms that require MSI-X and never INTx, so we must change. It's desired also for also for performance reasons. So - now (2.6.33) is the right time to re-enable MSI-X by default. ] [jejb: fix up comment on default values] Signed-off-by:George Kadianakis <desnacked@gmail.com> Acked-by:
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Giridhar Malavali authored
Firmware is loaded from flash for these ISP types. Signed-off-by:
-
Giridhar Malavali authored
[jejb: fixed printk casting issues] Signed-off-by:
Sarang Radke <sarang.radke@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
qla2xxx: EEH added call to pci_restore_state. qla2xxx: EEH added delay in slot reset routine. qla2xxx: EEH moved call to pci_save_state(), see (1). qla2xxx: EEH additional changes for RHEL5.5. qla2xxx: EEH added function call, removed function call, see (2). (1) In qla2xxx_probe_one the call to pci_save_state() has been moved to after the call to qla2xxx_request_irqs(). (2) Add call to pci_disable_pcie_error_reporting() in remove_one. Delete call to pci_cleanup_aer_uncorrect_error_status() in pci_resume. Signed-off-by: -
Jayamohan Kallickal authored
This patch enables TEXT Request / Response for the driver Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes can_queue being uninitiallized since it was done before beiscsi_get_params was called. Thanks to Mike Christie for identifying this Signed-off-by:
-
Jayamohan Kallickal authored
This fixes a situation where the sessions were being killed whenever LinkUP is notified rather than LinkDown Signed-off-by:
-
Jayamohan Kallickal authored
This patches enables async mode for mcc rings so that multiple requests can be queued. Signed-off-by:
-
Jayamohan Kallickal authored
This patch removes the endianess change that was wrongly added for data_count Signed-off-by:
-
Jayamohan Kallickal authored
This patch decides whether ack based completion is required or not Signed-off-by:
-
Jayamohan Kallickal authored
This patch enables use of opcode that is passed in Signed-off-by:
-
Jayamohan Kallickal authored
This patch moves pci_set_drvdata to inside beiscsi_hba_alloc Signed-off-by:
-
Jayamohan Kallickal authored
This patch adds opcodes in thecompletion path that were missed out earlier Signed-off-by:
-
Jayamohan Kallickal authored
This patch will link the current allocated wrb with the next wrb that will be allocated. This is a requirement from the chip. Signed-off-by:
-
Jayamohan Kallickal authored
We need to hold on to ep resources untill invalidate and close connection are completed Signed-off-by:
-
Jayamohan Kallickal authored
This patch enablesi be2iscsi to use the start number and number of cids/icd provided by FW rather than hard coded values. Signed-off-by:
-
Dave Jones authored
converted using this script.. perl -p -i -e 's|ulong32|u32|g' drivers/scsi/gdth* perl -p -i -e 's|ulong64|u64|g' drivers/scsi/gdth* perl -p -i -e 's|ushort|u16|g' drivers/scsi/gdth* perl -p -i -e 's|unchar|u8|g' drivers/scsi/gdth* perl -p -i -e 's|ulong|unsigned long|g' drivers/scsi/gdth* perl -p -i -e 's|PACKED|__attribute__((packed))|g' drivers/scsi/gdth* sha1sum of the generated code was identical before and after. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Douglas Gilbert authored
Further to the lsml thread titled: "does scsi_io_completion need to dump sense data for ata pass through (ck_cond = 1) ?" This is a patch to skip logging when the sense data is associated with a SENSE_KEY of "RECOVERED_ERROR" and the additional sense code is "ATA PASS-THROUGH INFORMATION AVAILABLE". This only occurs with the SAT ATA PASS-THROUGH commands when CK_COND=1 (in the cdb). It indicates that the sense data contains ATA registers. Smartmontools uses such commands on ATA disks connected via SAT. Periodic checks such as those done by smartd cause nuisance entries into logs that are: - neither errors nor warnings - pointless unless the cdb that caused them are also logged Signed-off-by:Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Dan Carpenter authored
The check on MAX_SCSI_TAR should be >= instead of > or we could go past the end of the array. Joe Eykholt aslo correctly points out that the check on MAX_LUN should be >= as well. That matches with how it is used in the rest of the file. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Jiri Slaby authored
Stanse found that c3cn is poked many times around in cxgb3i_conn_pdu_ready, there is no need to check if it is NULL. Remove the test. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Reviewed-by:
Karen Xie <kxie@chelsio.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
