1. 18 Jan, 2019 15 commits
    • Nir Dotan's avatar
      mlxsw: pci: Increase PCI SW reset timeout · d2f372ba
      Nir Dotan authored
      Spectrum-2 PHY layer introduces a calibration period which is a part of the
      Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for
      the firmware to come out of boot. This does not increase system boot time
      in cases where the firmware PHY calibration process is done quickly.
      
      Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
      Signed-off-by: default avatarNir Dotan <nird@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d2f372ba
    • Ido Schimmel's avatar
      mlxsw: pci: Ring CQ's doorbell before RDQ's · c9ebea04
      Ido Schimmel authored
      When a packet should be trapped to the CPU the device consumes a WQE
      (work queue element) from an RDQ (receive descriptor queue) and copies
      the packet to the address specified in the WQE. The device then tries to
      post a CQE (completion queue element) that contains various metadata
      (e.g., ingress port) about the packet to a CQ (completion queue).
      
      In case the device managed to consume a WQE, but did not manage to post
      the corresponding CQE, it will get stuck. This unlikely situation can be
      triggered due to the scheme the driver is currently using to process
      CQEs.
      
      The driver will consume up to 512 CQEs at a time and after processing
      each corresponding WQE it will ring the RDQ's doorbell, letting the
      device know that a new WQE was posted for it to consume. Only after
      processing all the CQEs (up to 512), the driver will ring the CQ's
      doorbell, letting the device know that new ones can be posted.
      
      Fix this by having the driver ring the CQ's doorbell for every processed
      CQE, but before ringing the RDQ's doorbell. This guarantees that
      whenever we post a new WQE, there is a corresponding CQE available. Copy
      the currently processed CQE to prevent the device from overwriting it
      with a new CQE after ringing the doorbell.
      
      Note that the driver still arms the CQ only after processing all the
      pending CQEs, so that interrupts for this CQ will only be delivered
      after the driver finished its processing.
      
      Before commit 8404f6f2 ("mlxsw: pci: Allow to use CQEs of version 1
      and version 2") the issue was virtually impossible to trigger since the
      number of CQEs was twice the number of WQEs and the number of CQEs
      processed at a time was equal to the number of available WQEs.
      
      Fixes: 8404f6f2 ("mlxsw: pci: Allow to use CQEs of version 1 and version 2")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reported-by: default avatarSemion Lisyansky <semionl@mellanox.com>
      Tested-by: default avatarSemion Lisyansky <semionl@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9ebea04
    • Felix Manlunas's avatar
      MAINTAINERS: update email addresses of liquidio driver maintainers · 20f5248a
      Felix Manlunas authored
      Update email addresses of liquidio driver maintainers.  Also remove a
      former maintainer.
      Signed-off-by: default avatarFelix Manlunas <fmanlunas@marvell.com>
      Acked-by: default avatarDerek Chickles <dchickles@marvell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      20f5248a
    • Jonathan Neuschäfer's avatar
      net: Fix typo in NET_FAILOVER help text · 9437b629
      Jonathan Neuschäfer authored
      "also enables" should not be spelled as one word.
      
      Fixes: cfc80d9a ("net: Introduce net_failover driver")
      Signed-off-by: default avatarJonathan Neuschäfer <j.neuschaefer@gmx.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9437b629
    • Ross Lagerwall's avatar
      net: Fix usage of pskb_trim_rcsum · 6c57f045
      Ross Lagerwall authored
      In certain cases, pskb_trim_rcsum() may change skb pointers.
      Reinitialize header pointers afterwards to avoid potential
      use-after-frees. Add a note in the documentation of
      pskb_trim_rcsum(). Found by KASAN.
      Signed-off-by: default avatarRoss Lagerwall <ross.lagerwall@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6c57f045
    • Thomas Petazzoni's avatar
      net: phy: mdio_bus: add missing device_del() in mdiobus_register() error handling · e40e2a2e
      Thomas Petazzoni authored
      The current code in __mdiobus_register() doesn't properly handle
      failures returned by the devm_gpiod_get_optional() call: it returns
      immediately, without unregistering the device that was added by the
      call to device_register() earlier in the function.
      
      This leaves a stale device, which then causes a NULL pointer
      dereference in the code that handles deferred probing:
      
      [    1.489982] Unable to handle kernel NULL pointer dereference at virtual address 00000074
      [    1.498110] pgd = (ptrval)
      [    1.500838] [00000074] *pgd=00000000
      [    1.504432] Internal error: Oops: 17 [#1] SMP ARM
      [    1.509133] Modules linked in:
      [    1.512192] CPU: 1 PID: 51 Comm: kworker/1:3 Not tainted 4.20.0-00039-g3b73a4cc8b3e-dirty #99
      [    1.520708] Hardware name: Xilinx Zynq Platform
      [    1.525261] Workqueue: events deferred_probe_work_func
      [    1.530403] PC is at klist_next+0x10/0xfc
      [    1.534403] LR is at device_for_each_child+0x40/0x94
      [    1.539361] pc : [<c0683fbc>]    lr : [<c0455d90>]    psr: 200e0013
      [    1.545628] sp : ceeefe68  ip : 00000001  fp : ffffe000
      [    1.550863] r10: 00000000  r9 : c0c66790  r8 : 00000000
      [    1.556079] r7 : c0457d44  r6 : 00000000  r5 : ceeefe8c  r4 : cfa2ec78
      [    1.562604] r3 : 00000064  r2 : c0457d44  r1 : ceeefe8c  r0 : 00000064
      [    1.569129] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
      [    1.576263] Control: 18c5387d  Table: 0ed7804a  DAC: 00000051
      [    1.582013] Process kworker/1:3 (pid: 51, stack limit = 0x(ptrval))
      [    1.588280] Stack: (0xceeefe68 to 0xceef0000)
      [    1.592630] fe60:                   cfa2ec78 c0c03c08 00000000 c0457d44 00000000 c0c66790
      [    1.600814] fe80: 00000000 c0455d90 ceeefeac 00000064 00000000 0d7a542e cee9d494 cfa2ec78
      [    1.608998] fea0: cfa2ec78 00000000 c0457d44 c0457d7c cee9d494 c0c03c08 00000000 c0455dac
      [    1.617182] fec0: cf98ba44 cf926a00 cee9d494 0d7a542e 00000000 cf935a10 cf935a10 cf935a10
      [    1.625366] fee0: c0c4e9b8 c0457d7c c0c4e80c 00000001 cf935a10 c0457df4 cf935a10 c0c4e99c
      [    1.633550] ff00: c0c4e99c c045a27c c0c4e9c4 ced63f80 cfde8a80 cfdebc00 00000000 c013893c
      [    1.641734] ff20: cfde8a80 cfde8a80 c07bd354 ced63f80 ced63f94 cfde8a80 00000008 c0c02d00
      [    1.649936] ff40: cfde8a98 cfde8a80 ffffe000 c0139a30 ffffe000 c0c6624a c07bd354 00000000
      [    1.658120] ff60: ffffe000 cee9e780 ceebfe00 00000000 ceeee000 ced63f80 c0139788 cf8cdea4
      [    1.666304] ff80: cee9e79c c013e598 00000001 ceebfe00 c013e44c 00000000 00000000 00000000
      [    1.674488] ffa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
      [    1.682671] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      [    1.690855] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
      [    1.699058] [<c0683fbc>] (klist_next) from [<c0455d90>] (device_for_each_child+0x40/0x94)
      [    1.707241] [<c0455d90>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88)
      [    1.716476] [<c0457d7c>] (device_reorder_to_tail) from [<c0455dac>] (device_for_each_child+0x5c/0x94)
      [    1.725692] [<c0455dac>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88)
      [    1.734927] [<c0457d7c>] (device_reorder_to_tail) from [<c0457df4>] (device_pm_move_to_tail+0x28/0x40)
      [    1.744235] [<c0457df4>] (device_pm_move_to_tail) from [<c045a27c>] (deferred_probe_work_func+0x58/0x8c)
      [    1.753746] [<c045a27c>] (deferred_probe_work_func) from [<c013893c>] (process_one_work+0x210/0x4fc)
      [    1.762888] [<c013893c>] (process_one_work) from [<c0139a30>] (worker_thread+0x2a8/0x5c0)
      [    1.771072] [<c0139a30>] (worker_thread) from [<c013e598>] (kthread+0x14c/0x154)
      [    1.778482] [<c013e598>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
      [    1.785689] Exception stack(0xceeeffb0 to 0xceeefff8)
      [    1.790739] ffa0:                                     00000000 00000000 00000000 00000000
      [    1.798923] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      [    1.807107] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
      [    1.813724] Code: e92d47f0 e1a05000 e8900048 e1a00003 (e5937010)
      [    1.819844] ---[ end trace 3c2c0c8b65399ec9 ]---
      
      The actual error that we had from devm_gpiod_get_optional() was
      -EPROBE_DEFER, due to the GPIO being provided by a driver that is
      probed later than the Ethernet controller driver.
      
      To fix this, we simply add the missing device_del() invocation in the
      error path.
      
      Fixes: 69226896 ("mdio_bus: Issue GPIO RESET to PHYs")
      Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@bootlin.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e40e2a2e
    • Otto Sabart's avatar
      doc: net: fix bad references to network drivers · 0e78f389
      Otto Sabart authored
      Fix "reference to nonexisting document" warnings.
      
      Fixes: b255e500 ("net: documentation: build a directory structure for drivers")
      Signed-off-by: default avatarOtto Sabart <ottosabart@seberm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e78f389
    • Yang Wei's avatar
      macvlan: replace kfree_skb by consume_skb for drop profiles · bf97403a
      Yang Wei authored
      Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch,
      perf) friendly.
      Signed-off-by: default avatarYang Wei <yang.wei9@zte.com.cn>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bf97403a
    • Yang Wei's avatar
      neighbour: Do not perturb drop profiles when neigh_probe · 87fff3ca
      Yang Wei authored
      Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch,
      perf) friendly.
      Signed-off-by: default avatarYang Wei <yang.wei9@zte.com.cn>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      87fff3ca
    • Lendacky, Thomas's avatar
      amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYs · 5ab3121b
      Lendacky, Thomas authored
      The XGBE hardware has support for performing MDIO operations using an
      MDIO command request. The driver mistakenly uses the mdio port address
      as the MDIO command request device address instead of the MDIO command
      request port address. Additionally, the driver does not properly check
      for and create a clause 45 MDIO command.
      
      Check the supplied MDIO register to determine if the request is a clause
      45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device
      address and register number from the supplied MDIO register and use them
      to set the MDIO command request device address and register number fields.
      For a clause 22 operation, the MDIO request device address is set to zero
      and the MDIO command request register number is set to the supplied MDIO
      register. In either case, the supplied MDIO port address is used as the
      MDIO command request port address.
      
      Fixes: 732f2ab7 ("amd-xgbe: Add support for MDIO attached PHYs")
      Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
      Tested-by: default avatarShyam Sundar S K <Shyam-sundar.S-k@amd.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5ab3121b
    • Camelia Groza's avatar
      net: phy: add missing phy driver features · 40f89ebf
      Camelia Groza authored
      The phy drivers for CS4340 and TN2020 are missing their
      features attributes. Add them.
      
      Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
      Reported-by: default avatarScott Wood <oss@buserror.net>
      Signed-off-by: default avatarCamelia Groza <camelia.groza@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      40f89ebf
    • Madalin Bucur's avatar
      dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start · c6ddfb9a
      Madalin Bucur authored
      As txq_trans_update() only updates trans_start when the lock is held,
      trans_start does not get updated if NETIF_F_LLTX is declared.
      Signed-off-by: default avatarMadalin Bucur <madalin.bucur@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c6ddfb9a
    • Yunjian Wang's avatar
      net: bridge: Fix ethernet header pointer before check skb forwardable · 28c1382f
      Yunjian Wang authored
      The skb header should be set to ethernet header before using
      is_skb_forwardable. Because the ethernet header length has been
      considered in is_skb_forwardable(including dev->hard_header_len
      length).
      
      To reproduce the issue:
      1, add 2 ports on linux bridge br using following commands:
      $ brctl addbr br
      $ brctl addif br eth0
      $ brctl addif br eth1
      2, the MTU of eth0 and eth1 is 1500
      3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4)
      from eth0 to eth1
      
      So the expect result is packet larger than 1500 cannot pass through
      eth0 and eth1. But currently, the packet passes through success, it
      means eth1's MTU limit doesn't take effect.
      
      Fixes: f6367b46 ("bridge: use is_skb_forwardable in forward path")
      Cc: bridge@lists.linux-foundation.org
      Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com>
      Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
      Cc: Stephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarYunjian Wang <wangyunjian@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      28c1382f
    • Jason Wang's avatar
      vhost: log dirty page correctly · cc5e7107
      Jason Wang authored
      Vhost dirty page logging API is designed to sync through GPA. But we
      try to log GIOVA when device IOTLB is enabled. This is wrong and may
      lead to missing data after migration.
      
      To solve this issue, when logging with device IOTLB enabled, we will:
      
      1) reuse the device IOTLB translation result of GIOVA->HVA mapping to
         get HVA, for writable descriptor, get HVA through iovec. For used
         ring update, translate its GIOVA to HVA
      2) traverse the GPA->HVA mapping to get the possible GPA and log
         through GPA. Pay attention this reverse mapping is not guaranteed
         to be unique, so we should log each possible GPA in this case.
      
      This fix the failure of scp to guest during migration. In -next, we
      will probably support passing GIOVA->GPA instead of GIOVA->HVA.
      
      Fixes: 6b1e6cc7 ("vhost: new device IOTLB API")
      Reported-by: default avatarJintack Lim <jintack@cs.columbia.edu>
      Cc: Jintack Lim <jintack@cs.columbia.edu>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cc5e7107
    • Jakub Kicinski's avatar
      Documentation: timestamping: correct path to net_tstamp.h · f655f8b8
      Jakub Kicinski authored
      net_tstamp.h is an UAPI header, so it was moved under include/uapi.
      Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f655f8b8
  2. 17 Jan, 2019 6 commits
  3. 16 Jan, 2019 19 commits
    • Willem de Bruijn's avatar
      udp: with udp_segment release on error path · 0f149c9f
      Willem de Bruijn authored
      Failure __ip_append_data triggers udp_flush_pending_frames, but these
      tests happen later. The skb must be freed directly.
      
      Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
      Reported-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0f149c9f
    • Taehee Yoo's avatar
      net: bpfilter: change section name of bpfilter UMH blob. · 1a935268
      Taehee Yoo authored
      The section of bpfilter UMH blob is the ".bpfilter_umh". but this is not
      an explicit section. so linking warning occurred at compile time for the
      powerpc.
      So, this patch makes use of the ".rodata" instead of the ".bpfilter_umh".
      
      Config condition:
      
      CONFIG_BPFILTER=y
      CONFIG_BPFILTER_UMH=y
      
      Result:
      
      ld: warning: orphan section `.bpfilter_umh' from
      `net/bpfilter/bpfilter_umh_blob.o' being placed in section `.bpfilter_umh'
      
      Fixes: 61fbf593 ("net: bpfilter: restart bpfilter_umh when error occurred")
      Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a935268
    • Andrew Lunn's avatar
      net: phy: Add missing features to PHY drivers · 9e857a40
      Andrew Lunn authored
      The bcm87xx and micrel driver has PHYs which are missing the .features
      value. Add them. The bcm87xx is a 10G FEC only PHY. Add the needed
      features definition of this PHY.
      
      Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
      Reported-by: default avatarScott Wood <oss@buserror.net>
      Reported-by: default avatarCamelia Groza <camelia.groza@nxp.com>
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e857a40
    • Jakub Kicinski's avatar
      ipv6: route: place a warning with duplicated string with correct extack · a5a82d84
      Jakub Kicinski authored
      "IPv6: " prefix is already added by pr_fmt, no need to include
      it again in the pr_warn() format.  The message predates extack
      support, we can replace the whole thing with an extack message.
      Suggested-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5a82d84
    • Davide Caratti's avatar
      selftests: tc-testing: fix parsing of ife type · 91fa038d
      Davide Caratti authored
      In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
      specifier for the ife type changed from 0x%X to %#llX, causing systematic
      failures in the following TDC test cases:
      
       7682 - Create valid ife encode action with mark and pass control
       ef47 - Create valid ife encode action with mark and pipe control
       df43 - Create valid ife encode action with mark and continue control
       e4cf - Create valid ife encode action with mark and drop control
       ccba - Create valid ife encode action with mark and reclassify control
       a1cf - Create valid ife encode action with mark and jump control
       cb3d - Create valid ife encode action with mark value at 32-bit maximum
       95ed - Create valid ife encode action with prio and pass control
       aa17 - Create valid ife encode action with prio and pipe control
       74c7 - Create valid ife encode action with prio and continue control
       7a97 - Create valid ife encode action with prio and drop control
       f66b - Create valid ife encode action with prio and reclassify control
       3056 - Create valid ife encode action with prio and jump control
       7dd3 - Create valid ife encode action with prio value at 32-bit maximum
       05bb - Create valid ife encode action with tcindex and pass control
       ce65 - Create valid ife encode action with tcindex and pipe control
       09cd - Create valid ife encode action with tcindex and continue control
       8eb5 - Create valid ife encode action with tcindex and continue control
       451a - Create valid ife encode action with tcindex and drop control
       d76c - Create valid ife encode action with tcindex and reclassify control
       e731 - Create valid ife encode action with tcindex and jump control
       b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
       2a9c - Create valid ife encode action with mac src parameter
       cf5c - Create valid ife encode action with mac dst parameter
       2353 - Create valid ife encode action with mac src and mac dst parameters
       552c - Create valid ife encode action with mark and type parameters
       0421 - Create valid ife encode action with prio and type parameters
       4017 - Create valid ife encode action with tcindex and type parameters
       fac3 - Create valid ife encode action with index at 32-bit maximnum
       7c25 - Create valid ife decode action with pass control
       dccb - Create valid ife decode action with pipe control
       7bb9 - Create valid ife decode action with continue control
       d9ad - Create valid ife decode action with drop control
       219f - Create valid ife decode action with reclassify control
       8f44 - Create valid ife decode action with jump control
       b330 - Create ife encode action with cookie
      
      Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
      to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
      both with old and new tc binaries.
      While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Acked-by: default avatarStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91fa038d
    • Konstantin Khlebnikov's avatar
      net/core/neighbour: fix kmemleak minimal reference count for hash tables · 01b833ab
      Konstantin Khlebnikov authored
      This should be 1 for normal allocations, 0 disables leak reporting.
      Signed-off-by: default avatarKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
      Reported-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Fixes: 85704cb8 ("net/core/neighbour: tell kmemleak about hash tables")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01b833ab
    • Xin Long's avatar
      sctp: allocate sctp_sockaddr_entry with kzalloc · 400b8b9a
      Xin Long authored
      The similar issue as fixed in Commit 4a2eb0c3 ("sctp: initialize
      sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event") also exists
      in sctp_inetaddr_event, as Alexander noticed.
      
      To fix it, allocate sctp_sockaddr_entry with kzalloc for both sctp
      ipv4 and ipv6 addresses, as does in sctp_v4/6_copy_addrlist().
      Reported-by: default avatarAlexander Potapenko <glider@google.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Reported-by: syzbot+ae0c70c0c2d40c51bb92@syzkaller.appspotmail.com
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      400b8b9a
    • Xin Long's avatar
      erspan: build the header with the right proto according to erspan_ver · 20704bd1
      Xin Long authored
      As said in draft-foschiano-erspan-03#section4:
      
         Different frame variants known as "ERSPAN Types" can be
         distinguished based on the GRE "Protocol Type" field value: Type I
         and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].
      
      So set it properly in erspan_xmit() according to erspan_ver. While at
      it, also remove the unused parameter 'proto' in erspan_fb_xmit().
      
      Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support")
      Reported-by: default avatarJianlin Shi <jishi@redhat.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      20704bd1
    • Ross Lagerwall's avatar
      openvswitch: Avoid OOB read when parsing flow nlattrs · 04a4af33
      Ross Lagerwall authored
      For nested and variable attributes, the expected length of an attribute
      is not known and marked by a negative number.  This results in an OOB
      read when the expected length is later used to check if the attribute is
      all zeros. Fix this by using the actual length of the attribute rather
      than the expected length.
      Signed-off-by: default avatarRoss Lagerwall <ross.lagerwall@citrix.com>
      Acked-by: default avatarPravin B Shelar <pshelar@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04a4af33
    • Dmitry Bezrukov's avatar
      net: usb: aqc111: Extend HWID table by TRENDnet device · 9098f21f
      Dmitry Bezrukov authored
      New device of TRENDnet based on aqc111u
      Add this ID to blacklist of cdc_ether driver as well
      Signed-off-by: default avatarDmitry Bezrukov <dmitry.bezrukov@aquantia.com>
      Signed-off-by: default avatarIgor Russkikh <igor.russkikh@aquantia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9098f21f
    • Cong Wang's avatar
      net_sched: refetch skb protocol for each filter · cd0c4e70
      Cong Wang authored
      Martin reported a set of filters don't work after changing
      from reclassify to continue. Looking into the code, it
      looks like skb protocol is not always fetched for each
      iteration of the filters. But, as demonstrated by Martin,
      TC actions could modify skb->protocol, for example act_vlan,
      this means we have to refetch skb protocol in each iteration,
      rather than using the one we fetch in the beginning of the loop.
      
      This bug is _not_ introduced by commit 3b3ae880
      ("net: sched: consolidate tc_classify{,_compat}"), technically,
      if act_vlan is the only action that modifies skb protocol, then
      it is commit c7e2b968 ("sched: introduce vlan action") which
      introduced this bug.
      Reported-by: default avatarMartin Olsson <martin.olsson+netdev@sentorsecurity.com>
      Cc: Jamal Hadi Salim <jhs@mojatatu.com>
      Cc: Jiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd0c4e70
    • Timotej Lazar's avatar
      net: phy: meson-gxl: Use the genphy_soft_reset callback · f2f98c1d
      Timotej Lazar authored
      Since the referenced commit, Ethernet fails to come up at boot on the
      board meson-gxl-s905x-libretech-cc. Fix this by re-enabling the
      genphy_soft_reset callback for the Amlogic Meson GXL PHY driver.
      
      Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
      Signed-off-by: default avatarTimotej Lazar <timotej.lazar@araneo.si>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f2f98c1d
    • yupeng's avatar
      net: add document for several snmp counters · a6c7c7aa
      yupeng authored
      add document for below counters:
      TcpEstabResets
      TcpAttemptFails
      TcpOutRsts
      TcpExtTCPSACKDiscard
      TcpExtTCPDSACKIgnoredOld
      TcpExtTCPDSACKIgnoredNoUndo
      TcpExtTCPSackShifted
      TcpExtTCPSackMerged
      TcpExtTCPSackShiftFallback
      TcpExtTCPWantZeroWindowAdv
      TcpExtTCPToZeroWindowAdv
      TcpExtTCPFromZeroWindowAdv
      TcpExtDelayedACKs
      TcpExtDelayedACKLocked
      TcpExtDelayedACKLost
      TcpExtTCPLossProbes
      TcpExtTCPLossProbeRecovery
      Signed-off-by: default avataryupeng <yupeng0921@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a6c7c7aa
    • Eric Dumazet's avatar
      fou, fou6: do not assume linear skbs · 26fc181e
      Eric Dumazet authored
      Both gue_err() and gue6_err() incorrectly assume
      linear skbs. Fix them to use pskb_may_pull().
      
      BUG: KMSAN: uninit-value in gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
      CPU: 0 PID: 18083 Comm: syz-executor1 Not tainted 5.0.0-rc1+ #7
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       <IRQ>
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x173/0x1d0 lib/dump_stack.c:113
       kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
       __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
       gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
       __udp6_lib_err_encap_no_sk net/ipv6/udp.c:434 [inline]
       __udp6_lib_err_encap net/ipv6/udp.c:491 [inline]
       __udp6_lib_err+0x18d0/0x2590 net/ipv6/udp.c:522
       udplitev6_err+0x118/0x130 net/ipv6/udplite.c:27
       icmpv6_notify+0x462/0x9f0 net/ipv6/icmp.c:784
       icmpv6_rcv+0x18ac/0x3fa0 net/ipv6/icmp.c:872
       ip6_protocol_deliver_rcu+0xb5a/0x23a0 net/ipv6/ip6_input.c:394
       ip6_input_finish net/ipv6/ip6_input.c:434 [inline]
       NF_HOOK include/linux/netfilter.h:289 [inline]
       ip6_input+0x2b6/0x350 net/ipv6/ip6_input.c:443
       dst_input include/net/dst.h:450 [inline]
       ip6_rcv_finish+0x4e7/0x6d0 net/ipv6/ip6_input.c:76
       NF_HOOK include/linux/netfilter.h:289 [inline]
       ipv6_rcv+0x34b/0x3f0 net/ipv6/ip6_input.c:272
       __netif_receive_skb_one_core net/core/dev.c:4973 [inline]
       __netif_receive_skb net/core/dev.c:5083 [inline]
       process_backlog+0x756/0x10e0 net/core/dev.c:5923
       napi_poll net/core/dev.c:6346 [inline]
       net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
       __do_softirq+0x53f/0x93a kernel/softirq.c:293
       do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1039
       </IRQ>
       do_softirq kernel/softirq.c:338 [inline]
       __local_bh_enable_ip+0x16f/0x1a0 kernel/softirq.c:190
       local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
       rcu_read_unlock_bh include/linux/rcupdate.h:696 [inline]
       ip6_finish_output2+0x1d64/0x25f0 net/ipv6/ip6_output.c:121
       ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
       NF_HOOK_COND include/linux/netfilter.h:278 [inline]
       ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
       dst_output include/net/dst.h:444 [inline]
       ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
       ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
       udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
       udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
       inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
       sock_sendmsg_nosec net/socket.c:621 [inline]
       sock_sendmsg net/socket.c:631 [inline]
       ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
       __sys_sendmmsg+0x580/0xad0 net/socket.c:2211
       __do_sys_sendmmsg net/socket.c:2240 [inline]
       __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
       __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
       do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
       entry_SYSCALL_64_after_hwframe+0x63/0xe7
      RIP: 0033:0x457ec9
      Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f4a5204fc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
      RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000457ec9
      RDX: 00000000040001ab RSI: 0000000020000240 RDI: 0000000000000003
      RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4a520506d4
      R13: 00000000004c4ce5 R14: 00000000004d85d8 R15: 00000000ffffffff
      
      Uninit was created at:
       kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
       kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
       kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
       kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
       slab_post_alloc_hook mm/slab.h:446 [inline]
       slab_alloc_node mm/slub.c:2754 [inline]
       __kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4377
       __kmalloc_reserve net/core/skbuff.c:140 [inline]
       __alloc_skb+0x309/0xa20 net/core/skbuff.c:208
       alloc_skb include/linux/skbuff.h:1012 [inline]
       alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5288
       sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
       sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
       __ip6_append_data+0x42ed/0x5dc0 net/ipv6/ip6_output.c:1443
       ip6_append_data+0x3c2/0x650 net/ipv6/ip6_output.c:1619
       icmp6_send+0x2f5c/0x3c40 net/ipv6/icmp.c:574
       icmpv6_send+0xe5/0x110 net/ipv6/ip6_icmp.c:43
       ip6_link_failure+0x5c/0x2c0 net/ipv6/route.c:2231
       dst_link_failure include/net/dst.h:427 [inline]
       vti_xmit net/ipv4/ip_vti.c:229 [inline]
       vti_tunnel_xmit+0xf3b/0x1ea0 net/ipv4/ip_vti.c:265
       __netdev_start_xmit include/linux/netdevice.h:4382 [inline]
       netdev_start_xmit include/linux/netdevice.h:4391 [inline]
       xmit_one net/core/dev.c:3278 [inline]
       dev_hard_start_xmit+0x604/0xc40 net/core/dev.c:3294
       __dev_queue_xmit+0x2e48/0x3b80 net/core/dev.c:3864
       dev_queue_xmit+0x4b/0x60 net/core/dev.c:3897
       neigh_direct_output+0x42/0x50 net/core/neighbour.c:1511
       neigh_output include/net/neighbour.h:508 [inline]
       ip6_finish_output2+0x1d4e/0x25f0 net/ipv6/ip6_output.c:120
       ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
       NF_HOOK_COND include/linux/netfilter.h:278 [inline]
       ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
       dst_output include/net/dst.h:444 [inline]
       ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
       ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
       udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
       udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
       inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
       sock_sendmsg_nosec net/socket.c:621 [inline]
       sock_sendmsg net/socket.c:631 [inline]
       ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
       __sys_sendmmsg+0x580/0xad0 net/socket.c:2211
       __do_sys_sendmmsg net/socket.c:2240 [inline]
       __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
       __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
       do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
       entry_SYSCALL_64_after_hwframe+0x63/0xe7
      
      Fixes: b8a51b38 ("fou, fou6: ICMP error handlers for FoU and GUE")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Cc: Stefano Brivio <sbrivio@redhat.com>
      Cc: Sabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26fc181e
    • Davide Caratti's avatar
      selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified · 5216bd77
      Davide Caratti authored
      After commit 1c25324c ("net/sched: act_tunnel_key: Don't dump dst port
      if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
      port, unless it was explicitly configured. This caused systematic failures
      in the following TDC test case:
      
       7a88 - Add tunnel_key action with cookie parameter
      
      Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
      pass again.
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5216bd77
    • Davide Caratti's avatar
      selftests: tc-testing: drop test on missing tunnel key id · e4136155
      Davide Caratti authored
      After merge of commit 80ef0f22 ("net/sched: act_tunnel_key: Allow
      key-less tunnels"), act_tunnel_key does not reject anymore requests to
      install 'set' rules where the key id is missing. Therefore, drop the
      following TDC testcase:
      
       ba4e - Add tunnel_key set action with missing mandatory id parameter
      
      because it's going to become a systematic fail as soon as userspace
      iproute2 will start supporting key-less tunnels.
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4136155
    • Andrew Lunn's avatar
      net: phy: marvell: Fix deadlock from wrong locking · e0a7328f
      Andrew Lunn authored
      m88e1318_set_wol() takes the lock as part of phy_select_page(). Don't
      take the lock again with phy_read(), use the unlocked __phy_read().
      
      Fixes: 424ca4c5 ("net: phy: marvell: fix paged access races")
      Reported-by: default avatarÅke Rehnman <ake.rehnman@gmail.com>
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0a7328f
    • Andrew Lunn's avatar
      net: phy: marvell: Errata for mv88e6390 internal PHYs · 8cbcdc1a
      Andrew Lunn authored
      The VOD can be out of spec, unless some magic value is poked into an
      undocumented register in an undocumented page.
      
      Fixes: e4cf8a38 ("net: phy: Marvell: Add mv88e6390 internal PHY")
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8cbcdc1a
    • Greg Kroah-Hartman's avatar
      IN_BADCLASS: fix macro to actually work · f275ee0f
      Greg Kroah-Hartman authored
      Commit 65cab850 ("net: Allow class-e address assignment via ifconfig
      ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
      many '(' characters were added to the line, making any code that used
      it, not build properly.
      
      Also, the macro now compares an unsigned with a signed value, which
      isn't ok, so fix that up by making both types match properly.
      Reported-by: default avatarChristopher Ferris <cferris@google.com>
      Fixes: 65cab850 ("net: Allow class-e address assignment via ifconfig ioctl")
      Cc: Dave Taht <dave.taht@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f275ee0f