- 08 Mar, 2012 10 commits
-
-
Haiyang Zhang authored
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Siewior authored
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: AnÃbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paulius Zaleckas authored
Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paulius Zaleckas authored
When br_log_state() is reporting state it should say "entered" istead of "entering" since state at this point is already changed. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit 239c562c (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Mar, 2012 17 commits
-
-
Jesse Gross authored
When modifying IP addresses or ports on a UDP packet we don't correctly follow the rules for unchecksummed packets. This meant that packets without a checksum can be given a incorrect new checksum and packets with a checksum can become marked as being unchecksummed. This fixes it to handle those requirements. Signed-off-by: Jesse Gross <jesse@nicira.com>
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM updates from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7358/1: perf: add PMU hotplug notifier ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode ARM: ecard: ensure fake vma vm_flags is setup ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection ARM: 7345/1: errata: update workaround for A9 erratum #743622 ARM: 7348/1: arm/spear600: fix one-shot timer ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "Just a few driver fixups, nothing exciting." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use Input: twl4030-vibra - use proper guard for PM methods Input: evdev - fix variable initialisation Input: wacom - add missing LEDS_CLASS to Kconfig Input: ALPS - fix touchpad detection when buttons are pressed
-
Linus Torvalds authored
This reverts commit 8f2f748b. It causes some odd regression that we have not figured out, and it's too late in the -rc series to try to figure it out now. As reported by Konstantin Khlebnikov, it causes consistent hangs on his laptop (Thinkpad x220: 2x cores + HT). They can be avoided by adding calls to "rebuild_sched_domains();" in cpuset_cpu_[in]active() for the CPU_{ONLINE/DOWN_FAILED/DOWN_PREPARE}_FROZEN cases, but it's not at all clear why, and it makes no sense. Konstantin's config doesn't even have CONFIG_CPUSETS enabled, just to make things even more interesting. So it's not the cpusets, it's just the scheduling domains. So until this is understood, revert. Bisected-reported-and-tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Lorenzo Pieralisi authored
When a CPU is taken out of reset, either cold booted or hotplugged in, some of its PMU registers can contain UNKNOWN values. This patch adds a hotplug notifier to ARM core perf code so that upon CPU restart the PMU unit is reset and becomes ready to use again. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
xscale2 PMUs indicate overflow not via the PMU control register, but by a separate overflow FLAG register instead. This patch fixes the xscale2 PMU code to use this register to detect to overflow and ensures that we clear any pending overflow when disabling a counter. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
The PMU IRQ handlers in perf assume that if a counter has overflowed then perf must be responsible. In the paranoid world of crazy hardware, this could be false, so check that we do have a valid event before attempting to dereference NULL in the interrupt path. Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
When disabling a counter on an ARMv7 PMU, we should also clear the overflow flag in case an overflow occurred whilst stopping the counter. This prevents a spurious overflow being picked up later and leading to either false accounting or a NULL dereference. Cc: <stable@vger.kernel.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
On ARM, the PMU does not stop counting after an overflow and therefore IRQ latency affects the new counter value read by the kernel. This is significant for non-sampling runs where it is possible for the new value to overtake the previous one, causing the delta to be out by up to max_period events. Commit a737823d ("ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency") attempted to fix this problem by allowing interrupt handlers to pass an overflow flag to the event update function, causing the overflow calculation to assume that the counter passed through zero when going from prev to new. Unfortunately, this doesn't work when overflow occurs on the perf_task_tick path because we have the flag cleared and end up computing a large negative delta. This patch removes the overflow flag from armpmu_event_update and instead limits the sample_period to half of the max_period for non-sampling profiling runs. Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Jason Gerecke authored
The message count field uses three bits of storage, not two. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) TCP can chop up SACK'd SKBs below below the unacked send sequence and that breaks lots of stuff. Fix from Neal Cardwell. 2) There is code in ipv6 to properly join and leave the all-routers multicast code when the forwarding setting is changed, but once forwarding is turned on, we don't do the join for newly registered devices. Fix from Li Wei. 3) Netfilter's NAT module autoload in ctnetlink drops a spinlock around a sleeping call, problem is this code path doesn't actually hold that lock. Fix from Pablo Neira Ayuso. 4) TG3 uses the wrong interfaces to hook into the new byte queue limit support. It uses the device level interfaces, which is fine for single queue devices, but on more recent chips this driver supports multiqueue so we have to use the multiqueue BQL APIs. Fix from Tom Herbert. 5) r8169 resume fix from Francois Romieu. 6) Add some cxgb4 device IDs, from Vipul Pandya. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: IPv6: Fix not join all-router mcast group when forwarding set. caif-hsi: Set default MTU to 4096 cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adapters cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adapters mlx4_core: remove buggy sched_queue masking netfilter: nf_conntrack: fix early_drop with reliable event delivery bridge: netfilter: don't call iptables on vlan packets if sysctl is off netfilter: bridge: fix wrong pointer dereference netfilter: ctnetlink: remove incorrect spin_[un]lock_bh on NAT module autoload netfilter: ebtables: fix wrong name length while copying to user-space r8169: runtime resume before shutdown. tcp: fix tcp_shift_skb_data() to not shift SACKed data below snd_una tg3: Fix to use multi queue BQL interfaces
-
Linus Torvalds authored
It turns out that test-compiling this file on x86-64 doesn't really help, because much of it is x86-32-specific. And so I hadn't noticed the slightly over-eager removal of the 'r' from 'addr' variable despite thinking I had tested it. Signed-off-by: Linus "oopsie" Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Several users of "find_vma_prev()" were not in fact interested in the previous vma if there was no primary vma to be found either. And in those cases, we're much better off just using the regular "find_vma()", and then "prev" can be looked up by just checking vma->vm_prev. The find_vma_prev() semantics are fairly subtle (see Mikulas' recent commit 83cd904d: "mm: fix find_vma_prev"), and the whole "return prev by reference" means that it generates worse code too. Thus this "let's avoid using this inconvenient and clearly too subtle interface when we don't really have to" patch. Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French * git://git.samba.org/sfrench/cifs-2.6: cifs: fix dentry refcount leak when opening a FIFO on lookup CIFS: Fix mkdir/rmdir bug for the non-POSIX case
-
Mikulas Patocka authored
Commit 6bd4837d ("mm: simplify find_vma_prev()") broke memory management on PA-RISC. After application of the patch, programs that allocate big arrays on the stack crash with segfault, for example, this will crash if compiled without optimization: int main() { char array[200000]; array[199999] = 0; return 0; } The reason is that PA-RISC has up-growing stack and the stack is usually the last memory area. In the above example, a page fault happens above the stack. Previously, if we passed too high address to find_vma_prev, it returned NULL and stored the last VMA in *pprev. After "simplify find_vma_prev" change, it stores NULL in *pprev. Consequently, the stack area is not found and it is not expanded, as it used to be before the change. This patch restores the old behavior and makes it return the last VMA in *pprev if the requested address is higher than address of any other VMA. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
Xommit ac563761(genirq: Unmask oneshot irqs when thread was not woken) fails to unmask when a !IRQ_ONESHOT threaded handler is handled by handle_level_irq. This happens because thread_mask is or'ed unconditionally in irq_wake_thread(), but for !IRQ_ONESHOT interrupts never cleared. So the check for !desc->thread_active fails and keeps the interrupt disabled. Keep the thread_mask zero for !IRQ_ONESHOT interrupts. Document the thread_mask magic while at it. Reported-and-tested-by: Sven Joachim <svenjoac@gmx.de> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 06 Mar, 2012 13 commits
-
-
Ben Pfaff authored
When OVS_VPORT_ATTR_NAME is specified and dp_ifindex is nonzero, the logical behavior would be for the vport name lookup scope to be limited to the specified datapath, but in fact the dp_ifindex value was ignored. This commit causes the search scope to be honored. Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
-
Li Wei authored
When forwarding was set and a new net device is register, we need add this device to the all-router mcast group. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hugh Dickins authored
Currently error is -ENOMEM when rejecting VM_GROWSDOWN|VM_GROWSUP from shared anonymous: hoist the file case's -EINVAL up for both. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sjur Brændeland authored
Default MTU for CAIF HSI was wrongly set to 15 * 4092 bytes. The patch sets default MTU size to 4096. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yevgeny Petrilin authored
Fixes a bug introduced by commit fe9a2603, where the priority bits in the schedule queue field were masked out. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
If reliable event delivery is enabled and ctnetlink fails to deliver the destroy event in early_drop, the conntrack subsystem cannot drop any the candidate flow that was planned to be evicted. Reported-by: Kerin Millar <kerframil@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
When net.bridge.bridge-nf-filter-vlan-tagged is 0 (default), vlan packets arriving should not be sent to ip(6)tables by bridge netfilter. However, it turns out that we currently always send VLAN packets to netfilter, if .. a), CONFIG_VLAN_8021Q is enabled ; or b), CONFIG_VLAN_8021Q is not set but rx vlan offload is enabled on the bridge port. This is because bridge netfilter treats skb with skb->protocol == ETH_P_IP{V6} as "non-vlan packet". With rx vlan offload on or CONFIG_VLAN_8021Q=y, the vlan header has already been removed here, and we cannot rely on skb->protocol alone. Fix this by only using skb->protocol if the skb has no vlan tag, or if a vlan tag is present and filter-vlan-tagged bridge netfilter sysctl is enabled. We cannot remove the skb->protocol == htons(ETH_P_8021Q) test because the vlan tag is still around in the CONFIG_VLAN_8021Q=n && "ethtool -K $itf rxvlan off" case. reproducer: iptables -t raw -I PREROUTING -i br0 iptables -t raw -I PREROUTING -i br0.1 Then send packets to an ip address configured on br0.1 interface. Even with net.bridge.bridge-nf-filter-vlan-tagged=0, the 1st rule will match instead of the 2nd one. With this patch applied, the 2nd rule will match instead. In the non-local address case, netfilter won't be consulted after this patch unless the sysctl is switched on. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
In adf7ff8, a invalid dereference was added in ebt_make_names. CC [M] net/bridge/netfilter/ebtables.o net/bridge/netfilter/ebtables.c: In function `ebt_make_names': net/bridge/netfilter/ebtables.c:1371:20: warning: `t' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
Since 7d367e06, ctnetlink_new_conntrack is called without holding the nf_conntrack_lock spinlock. Thus, ctnetlink_parse_nat_setup does not require to release that spinlock anymore in the NAT module autoload case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Santosh Nayak authored
user-space ebtables expects 32 bytes-long names, but xt_match names use 29 bytes. We have to copy less 29 bytes and then, make sure we fill the remaining bytes with zeroes. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. As the device was programmed by .runtime_suspend() to wake on link changes, it is thus brought back up as soon as the link recovers. Resuming every suspended device through the driver core would slow things down and it is not clear how many devices really need it now. Original report and D0 transition patch by Sameer Nanda. Patch has been changed to comply with advices by Rafael J. Wysocki and the PM folks. Reported-by: Sameer Nanda <snanda@chromium.org> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Hayes Wang <hayeswang@realtek.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-