- 29 Jan, 2020 29 commits
-
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit d60229d8 upstream. The return from pnp_irq is an unsigned integer type resource_size_t and hence the error check for a positive non-error code is always going to be true. A check for a non-failure return from pnp_irq should in fact be for (resource_size_t)-1 rather than >= 0. Addresses-Coverity: ("Unsigned compared against 0") Fixes: a9824c86 ("[ALSA] Add CS4232 PnP BIOS support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 256efaea upstream. gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit b2c0fcd2 upstream. These were added to blkdev_ioctl() in linux-5.5 but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.4+ Fixes: bbd3e064 ("block: add an API for Persistent Reservations") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 53a256a9 upstream. dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 27242021 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.deSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Amir Goldstein authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 98ca480a upstream. An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit bbcc5672 upstream. Declaring __current_thread_info as a global register variable has the effect of preventing GCC from saving & restoring its value in cases where the ABI would typically do so. To quote GCC documentation: > If the register is a call-saved register, call ABI is affected: the > register will not be restored in function epilogue sequences after the > variable has been assigned. Therefore, functions cannot safely return > to callers that assume standard ABI. When our position independent VDSO is built for the n32 or n64 ABIs all functions it exposes should be preserving the value of $gp/$28 for their caller, but in the presence of the __current_thread_info global register variable GCC stops doing so & simply clobbers $gp/$28 when calculating the address of the GOT. In cases where the VDSO returns success this problem will typically be masked by the caller in libc returning & restoring $gp/$28 itself, but that is by no means guaranteed. In cases where the VDSO returns an error libc will typically contain a fallback path which will now fail (typically with a bad memory access) if it attempts anything which relies upon the value of $gp/$28 - eg. accessing anything via the GOT. One fix for this would be to move the declaration of __current_thread_info inside the current_thread_info() function, demoting it from global register variable to local register variable & avoiding inadvertently creating a non-standard calling ABI for the VDSO. Unfortunately this causes issues for clang, which doesn't support local register variables as pointed out by commit fe92da0f ("MIPS: Changed current_thread_info() to an equivalent supported by both clang and GCC") which introduced the global register variable before we had a VDSO to worry about. Instead, fix this by continuing to use the global register variable for the kernel proper but declare __current_thread_info as a simple extern variable when building the VDSO. It should never be referenced, and will cause a link error if it is. This resolves the calling convention issue for the VDSO without having any impact upon the build of the kernel itself for either clang or gcc. Signed-off-by:
Paul Burton <paulburton@kernel.org> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Reported-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 0aec96f5 upstream. Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724 driver with Infrasonic Quartet support code: namely, ice->set_rate callback gets called inside ice->reg_lock spinlock, while the callback in quartet.c holds ice->gpio_mutex. This patch fixes the invalid call: it simply moves the calls of ice->set_rate and ice->set_mclk callbacks outside the spinlock. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.deSigned-off-by:
-
Christian Brauner authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 0b8d616f ] When assiging and testing taskstats in taskstats_exit() there's a race when setting up and reading sig->stats when a thread-group with more than one thread exits: write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0: taskstats_tgid_alloc kernel/taskstats.c:567 [inline] taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 get_signal+0x2a2/0x1320 kernel/signal.c:2734 do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1: taskstats_tgid_alloc kernel/taskstats.c:559 [inline] taskstats_exit+0xb2/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 __do_sys_exit_group kernel/exit.c:994 [inline] __se_sys_exit_group kernel/exit.c:992 [inline] __x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using smp_load_acquire() and smp_store_release(). Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com Fixes: 34ec1234 ("taskstats: cleanup ->signal->stats allocation") Cc: stable@vger.kernel.org Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Marco Elver <elver@google.com> Reviewed-by:
Will Deacon <will@kernel.org> Reviewed-by:
Andrea Parri <parri.andrea@gmail.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Brian Foster authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 798a9cad ] syzbot (via KASAN) reports a use-after-free in the error path of xlog_alloc_log(). Specifically, the iclog freeing loop doesn't handle the case of a fully initialized ->l_iclog linked list. Instead, it assumes that the list is partially constructed and NULL terminated. This bug manifested because there was no possible error scenario after iclog list setup when the original code was added. Subsequent code and associated error conditions were added some time later, while the original error handling code was never updated. Fix up the error loop to terminate either on a NULL iclog or reaching the end of the list. Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit c673ec61 ] When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined reserve_additional_memory() will set balloon_stats.target_pages to a wrong value in case there are still some ballooned pages allocated via alloc_xenballooned_pages(). This will result in balloon_process() no longer be triggered when ballooned pages are freed in batches. Reported-by:
Nicholas Tsirakis <niko.tsirakis@gmail.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 0539ad0b ] The s390 CPU Measurement sampling facility has an overflow condition which fires when all entries in a SBD are used. The measurement alert interrupt is triggered and reads out all samples in this SDB. It then tests the successor SDB, if this SBD is not full, the interrupt handler does not read any samples at all from this SDB The design waits for the hardware to fill this SBD and then trigger another meassurement alert interrupt. This scheme works nicely until an perf_event_overflow() function call discards the sample due to a too high sampling rate. The interrupt handler has logic to read out a partially filled SDB when the perf event overflow condition in linux common code is met. This causes the CPUM sampling measurement hardware and the PMU device driver to operate on the same SBD's trailer entry. This should not happen. This can be seen here using this trace: cpumsf_pmu_add: tear:0xb5286000 hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 1. interrupt hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 2. interrupt ... this goes on fine until... hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0 perf_push_sample1: overflow one or more samples read from the IRQ handler are rejected by perf_event_overflow() and the IRQ handler advances to the next SDB and modifies the trailer entry of a partially filled SDB. hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1 timestamp: 14:32:52.519953 Next time the IRQ handler is called for this SDB the trailer entry shows an overflow count of 19 missed entries. hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1 timestamp: 14:32:52.970058 Remove access to a follow on SDB when event overflow happened. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 39d4a501 ] Function perf_event_ever_overflow() and perf_event_account_interrupt() are called every time samples are processed by the interrupt handler. However function perf_event_account_interrupt() has checks to avoid being flooded with interrupts (more then 1000 samples are received per task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is added to the perf data. The perf subsystem limit calculation is: maximum sample frequency := 100000 --> 1 samples per 10 us task_tick = 10ms = 10000us --> 1000 samples per task_tick The work flow is measurement_alert() uses SDBT head and each SBDT points to 511 SDB pages, each with 126 sample entries. After processing 8 SBDs and for each valid sample calling: perf_event_overflow() perf_event_account_interrupts() there is a considerable amount of samples being dropped, especially when the sample frequency is very high and near the 100000 limit. To avoid the high amount of samples being dropped near the end of a task_tick time frame, increment the sampling interval in case of dropped events. The CPU Measurement sampling facility on the s390 supports only intervals, specifiing how many CPU cycles have to be executed before a sample is generated. Increase the interval when the samples being generated hit the task_tick limit. Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 028288df ] In raid1_sync_request func, rdev should be checked before reference. Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
EJ Hsu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit e5b5da96 ] Gadget driver should always use config_ep_by_speed() to initialize usb_ep struct according to usb device's operating speed. Otherwise, usb_ep struct may be wrong if usb devcie's operating speed is changed. The key point in this patch is that we want to make sure the desc pointer in usb_ep struct will be set to NULL when gadget is disconnected. This will force it to call config_ep_by_speed() to correctly initialize usb_ep struct based on the new operating speed when gadget is re-connected later. Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
EJ Hsu <ejh@nvidia.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Jason Yan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit f70267f3 ] The discovering of sas port is driven by workqueue in libsas. When libsas is processing port events or phy events in workqueue, new events may rise up and change the state of some structures such as asd_sas_phy. This may cause some problems such as follows: ==>thread 1 ==>thread 2 ==>phy up ==>phy_up_v3_hw() ==>oob_mode = SATA_OOB_MODE; ==>phy down quickly ==>hisi_sas_phy_down() ==>sas_ha->notify_phy_event() ==>sas_phy_disconnected() ==>oob_mode = OOB_NOT_CONNECTED ==>workqueue wakeup ==>sas_form_port() ==>sas_discover_domain() ==>sas_get_port_device() ==>oob_mode is OOB_NOT_CONNECTED and device is wrongly taken as expander This at last lead to the panic when libsas trying to issue a command to discover the device. [183047.614035] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [183047.622896] Mem abort info: [183047.625762] ESR = 0x96000004 [183047.628893] Exception class = DABT (current EL), IL = 32 bits [183047.634888] SET = 0, FnV = 0 [183047.638015] EA = 0, S1PTW = 0 [183047.641232] Data abort info: [183047.644189] ISV = 0, ISS = 0x00000004 [183047.648100] CM = 0, WnR = 0 [183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000b7df67be [183047.657834] [0000000000000058] pgd=0000000000000000 [183047.662789] Internal error: Oops: 96000004 [#1] SMP [183047.667740] Process kworker/u16:2 (pid: 31291, stack limit = 0x00000000417c4974) [183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1 [183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10, BIOS 0.15 10/22/2019 [183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO) [183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw] [183047.717153] sp : ffff00000f28ba60 [183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228 [183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200 [183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0 [183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228 [183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200 [183047.747464] x19: 0000000000f80800 x18: 0000000000000010 [183047.752848] x17: 0000000000000000 x16: 0000000000000000 [183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005 [183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20 [183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870 [183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0 [183047.779770] x7 : 0000000000000000 x6 : 000000000000003f [183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0 [183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007 [183047.795922] x1 : 0000000000000008 x0 : 0000000000000000 [183047.801307] Call trace: [183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main] [183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main] [183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] [183047.826757] smp_execute_task_sg+0xec/0x218 [183047.831013] smp_execute_task+0x74/0xa0 [183047.834921] sas_discover_expander.part.7+0x9c/0x5f8 [183047.839959] sas_discover_root_expander+0x90/0x160 [183047.844822] sas_discover_domain+0x1b8/0x1e8 [183047.849164] process_one_work+0x1b4/0x3f8 [183047.853246] worker_thread+0x54/0x470 [183047.856981] kthread+0x134/0x138 [183047.860283] ret_from_fork+0x10/0x18 [183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800) [183047.870097] kernel fault(0x1) notification starting on CPU 0 [183047.875828] kernel fault(0x1) notification finished on CPU 0 [183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE) hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE) [183047.892418] ---[ end trace 4cc26083fc11b783 ]--- [183047.897107] Kernel panic - not syncing: Fatal exception [183047.902403] kernel fault(0x5) notification starting on CPU 0 [183047.908134] kernel fault(0x5) notification finished on CPU 0 [183047.913865] SMP: stopping secondary CPUs [183047.917861] Kernel Offset: disabled [183047.921422] CPU features: 0x2,a2a00a38 [183047.925243] Memory Limit: none [183047.928372] kernel reboot(0x2) notification starting on CPU 0 [183047.934190] kernel reboot(0x2) notification finished on CPU 0 [183047.940008] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.comReported-by:
Gao Chuan <gaochuan4@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit fee92f25 ] On this error path we call qla4xxx_mem_free() and then the caller also calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a couple double frees: drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed Fixes: afaf5a2d ("[SCSI] Initial Commit of qla4xxx") Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountainSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Roman Bolshakov authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 2c2f4bed ] MBA_PORT_UPDATE generates duplicate log lines in target mode because qlt_async_event is called twice. Drop the calls within the case as the function will be called right after the switch statement. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.comAcked-by:
Himanshu Madhani <hmadhani@marvel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Bo Wu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 9a1b0b9a ] When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf, dd_data should be freed before return SLI_CONFIG_HANDLED. When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in job_error tag. Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.comSigned-off-by:
Bo Wu <wubo40@huawei.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 44a7b675 ] The driver forgets to call unregister_pernet_subsys() in the error path of cma_init(). Add the missed call to fix it. Fixes: 4be74b42 ("IB/cma: Separate port allocation to network namespaces") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.comSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Leonard Crestez authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 42a6b25e ] Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Ioanna Alifieraki authored
BugLink: https://bugs.launchpad.net/bugs/1851243 This commit breaks r/w access to files. Since fixing it requires many commits to be backported revert it to avoid risk of regressions. For detailed description please look at LP #1851243. This reverts commit c8838e8e. Signed-off-by:
Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1853375 The packet fanout test generates UDP traffic and reads this with a pair of packet sockets, testing the various fanout algorithms. Avoid non-determinism from reading unrelated background traffic. Fanout decisions are made before unrelated packets can be dropped with a filter, so that is an insufficient strategy [*]. Run the packet socket tests in a network namespace, similar to msg_zerocopy. It it still good practice to install a filter on a packet socket before accepting traffic. Because this is example code, demonstrate that pattern. Open the socket initially bound to no protocol, install a filter, and only then bind to ETH_P_IP. Another source of non-determinism is hash collisions in FANOUT_HASH. The hash function used to select a socket in the fanout group includes the pseudorandom number hashrnd, which is not visible from userspace. To work around this, the test tries to find a pair of UDP source ports that do not collide. It gives up too soon (5 times, every 32 runs) and output is confusing. Increase tries to 20 and revise the error msg. [*] another approach would be to add a third socket to the fanout group and direct all unexpected traffic here. This is possible only when reimplementing methods like RR or HASH alongside this extra catch-all bucket, using the BPF fanout method. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (backported from commit cc30c93f) [PHLin: backported as some variables haven't been changed yet] Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
Mike Maloney authored
BugLink: https://bugs.launchpad.net/bugs/1853375 sock_fanout_open no longer sets the size of packet_socket ring, so stop passing the parameter. Signed-off-by:
Mike Maloney <maloney@google.com> Acked-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1850540 This allows to roll out the support for the alternate layout which accidentally got introduced since kernel v3.14+ without causing breakage on reboot. The real danger is moving between a 3.13 or older kernel and any newer. This either has already happened and the damage has potentially been done or is not yet immediate or not happening at all (if the raid0 array was created by a 3.14+ kernel). So it is better to just warn from the kernel or once the user-space tool supporting meta-data update gets rolled out, from there as well. Once user-space is in place an with a bit of waiting time this change should get reverted later. Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
dann frazier authored
BugLink: https://bugs.launchpad.net/bugs/1850540 Helping an administrator understand this issue and how to deal with it requires more text than achievable in a kernel error message. Let's clarify the issue in the Ubuntu wiki, and have the kernel emit a link to it. I've submitted a similar change upstream: https://marc.info/?l=linux-raid&m=157360088014027&w=2 Should it get merged, we should consider replacing this patch with that one. Otherwise, it is probably safe to drop this SAUCE patch after focal. Signed-off-by:
dann frazier <dann.frazier@canonical.com> (cherry picked from bionic/18.04 submission into xenial/16.04) Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1850540 [ Upstream commit e3fc3f3d ] The first argument to WARN() is supposed to be a condition. The original code will just print the mdname() instead of the full warning message. Fixes: c84a1372 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Signed-off-by:
-
Song Liu authored
BugLink: https://bugs.launchpad.net/bugs/1850540 [ Upstream commit 3874d73e ] The message should match the parameter, i.e. raid0.default_layout. Fixes: c84a1372 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: NeilBrown <neilb@suse.de> Reported-by:
Ivan Topolsky <doktor.yak@gmail.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1850540 Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1850540 [ Upstream commit c84a1372 ] If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by:
-
- 28 Jan, 2020 1 commit
-
-
YueHaibing authored
CVE-2019-20096 If dccp_feat_push_change fails, we forget free the mem which is alloced by kmemdup in dccp_feat_clone_sp_val. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: e8ef967a ("dccp: Registration routines for changing feature values") Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 15 Jan, 2020 4 commits
-
-
Marcelo Henrique Cerri authored
Signed-off-by: -
Marcelo Henrique Cerri authored
BugLink: https://bugs.launchpad.net/bugs/1859718 Properties: no-test-build Signed-off-by:
-
Akeem G Abodunrin authored
Intel GPU Hardware prior to Gen11 does not clear EU state during a context switch. This can result in information leakage between contexts. For Gen8 and Gen9, hardware provides a mechanism for fast cleardown of the EU state, by issuing a PIPE_CONTROL with bit 27 set. We can use this in a context batch buffer to explicitly cleardown the state on every context switch. As this workaround is already in place for gen8, we can borrow the code verbatim for Gen9. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> CVE-2019-14615 (backported from commit bc8a76a1) [tyhicks: Backport to 4.4: - Apply patch to i915_bpo driver since it handles gen9 chips - Use (i915_scratch_offset(engine->i915) + 2 * CACHELINE_BYTES) in place of LRC_PPHWSP_SCRATCH_ADDR and PIPE_CONTROL_GLOBAL_GTT_IVB in place of PIPE_CONTROL_STORE_DATA_INDEX since we're missing commit e1237523 ("drm/i915/execlists: Use per-process HWSP as scratch") - Remove unused dev_priv variable - Replace the existing WaClearSlmSpaceAtContextSwitch that was being used for pre-production Kaby Lake] Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Signed-off-by:
-
- 08 Jan, 2020 6 commits
-
-
Connor Kuehl authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1858798 This reverts commit 800d3f56 upstream. This commit introduces a build failure in tools/perf on environments that don't have libunwind installed. [...] builtin-report.c: In function ‘report__setup_sample_type’: builtin-report.c:289:6: error: ‘dwarf_callchain_users’ undeclared (first use in this function) if (dwarf_callchain_users) { ^ [...] The variable 'dwarf_callchain_users' was introduced by eabad8c6 "perf unwind: Do not look just at the global callchain_param.record_mode" which as of now hasn't been backported to stable linux-4.4.y. So revert this commit to fix the build failure. Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by:
-
Connor Kuehl authored
Since it's missing s390x, check-config will complain that these policies aren't being met, even though they are! So, add an s390x entry to make it happy. Ignore: yes Signed-off-by: -
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1858594 Properties: no-test-build Signed-off-by:
-
Connor Kuehl authored
Ignore: yes Signed-off-by: -
Thadeu Lima de Souza Cascardo authored
Whenever config-check finds an entry like: CONFIG_VFIO mark<ENFORCED>note<LP#1636733> it will consider mark<ENFORCED>note as the option name, as the regexp allows any characters not in the whitespace class (\S). By using a class like [^\s<], that is, not whitespace and not '<', it will be correctly parsed. We could fix the entries that have this problem, but fixing the parser is more robust. Ignore: yes Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
-
