- 24 Aug, 2021 11 commits
-
-
Jani Nikula authored
Split out fb related stuff from intel_display.c to intel_fb.c. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/35c3ade81a54fea890cf92e21b778c38ab78cd04.1629721467.git.jani.nikula@intel.com
-
Jani Nikula authored
This will be needed in multiple places soon. Reviewed-by:
-
Jani Nikula authored
Let's try to reduce the size of intel_display.c, not increase it. Reviewed-by:
-
Jani Nikula authored
The unsigned doesn't help us here. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Swati Sharma authored
drm_dp_dpcd_read/write already has debug error message. Drop redundant error messages which gives false status even if correct value is read in drm_dp_dpcd_read(). v2: -Added fixes tag (Ankit) v3: -Fixed build error (CI) Fixes: 9488a030 ("drm/i915: Add support for enabling link status and recovery") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
-
Jani Nikula authored
DP 2.0 UHBR link rates always use 128b/132b channel encoding, which has a different data bandwidth efficiency from 8b/10b. The computation is slightly convoluted due to the units we use; this is all explained in the added comment. v2: Clarified comment (Manasi) Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
DG2 supports DP 2.0 UHBR and 128b/132b channel encoding. Bspec: 53657, 54034 Acked-by:
-
Jani Nikula authored
Add the registers for specifying the lower and higher 24 bits of the DP 2.0 pixel clock frequency in Hz. Bspec: 53326 Reviewed-by:
-
Jani Nikula authored
This register controls the DP 2.0 datapath. Bspec: 69967 Reviewed-by:
-
Jani Nikula authored
See if sink supports DP 2.0 128b/132b channel encoding, and update sink rates accordingly. FIXME: Also take LTTPR 128b/132b into account. v2: Add build-time check for ->sink_rates size (Ville) Reviewed-by:
-
Jani Nikula authored
The MST code uses actual link rates in the limits struct, while the DP code in general uses indexes to the ->common_rates[] array. Fix the confusion by using actual link rate values everywhere. This is a better abstraction than some obscure index. Rename the struct members while at it to ensure all the places are covered. Reviewed-by:
-
- 23 Aug, 2021 1 commit
-
-
Tejas Upadhyay authored
Sync PCI IDs with Bspec. Bspec:53655 Changes since V2: - Upstream devices which are "POR" yes and "Ok to upstream" yes - James Asmus Changes since V1: - All POR and Non POR Ids needs to be upstreamed - James Asmus Signed-off-by:Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210818050116.1116237-1-tejaskumarx.surendrakumar.upadhyay@intel.com
-
- 20 Aug, 2021 10 commits
-
-
Kai-Heng Feng authored
Users reported that after commit 2bbd6dba ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure"), the screen starts to have wobbly effect. Commit a5c936ad ("drm/i915/dp: Use slow and wide link training for everything") doesn't help either, that means the affected eDP 1.2 panels only work with max params. So use max params for panels < eDP 1.4 as Windows does to solve the issue. v3: - Do the eDP rev check in intel_edp_init_dpcd() v2: - Check eDP 1.4 instead of DPCD 1.1 to apply max params Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3714 Fixes: 2bbd6dba ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure") Fixes: a5c936ad ("drm/i915/dp: Use slow and wide link training for everything") Suggested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Ville Syrjälä authored
Polish the FBC stride override stuff: - just call it override_cfb_stride since it'll be used on more gens later - Use REG_BIT() & co. for the registers and give everything CHICKEN_ prefix since glk+ will have a different register for this - Use intel_de_rmw() for the RMW Signed-off-by:
-
Ville Syrjälä authored
On ILK+ we current do a nuke right after activating FBC. If my memory isn't playing tricks on me this is actially required if FBC didn't stay disabled for a full frame. In that case the deactivate+reactivate may not invalidate the cfb. I'd have to double chekc to be sure though. So let's keep the nuke, and just extend it backwards to cover all the platforms by doing it a bit higher up. Reviewed-by:
-
Ville Syrjälä authored
Pull the fbc enable vs. disable stuff into a small helper so we don't have to have it pollute the higher level modeset code. Reviewed-by:
-
Ville Syrjälä authored
Write the tiling check in a nicer form. No functional changes due to Y-tile scanout being a gen9+ feature. Reviewed-by:
-
Jani Nikula authored
There's no performance reason to have it as static inline; move it out of intel_display_types.h to reduce clutter and dependency on i915_drv.h. Reviewed-by:
-
Jani Nikula authored
There's no performance reason to have it as static inline; move it out of intel_display_types.h to reduce clutter and dependency on i915_drv.h. Reviewed-by:
-
Jani Nikula authored
The fewer includes the better. Reviewed-by:
-
Jani Nikula authored
Reduce includes. Reviewed-by:
-
Jani Nikula authored
Presumably if the compiler is smart, it does not generate an extra function call to the update functions that are now static. Reviewed-by:
-
- 18 Aug, 2021 2 commits
-
-
Matt Roper authored
One of the cases that the bspec lists for when underrun recovery must be disabled is "COG;" that note actually refers to eDP multi-segmented operation (MSO). Let's ensure the this additional restriction is honored by the driver. Bspec: 50351 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: ba3b049f ("drm/i915/adl_p: Allow underrun recovery when possible") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210816204112.2960624-1-matthew.d.roper@intel.comReviewed-by:
-
Lee Shawn C authored
After DPRX link training, intel_dp_link_train_phy() did not return the training result properly. If link training failed, i915 driver would not run into link train fallback function. And no hotplug uevent would be received by user space application. Fixes: b30edfd8 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: William Tseng <william.tseng@intel.com> Signed-off-by:
Lee Shawn C <shawn.c.lee@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
- 16 Aug, 2021 5 commits
-
-
José Roberto de Souza authored
There is no users of it, so no need to keep handling for it. Reviewed-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
José Roberto de Souza authored
skl_calc_main_surface_offset() is used to calculate an aligned plane surface address considering the inner framebuffer x and y offset. It can not be used by selective fetch functions becase there is no PLANE_SEL_FETCH_SURF. So the PLANE_SEL_FETCH_OFFSET.y should only be PLANE_OFFSET.y + damaged_area_within_plane.y1. This fixes glitches seen in fbcon caused by typing something in the terminal. BSpec: 55229 Reviewed-by:
-
Jani Nikula authored
The symbol isn't needed outside of i915.ko. Fixes: b30edfd8 ("drm/i915: Switch to LTTPR non-transparent mode link training") Fixes: 264613b4 ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4") Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Jani Nikula authored
Catch up with drm core changes. Signed-off-by: -
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - Add lockdep_assert(once) helpers. Core Changes: - Add lockdep assert to drm_is_current_master_locked. - Fix typos in dma-buf documentation. - Mark drm irq midlayer as legacy only. - Fix GPF in udmabuf_create. - Rename member to correct value in drm_edid.h Driver Changes: - Build fix to make nouveau build with NOUVEAU_BACKLIGHT. - Add MI101AIT-ICP1, LTTD800480070-L6WWH-RT panels. - Assorted fixes to bridge/it66121, anx7625. - Add custom crtc_state to simple helpers, and use it to convert pll handling in mgag200 to atomic. - Convert drivers to use offset-adjusted framebuffer bo mappings. - Assorted small fixes and fix for a use-after-free in vmwgfx. - Convert remaining callers of non-legacy drivers to use linux irqs directly. - Small cleanup in ingenic. - Small fixes to virtio and ti-sn65dsi86. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1cf2d7fc-402d-1852-574a-21cbbd2eaebf@linux.intel.com
-
- 13 Aug, 2021 6 commits
-
-
Jani Nikula authored
UHBR link rates use different tx equalization settings. Using this will require changes in the link training code too. Bspec: 53920 Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Jani Nikula authored
We use encoder->get_buf_trans() in many places, for example intel_ddi_dp_voltage_max(), and the hook was set to some old platform's function for DG2 SNPS PHY. Convert SNPS PHY to use the same translation mechanisms as everything else. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Jani Nikula authored
Needed in the future. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Jani Nikula authored
Less is more, fewer lines to wonder about. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Jani Nikula authored
ADL-P supports stream splitter on pipe B in addition to pipe A. Update the sanity check in intel_ddi_mso_get_config() to reflect this, and remove the check in intel_ddi_mso_configure() as redundant with encoder->pipe_mask. Abstract the splitter pipe mask to a single point of truth while at it to avoid similar mistakes in the future. Fixes: 7bc188cc ("drm/i915/adl_p: enable MSO on pipe B") Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Swati Sharma <swati2.sharma@intel.com> Reviewed-by:
-
Imre Deak authored
Atm the EFI FB platform driver gets a runtime PM reference for the associated GFX PCI device during probing the EFI FB platform device and releases it only when the platform device gets unbound. When fbcon switches to the FB provided by the PCI device's driver (for instance i915/drmfb), the EFI FB will get only unregistered without the EFI FB platform device getting unbound, keeping the runtime PM reference acquired during the platform device probing. This reference will prevent the PCI driver from runtime suspending the device. Fix this by releasing the RPM reference from the EFI FB's destroy hook, called when the FB gets unregistered. While at it assert that pm_runtime_get_sync() didn't fail. v2: - Move pm_runtime_get_sync() before register_framebuffer() to avoid its race wrt. efifb_destroy()->pm_runtime_put(). (Daniel) - Assert that pm_runtime_get_sync() didn't fail. - Clarify commit message wrt. platform/PCI device/driver and driver removal vs. device unbinding. Fixes: a6c0fd3d ("efifb: Ensure graphics device for efifb stays at PCI D0") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Acked-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
-
- 12 Aug, 2021 5 commits
-
-
Rob Clark authored
If we created our own connector because the driver does not support the NO_CONNECTOR flag, we don't want the downstream bridge to *also* create a connector. And if this driver did pass the NO_CONNECTOR flag (and we supported that mode) this would change nothing. Fixes: 4e5763f0 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge") Reported-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
-
Lucas De Marchi authored
Byte 26 in a edid struct is supposed to be "Blue and white least-significant 2 bits", not "black and white". Rename the field accordingly. This field is not used anywhere, so just renaming it here for correctness. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
David Stevens authored
Blob resources without the cross device flag don't have a uuid to share with other virtio devices. When exporting such blobs, set uuid_state to STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang. Signed-off-by:
David Stevens <stevensd@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Anshuman Gupta authored
dispcnlunit1_cp_xosc_clkreq clock observed to be active on TGL-H platform despite Wa_14010685332 original sequence, thus blocks entry to deeper s0ix state. The Tweaked Wa_14010685332 sequence fixes this issue, therefore use tweaked Wa_14010685332 sequence for every PCH since PCH_CNP. v2: - removed RKL from comment and simplified condition. [Rodrigo] Fixes: b896898c ("drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported general protection fault in udmabuf_create. The problem was in wrong error handling. In commit 16c243e9 ("udmabuf: Add support for mapping hugepages (v4)") shmem_read_mapping_page() call was replaced with find_get_page_flags(), but find_get_page_flags() returns NULL on failure instead PTR_ERR(). Wrong error checking was causing GPF in get_page(), since passed page was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage) Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com Fixes: 16c243e9 ("udmabuf: Add support for mapping hugepages (v4)") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.comSigned-off-by:
-
