- 08 Sep, 2010 9 commits
-
-
Jan Glauber authored
Extend the qdio API to allow polling in the upper-layer driver. This is needed by qeth to use NAPI. To use the new interface the upper-layer driver must specify the queue_start_poll(). This callback is used to signal the upper-layer driver that is has initiative and must process the inbound queue by calling qdio_get_next_buffers(). If the upper-layer driver wants to stop polling it calls qdio_start_irq(). Since adapter interrupts are not completely stoppable qdio implements a software bit QDIO_QUEUE_IRQS_DISABLED to safely disable interrupts for an input queue. The old interface is preserved and will be used as is by zfcp. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
Several users report issues with 32-bit adapters when plugged into PCI slots in machines with >= 4GB ram. In particular AMD systems with HyperTransport to PCI bridges seem to trigger the issue, but it isn't limited to only them. This issue is not easily reproducible here, yet still continues to occur in the field. For e1000 on PCI devices, just disable DMA addresses over the 4GB boundary when in PCI (not PCI-X) mode, to prevent the issue from continuing to pop up. The performance impact for this is negligible. The code was refactored to move the init of the hw struct to its own function. This allows the init to be called very early in probe, which then allows using hw-> members for this fix. A slight refactor to the DMA mask code was done for minor correctness based on the instructions in DMA-API-HOWTO. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Eric Dumazet authored
We use rcu_dereference_check(p, rcu_read_lock_held() || lockdep_rtnl_is_held()) several times in network stack. More usages to come too, so its time to create a helper. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: netdev@vger.kernel.org Signed-off-by:
-
Namhyung Kim authored
Casts __kernel to __user pointer require __force markup, so add it. Also sock_get/setsockopt() takes @optval and/or @optlen arguments as user pointers but were taking kernel pointers, use new variables 'uoptval' and/or 'uoptlen' to fix it. These remove following warnings from sparse: net/socket.c:1922:46: warning: cast adds address space to expression (<asn:1>) net/socket.c:3061:61: warning: incorrect type in argument 4 (different address spaces) net/socket.c:3061:61: expected char [noderef] <asn:1>*optval net/socket.c:3061:61: got char *optval net/socket.c:3061:69: warning: incorrect type in argument 5 (different address spaces) net/socket.c:3061:69: expected int [noderef] <asn:1>*optlen net/socket.c:3061:69: got int *optlen net/socket.c:3063:67: warning: incorrect type in argument 4 (different address spaces) net/socket.c:3063:67: expected char [noderef] <asn:1>*optval net/socket.c:3063:67: got char *optval net/socket.c:3064:45: warning: incorrect type in argument 5 (different address spaces) net/socket.c:3064:45: expected int [noderef] <asn:1>*optlen net/socket.c:3064:45: got int *optlen net/socket.c:3078:61: warning: incorrect type in argument 4 (different address spaces) net/socket.c:3078:61: expected char [noderef] <asn:1>*optval net/socket.c:3078:61: got char *optval net/socket.c:3080:67: warning: incorrect type in argument 4 (different address spaces) net/socket.c:3080:67: expected char [noderef] <asn:1>*optval net/socket.c:3080:67: got char *optval Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Ondrej Zary authored
This patch introduces cx82310_eth driver - driver for USB ethernet port of ADSL routers based on Conexant CX82310 chips. Such routers usually have ethernet port(s) too which are bridged together with the USB ethernet port, allowing the USB-connected machine to communicate to the network (and also internet through the ADSL, of course). This is my first driver, so please check thoroughly. As there's no protocol documentation, it was done with usbsnoop dumps from Windows driver, some parts (the commands) inspired by cxacru driver and also other usbnet drivers. The driver passed my testing - some real work and also pings sized from 0 to 65507 B. The only problem I found is the ifconfig error counter. When I return 0 (or 1 but empty skb) from rx_fixup(), usbnet increases the error counter although it's not an error condition (because packets can cross URB boundaries). Maybe the usbnet should be fixed to allow rx_fixup() to return empty skbs (or some other value, e.g. 2)? The USB ID of my device is 0x0572:0xcb01 which conflicts with some ADSL modems using cxacru driver (they probably use the same chipset but simpler firmware). The modems seem to use bDeviceClass 0 and iProduct "ADSL USB MODEM", my router uses bDeviceClass 255 and iProduct "USB NET CARD". The driver matches only devices with class 255 and checks for the iProduct string during init. I already posted a patch for the cxacru driver to ignore these devices. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Changli Gao authored
When there is only one rps_cpus, skb_get_rxhash() can be eliminated. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
Diego Elio 'Flameeyes' Pettenò authored
This simple patch copies the current approach for SIOCINQ ioctl() from DCCP into SCTP so that the userland code working with SCTP can use a similar interface across different protocols to know how much space to allocate for a buffer. Signed-off-by:
Diego Elio Pettenò <flameeyes@gmail.com> Signed-off-by:
-
- 07 Sep, 2010 31 commits
-
-
Eric Dumazet authored
- Use napi_gro_receive() and vlan_gro_receive() - Enable GRO by default Tested on a RTL8111/8168 adapter Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Yaniv Rosner authored
Note that the date format was fixed. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Change LED scheme for dual-media Signed-off-by:
-
Yaniv Rosner authored
Add required changes in order to support dual-media boards. Signed-off-by:
-
Yaniv Rosner authored
Group all PHY specific functions together to have an organized code Signed-off-by:
-
Yaniv Rosner authored
Make the needed changes for the new scheme especially around PHY initialization, and link detection. - The get_emac_base function was changed to enable setting different MAC access setting for each PHY based of external configuration. - As a part of the dual-media preparation, the save_spirom_version was modified to accept a PHY specific version address to be saved in the shmem. This will enable to save more than single spirom version in different locations. - The test_link function was changed also as a preparation for the dual-media upcoming changes - Duplicate initialization logic was removed from the link_setting_status and link_initialize functions Signed-off-by:
-
Yaniv Rosner authored
Move all PHY specific logic from bnx2x_main into bnx2x_link. Signed-off-by:
-
Yaniv Rosner authored
Flow control implementation is split to be done in each PHY function. Signed-off-by:
-
Yaniv Rosner authored
In previous patch, common PHY functions were split in simple way to allow easy diff. This patch comes to align code in the new functions. In addition, the non-production BCM8072 PHY was removed. Signed-off-by:
-
Yaniv Rosner authored
Move the code into PHY oriented functions, and for that a new structure is defines for each PHY which contain PHY properties and its own functions. This also enables to encapsulate all PHY specific operations into the PHY functions. During initialization, the PHYs will be probed by the "bnx2x_phy_probe" function to detect which PHYs exist on-board, and configure them accordingly. Note that the ext_phy_reset implementation was incorporated in the ext_phy_init since it is actually part of the PHY initialization procedure. Signed-off-by:
-
Yaniv Rosner authored
Start building the infrastructure for dual media by adding new component of PHY which will be used all along the function. Modify function to work with this component instead of the link_params. Signed-off-by:
-
Eric Dumazet authored
No need to test twice sk->sk_shutdown & RCV_SHUTDOWN Signed-off-by:
-
Yevgeny Petrilin authored
The values didn't match the title after removing the LRO statistics in commit fa37a958Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by:
-
Joe Perches authored
Convert pr_<level>("%s" ..., (struct netdev *)->name ...) to netdev_<level>((struct netdev *), ...) Signed-off-by: -
Joe Perches authored
This patch standardizes caif message logging prefixes. Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__ Add missing "\n"s to some logging messages Convert pr_warning to pr_warn This changes the logging message prefix from CAIF: to caif: for all uses but caif_socket.c and chnl_net.c. Those now use their filename without extension. Signed-off-by:
-
Julia Lawall authored
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by:
-
Christian Dietrich authored
The CHELSIO_T1_1G ifdef isn't necessary at this point, because it is checked in an outer ifdef level already and has no effect here. Signed-off-by:
Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by:
-
Joe Perches authored
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert jeprintk to pr_err Remove jeprintk macro define Remove periods from end of logging messages Coalesce format strings Signed-off-by:
-
Dan Carpenter authored
This showed up in my audit because we use strcpy() to copy "ds" into a 32 character buffer inside the isdn_tty_dial() function. But it turns out that we only ever use the first 32 characters so it's OK. I have changed the declaration to make the static checkers happy. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
cs->ics.parm.setup.phone is a 32 character array. In each of these cases we're copying from a 35 character array into a 32 character array so we should use strlcpy() instead of strcpy(). Signed-off-by:
-
Jiri Slaby authored
bnad_set_rx_mode omit to unlock bna_lock on one fail path. Fix that. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Debashis Dutt <ddutt@brocade.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julia Lawall authored
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Eric Dumazet authored
pskb_expand_head() blindly takes references on fragments before calling skb_release_data(), potentially releasing these references. We can add a fast path, avoiding these atomic operations, if we own the last reference on skb->head. Based on a previous patch from David Signed-off-by:
-
Santiago Leon authored
Add an entry to the MAINTAINERS file for ibmveth, clean up the copyright and add all authors. Change the name of the module to reflect the product name over the last number of years. Considering all the changes we have made, bump the driver version. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by:
-
Santiago Leon authored
These files probably came across from the skeleton driver. Remove them. Signed-off-by:
-
Santiago Leon authored
We had a driver specific assert function which wasn't enabled most of the time. Convert them to BUG_ON and enable them all the time. Signed-off-by:
-
Santiago Leon authored
We had a few cases where we returned success on error. Signed-off-by:
-
Santiago Leon authored
Fix most of the kernel coding style issues in ibmveth. Signed-off-by:
-
Santiago Leon authored
IbmVethNumBufferPools -> IBMVETH_NUM_BUFF_POOLS Also change IBMVETH_MAX_MTU -> IBMVETH_MIN_MTU, it refers to the minimum size not the maximum. Signed-off-by:
-
