This device is an integrated module of the Delta AHE-50DC Open19 power
shelf.  I haven't been able to procure any proper documentation for
it, but it seems to be a (somewhat minimally) PMBus-compliant device.
It provides four fan speeds, four temperatures (three standard and one
manufacturer-specific via a virtual second page), and a vin reading.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20211208213703.2577-2-zev@bewilderbeest.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The command ./scripts/kernel-doc -none include/linux/hwmon.h warns:

  include/linux/hwmon.h:406: warning: This comment starts with '/**', but
    isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
   * Channel information
  include/linux/hwmon.h:425: warning: This comment starts with '/**', but
    isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
   * Chip configuration

Address those kernel-doc warnings by prefixing kernel-doc descriptions for
structs with the keyword 'struct'.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211216154257.26758-1-lukas.bulwahn@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This adds the Samsung 1404-001221 NTC thermistor to the
NTC thermistor driver. As far as I can tell it is electrically
compatible with the Murata 47K NTC thermistor.

This thermistor is mounted in a variety of Samsung products.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215174241.1496169-1-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The driver has been augmented to just use device properties
so the OF dependency can be dropped.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211215142933.1409324-1-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The only purpose of i8k_ioctl() is to call i8k_ioctl_unlocked()
with i8k_mutex held. Judging from the hwmon code, this mutex
only needs to be held when setting the fan speed/mode, so
the operation of I8K_SET_FAN is guaranteed to be atomic.
Unify both functions and reduce the locking of i8k_mutex
to I8K_SET_FAN.

Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211211155422.16830-3-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The second switch-case has no real purpose:

- for I8K_BIOS_VERSION, val does not represent a return value,
  making the check for error values unnecessary.
- for I8K_MACHINE_ID, val remains zero, so the error check is
  unnecessary too.

Remove the switch-case and move the calls to copy_to_user()
into the first switch-case for I8K_BIOS_VERSION/_MACHINE_ID.
Omit buff[] since data->bios_machineid already contains the string
with the necessary zero padding through devm_kzalloc().

Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211211155422.16830-2-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Exit immediately if devm_hwmon_device_register_with_info()
fails since registering a delayed work whould be useless
in such a case anyway.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20211211184449.18211-1-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This code can fit on one line. No need to break it up.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211215114050.GB14967@kiliSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This moves the device tree match data toward the end of the
driver which is the convention, here we can also add ACPI
and similar match data in a conforming manner.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211205235948.4167075-3-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This switches to retrieveing the configuration of the NTC
from generic firmware properties so that we get neutral from
device tree: now ACPI or, more importantly, software nodes
can be used to spawn NTC devices provided they have the
required properties.

This was inspired by the similar changes made to the IIO
drivers.

This was tested on the Ux500 HREF with the NTC devices
probing from device tree just as fine after this as before.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206020423.62402-2-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Move the parsing of the DT config right above probe().

Allocate the state container for the driver in probe()
instead of inside the DT config parsing function: as a
result return an int instead of a pointer.

Drop the check for !np: we can only probe from DT right
now so no risk of ending up here.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206020423.62402-1-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Variable range is being initialized with a value that is never read, it
is being re-assigned in the next statement. The assignment is redundant,
remove it and initialize range using the second assigned value. Clean up
the formatting too by adding missing spaces.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211204233155.55454-1-colin.i.king@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Smatch detects this array overflow:

    drivers/hwmon/asus_wmi_sensors.c:569 asus_wmi_configure_sensor_setup()
    error: buffer overflow 'hwmon_attributes' 8 <= 9

The hwmon_attributes[] array should have "hwmon_max" so that it gets
larger when more attributes are added.

Fixes: 9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130105117.GH5827@kiliSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Smatch detected an array out of bounds error:

    drivers/hwmon/asus_wmi_ec_sensors.c:562 asus_wmi_ec_configure_sensor_setup()
    error: buffer overflow 'hwmon_attributes' 8 <= 9

The hwmon_attributes[] array needs to be declared with "hwmon_max"
elements.

Fixes: c04c7f7bfcbe ("hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130105034.GG5827@kiliSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This patch enables automatic loading of the sht4x module via a device
tree table entry.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Link: https://lore.kernel.org/r/20211121160637.2312106-1-davidm@egauge.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Allocate one state container for the device: struct ntc_data.
Move all items from struct ntc_thermistor_platform_data into
this struct and simplify.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-5-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The only possible assignment of a function to get a voltage to
convert to a resistance is to use the internal function
ntc_adc_iio_read() which is only available when using IIO
and OF.

Bite the bullet and mandate OF and IIO, drop the read_uv()
callback abstraction and some ifdefs.

As no board is using the platform data, all users are using
OF and IIO anyway.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-4-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Nothing in the kernel (this driver) is using the callback to
read ohms directly. We always read a voltage and convert it
to a resistance. Drop this callback.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-3-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Platform data is supposed to be used with "board files",
device descriptions in C. Since the introduction of the
NTC driver in 2011, no such platforms have been submitted
to the Linux kernel, and their use is strongly discouraged
in favor of Device Tree, ACPI or as last resort software
firmware nodes.

Drop the external header and copy the platform data into
the driver file.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-2-linus.walleij@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

N34TS04 is a JC42.4 compatible temperature sensor from ONSEMI.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The current driver can read the temperatures from upto 8 CCDs
(Core-Complex Die).

The newer AMD Family 19h Models 10h-1Fh and A0h-AFh can support up to
12 CCDs. Update the driver to read up to 12 CCDs.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163776976762.904164.5618896687524494215.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Provides a Linux kernel module "asus_wmi_sensors" that provides sensor
readouts via ASUS' WMI interface present in the UEFI of
X370/X470/B450/X399 Ryzen motherboards.

Supported motherboards:
* ROG CROSSHAIR VI HERO,
* PRIME X399-A,
* PRIME X470-PRO,
* ROG CROSSHAIR VI EXTREME,
* ROG CROSSHAIR VI HERO (WI-FI AC),
* ROG CROSSHAIR VII HERO,
* ROG CROSSHAIR VII HERO (WI-FI),
* ROG STRIX B450-E GAMING,
* ROG STRIX B450-F GAMING,
* ROG STRIX B450-I GAMING,
* ROG STRIX X399-E GAMING,
* ROG STRIX X470-F GAMING,
* ROG STRIX X470-I GAMING,
* ROG ZENITH EXTREME,
* ROG ZENITH EXTREME ALPHA.
Co-developed-by: Ed Brindley <kernel@maidavale.org>
Signed-off-by: Ed Brindley <kernel@maidavale.org>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
[groeck: Squashed:
 "hwmon: Fix warnings in asus_wmi_sensors.rst documetation."]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Linux HWMON sensors driver for ASUS motherboards to read
sensors from the embedded controller.

Many ASUS motherboards do not publish all the available
sensors via the Super I/O chip but the missing ones are
available through the embedded controller (EC) registers.

This driver implements reading those sensor data via the
WMI method BREC, which is known to be present in all ASUS
motherboards based on the AMD 500 series chipsets (and
probably is available in other models too). The driver
needs to know exact register addresses for the sensors and
thus support for each motherboard has to be added explicitly.

The EC registers do not provide critical values for the
sensors and as such they are not published to the HWMON.

Supported motherboards:
* PRIME X570-PRO
* Pro WS X570-ACE
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII DARK HERO
* ROG CROSSHAIR VIII FORMULA
* ROG STRIX X570-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX B550-E GAMING
Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Tor Vic <torvic9@mailbox.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This adds hardware monitor support the Fintek F81966 Super I/O chip.
Testing was done on the Aaeon SSE-IPTI
Signed-off-by: Menghui Wu <Menghui_Wu@aaeon.com.tw>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20211117024320.2428144-1-acelan.kao@canonical.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The adm1021 driver is quite generous with its automatic chip detection
and easily misdetects several chips. Strengthen detection of MAX1617,
MAX1617A, and LM84 to make the driver less vulnerable to false matches.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Since we are using regmap access functions to write into chip registers,
we can hide the difference in register write addresses within regmap
code. By doing this we do not need to clear the regmap cache on register
writes, and the high level code does not need to bother about different
read/write register addresses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use regmap for register accesses to be able to utilize its caching
functionality. This also lets us hide register access differences
in regmap code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The new API is cleaner and reduces code size significantly.
All chip accesses are 'hidden' in chip access to prepare for using
regmap. Local caching code is removed, to be replaced by regmap based
caching in a follow-up patch.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The difference between TMP431 and other chips of this series is that the
TMP431 has an additional sensor. The register addresses for other sensors
are the same for all chips. It is therefore unnecessary to maintain two
different arrays for TMP431 and the other chips. Just use the same array
for all chips and add the TMP431 register addresses as third column.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The INA238 is a I2C power monitor similar to other INA2xx devices,
providing shunt voltage, bus voltage, current, power and temperature
measurements.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Link: https://lore.kernel.org/r/20211102052754.817220-3-nathan@nathanrossi.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add a property to the binding to define the selected shunt voltage gain.
This specifies the range and accuracy that applies to the shunt circuit.
This property only applies to devices that have a selectable shunt
voltage range via PGA or ADCRANGE register configuration.
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211102052754.817220-2-nathan@nathanrossi.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Document the compatible string for the Texas Instruments INA238, this
device is a variant of the existing INA2xx devices and has the same
device tree bindings (shunt resistor).
Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211102052754.817220-1-nathan@nathanrossi.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add thermal info support for AMD Family 19h Models 10h-1Fh and A0h-AFh.
Thermal info is supported via a new PCI device ID at offset 0x300h.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163640829419.955062.12539219969781039915.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Usage of these definitions were removed after the commit 0a4e668b
("hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs").
So, cleanup them up.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/163640828776.955062.15863375803675701204.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add the new PCI Device IDs to support new generation of AMD 19h family of
processors.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>  # pci_ids.h
Link: https://lore.kernel.org/r/163640828133.955062.18349019796157170473.stgit@bmoger-ubuntuSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull x86 fixes from Borislav Petkov:

 - Prevent potential undefined behavior due to shifting pkey constants
   into the sign bit

 - Move the EFI memory reservation code *after* the efi= cmdline parsing
   has happened

 - Revert two commits which turned out to be the wrong direction to
   chase when accommodating early memblock reservations consolidation
   and command line parameters parsing

* tag 'x86_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkey: Fix undefined behaviour with PKRU_WD_BIT
  x86/boot: Move EFI range reservation after cmdline parsing
  Revert "x86/boot: Pull up cmdline preparation and early param parsing"
  Revert "x86/boot: Mark prepare_command_line() __init"

Pull objtool fixes from Borislav Petkov:

 - Prevent clang from reordering the reachable annotation in
   an inline asm statement without inputs

 - Fix objtool builds on non-glibc systems due to undefined
   __always_inline

* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compiler.h: Fix annotation macro misplacement with Clang
  uapi: Fix undefined __always_inline on non-glibc systems

Pull pin control fixes from Linus Walleij:
 "Some hopefully final pin control fixes for the v5.16 kernel:

   - Fix an out-of-bounds bug in the Mediatek driver

   - Fix an init order bug in the Broadcom BCM2835 driver

   - Fix a GPIO offset bug in the STM32 driver"

* tag 'pinctrl-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
  pinctrl: bcm2835: Change init order for gpio hogs
  pinctrl: mediatek: fix global-out-of-bounds issue

Merge tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "A couple of lm90 driver fixes. None of them are critical, but they
  should nevertheless be fixed"

* tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (lm90) Do not report 'busy' status bit as alarm
  hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
  hwmon: (lm90) Drop critical attribute support for MAX6654
  hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
  hwmon: (lm90) Fix usage of CONFIG2 register in detect function