Need to mask it with (FNHE_HASH_SIZE - 1).
Signed-off-by: David S. Miller <davem@davemloft.net>

These patches implement the final mechanism necessary to really allow
us to go without the route cache in ipv4.

We need a place to have long-term storage of PMTU/redirect information
which is independent of the routes themselves, yet does not get us
back into a situation where we have to write to metrics or anything
like that.

For this we use an "next-hop exception" table in the FIB nexthops.

The one thing I desperately want to avoid is having to create clone
routes in the FIB trie for this purpose, because that is very
expensive.   However, I'm willing to entertain such an idea later
if this current scheme proves to have downsides that the FIB trie
variant would not have.

In order to accomodate this any such scheme, we need to be able to
produce a full flow key at PMTU/redirect time.  That required an
adjustment of the interface call-sites used to propagate these events.

For a PMTU/redirect with a fully specified socket, we pass that socket
and use it to produce the flow key.

Otherwise we use a passed in SKB to formulate the key.  There are two
cases that need to be distinguished, ICMP message processing (in which
case the IP header is at skb->data) and output packet processing
(mostly tunnels, and in all such cases the IP header is at ip_hdr(skb)).

We also have to make the code able to handle the case where the dst
itself passed into the dst_ops->{update_pmtu,redirect} method is
invalidated.  This matters for calls from sockets that have cached
that route.  We provide a inet{,6} helper function for this purpose,
and edit SCTP specially since it caches routes at the transport rather
than socket level.
Signed-off-by: David S. Miller <davem@davemloft.net>

It's done in very similar way this is done in bonding and bridge.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a regime where we have subnetted route entries, we need a way to
store persistent storage about destination specific learned values
such as redirects and PMTU values.

This is implemented here via nexthop exceptions.

The initial implementation is a 2048 entry hash table with relaiming
starting at chain length 5.  A more sophisticated scheme can be
devised if that proves necessary.
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the RFC 5691 mitigation against Blind
Reset attack using SYN bit.

Section 4.2 of RFC 5961 advises to send a Challenge ACK and drop
incoming packet, instead of resetting the session.

Add a new SNMP counter to count number of challenge acks sent
in response to SYN packets.
(netstat -s | grep TCPSYNChallenge)

Remove obsolete TCPAbortOnSyn, since we no longer abort a TCP session
because of a SYN flag.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kiran Kumar Kella <kkiran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used so that we can compose a full flow key.

Even though we have a route in this context, we need more.  In the
future the routes will be without destination address, source address,
etc. keying.  One ipv4 route will cover entire subnets, etc.

In this environment we have to have a way to possess persistent storage
for redirects and PMTU information.  This persistent storage will exist
in the FIB tables, and that's why we'll need to be able to rebuild a
full lookup flow key here.  Using that flow key will do a fib_lookup()
and create/update the persistent entry.
Signed-off-by: David S. Miller <davem@davemloft.net>

The interrupt registers accessed in ixgbevf are more similar to the igb
style registers than they are to the ixgbe style registers.  As such we
would be better off setting up the code for the EICS, EIMS, EICS, EIAM, and
EIAC like we do in igb instead of ixgbe.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently the VF driver is processing all of the transmits in interrupt
context.  This can be messy since the Rx is all handled in NAPI and this
may result in interrupts being disabled.  In order to resolve this move all
of the Tx packet processing into NAPI and combine all of the interrupt and
polling routines into just a pair of functions.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

For most cases the ixgbevf driver will only ever contain a single Tx and
single Rx queue.  In order to track that it makes more sense to use a
pointer instead of using a bitmap which must be search in order to locate
the ring on an adapter index.  As such I am changing the code to use
pointers and an iterator to access all rings on a given q_vector.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change cleans up the accounting needed at the start of xmit_frame so
that we can avoid doing too much work to determine how many descriptors we
will need.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch drops the use of eitr_low and eitr_high as values being stored
in the adapter structure.  Since the values have no external way to be
changed they might as well just be hard coded values and save us the space
on the adapter structure.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The IXGBE_FLAG_RX_CSUM_ENABLED flag is redundant since NETIF_F_RXCSUM is
keeping the value we want to already have.  As such we can drop the
redundant flag and just make use of NETIF_F_RXCSUM.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There is no need to keep a separate netdev_registered value since that is
already stored in the netdev itself.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There is a large amount of code present in this driver to support features
that either do no exist or are not supported such ask packet split, DCA, or
RSC.  This patch strips out almost all of that code and in the case of
conditionals based on unused flags I am flatting the code out to just the
path that would have been selected.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Implement the RFC 5691 mitigation against Blind
Reset attack using RST bit.

Idea is to validate incoming RST sequence,
to match RCV.NXT value, instead of previouly accepted
window : (RCV.NXT <= SEG.SEQ < RCV.NXT+RCV.WND)

If sequence is in window but not an exact match, send
a "challenge ACK", so that the other part can resend an
RST with the appropriate sequence.

Add a new sysctl, tcp_challenge_ack_limit, to limit
number of challenge ACK sent per second.

Add a new SNMP counter to count number of challenge acks sent.
(netstat -s | grep TCPChallengeACK)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kiran Kumar Kella <kkiran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to check the passed in multicast address and return
appropriate errno(EINVAL) if it is not valid. And it's no need
to walk through the ipv6_mc_list in this situation.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
the fifth pull request for upcoming v3.6 net-next. The first two
patches (created by me) add const qualifiers to the flexcan and
mpc5xxx_can driver. The next patch by Julia Lawall fixes a return value
problem in the error path of the softing driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Put the numbers used for stop/resume queue in a single place and
fix the condition for sanity check.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Typically, the return value desired for the failure of a function with an
integer return value is a negative integer.  In these cases, the return
value is sometimes a negative integer and sometimes 0, due to a subsequent
initialization of the return variable within the loop.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

//<smpl>
@r exists@
identifier ret;
position p;
constant C;
expression e1,e3,e4;
statement S;
@@

ret = -C
... when != ret = e3
    when any
if@p (...) S
... when any
if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; }
... when != ret = e3
    when any
*if@p (...)
{
  ... when != ret = e4
  return ret;
}
//</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The Asix AX88172A is a USB 2.0 Ethernet interface that supports both an
internal PHY as well as an external PHY (connected via MII).

This patch adds a driver for the AX88172A and provides support for
both modes and the phylib.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow the new driver for the AX88172A to share code with the
existing drivers for ASIX devices.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch further creates two additional copies of asix.c.
In another patch these copies will be used to factor out
common code.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building Gigaset's CAPI support without Gigaset's debugging enabled
triggers this GCC warning:
    'format_ie' defined but not used [-Wunused-function]

Silence this warning by wrapping format_ie() in an "#ifdef
CONFIG_GIGASET_DEBUG" and "#endif" pair.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

V2: Replaced assignment in if statement.
Fixed coding style issues.
Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct spelling typo in irda.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following sparse warning:
	* symbol 'sctp_init_cause_fixed' was not declared. Should it be
	  static?
Signed-off-by: Ioan Orghici <ioanorghici@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the PCI block has reset, the memory enable bit will be reset and
the device will not respond to MMIO access.  bnx2_reset_task() currently
will not recover when this happens.  Add code to detect this condition
and restore the PCI state.  This scenario has been reported by some
users.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some tg3 devices have management firmware that can export sensor data.
Export temperature sensor reading via hwmon sysfs.

[hwmon interface suggested by Ben Hutchings <bhutchings@solarflare.com>]
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

for retreiving temperature sensor data.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

by refactoring code in tg3_ape_send_event().  The common function will
be used in subsequent patches.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver currently skips setting this flag if the VPD contains the
firmware version string.  We fix this by separating the probing of NCSI
from the reading of the NCSI version string.  The APE_HAS_NCSI flag is
needed to properly read sensor data.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netem does an early orphaning of skbs. Doing so breaks TCP Small Queue
or any mechanism relying on socket sk_wmem_alloc feedback.

Ideally, we should perform this orphaning after the rate module and
before the delay module, to mimic what happens on a real link :

skb orphaning is indeed normally done at TX completion, before the
transit on the link.

+-------+   +--------+  +---------------+  +-----------------+
+ Qdisc +---> Device +--> TX completion +--> links / hops    +->
+       +   +  xmit  +  + skb orphaning +  + propagation     +
+-------+   +--------+  +---------------+  +-----------------+
      < rate limiting >                  < delay, drops, reorders >

If netem is used without delay feature (drops, reorders, rate
limiting), then we should avoid early skb orphaning, to keep pressure
on sockets as long as packets are still in qdisc queue.

Ideally, netem should be refactored to implement delay module
as the last stage. Current algorithm merges the two phases
(rate limiting + delay) so its not correct.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Mark Gordon <msg@google.com>
Cc: Andreas Terzis <aterzis@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jett Kirsher says:

====================
This series contains updates to e1000e and ixgbe.
 ...
Alexander Duyck (5):
  ixgbe: Simplify logic for getting traffic class from user priority
  ixgbe: Cleanup unpacking code for DCB
  ixgbe: Populate the prio_tc_map in ixgbe_setup_tc
  ixgbe: Add function for obtaining FCoE TC based on FCoE user priority
  ixgbe: Merge FCoE set_num and cache_ring calls into RSS/DCB config
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_fill_rx_data() pulls 64 byte of data in skb->data

Its too much for TCP (with no options) on IPv4, as total size of headers
is 14 + 40 = 54

This means tcp stack and splice() are suboptimal, since tcp payload
is in part in tcp->data, and in part in skb frag.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Incorporated review comment from Eric Dumazet. Added description
about different RSS hash types which adapter is capable of.
Will add support for ETHTOOL_GRXFH and ETHTOOL_SRXFX as suggested
by Ben Hutchings in a later patch.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hash size is doubled when it needs to grow and compared against
hash_max. The >= comparison will limit the hash table size to half
of what is expected i.e. the default 512 hash_max will not allow
the hash table to grow larger than 256.

Also print the hash table limit instead of the desirable size when
the limit is reached.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>