- 24 Jan, 2014 10 commits
-
-
Jayachandran C authored
No change in logic, the changes are: * cleanup some whitespace and comments * remove confusing argument of SYS_CPU_COHERENT_BASE macro * make the numerical labels in macros consistent Signed-off-by:
Jayachandran C <jchandra@broadcom.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6273/
-
Jayachandran C authored
Add mach-netlogic/topology.h which contains XLP cpu number to core and node mapping. Signed-off-by:
Jayachandran C <jchandra@broadcom.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6271/
-
Jayachandran C authored
Add MSI chip and MSIX chip definitions. For MSI, we map the link interrupt to a MSI link IRQ which will do a second level of dispatch based on the MSI status register. The MSI chip definitions use the MSI enable register to enable and disable the MSI irqs. For MSI-X, we split the 32 available MSI-X vectors across the four PCIe links (8 each). These PIC interrupts generate an IRQ per link which uses a second level dispatch as well. The MSI-X chip definition uses the standard functions to enable and disable interrupts. Signed-off-by:
Jayachandran C <jchandra@broadcom.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6270/
-
Deng-Cheng Zhu authored
Boot log says: pci 0000:00:0a.3: no compatible bridge window for [io 0x1000-0x103f] pci 0000:00:0a.3: no compatible bridge window for [io 0x1100-0x110f] The io resource starting point on Malta was modified by c5de50da (MIPS: Malta: Change start address to avoid conflicts.) to avoid conflicts with ACPI and SMB devices. In fact, that was not needed (and now causing southbridge ACPI missing) since 166c6370 (PCI: add pci_create_root_bus() that accepts resource list) and 7c090e5b (mips/PCI: convert to pci_scan_root_bus() for correct root bus resources) had already done the correct fix. This patch actually reverts the change made by c5de50da. And with this fix, log says: pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB These things may not be used but as part of platform resources are better off to be included. Cc: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6037/
-
Aaro Koskinen authored
Currently the supported ISA is only printed on the latest architectures. Print it also on legacy platforms. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6295/
-
Apelete Seketeli authored
The platform data already available in tree for JZ4740 USB Device Controller was previously used by an out-of-tree USB gadget driver which was not relying on the musb driver and was written by Ingenic and the Qi-Hardware community. Update platform data for JZ4740 USB device controller to be used with musb driver. Signed-off-by:
Apelete Seketeli <apelete@seketeli.net> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6265/
-
Eunbong Song authored
This patch removes CONFIG_MTD_PARTITIONS in config files for MIPS. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b2. Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6162/Signed-off-by:
Eunbong Song <eunb.song@samsung.com>
-
Paul Burton authored
There is already an init_dsp function which checks cpu_has_dsp & calls __init_dsp if it does. Make use of it instead of duplicating the same code. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Qais Yousef <qais.yousef@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6148/
-
Paul Burton authored
This patch cleans up the declaration of the resume function by replacing void pointers with their correct types. The irrelevant & incorrect comment preceeding the resume function is replaced by one documenting its function. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Qais Yousef <qais.yousef@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6146/
-
Apelete Seketeli authored
Add defconfig for the Ben NanoNote handheld computer which is built around QI_LB60 board and Ingenic JZ4740 MIPS SoC. Signed-off-by:
Apelete Seketeli <apelete@seketeli.net> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6257/
-
- 23 Jan, 2014 23 commits
-
-
Rafał Miłecki authored
Input GPIO changes can generate interrupts, but we need kind of ACK for them by changing IRQ polarity. This is required to stop hardware from keep generating interrupts and generate another one on the next GPIO state change. This code allows using GPIOs with standard interrupts and add for example GPIO buttons support. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6216/
-
Qais Yousef authored
The file uses u16 type but doesn't include its definition explicitly I was getting this error when including this header in my driver: arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’ Signed-off-by:
Qais Yousef <qais.yousef@imgtec.com> Reviewed-by:
Steven J. Hill <Steven.Hill@imgtec.com> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6212/
-
Qais Yousef authored
we want the device tree to be unflattened into non init memory so it can be accessed later by, for example, a probing function of a driver module. Signed-off-by:
Qais Yousef <qais.yousef@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6210/
-
Qais Yousef authored
Signed-off-by:
Qais Yousef <qais.yousef@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6209/
-
Qais Yousef authored
The defaults are not always applicable and it makes it hard for the bootloader to override them. By removing it we give the bootloader full control over what command line parameters to pass. Without this change we will need to modify the built-in dtb to add bootloader cmd line parameters or do some work to append them after we unflatten the device tree. Sead3 is a development board, that's why we want to be able to change boot parameters on the fly from the bootloader. Signed-off-by:
Qais Yousef <qais.yousef@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6208/
-
Qais Yousef authored
if the user sets memsize parameter in commandline or bootloader environment, we use it to modify the built-in dtb memory size Signed-off-by:
Qais Yousef <qais.yousef@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6207/
-
Florian Fainelli authored
Update the early_printk code to include linux/serial_bcm63xx.h which provides the definitions for the UART block registers. While at it, remove the inclusion of serial_bcm63xx.h which was just there to allow smooth transition. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6203/
-
Florian Fainelli authored
Now that the UART block defines have been moved to a separate file, include that one and do not longer rely on the MIPS-specific bcm63xx_regs.h header file. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6204/
-
Florian Fainelli authored
Move the BCM63XX UART driver definitions to include/linux/serial_bcm63xx.h such that we do not rely on the MIPS BCM63XX code to provide these for us. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6202/
-
Florian Fainelli authored
bcm_{readl,writel} macros expand to __raw_{readl,writel}, use these directly such that we do not rely on the platform to provide these for us. As a result, we no longer use bcm63xx_io.h, so remove that inclusion too. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6201/
-
Florian Fainelli authored
bcm63xx_irqs.h is included but we are not using anything from it, drop that include. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6205/
-
Steven J. Hill authored
Remove usage of -mno-jals compiler flag when building a pure microMIPS kernel. The -mno-jals flag only ever existed within Mentor toolchains. Dropping this flag allows all FSF toolchains to work. Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6200/
-
David Daney authored
This will be needed by the next patch to use said nodes for probing via the device tree. Signed-off-by:
David Daney <david.daney@cavium.com> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6185/
-
Paul Burton authored
This patch switches Malta from using the MIPS implementation of early printk with Malta's prom_putchar to using the generic 8250_early implementation. This offers a couple of advantages: - We duplicate less generic code. - The UART can be initialised rather than being reliant upon inheriting a valid setup from the bootloader. The Malta console_config function is extended to initialise the early console if no earlycon= kernel parameter is provided, inheriting the modetty0 bootloader environment if present and falling back to a default 38400n8r setup if not. This matches the behaviour used for the regular console= parameter. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6183/
-
Paul Burton authored
This patch causes the kernel to mux the SERIRQ interrupt to the SERIRQ pin of the PIIX4 and to enable that interrupt. The kernel depends upon the interrupt when using the SuperIO UARTs (ttyS0 & ttyS1) but previously would not configure it, instead relying upon the bootloader having done so. If that is not the case then the typical result is that the system appears to hang once it reaches userland as no output is displayed on the UART. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6182/
-
Paul Burton authored
The RTC is used on Malta to estimate the clock frequency of the CPU & optionally the GIC. However the kernel previously did not initialise the RTC, instead relying upon the bootloader having done so. In order to minimise dependencies which the kernel has upon the bootloader this patch causes the kernel to initialise the RTC itself prior to making use of it. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6184/
-
Paul Burton authored
This variable seems to have been copied from Malta when SEAD3 support was introduced, but is likewise unused. Remove it. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6172/
-
Paul Burton authored
This variable was introduced by commit 96348c8f (of Ralf's historic Linux/MIPS repository) "Remaining fixes for MIPS's eval boards." but I don't see any use of it either then or now. Remove it. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6171/
-
Aaro Koskinen authored
Export symbols needed by the octeon-ethernet driver. The patch fixes a build failure with CONFIG_OCTEON_ETHERNET=m. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6166/
-
Guenter Roeck authored
The following build error is seen if CONFIG_32BIT is undefined, CONFIG_64BIT is defined, and CONFIG_MIPS32_O32 is undefined. asm/syscall.h: In function 'mips_get_syscall_arg': arch/mips/include/asm/syscall.h:32:16: error: unused variable 'usp' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: c0ff3c53 ('MIPS: Enable HAVE_ARCH_TRACEHOOK') Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6160/
-
Aaro Koskinen authored
The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is trying enumerate a non-existant interface. The actual hang happens in cvmx_helper_interface_get_mode(): mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); when interface == 4. We can avoid this situation by first checking that the interface exists in the DTB. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6101/
-
Aaro Koskinen authored
When booting with in-kernel DTBs, the pruning code will enumerate interfaces 0-4. However, there is memory reserved only for 4 so some other data will get overwritten by cvmx_helper_interface_enumerate(). Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6102/
-
Antony Pavlov authored
Signed-off-by:
Antony Pavlov <antonynpavlov@gmail.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5927/
-
- 22 Jan, 2014 7 commits
-
-
Felix Fietkau authored
Only one MIPS development board actually supports enabling/disabling DMA coherency at runtime, so it's not a good idea to push the overhead of checking that configuration setting onto every other supported target as well. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5912/
-
Steven J. Hill authored
Clean-up code according to the 'checkpatch.pl' script. Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6097/Reviewed-by:
John Crispin <blogic@openwrt.org>
-
Deng-Cheng Zhu authored
Malta with multi-core CM platforms can now use APRP functionality. Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6096/
-
Deng-Cheng Zhu authored
This patch adds RTLX API support for platforms having a CMP. Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6095/Reviewed-by:
John Crispin <blogic@openwrt.org>
-
Deng-Cheng Zhu authored
Split the RTLX functionality in preparation for adding support for CMP platforms. Common functions remain in the original file and a new file contains code specific to platforms that do not have a CMP. Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6093/Reviewed-by:
John Crispin <blogic@openwrt.org>
-
Deng-Cheng Zhu authored
This patch adds VPE loader support for platforms having a CMP. Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6092/
-
Deng-Cheng Zhu authored
Split the VPE functionality in preparation for adding support for CMP platforms. Common functions remain in the original file and a new file contains code specific to platforms that do not have a CMP present. Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by:
Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by:
Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by:
John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6094/
-