Merge tag 'omap-for-v4.4/soc-clean-up' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Minimal omap SoC changes for v4.4 merge window. As we've spent quite a
bit of time sorting out regressions for v4.3 and are very late with
these, I've kept the changes down to minimum:

- A series of timer changes from Felipe Balbi to get us closer to
  moving the remaining timer code into drivers

- A series of hwmod clean-up changes queued by Paul Walmsley

- SoC detection clean-up to use soc_is instead of cpu_is as CPU is
  within the SoC and is confusing naming. The rest we can now change
  along with the other clean-up

* tag 'omap-for-v4.4/soc-clean-up' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
  ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
  ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
  ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
  arm: omap2: board-generic: use omap4_local_timer_init for AM437x
  ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
  ARM: OMAP: Remove duplicated operand in OR operation
  clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
  ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
  ARM: OMAP2+: Rename cpu_is macros to soc_is
  arm: omap2: timer: limit hwmod usage to non-DT boots
  arm: omap2+: select 32k clocksource driver
  clocksource: add TI 32.768 Hz counter driver
  arm: omap2: timer: rename omap_sync32k_timer_init()
  arm: omap2: timer: always call clocksource_of_init() when DT
  arm: omap2: timer: move realtime_counter_init() around
  arm: omap2: timer: provide generic sync32k_timer_init function
  arm: omap2: timer: remove __omap_gptimer_init()
  arm: omap2: timer: add a gptimer argument to sync32k_timer_init()
  arm: omap2: timer: get rid of obfuscating macros
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'for-v4.4/omap-hwmod-cleanup-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.4/soc

ARM: OMAP2+: hwmod cleanup for v4.4

Remove some superfluous data from the OMAP2+ hwmod data files.  Mostly
this is a result of data being moved to DT files.  Nothing too
controversial, here.

Basic build, boot, and PM test results are available here:

http://www.pwsan.com/omap/testlogs/hwmod-cleanup-a-for-v4.4/20151023130140/

Remove the mailbox attribute data, irq info and hwmod addr space
data that are used for creating the legacy-style mailbox devices,
there is no need for these as the support for legacy-mode for this
IP is being dropped.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

The legacy-style device creation logic for hwspinlock
has been removed after the DT-support was added to the
driver. The hwmod addr space for spinlock is therefore
no longer needed, so remove it.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

The legacy-style device creation logic for hwspinlock
has been removed after the DT-support was added to the
driver. The hwmod addr space for spinlock is therefore
no longer needed, so remove it.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

GPMC address information is provided by device tree. No longer need
to include this information within hwmod.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
[paul@pwsan.com: fixed chip names in subject line]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

This is the pxa changes for v4.4 cycle.

This cycle is bigger than usual :
 - magician was greatly enhanced (new IPs discovered, ...)
 - almost all legacy board files have been updated to the
   new PWM API (mostly for backlight control)
 - some minor fixes in raumfeld, z2 and mioa701

* tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux: (44 commits)
  ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
  ARM: pxa: raumfeld: make some variables static
  ARM: pxa: magician: Remove pdata for pasic3-leds
  ARM: pxa: magician: Add support for PXA27x UDC
  ARM: pxa: magician: Add support for MAX1587A Vcore regulator
  ARM: pxa: magician: Change comments to be more informative
  ARM: pxa: magician: Move platform_add_devices() to the end of magician_init()
  ARM: pxa: magician: Add missing regulator for PWM backlight
  ARM: pxa: magician: Add debug message for backlight brightness function
  ARM: pxa: magician: Remove definition of the STUART port
  ARM: pxa: magician: Fix wrongly enabled USB host ports
  ARM: pxa: magician: Fix support for Intel Strata NOR Flash
  ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
  ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
  ARM: pxa: magician: Fix and add charging detection functions
  ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
  ARM: pxa: magician: Rename charger cable detection EGPIOs
  ARM: pxa: magician: Optimize powerup delays for Samsung LCD
  ARM: pxa: magician: Rename abstract LCD GPIOs
  ARM: pxa: magician: Add new discovered EGPIO pins
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu cleanup for 4.4 (part 2)

Remove code related to Armada 375 Z1 stepping no more supported in mainline

* tag 'mvebu-cleanup-4.4-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: remove the workaround imprecise abort fault handler
Signed-off-by: Olof Johansson <olof@lixom.net>

Now that __cpuinit has been removed, the __ref markings on these
functions are useless. Remove them. This also reduces the size of
the multi_v7_defconfig image:

$ size before after
   text    data     bss     dec     hex filename
   12683578        1470996  348904 14503478         dd4e36 before
   12683274        1470996  348904 14503174         dd4d06 after

presumably because now we don't have to jump to code in the
.ref.text section and/or the noinline marking is removed.

Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Cc: <spear-devel@list.st.com>
Cc: <linux-tegra@vger.kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Andy Gross <agross@codeaurora.org>
Acked-by: Viresh Kumar <vireshk@kernel.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Now that the IRQCHIP_DECLARE macro has been moved to linux/irqchip.h,
it becomes possible to cleanup the open-coded versions of the same
macro that have been added to some private irqchips implementations.

Cc: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Kukjin Kim <kgene@kernel.org>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-cleanup2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Second Round of Renesas ARM Based SoC Cleanup for v4.4

* Remove now unused legacy pm domain code
* Add missing of_node_put to pm-rmobile
* Corresct spelling of interrupt-names in renesas-memory-controller binding
  documentation
* Correct signdness of CPU id in shmobile apmu implementation
* Make some functions static as appropriate

* tag 'renesas-cleanup2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: R-Mobile: add missing of_node_put
  ARM: shmobile: dt: Rename incorrect interrupt related binding
  ARM: shmobile: apmu: correct type of CPU id
  ARM: shmobile: r8a7779: Remove legacy PM Domain remainings
  ARM: shmobile: r8a7778: Make r8a7778_init_irq_dt() static
  ARM: shmobile: smp: Make shmobile_smp_apmu_cpu_shutdown() static
Signed-off-by: Olof Johansson <olof@lixom.net>

AM437x-based boards, can use omap4_local_timer_init()
just fine. Let's use that instead.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ELM address information is provided by device tree. No longer need
to include this information within hwmod.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
[paul@pwsan.com: fixed chip names in subject line; dropped the OMAP4 section
 since the OMAP4 SoC DTS file doesn't have the ELM address space documented
 yet]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

Commit b483a4a5 ("ARM: OMAP4+: hwmod data: Don't prevent RESET of
USB Host module") added the SYSC_HAS_RESET_STATUS flag to both OMAP4
and OMAP5 USB host module hwmon sysconfig but that flag was already
set for OMAP5. So now the flag appears twice in the expression.

make coccicheck complains with the following message:

omap_hwmod_54xx_data.c:1846:37-58: duplicated argument to & or |
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>

the new ti 32k clocksource driver should depend on
GENERIC_CLOCKSOURCE because of its reliance on
sched_clock_register().

Let's enable that to avoid any possible build errors
and/or warnings on randbuilds.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge branch 'for-tony' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into omap-for-v4.4/soc

The z2 machine calls pxa27x_set_pwrmode() in order to power off
the machine, but this function gets discarded early at boot because
it is marked __init, as pointed out by kbuild:

WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode()
The function z2_power_off() references
the function __init pxa27x_set_pwrmode().
This is often because z2_power_off lacks a __init
annotation or the annotation of pxa27x_set_pwrmode is wrong.

This removes the __init section modifier to fix rebooting and the
build error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: ba4a90a6 ("ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

This fixes the following sparse warnings:

	arch/arm/mach-pxa/raumfeld.c:510:24: warning: symbol 'raumfeld_w1_gpio_device' was not declared. Should it be static?
	arch/arm/mach-pxa/raumfeld.c:632:31: warning: symbol 'raumfeld_spi_platform_data' was not declared. Should it be static?
	arch/arm/mach-pxa/raumfeld.c:851:28: warning: symbol 'audio_va_initdata' was not declared. Should it be static?
	arch/arm/mach-pxa/raumfeld.c:883:28: warning: symbol 'audio_dummy_initdata' was not declared. Should it be static?
	arch/arm/mach-pxa/raumfeld.c:931:28: warning: symbol 'max8660_v6_subdev_data' was not declared. Should it be static?
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Currently apart from dra7, omap5 and amx3 all the other SoCs
are identified using cpu_is_* functions which is not right since
they are all SoCs(System on Chips). Hence changing the SoC
identification code to use soc_is instead of cpu_is and keeping
defines for cpu_is where needed. This allows us to replace the
rest of cpu_is usage along with other fixes as needed.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[tony@atomide.com: reworked the soc.h changes to minimum]
Signed-off-by: Tony Lindgren <tony@atomide.com>

The naming for the cpu_is macros is confusing as the CPU is separate
and within the SoC. Let's rename all the macros to soc_is, and let's
define cpu_is also for the ones still in use. Then we can just remove
the cpu_is macros once the users are fixed up.

To keep the chances of breaking anything, the changes were
generated with the following regular expressions:

s/cpu_is/soc_is/g
s/CPU/SoC/g

Then the list of existing cpu_is users was generated with:

$ $ grep -o -e 'cpu_is_.\+()' arch/arm/mach-omap2/*.[chS] | \
	cut -d: -f2 | sort | uniq

And added to the end of the soc.h.

I decided to rework the earlier patches by Keerthy <j-keerthy@ti.com>
to keep changes down to minimum to avoid potential errors and stick
to just search and replace.
Signed-off-by: Tony Lindgren <tony@atomide.com>

now that we have a working 32k clocksource driver,
we can limit HWMOD usage to non-DT boots and rely
on clocksource_of_init() every time we boot
with DT.

While at that, also make sure that we don't disable
the 32-counter device so it gets probed by its driver.
Signed-off-by: Felipe Balbi <balbi@ti.com>

Now that we have a 32k clocksource driver, let's
select it for OMAP2PLUS builds.
Signed-off-by: Felipe Balbi <balbi@ti.com>

Introduce a new clocksource driver for Texas
Instruments 32.768 Hz device which is available
on most OMAP-like devices.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

this function is not only about the 32k sync
timer, it's OMAP's generic init_time implementation.

Let's rename it to make that detail easier to
notice.
Signed-off-by: Felipe Balbi <balbi@ti.com>

If booting with DT, let's make sure to always
call clocksource_of_init() as this will make
it easier to move timer code to drivers/clocksource
in the future.
Signed-off-by: Felipe Balbi <balbi@ti.com>

no functional changes, just moving that function
closer to its calling location.
Signed-off-by: Felipe Balbi <balbi@ti.com>

instead of constantly defining a small wrapper
around __omap_sync32k_timer_init(), let's define
a generic one which can be used by all OMAPs.
Signed-off-by: Felipe Balbi <balbi@ti.com>

__omap_sync32k_timer_init(), now takes the clock
source as a parameter. This means we no longer need
__omap_gptimer_init().

Note that __omap_sync32k_timer_init() will be
renamed in a follow-up patch as it's not longer 32k
source specific.
Signed-off-by: Felipe Balbi <balbi@ti.com>

as it turns out, __omap_gptimer_init() and
__omap_sync32k_timer_init() are essentially
the same thing, but __omap_gptimer_init() wants
to always use gptimer.

Instead of forcing all those devices to pass
a use_gptimer cmdline argument, we add a new
function argument to __omap_sync32k_timer_init()
in preparation to deleting __omap_gptimer_init().

On a follow-up patch, we will remove uses of
__omap_gptimer_init() and replace them with
__omap_sync32k_timer_init() and pass the last
argument as true.
Signed-off-by: Felipe Balbi <balbi@ti.com>

those macros just make it a lot more difficult
to grep around and actually find similarities.

In this patch, we will simply remove them and
replace with actual functions and later commits
will come to further clean this up.
Signed-off-by: Felipe Balbi <balbi@ti.com>

omap4_local_timer_init() can be used by other
platforms as is. At least AM437x wants to use
it. Instead of making omap4-only and providing
a stub for builds without OMAP4, we can just
make sure that function is always available
for all SoCs that need it.
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Merge tag 'omap-for-v4.4/cleanup-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Merge "Clean-up for omaps for v4.4 merge window" from Tony Lindgren:

- Remove legacy omap3 ISP code as the driver is DT only

- Remove VoiceBlue board support as it's been unused over
  10 years now

- Remove unused polarity control macros for TWL

- Remove two unneeded semicolons

- Remove unused core dpll code for reprogramming the rates

Note that this branch is against v4.3-rc4 as that contains critical
MMC related fixes to boot with MMC working on most omaps.

* tag 'omap-for-v4.4/cleanup-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: clock: remove un-used core dpll re-program code
  ARM: OMAP2+: Remove unneeded semicolons
  ARM: OMAP3: vc: Remove unused macros
  ARM: OMAP1: Remove board support for VoiceBlue board
  ARM: OMAP2+: Remove legacy OMAP3 ISP instantiation

Merge "mvebu cleanup for 4.4 (part 1)" from Gregory CLEMENT:

use the CR_C define instead of a literal value

* tag 'mvebu-cleanup-4.4-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: Use a CR_C constant instead of a hard-coded one

This is not needed anymore. Handling a potentially pending imprecise
external abort left behind by the bootloader is now done in a slightly
safer way inside the common ARM startup code.

[gregory.clement@free-electrons.com: Beside the Armada 375 Z1 which
initially required this, is no more supported]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The pasic3-leds driver was never in vanilla kernel. Actual configuration
data for a hypothetical driver does not describe hardware completely, so
remove them.

This patch prepare HTC Magician machine code to pasic3-leds driver
addition.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

A PXA27x SoC supports USB device mode, this patch adds support for that.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

HTC Magician contains a MAX1587A voltage regulator for a Vcore supply.
The Vcore regulation is required for a CPU speed switching. This patch adds
declaration for the max1586 driver.

Notice:

- MAX1587A version does not support the V6 (USIM) output.
- A boost resistor was directly measured for a board_id 0x3a.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

This patch changes the comments in the HTC Magician machine source code
to better describe used devices and interfaces.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

This patch moves platform_add_devices() (standard declaration of devices)
outside of the platform specific device declarations. Moving to the end
of the magician_init() clarifies the source code (standard and specific
declaration are not mixed).
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Add a fake regulator, which is required for the correct initialization
of the PWM backlight driver.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
[ added a missing include for fixed regulator ]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>