- 08 Feb, 2021 16 commits
-
-
Mark Brown authored
Merge series "MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec" from Hans de Goede <hdegoede@redhat.com>: Hi All, Here is v4 of my series to add support for Intel Bay Trail based devices which use a WM5102 codec for audio output/input. This was developed and tested on a Lenovo Yoga Tablet 1051L. The MFD and ASoC parts do not have any build-time dependencies on each other. But the follow-up jack-detect series does have patches depending on each-other and on this series. So IMHO it would be best if this entire series would be merged through the MFD tree to make merging the follow-up series easier. Mark, if that is ok with you (and you are happy with the ASoC changes) can you please Ack this ? Changes in v4: - Add a comment to the irq-flags override explaining that theoretically DSDTs using IRQF_TRIGGER_FALLING could be correct on boards where the IRQ controller does not support active low level interrupts Changes in v3: - Fix compilation error when CONFIG_ACPI is not set Changes in v2: - Split my WM5102 work into 2 series, one series adding basic support for Bay Trail boards with a WM5102 codec and a second series with the jack-detect work - Various other minor code tweaks Hans de Goede (4): mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1") mfd: arizona: Replace arizona_of_get_type() with device_get_match_data() mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr() Pierre-Louis Bossart (1): ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102 drivers/mfd/arizona-core.c | 11 - drivers/mfd/arizona-i2c.c | 11 +- drivers/mfd/arizona-spi.c | 138 +++++- drivers/mfd/arizona.h | 9 - sound/soc/intel/boards/Kconfig | 12 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcr_wm5102.c | 465 ++++++++++++++++++ .../intel/common/soc-acpi-intel-byt-match.c | 16 + sound/soc/intel/common/soc-intel-quirks.h | 25 + 9 files changed, 661 insertions(+), 28 deletions(-) create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c Regards, Hans -
Pierre-Louis Bossart authored
Add a new ASoc Machine driver for Intel Baytrail platforms with a Wolfson Microelectronics WM5102 codec. This is based on a past contributions [1] from Paulo Sergio Travaglia <pstglia@gmail.com> based on the Levono kernel [2] combined with insights in things like the speaker GPIO from the android-x86 android port for the Lenovo Yoga Tablet 2 1051F/L [3]. [1] https://patchwork.kernel.org/project/alsa-devel/patch/593313f5.3636c80a.50e05.47e9@mx.google.com/ [2] https://github.com/lenovo-yt2-dev/android_kernel_lenovo_baytrail/blob/cm-12.1/sound/soc/intel/board/byt_bl_wm5102.c [3] https://github.com/Kitsune2222/Android_Yoga_Tablet_2-1051F_Kernel The original machine driver from the Android ports was a crude modified copy of bytcr_rt5640.c adjusted to work with the WM5102 codec. This version has been extensively reworked to: 1. Remove all rt5640 related quirk handling. to the best of my knowledge this setup is only used on the Lenovo Yoga Tablet 2 series (8, 10 and 13 inch models) which all use the same setup. So there is no need to deal with all the variations with which we need to deal on rt5640 boards. 2. Rework clock handling, properly turn off the FLL and the platform-clock when they are no longer necessary and don't reconfigure the FLL unnecessarily when it is already running. This fixes a number of: "Timed out waiting for lock" warnings being logged. 3. Add the GPIO controlled Speaker-VDD regulator as a DAPM_SUPPLY This only adds the machine driver and ACPI hooks, the BYT-CR detection quirk which these devices need will be added in a separate patch. BugLink: https://github.com/thesofproject/linux/issues/2485Co-authored-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210120214957.140232-6-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Some Bay Trail systems: 1. Use a non CR version of the Bay Trail SoC 2. Contain at least 6 interrupt resources so that the platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround non CR systems which list their IPC IRQ at index 0 despite being non CR does not work 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5 Add a DMI quirk table to check for the few known models with this issue, so that the right IPC IRQ index is used on these systems. Reviewed-by:
-
Paul Cercueil authored
Add the ingenic,jz4760b-codec and ingenic,jz4760-codec compatible strings. In the process, convert the previous compatible strings to use an enum instead. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210123140958.12895-1-paul@crapouillou.netSigned-off-by:
-
Christophe Branchereau authored
Add support for the internal codec found in the JZ4760 SoC from Ingenic. Signed-off-by:
Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by:
-
Paul Cercueil authored
No need to show the options to build Ingenic-specific drivers on all MIPS kernel configurations if Ingenic SoCs support is not enabled. Signed-off-by:
-
Mark Brown authored
Merge tag 'ib-mfd-asoc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into asoc-5.12 Immutable branch between MFD and [XXX] due for the v5.12 merge window
-
Mark Brown authored
The below patch series are to support Audio over HDMI. The modification in this patch series shall allow I2S driver to playback standard PCM format and IEC958 encoded format to the ADV7511 HDMI chip. ALSA IEC958 plugin will be used to compose the IEC958 format. Existing hdmi-codec driver only support standard pcm format. Support of IEC958 encoded format passdown from ALSA IEC958 plugin is needed so that the IEC958 encoded data can be streamed to the HDMI chip. Sia Jee Heng (4): ASoC: codec: hdmi-codec: Support IEC958 encoded PCM format drm: bridge: adv7511: Support I2S IEC958 encoded PCM format dt-bindings: sound: Intel, Keembay-i2s: Add hdmi-i2s compatible string ASoC: Intel: KMB: Support IEC958 encoded PCM format .../bindings/sound/intel,keembay-i2s.yaml | 1 + drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 + .../gpu/drm/bridge/adv7511/adv7511_audio.c | 6 ++ include/sound/hdmi-codec.h | 5 ++ sound/soc/codecs/hdmi-codec.c | 4 +- sound/soc/intel/keembay/kmb_platform.c | 73 ++++++++++++++++++- sound/soc/intel/keembay/kmb_platform.h | 1 + 7 files changed, 89 insertions(+), 2 deletions(-) base-commit: 2557c711b87cd42bb22be9ca6ff3fce038624f30 -- 2.18.0
-
Mark Brown authored
This series renames exported functions from audio graph for a better global visibility. In doing so update the references in audio graph and Tegra audio graph card drivers. Changelog ========= v2 -> v3: --------- [Patch v3 1/2]: - Squashed "patch v2 1/3" and "patch v2 2/3". Updated commit message accordingly. - Add "Acked-by" tag from Morimoto-san. [Patch v3 2/2]: - Add "Acked-by" tag from Morimoto-san. v1 -> v2: --------- [Patch v2 1/3]: - Rename graph_parse_of() to audio_graph_parse_of() and graph_card_probe() to audio_graph_card_probe() as well. - Update above references in audio graph driver. [Patch v2 2/3]: New patch - Update references for audio_graph_parse_of() and audio_graph_card_probe() in Tegra graph driver. - Add "Depends-on" tag [Patch v2 3/3]: - Update commit message to add "Depends-on" tag. Sameer Pujar (2): ASoC: audio-graph: Rename functions needed for export ASoC: tegra: Add driver remove() callback include/sound/graph_card.h | 6 ++++-- sound/soc/generic/audio-graph-card.c | 17 +++++++++-------- sound/soc/tegra/tegra_audio_graph_card.c | 9 +++++---- 3 files changed, 18 insertions(+), 14 deletions(-) -- 2.7.4 -
Fabio Estevam authored
The 'imx' field is not used anywhere, so get rid of it. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210206142753.536459-1-festevam@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
The only usage of these is to assign their address to the 'ops' field in the snd_soc_dai_driver struct, which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by:
-
Sia Jee Heng authored
Add intel,keembay-hdmi-i2s compatible string to support the HDMI interface. Signed-off-by:
Sia Jee Heng <jee.heng.sia@intel.com> Link: https://lore.kernel.org/r/20210204014258.10197-4-jee.heng.sia@intel.comSigned-off-by:
-
Sia Jee Heng authored
Support ALSA IEC958 plugin for KeemBay I2S driver. Bit manipulation needed as IEC958 format supported by ADV7511 HDMI chip is not compatible with the ALSA IEC958 plugin format. Signed-off-by:
-
Sia Jee Heng authored
Existing hdmi-codec driver only support standard pcm format. Support of IEC958 encoded format pass from ALSA IEC958 plugin is needed so that the IEC958 encoded data can be streamed to the HDMI chip. Signed-off-by:
-
Sameer Pujar authored
There is cleanup required, related to release of phandles, during driver removal and hence point remove callback to audio_graph_remove(). Fixes: 202e2f77 ("ASoC: tegra: Add audio graph based card driver") Depends-on: "ASoC: audio-graph: Rename functions needed for export" Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/1612719418-5858-3-git-send-email-spujar@nvidia.comSigned-off-by:
-
Sameer Pujar authored
Following functions are renamed for a better global visibility. graph_card_probe() --> audio_graph_card_probe() graph_parse_of() --> audio_graph_parse_of() graph_remove() --> audio_graph_remove() [exported as well] The references of these are updated in audio graph and Tegra audio graph card drivers. Signed-off-by:
-
- 05 Feb, 2021 15 commits
-
-
Geert Uytterhoeven authored
To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130022.1646427-1-geert+renesas@glider.beSigned-off-by:
-
Shengjiu Wang authored
The commit e7bbb7ac ("dmaengine: add peripheral configuration") adds peripheral configuration for dma_slave_config. This configuration is useful for some audio peripherals, for example, the peripheral supports multi fifos, we can let the DMA know which fifos are selected. So also add this configuration for snd_dmaengine_dai_dma_data. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1612509985-11063-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Mark Brown authored
Merge series "ASoC: stm32: i2s: add master clock provider" from Olivier Moysan <olivier.moysan@foss.st.com>: Add master clock generation support in STM32 I2S driver. Resend of patch https://lkml.org/lkml/2020/9/11/264 Olivier Moysan (2): ASoC: dt-bindings: add mclk provider support to stm32 i2s ASoC: stm32: i2s: add master clock provider .../bindings/sound/st,stm32-i2s.yaml | 4 + sound/soc/stm/stm32_i2s.c | 310 +++++++++++++++--- 2 files changed, 270 insertions(+), 44 deletions(-) -- 2.17.1
-
Jiaxin Yu authored
Sets playback and capture constraints to S16_LE, stereo, 48kHz. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1612513012-27688-1-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Olivier Moysan authored
Add master clock generation support in STM32 I2S driver. The master clock provided by I2S can be used to feed a codec. Signed-off-by:
Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20210205104404.18786-3-olivier.moysan@foss.st.comSigned-off-by:
-
Olivier Moysan authored
Add master clock provider support to STM32 I2S. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mark Brown authored
-
Mark Brown authored
Merge series "ASoC: SOF/Intel/SoundWire: add missing quirks and DMIC support" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: HP Spectre x360 convertible devices rely on a mixed SoundWire+DMIC configuration which wasn't well supported. This lead to the discovery that we missed the TGL_HDMI quirk on a number of Dell devices, the addition of DMIC autodetection (based on NHLT tables), the addition of new component strings needed by UCM, and work-arounds due to problematic DSDT tables. Bard Liao (1): ASoC: Intel: sof_sdw: add trace for dai links Guennadi Liakhovetski (1): ASoC: SOF: Intel: HDA: don't keep a temporary variable Pierre-Louis Bossart (11): ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A3E ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A5E ASoC: Intel: sof_sdw: add missing TGL_HDMI quirk for Dell SKU 0A32 ASoC: Intel: sof_sdw: reorganize quirks by generation ASoC: Intel: sof-sdw: indent and add quirks consistently ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component strings ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360 ASoC: SOF: Intel: SoundWire: refine ACPI match ASoC: SOF: Intel: detect DMIC number in SoundWire mixed config ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overridden Rander Wang (1): ASoC: Intel: sof_sdw: detect DMIC number based on mach params sound/soc/intel/boards/sof_sdw.c | 131 ++++++----- .../intel/common/soc-acpi-intel-tgl-match.c | 20 ++ sound/soc/sof/intel/hda.c | 208 ++++++++++++------ 3 files changed, 241 insertions(+), 118 deletions(-) -- 2.25.1
-
Bard Liao authored
regcache sync will be done in sdw device suspend/resume functions. And we have different jack detection mechanism for SoundWire. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Follow pattern from other drivers and use cancel_work_sync() for both .remove() and .suspend(). Fixes: 03f6fc6d ('ASoC: rt5682: Add the soundwire support') Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Link: https://lore.kernel.org/r/20210204201739.25206-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Make sure the workqueues are not running after the .remove() callback, which can lead to timeout errors. A previous fix to use cancel_work_sync was applied for the suspend case but the remove case is missing Fixes: 501ef013 ('ASoC: rt711: wait for the delayed work to finish when the system suspends') Signed-off-by:
-
Pierre-Louis Bossart authored
Make sure the workqueues are not running after the .remove() callback, which can lead to timeout errors. A previous fix to use cancel_work_sync was applied for the suspend case but the remove case is missing Fixes: 5f2df2a4 ('ASoC: rt700: wait for the delayed work to finish when the system suspends') Signed-off-by:
-
Pierre-Louis Bossart authored
We missed adding the TGL_HDMI quirk which is very much needed to expose the 4 display pipelines and will be required on TGL topologies. Fixes: e787f5b5 ('ASoC: Intel: add support for new SoundWire hardware layout on TGL') Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210204203312.27112-2-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
We missed adding the TGL_HDMI quirk which is very much needed to expose the 4 display pipelines and will be required on TGL topologies. Fixes: 488cdbd8 ('ASoC: Intel: sof_sdw: add quirk for new TigerLake-SDCA device') Signed-off-by:
-
Pierre-Louis Bossart authored
We missed adding the TGL_HDMI quirk which is very much needed to expose the 4 display pipelines and will be required on TGL topologies. Fixes: 9ad9bc59 ('ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E') Signed-off-by:
-
- 04 Feb, 2021 8 commits
-
-
Mark Brown authored
The 1st and 2nd patch refactor to use asoc_substream_to_rtd(). The 3rd patch simplifies ops of Capture1 DAI link. Changes from v2[1]: - Fix typo in 3rd patch's title, s/simply/simplify/. Changes from v1[2]: - Separated from v1. [1]: https://patchwork.kernel.org/project/alsa-devel/list/?series=420919 [2]: https://patchwork.kernel.org/project/alsa-devel/list/?series=419769 Tzung-Bi Shih (3): ASoC: mediatek: mt8192-mt6359: use asoc_substream_to_rtd() ASoC: mediatek: mt8192: use asoc_substream_to_rtd() ASoC: mediatek: mt8192-mt6359: simplify ops for Capture1 DAI link sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 4 ++-- .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 24 ++++++++----------- 2 files changed, 12 insertions(+), 16 deletions(-) -- 2.30.0.365.g02bc693789-goog
-
Stephen Boyd authored
This reverts commit a06cd8cf ("ASoC: da7218: skip of_device_id table when !CONFIG_OF") because we want to make of_match_device() stop using of_match_ptr() internally, confusing compilers and causing ifdef pollution. Reported-by:
kernel test robot <lkp@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210202192016.49028-1-swboyd@chromium.orgSigned-off-by:
-
Tzung-Bi Shih authored
1. Uses rtd->dev to get the device. 2. Generalizes the variable name. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210203032201.2882158-4-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
Uses asoc_substream_to_rtd() helper. Signed-off-by:
-
Tzung-Bi Shih authored
Uses asoc_substream_to_rtd() helper. Signed-off-by:
-
Hans de Goede authored
The Intel Bay Trail (x86/ACPI) based Lenovo Yoga Tablet 2 series use a WM5102 codec connected over SPI. Add support for ACPI enumeration to arizona-spi so that arizona-spi can bind to the codec on these tablets. This is loosely based on an earlier attempt (for Android-x86) at this by Christian Hartmann, combined with insights in things like the speaker GPIO from the android-x86 android port for the Lenovo Yoga Tablet 2 1051F/L [1]. [1] https://github.com/Kitsune2222/Android_Yoga_Tablet_2-1051F_Kernel Cc: Christian Hartmann <cornogle@googlemail.com> Reviewed-by:
Lee Jones <lee.jones@linaro.org>
-
Hans de Goede authored
Replace the custom arizona_of_get_type() function with the generic device_get_match_data() helper. Besides being a nice cleanup this also makes it easier to add support for binding to ACPI enumerated devices. While at it also fix a possible NULL pointer deref of the id argument to the probe functions (this could happen on e.g. manual driver binding through sysfs). Suggested-by:
-
Hans de Goede authored
The (shared) probing code of the arizona-i2c and arizona-spi modules takes the following steps during init: 1. Call mfd_add_devices() for a set of early child-devices, this includes the arizona_ldo1 device which provides one of the core-regulators. 2. Bulk enable the core-regulators. 3. Read the device id. 4. Call mfd_add_devices() for the other child-devices. This sequence depends on 1. leading to not only the child-device being created, but also the driver for the child-device binding to it and registering its regulator. This requires the arizona_ldo1 driver to be loaded before the shared probing code runs. Add a softdep for this to both modules to ensure that this requirement is met. Note this mirrors the existing MODULE_SOFTDEP("pre: wm8994_regulator") in the wm8994 code, which has a similar init sequence. Reviewed-by:
-
- 03 Feb, 2021 1 commit
-
-
Mark Brown authored
Merge series "ASoC: soc-pcm: cleanup soc_new_pcm() and bugfix" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are soc-pcm cleanup patchset. 1) - 3) : cleanup soc_new_pcm() function 4) : cleanup dpcm_runtime_merge_xxx() function 5) : bugfix of snd_pcm_limit_hw_rates() order Kuninori Morimoto (5): 1) ASoC: soc-pcm: tidyup pcm setting 2) ASoC: soc-pcm: add soc_get_playback_capture() and simplify soc_new_pcm() 3) ASoC: soc-pcm: add soc_create_pcm() and simplify soc_new_pcm() 4) ASoC: soc-pcm: use snd_pcm_hardware at dpcm_runtime_merge_xxx() 5) ASoC: soc-pcm: fixup snd_pcm_limit_hw_rates() timing sound/soc/soc-pcm.c | 124 +++++++++++++++++++++++++++----------------- 1 file changed, 75 insertions(+), 49 deletions(-) -- 2.25.1
-
