- 16 Nov, 2020 40 commits
-
-
Jernej Skrabec authored
Allwinner R40 SoC contains video engine. Add compatible for it. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
To avoid potentially overflowing the kernel logs in the case of corrupted streams, this commit replaces an error message with a per-stream counter to be read through a driver-specific control. Applications can read the per-stream accumulated error macroblocks count. The old error message is replaced by a rate-limited debug message. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
It's possible that the VPU was initialized using just one buffer, containing only codec headers. In this case, right after the initialization and after updating the FIFO read pointer, we need to iterate through all the coda_buffer_meta and release any metas that have been already used by the VPU. This issue is affecting indirectly the bitstream buffer fill threshold, which depends on the meta end position of the first queued meta, which is passed to coda_bitstream_can_fetch_past(). Without this fix, it's possible that for certain videos, the bitstream buffer level is not filled properly, resulting in a PIC_RUN timeout. Reported-by:
Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Dafna Hirschfeld authored
Set the code of the metadata pads of the isp entity to MEDIA_BUS_FMT_METADATA_FIXED and set the width and height of their formats to 0. This solves the TODO item: "Fix pad format size for statistics and parameters entities." Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
MEDIA_BUS_FMT_METADATA_FIXED should be used when the same driver handles both sides of the link and the bus format is a fixed metadata format that is not configurable from userspace. The width and height will be set to 0 for this format. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Zhang Qilong authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in cedrus_start_streaming. We should fix it. Fixes: d5aecd28 ("media: cedrus: Implement runtime PM") Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by:
-
Zhang Qilong authored
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference imbalance in rkisp1_vb2_start_streaming, so we should fix it. Fixes: 56e3b29f ("media: staging: rkisp1: add streaming paths") Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Hsin-Yi Wang authored
Commit 9495b7e9 ("driver core: platform: Initialize dma_parms for platform devices") included dma_parms in platform_device. There's no need to allocate again. Fixes: 13483fc2 ("media: mtk-vcodec: set dma max segment size") Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by:
-
Evgeny Novikov authored
isif_probe() invokes iounmap() on error handling paths, but it does not reset the global state. So, later it can invoke iounmap() even when ioremap() fails. This is the case also for isif_remove(). The patch resets the global state after invoking iounmap() to avoid this. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
-
Sakari Ailus authored
Remove Jason Chen's e-mail address for it no longer works. Signed-off-by:
-
Hugues Fruchet authored
Fix PCLK polarity not being taken into account. Add comments about BT656 register control. Remove useless ov5640_set_stream_bt656() function. Refine comments about MIPI IO register control. Fixes: 4039b037 ("media: i2c: ov5640: Add support for BT656 mode") Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Tested-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Sakari Ailus authored
Use v4l2_get_link_freq helper and add support for sensor drivers implementing only V4L2_CID_PIXEL_RATE. Signed-off-by:
-
Sakari Ailus authored
Add a helper for obtaining the link frequency from transmitter drivers. Signed-off-by:
-
Sakari Ailus authored
Raw camera sensors connected to parallel or CSI-2 busses need to implement V4L2_CID_LINK_FREQ control so receiver drivers can configure the hardware accordingly. Document this. Also say V4L2_CID_PIXEL_RATE is recommended for such hardware. Signed-off-by:
-
Sakari Ailus authored
Remove extra "is" from sentence explaining V4L2_CID_PIXEL_RATE may be used to tell the pixel rate used by a transmitter driver. Also call V4L2_CID_PIXEL_RATE a control. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Compare the received size of the payload size, not the allocated size of the buffer that is page aligned. This way also images that aren't aligned to page size are not warned about. Also wrap a line over 80 characters. Suggested-by:
Jean-Michel Hautbois <jeanmichel.hautbois@gmail.com> Signed-off-by:
-
Tom Rix authored
Adding muliple status together loses individual failures. Check each status separately. Clean up some other returns for consistency. Fixed several coding style problems by running the file through checkpatch.pl --fix-inplace Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Alain Volmat authored
Add BA81, GBRG, GRBG, RGGB formats in the list of supported capture formats. Signed-off-by:
Alain Volmat <alain.volmat@st.com> Acked-by:
Philippe CORNU <philippe.cornu@st.com> Signed-off-by:
-
Hugues Fruchet authored
Replace dmaengine_terminate_all() by dmaengine_terminate_sync() to ensure that all pending dma operations are really finished. This is not ensured by dmaengine_terminate_all() and this API is deprecated, so better to use the _sync() variant. Signed-off-by:
-
Etienne Carriere authored
Change stm32-dcmi driver to not print an error message when the device probe operation is deferred. Signed-off-by:
Etienne Carriere <etienne.carriere@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Hugues Fruchet authored
Add support of 160x120 resolution. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Sakari Ailus authored
If starting a video buffer queue fails, the buffers are returned to videobuf2. Remove the reference to the buffer from the driver's queue as well. Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
-
Sakari Ailus authored
CIO2_IMAGE_MAX_LENGTH is the maximum height of the image. Rename it as "CIO2_IMAGE_MAX_HEIGHT" in order to better describe what it is. Suggested-by:
-
Sakari Ailus authored
Now that the values are unsigned, we can remove the explicit cast to u32. Signed-off-by:
-
Sakari Ailus authored
Use unsigned values for width, height, bit shifts and registers, effectively for all definitions that are not signed. Signed-off-by:
-
Sakari Ailus authored
The ipu3-cio2 doesn't make use of the field and this is reflected in V4L2 buffers as well as the try format. Do this in active format, too. Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Reviewed-by:
-
Sakari Ailus authored
Validate media bus code, width and height when setting the subdev format. This effectively reworks how setting subdev format is implemented in the driver. Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
-
Sakari Ailus authored
Pad format can be accessed from user space. Serialise access to it. Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
-
Sakari Ailus authored
Return actual subdev format on ipu3-cio2 subdev pads. The earlier implementation was based on an infinite recursion that exhausted the stack. Reported-by:
Tsuchiya Yuto <kitakar@gmail.com> Fixes: c2a6a07a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by:
-
Sakari Ailus authored
The existing link format validation failure debug message in media-entity.c helped to pinpoint the point of failure but provided no additional information what's wrong. Tell the user exactly why the validation failed. Signed-off-by:
-
Lad Prabhakar authored
Add support for test pattern control supported by the sensor. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Add support to read the bus-type for V4L2_MBUS_BT656 and enable BT.656 mode in the sensor if needed. For backward compatibility with older DTS where the bus-type property was not mandatory, assume V4L2_MBUS_PARALLEL as it was the only supported bus at the time. v4l2_fwnode_endpoint_alloc_parse() will not fail if 'bus-type' is not specified. Signed-off-by:
-
Lad Prabhakar authored
Parse endpoint properties using v4l2_fwnode_endpoint_alloc_parse() to determine the bus type and store it in the driver structure. Set bus_type to V4L2_MBUS_PARALLEL as it's the only supported one Signed-off-by:
-
Niklas Söderlund authored
The only supported bus for the R-Car CSI-2 driver is CSI-2 DPHY, specify this before parsing the fwnode. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
-
Niklas Söderlund authored
Use the fwnode_graph_get_endpoint_by_id() interface instead of of_graph_get_endpoint_by_regs() to fetch the fwnode. This saves translating between a device_node and fwnode_handle. Signed-off-by:
-
Niklas Söderlund authored
Add the YAML dt-bindings document for ADV7604. Signed-off-by:
-
Niklas Söderlund authored
Convert ADV7604 video decoder documentation to json-schema. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Niklas Söderlund authored
As of [1] the hpd-gpios property is optional, document it as such. 1. commit 269bd132 ("[media] media: adv7604: improve usage of gpiod API") Signed-off-by:
-
Sakari Ailus authored
Earlier it was expected that there would be more variable size endpoint properties and that most if not all drivers would need them. For that reason it was expected also that v4l2_fwnode_endpoint_parse would no longer be needed. What actually happened that not all drivers require "link-frequencies", the only variable size media endpoint property without a small upper limit. Therefore drivers that do not need that information are fine using v4l2_fwnode_endpoint_parse. So don't tell drivers to use v4l2_fwnode_endpoint_alloc_parse in all cases. Signed-off-by:
-
